FCC ID CASTPGHKB

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515

Date of Grant: 01/22/2025 Application Dated: 01/21/2025

Tait International Limited

245 Wooldridge Road

HarewoodP.O. Box 1645,

Christchurch, 8051 New Zealand

Attention: Linda White , Standards and Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CASTPGHKB
Name of Grantee:	Tait International Limited
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	Portable Transceiver

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BF EF ES	22, 90	406.1  -  470.0	4.0	0.5  PM	11K0F3E
BF EF ES	22, 90	406.1  -  470.0	4.0	0.5  PM	6K60F2D
BF EF ES	22, 90	406.1  -  470.0	4.0	0.5  PM	7K80F2D
BF EF ES	22, 90	406.1  -  470.0	4.0	0.5  PM	8K00FXW
BF EF ES	22, 90	406.1  -  470.0	4.0	0.5  PM	8K00FXD
BF EF ES	22, 90	406.1  -  470.0	4.0	0.5  PM	8K10F1E
BF EF ES	22, 90	406.1  -  470.0	4.0	0.5  PM	8K10F1D
BF EF ES	22, 90	406.1  -  470.0	4.0	0.5  PM	8K10F1W

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Body-worn operating configuration is limited to the specific belt-clip supplied or similar accessory for use with this product. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head and body-worn accessory are 2.57 W/kg, and 2.94 W/kg, respectively.

BF:	The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed.
EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES:	This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Tait International Limited 245 Wooldridge Road HarewoodP.O. Box 1645, Christchurch, 8051 New Zealand

Date of Grant: 01/22/2025 Application Dated: 01/21/2025

Attention: Linda White , Standards and Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CASTPGHKB
Name of Grantee:	Tait International Limited
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	Portable Transceiver
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BF EF ES	22, 90	406.1  -  470.0	4.0	0.5  PM	11K0F3E
BF EF ES	22, 90	406.1  -  470.0	4.0	0.5  PM	6K60F2D
BF EF ES	22, 90	406.1  -  470.0	4.0	0.5  PM	7K80F2D
BF EF ES	22, 90	406.1  -  470.0	4.0	0.5  PM	8K00FXW
BF EF ES	22, 90	406.1  -  470.0	4.0	0.5  PM	8K00FXD
BF EF ES	22, 90	406.1  -  470.0	4.0	0.5  PM	8K10F1E
BF EF ES	22, 90	406.1  -  470.0	4.0	0.5  PM	8K10F1D
BF EF ES	22, 90	406.1  -  470.0	4.0	0.5  PM	8K10F1W

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Body-worn operating configuration is limited to the specific belt-clip supplied or similar accessory for use with this product. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head and body-worn accessory are 2.57 W/kg, and 2.94 W/kg, respectively.

BF:	The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed.
EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES:	This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

TCB Grant - Application E/vtZ1z7ZbMwg38XD4tZjw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515

Date of Grant: 01/22/2025 Application Dated: 01/22/2025

Tait International Limited

245 Wooldridge Road

HarewoodP.O. Box 1645,

Christchurch, 8051 New Zealand

Attention: Linda White , Standards and Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CASTPGHKB
Name of Grantee:	Tait International Limited
Equipment Class:	Digital Transmission System
Notes:	Portable Transceiver

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0  -  2480.0	0.011
	15C	2412.0  -  2462.0	0.191
	15C	2422.0  -  2452.0	0.195

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Body-worn operating configuration is limited to the specific belt-clip supplied or similar accessory for use with this product. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head and body-worn accessory are 2.57 W/kg, and 2.94 W/kg, respectively.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Tait International Limited 245 Wooldridge Road HarewoodP.O. Box 1645, Christchurch, 8051 New Zealand

Date of Grant: 01/22/2025 Application Dated: 01/22/2025

Attention: Linda White , Standards and Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CASTPGHKB
Name of Grantee:	Tait International Limited
Equipment Class:	Digital Transmission System
Notes:	Portable Transceiver
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0  -  2480.0	0.011
	15C	2412.0  -  2462.0	0.191
	15C	2422.0  -  2452.0	0.195

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Body-worn operating configuration is limited to the specific belt-clip supplied or similar accessory for use with this product. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head and body-worn accessory are 2.57 W/kg, and 2.94 W/kg, respectively.

Mail To: