FCC ID CASTPDK5C
CAS-TPDK5C, CAS TPDK5C, CASTPDK5C, CASTPDKSC, CA5TPDK5C
Tait International Limited Portable Transceiver TPDK5C
An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product.
For example, the grantee code for FCC ID: CASTPDK5C is CAS. The remaining characters of the FCC ID, TPDK5C, are often associated with the product model, but they can be random. These letters are chosen by the applicant.
In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.
Purchase on Amazon:
Portable Transceiver
- Application: Portable Transceiver
- Equipment Class: TNF - Licensed Non-Broadcast Transmitter Held to Face
- Short Link: fcc.id/CASTPDK5C
- Sources: FCC.gov | FCC.report
- Registered By: Tait International Limited - CAS (New Zealand)
| App # | Purpose | Date | Unique ID |
|---|---|---|---|
| 1 | Original Equipment | 2019-03-13 | 1Darbk3yOB/CUMiVs32MWw== |
| 2 | Original Equipment | 2019-03-14 | ko0YJXrLW8RzH+j/w7F5Dg== |
| 3 | Class II Permissive Change | 2019-08-01 | dvFkGlGnBbxErzjx76QxaQ== |
| 4 | Class II Permissive Change | 2021-03-19 | 91KizTf+q6A+643nOfsfQg== |
| 5 | Class II Permissive Change | 2021-03-19 | J4ILKJoGmdarOJfisWEKCA== |
| 6 | Class II Permissive Change | 2025-02-11 | 6odxzqbBESs3woAX7heiCw== |
| 7 | Class II Permissive Change | 2025-02-11 | GCVl/FMZz6sfTEf9HYIMsQ== |
Operating Frequencies
Exhibits
Available Exhibits
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 5 | Exhibit E Test Measurement Report SAR test report | RF Exposure Info Adobe Acrobat PDF (3937 kB) |
2021-03-19 2021-03-19 |
| 5 | Cover Letter Detailing Reason for Filing | Cover Letter(s) Adobe Acrobat PDF (128 kB) |
2021-03-19 2021-03-19 |
| 4 | Exhibit E SAR Test Measurement Report | RF Exposure Info Adobe Acrobat PDF (3937 kB) |
2021-03-19 2021-03-19 |
| 4 | Cover Letter Detailing Reason for Filing | Cover Letter(s) Adobe Acrobat PDF (128 kB) |
2021-03-19 2021-03-19 |
| 3 | Test Report | Test Report Adobe Acrobat PDF (929 kB) |
2019-08-01 2019-08-01 |
| 3 | Cover Letter Requesting Class 2 Permissive Change | Cover Letter(s) Adobe Acrobat PDF (54 kB) |
2019-08-01 2019-08-01 |
| 2 | Exhibit C RE Test Setup photographs | Test Setup Photos Adobe Acrobat PDF (705 kB) |
2019-03-14 2019-03-14 |
| 2 | Exhibit E Test Measurement Report per 2 1033 b6 | Test Report Adobe Acrobat PDF (2906 kB) |
2019-03-14 2019-03-14 |
| 2 | Exhibit D Users Manual per 2 1033 b3 | Users Manual Adobe Acrobat PDF (2099 kB) |
2019-03-14 2019-03-14 |
| 2 | Exhibit C Internal Photographs per 2 1033 b7 | Internal Photos Adobe Acrobat PDF (2021 kB) |
2019-03-14 2019-03-14 |
| 2 | Exhibit C External Photographs per 2 1033 b7 | External Photos Adobe Acrobat PDF (1648 kB) |
2019-03-14 2019-03-14 |
| 2 | Exhibit A ID Label and location per 2 1033 b7 | ID Label/Location Info Adobe Acrobat PDF (497 kB) |
2019-03-14 2019-03-14 |
| 2 | Cover Letter Requesting Confidentiality | Cover Letter(s) Adobe Acrobat PDF (19 kB) |
2019-03-14 2019-03-14 |
| 2 | Cover Letter Detailing Compliance | Cover Letter(s) Adobe Acrobat PDF (55 kB) |
2019-03-14 2019-03-14 |
| 1 | Exhibit E Test Measurement Report per 2 1033 c14 | Test Report Adobe Acrobat PDF (2633 kB) |
2019-03-13 2019-03-13 |
| 1 | Misc RF Exposure Exhibits | RF Exposure Info Adobe Acrobat PDF (5057 kB) |
2019-03-13 2019-03-13 |
| 1 | Exhibit D Users Manual per 2 1033 c3 | Users Manual Adobe Acrobat PDF (2099 kB) |
2019-03-13 2019-03-13 |
| 1 | Exhibit C Internal Photographs per 2 1033 c12 | Internal Photos Adobe Acrobat PDF (2021 kB) |
2019-03-13 2019-03-13 |
| 1 | Exhibit C External Photographs per 2 1033 b7 | External Photos Adobe Acrobat PDF (1648 kB) |
2019-03-13 2019-03-13 |
| 1 | Exhibit A ID Label and location per 2 1033 c2 and c11 | ID Label/Location Info Adobe Acrobat PDF (497 kB) |
2019-03-13 2019-03-13 |
| 1 | Cover Letter Requesting Confidentiality | Cover Letter(s) Adobe Acrobat PDF (19 kB) |
2019-03-13 2019-03-13 |
| 1 | Cover Letter Stating Justification | Cover Letter(s) Adobe Acrobat PDF (69 kB) |
2019-03-13 2019-03-13 |
| 1 | Cover Letter for Extended Frequency Range | Cover Letter(s) Adobe Acrobat PDF (83 kB) |
2019-03-13 2019-03-13 |
APP # 5 (2021-03-19)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 5 | Exhibit E Test Measurement Report SAR test report | RF Exposure Info Adobe Acrobat PDF (3937 kB) |
2021-03-19 00:00:00 2021-03-19 00:00:00 |
| 5 | Cover Letter Detailing Reason for Filing | Cover Letter(s) Adobe Acrobat PDF (128 kB) |
2021-03-19 00:00:00 2021-03-19 00:00:00 |
APP # 4 (2021-03-19)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 4 | Exhibit E SAR Test Measurement Report | RF Exposure Info Adobe Acrobat PDF (3937 kB) |
2021-03-19 00:00:00 2021-03-19 00:00:00 |
| 4 | Cover Letter Detailing Reason for Filing | Cover Letter(s) Adobe Acrobat PDF (128 kB) |
2021-03-19 00:00:00 2021-03-19 00:00:00 |
APP # 3 (2019-08-01)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | Test Report | Test Report Adobe Acrobat PDF (929 kB) |
2019-08-01 00:00:00 2019-08-01 00:00:00 |
| 3 | Cover Letter Requesting Class 2 Permissive Change | Cover Letter(s) Adobe Acrobat PDF (54 kB) |
2019-08-01 00:00:00 2019-08-01 00:00:00 |
APP # 2 (2019-03-14)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Exhibit C RE Test Setup photographs | Test Setup Photos Adobe Acrobat PDF (705 kB) |
2019-03-14 00:00:00 2019-03-14 00:00:00 |
| 2 | Exhibit E Test Measurement Report per 2 1033 b6 | Test Report Adobe Acrobat PDF (2906 kB) |
2019-03-14 00:00:00 2019-03-14 00:00:00 |
| 2 | Exhibit D Users Manual per 2 1033 b3 | Users Manual Adobe Acrobat PDF (2099 kB) |
2019-03-14 00:00:00 2019-03-14 00:00:00 |
| 2 | Exhibit C Internal Photographs per 2 1033 b7 | Internal Photos Adobe Acrobat PDF (2021 kB) |
2019-03-14 00:00:00 2019-03-14 00:00:00 |
| 2 | Exhibit C External Photographs per 2 1033 b7 | External Photos Adobe Acrobat PDF (1648 kB) |
2019-03-14 00:00:00 2019-03-14 00:00:00 |
| 2 | Exhibit A ID Label and location per 2 1033 b7 | ID Label/Location Info Adobe Acrobat PDF (497 kB) |
2019-03-14 00:00:00 2019-03-14 00:00:00 |
| 2 | Cover Letter Requesting Confidentiality | Cover Letter(s) Adobe Acrobat PDF (19 kB) |
2019-03-14 00:00:00 2019-03-14 00:00:00 |
| 2 | Cover Letter Detailing Compliance | Cover Letter(s) Adobe Acrobat PDF (55 kB) |
2019-03-14 00:00:00 2019-03-14 00:00:00 |
APP # 1 (2019-03-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Exhibit E Test Measurement Report per 2 1033 c14 | Test Report Adobe Acrobat PDF (2633 kB) |
2019-03-13 00:00:00 2019-03-13 00:00:00 |
| 1 | Misc RF Exposure Exhibits | RF Exposure Info Adobe Acrobat PDF (5057 kB) |
2019-03-13 00:00:00 2019-03-13 00:00:00 |
| 1 | Exhibit D Users Manual per 2 1033 c3 | Users Manual Adobe Acrobat PDF (2099 kB) |
2019-03-13 00:00:00 2019-03-13 00:00:00 |
| 1 | Exhibit C Internal Photographs per 2 1033 c12 | Internal Photos Adobe Acrobat PDF (2021 kB) |
2019-03-13 00:00:00 2019-03-13 00:00:00 |
| 1 | Exhibit C External Photographs per 2 1033 b7 | External Photos Adobe Acrobat PDF (1648 kB) |
2019-03-13 00:00:00 2019-03-13 00:00:00 |
| 1 | Exhibit A ID Label and location per 2 1033 c2 and c11 | ID Label/Location Info Adobe Acrobat PDF (497 kB) |
2019-03-13 00:00:00 2019-03-13 00:00:00 |
| 1 | Cover Letter Requesting Confidentiality | Cover Letter(s) Adobe Acrobat PDF (19 kB) |
2019-03-13 00:00:00 2019-03-13 00:00:00 |
| 1 | Cover Letter Stating Justification | Cover Letter(s) Adobe Acrobat PDF (69 kB) |
2019-03-13 00:00:00 2019-03-13 00:00:00 |
| 1 | Cover Letter for Extended Frequency Range | Cover Letter(s) Adobe Acrobat PDF (83 kB) |
2019-03-13 00:00:00 2019-03-13 00:00:00 |
| 1 | Misc Parts List Exhibits | Parts List/Tune Up Info Adobe Acrobat PDF (66 kB) |
2019-03-13 00:00:00 N/A |
APP # 2 (2019-03-14)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Exhibit B Operational Description per 2 1033 b4 | Operational Description Adobe Acrobat PDF (573 kB) |
2019-03-14 00:00:00 N/A |
APP # 1 (2019-03-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Misc Tune Up Procedure Exhibits | Parts List/Tune Up Info Adobe Acrobat PDF (425 kB) |
2019-03-13 00:00:00 N/A |
| 1 | Exhibit B Schematics per 2 1033 c10 | Schematics Adobe Acrobat PDF (570 kB) |
2019-03-13 00:00:00 N/A |
APP # 2 (2019-03-14)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Exhibit B Block Diagram per 2 1033 b5 | Block Diagram Adobe Acrobat PDF (573 kB) |
2019-03-14 00:00:00 N/A |
APP # 1 (2019-03-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Exhibit B Operational Description per 2 1033 c 4 5 6 7 8 9 13 | Operational Description Adobe Acrobat PDF (573 kB) |
2019-03-13 00:00:00 N/A |
APP # 2 (2019-03-14)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Exhibit B Schematics per 2 1033 b5 | Schematics Adobe Acrobat PDF (570 kB) |
2019-03-14 00:00:00 N/A |
Application Forms
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Applications are submitted for FCC ID and Grant requests. Click an above application to view details
Grants
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 03/13/2019 |
| Tait International Limited |
| 245 Wooldridge Road |
| HarewoodP.O. Box 1645, |
| Christchurch, 8051 New Zealand |
| Attention: Brian Emmett , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTPDK5C |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Portable Transceiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 11K0F3E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 16K0F3E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 6K60F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 9K60F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 10K8F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K80F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K60FXW |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K60FXD |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1W |
| Output power listed is conducted. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing. This transmitter may operate with the antennas tested for this filing in push-to-talk held-near-face and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational / Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting occupational exposure requirements, and users must be provided with the training information. The highest reported SAR values for head, body-worn accessory, are 2.6 W/kg, 7.46 W/kg, respectively. |
| BH: | The output power is continuously variable from the value listed in this entry to 30%-35% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Tait International Limited 245 Wooldridge Road HarewoodP.O. Box 1645, Christchurch, 8051 New Zealand |
Date of Grant: 03/13/2019 |
| Attention: Brian Emmett , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTPDK5C |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Portable Transceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 11K0F3E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 16K0F3E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 6K60F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 9K60F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 10K8F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K80F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K60FXW |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K60FXD |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1W |
| Output power listed is conducted. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing. This transmitter may operate with the antennas tested for this filing in push-to-talk held-near-face and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational / Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting occupational exposure requirements, and users must be provided with the training information. The highest reported SAR values for head, body-worn accessory, are 2.6 W/kg, 7.46 W/kg, respectively. |
| BH: | The output power is continuously variable from the value listed in this entry to 30%-35% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| Mail To: |
EA360219 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 02/11/2025 |
| Tait International Limited |
| 245 Wooldridge Road |
| HarewoodP.O. Box 1645, |
| Christchurch, 8051 New Zealand |
| Attention: Linda White , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTPDK5C |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Portable Transceiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 11K0F3E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 16K0F3E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 6K60F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 9K60F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K80F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 10K8F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K60FXW |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K60FXD |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1W |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F7E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F7D |
| BH EF | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 11K0F3E |
| BH EF | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 16K0F3E |
| BH EF | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 6K60F2D |
| BH EF | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 7K80F2D |
| BH EF | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 10K8F2D |
| BH EF | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 7K60FXW |
| BH EF | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 7K60FXD |
| BH EF | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 9K60F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 14K0F3E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K40F2D |
| Output power listed is conducted. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing. This transmitter may operate with the antennas tested for this filing in push-to-talk held-near-face and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational / Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting occupational exposure requirements, and users must be provided with the training information. The highest reported SAR values for head, body-worn accessory, are 2.6 W/kg, 7.46 W/kg, respectively. Class II permissive change to add 20kHz channel. |
| BH: | The output power is continuously variable from the value listed in this entry to 30%-35% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Tait International Limited 245 Wooldridge Road HarewoodP.O. Box 1645, Christchurch, 8051 New Zealand |
Date of Grant: 02/11/2025 |
| Attention: Linda White , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTPDK5C |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Portable Transceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 11K0F3E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 16K0F3E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 6K60F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 9K60F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K80F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 10K8F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K60FXW |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K60FXD |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1W |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F7E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F7D |
| BH EF | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 11K0F3E |
| BH EF | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 16K0F3E |
| BH EF | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 6K60F2D |
| BH EF | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 7K80F2D |
| BH EF | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 10K8F2D |
| BH EF | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 7K60FXW |
| BH EF | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 7K60FXD |
| BH EF | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 9K60F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 14K0F3E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K40F2D |
| Output power listed is conducted. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing. This transmitter may operate with the antennas tested for this filing in push-to-talk held-near-face and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational / Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting occupational exposure requirements, and users must be provided with the training information. The highest reported SAR values for head, body-worn accessory, are 2.6 W/kg, 7.46 W/kg, respectively. Class II permissive change to add 20kHz channel. |
| BH: | The output power is continuously variable from the value listed in this entry to 30%-35% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| Mail To: |
EA893322 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 03/19/2021 |
| Tait International Limited |
| 245 Wooldridge Road |
| HarewoodP.O. Box 1645, |
| Christchurch, 8051 New Zealand |
| Attention: Brian Emmett , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTPDK5C |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Portable Transceiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 11K0F3E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 16K0F3E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 6K60F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 9K60F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 10K8F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K80F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K60FXW |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K60FXD |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1W |
| Output power listed is conducted. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing. This transmitter may operate with the antennas tested for this filing in push-to-talk held-near-face and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational / Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting occupational exposure requirements, and users must be provided with the training information. The highest reported SAR values for head, body-worn accessory, are 2.6 W/kg, 7.46 W/kg, respectively. Class II permissive change as detailed in the filing. |
| BH: | The output power is continuously variable from the value listed in this entry to 30%-35% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Tait International Limited 245 Wooldridge Road HarewoodP.O. Box 1645, Christchurch, 8051 New Zealand |
Date of Grant: 03/19/2021 |
| Attention: Brian Emmett , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTPDK5C |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Portable Transceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 11K0F3E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 16K0F3E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 6K60F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 9K60F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 10K8F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K80F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K60FXW |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K60FXD |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1W |
| Output power listed is conducted. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing. This transmitter may operate with the antennas tested for this filing in push-to-talk held-near-face and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational / Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting occupational exposure requirements, and users must be provided with the training information. The highest reported SAR values for head, body-worn accessory, are 2.6 W/kg, 7.46 W/kg, respectively. Class II permissive change as detailed in the filing. |
| BH: | The output power is continuously variable from the value listed in this entry to 30%-35% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| Mail To: |
EA216103 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 08/01/2019 |
| Tait International Limited |
| 245 Wooldridge Road |
| HarewoodP.O. Box 1645, |
| Christchurch, 8051 New Zealand |
| Attention: Brian Emmett , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTPDK5C |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Portable Transceiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 11K0F3E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 16K0F3E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 6K60F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 9K60F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K80F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 10K8F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K60FXW |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K60FXD |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1W |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F7E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F7D |
| BH | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 11K0F3E |
| BH | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 16K0F3E |
| BH | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 6K60F2D |
| BH | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 7K80F2D |
| BH | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 10K8F2D |
| BH | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 7K60FXW |
| BH | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 7K60FXD |
| BH | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 9K60F2D |
| Output power listed is conducted. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing. This transmitter may operate with the antennas tested for this filing in push-to-talk held-near-face and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational / Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting occupational exposure requirements, and users must be provided with the training information. The highest reported SAR values for head, body-worn accessory, are 2.6 W/kg, 7.46 W/kg, respectively. C2PC to add Part 27. |
| BH: | The output power is continuously variable from the value listed in this entry to 30%-35% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Tait International Limited 245 Wooldridge Road HarewoodP.O. Box 1645, Christchurch, 8051 New Zealand |
Date of Grant: 08/01/2019 |
| Attention: Brian Emmett , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTPDK5C |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Portable Transceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 11K0F3E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 16K0F3E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 6K60F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 9K60F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K80F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 10K8F2D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K60FXW |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 7K60FXD |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1D |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F1W |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F7E |
| BH EF | 22, 90 | 762.0 - 870.0 | 3.0 | 0.5 PM | 8K10F7D |
| BH | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 11K0F3E |
| BH | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 16K0F3E |
| BH | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 6K60F2D |
| BH | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 7K80F2D |
| BH | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 10K8F2D |
| BH | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 7K60FXW |
| BH | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 7K60FXD |
| BH | 27 | 787.0 - 788.0 | 3.0 | 0.5 PM | 9K60F2D |
| Output power listed is conducted. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing. This transmitter may operate with the antennas tested for this filing in push-to-talk held-near-face and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational / Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting occupational exposure requirements, and users must be provided with the training information. The highest reported SAR values for head, body-worn accessory, are 2.6 W/kg, 7.46 W/kg, respectively. C2PC to add Part 27. |
| BH: | The output power is continuously variable from the value listed in this entry to 30%-35% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| Mail To: |
EA804825 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 02/11/2025 |
| Tait International Limited |
| 245 Wooldridge Road |
| HarewoodP.O. Box 1645, |
| Christchurch, 8051 New Zealand |
| Attention: Linda White , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTPDK5C |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Portable Transceiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.016 |
| Output power listed is conducted. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Class II permissive change as detailed in this filing. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Tait International Limited 245 Wooldridge Road HarewoodP.O. Box 1645, Christchurch, 8051 New Zealand |
Date of Grant: 02/11/2025 |
| Attention: Linda White , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTPDK5C |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Portable Transceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.016 |
| Output power listed is conducted. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Class II permissive change as detailed in this filing. |
| Mail To: |
EA916829 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 03/19/2021 |
| Tait International Limited |
| 245 Wooldridge Road |
| HarewoodP.O. Box 1645, |
| Christchurch, 8051 New Zealand |
| Attention: Brian Emmett , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTPDK5C |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Portable Transceiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.016 |
| Output power listed is conducted. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Class II permissive change as detailed in this filing. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Tait International Limited 245 Wooldridge Road HarewoodP.O. Box 1645, Christchurch, 8051 New Zealand |
Date of Grant: 03/19/2021 |
| Attention: Brian Emmett , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTPDK5C |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Portable Transceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.016 |
| Output power listed is conducted. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Class II permissive change as detailed in this filing. |
| Mail To: |
EA456236 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 03/14/2019 |
| Tait International Limited |
| 245 Wooldridge Road |
| HarewoodP.O. Box 1645, |
| Christchurch, 8051 New Zealand |
| Attention: Brian Emmett , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTPDK5C |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Portable Transceiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.016 |
| Output power listed is conducted. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Tait International Limited 245 Wooldridge Road HarewoodP.O. Box 1645, Christchurch, 8051 New Zealand |
Date of Grant: 03/14/2019 |
| Attention: Brian Emmett , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTPDK5C |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Portable Transceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.016 |
| Output power listed is conducted. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |
EA186188 |