FCC ID CFS8DLLYNXTOUCH2

Wireless Control / Communicator

by Ademco Inc.

Grantee Code: CFS   Product Code: 8DLLYNXTOUCH2
Latest application date: 2012-02-10

FCC ID Device Details

FCC IDCFS8DLLYNXTOUCH2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeCFS
Product Code8DLLYNXTOUCH2
Applicant BusinessAdemco Inc. 🇺🇸
Related Domains honeywell.com
Equipment ClassWireless Control / Communicator
Test FirmHoneywell International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
344.94 MHzClass II permissive change or modification of presently authorized equipment2012-02-10
344.94 MHzClass II permissive change or modification of presently authorized equipment2011-12-30
344.94 MHzClass II permissive change or modification of presently authorized equipment2011-12-29
344.94 MHzChange in identification of presently authorized equipment. Original FCC ID: CFS8DLLYNXTOUCH1 Grant Date: 11/08/20112011-11-11

Exhibits

DocumentTypeAvailableFile
Internal PhotosInternal Photos2012-06-26PDF 301 KB
Internal PhotosInternal Photos2012-06-26PDF 595 KB
Internal Photos 1Internal Photos2012-02-10PDF 281.2 KB
Internal Photos 2Internal Photos2012-02-10PDF 290.3 KB
External PhotosExternal Photos2011-11-11PDF 349.3 KB
Labeling Info 1ID Label/Location Info2012-02-10PDF 980.7 KB
Labeling Info 2ID Label/Location Info2012-02-10PDF 281.2 KB
Labeling Info 3ID Label/Location Info2012-02-10PDF 578.9 KB
Label Info Showing Added ModulesID Label/Location Info2011-12-30PDF 780.2 KB
Label of 3 G ModuleID Label/Location Info2011-12-30PDF 161.3 KB
Label Info Showing Added ModuleID Label/Location Info2011-12-29PDF 140.1 KB
Label InfoID Label/Location Info2011-11-11PDF 142.9 KB
AC Power Line EmissionsTest Report2011-12-29PDF 386.1 KB
Class B EmissionsTest Report2011-12-29PDF 76 KB
Test Report InfoTest Report2011-12-29PDF 200.3 KB
Cover LetterCover Letter(s)2012-02-10PDF 30.7 KB
FCC PC Cover LetterCover Letter(s)2011-12-30PDF 33.2 KB
Short Term Confidentiality Letter RevisedCover Letter(s)2011-12-30PDF 195.9 KB
PC Cover LetterCover Letter(s)2011-12-29PDF 30 KB
Short Term Confidentiality Letter RevisedCover Letter(s)2011-12-29PDF 192.7 KB
Change of ID LetterCover Letter(s)2011-11-11PDF 37.9 KB
MPE InfoRF Exposure Info2012-02-10PDF 13.2 KB
MPE Question and AnswerRF Exposure Info2012-02-10PDF 45.4 KB
Data to Support RF ExposureRF Exposure Info2011-12-30PDF 173.2 KB
RF Exposure InfoRF Exposure Info2011-12-30PDF 12.9 KB
RF Exposure Info Revison 12 21 11 BRF Exposure Info2011-12-29PDF 11.4 KB

Application Information

Application IDnWMQ9aViwRpmblpaAclzKg==
Final Action Date2012-02-10
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0004071130
Model8DLLYNXTOUCH2
Frequency Range344.94 MHz
Equipment ClassDSR - Part 15 Remote Control/Security Device Transceiver
Device DescriptionWireless Control / Communicator
Responsible PartyMark Schmidt, Manager, Engineering, mark.schmidt@honeywell.com , 516-577-5939
Technical ContactKenneth Eskildsen, Honeywell International Inc., kenneth.eskildsen@honeywell.com , 516 577 5878
Test FirmMark Schmidt, Honeywell International Inc., mark.schmidt@honeywell.com , 516-577-5939
TCB Emailhotline@acbcert.com
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThis device may contain a co-located 3G Module, WiFi Module, and/or ZWAVE Module transmitter as shown in applications under this FCC ID. When co-located with this transmitter, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
nWMQ9aViwRpmblpaAclzKg==2012-02-10Class II permissive change or modification of presently authorized equipment
oyKZCZsJm0MFt33epgP17Q==2011-12-30Class II permissive change or modification of presently authorized equipment
Z0gnwp5CVQqjCFIhqhc/pA==2011-12-29Class II permissive change or modification of presently authorized equipment
NZu97+qnABiQ9GaBu3AwcQ==2011-11-11Change in identification of presently authorized equipment. Original FCC ID: CFS8DLLYNXTOUCH1 Grant Date: 11/08/2011

Equipment Authorization

FrequencyRulesGrant Notes
344.94 MHz15.23168

Grants

TCB Grant - Application Z0gnwp5CVQqjCFIhqhc/pA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/29/2011

Application Dated: 12/29/2011
Honeywell International Inc.
2 Corporate Center Drive
Suite 100P.O. Box 9040,
Melville, NY 11747
 
Attention: Mark Schmidt , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CFS8DLLYNXTOUCH2
Name of Grantee:  Honeywell International Inc.
Equipment Class: Part 15 Remote Control/Security Device Transceiver
Notes: Wireless Control / Communicator
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 15.231 344.94  -  344.94  

This device may contain a co-located 3G Module transmitter as shown in applications under this FCC ID. When co-located with this transmitter, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

68: This grant does not pertain to equipment approval requirements under Part 68.

EAS Grant - Application Z0gnwp5CVQqjCFIhqhc/pA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International Inc.
2 Corporate Center Drive Suite 100P.O. Box 9040,
Melville, NY 11747
United States
  Date of Grant: 12/29/2011

Application Dated: 12/29/2011
 
Attention: Mark Schmidt , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CFS8DLLYNXTOUCH2
Name of Grantee:  Honeywell International Inc.
Equipment Class: Part 15 Remote Control/Security Device Transceiver
Notes: Wireless Control / Communicator
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 15.231 344.94  -  344.94  

This device may contain a co-located 3G Module transmitter as shown in applications under this FCC ID. When co-located with this transmitter, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


68: This grant does not pertain to equipment approval requirements under Part 68.

TCB Grant - Application oyKZCZsJm0MFt33epgP17Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/30/2011

Application Dated: 12/29/2011
Honeywell International Inc.
2 Corporate Center Drive
Suite 100P.O. Box 9040,
Melville, NY 11747
 
Attention: Mark Schmidt , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CFS8DLLYNXTOUCH2
Name of Grantee:  Honeywell International Inc.
Equipment Class: Part 15 Remote Control/Security Device Transceiver
Notes: Wireless Control / Communicator
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 15.231 344.94  -  344.94  

This device may contain a co-located 3G Module and/or WiFi Module transmitter as shown in applications under this FCC ID. When co-located with this transmitter, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

68: This grant does not pertain to equipment approval requirements under Part 68.

EAS Grant - Application oyKZCZsJm0MFt33epgP17Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International Inc.
2 Corporate Center Drive Suite 100P.O. Box 9040,
Melville, NY 11747
United States
  Date of Grant: 12/30/2011

Application Dated: 12/29/2011
 
Attention: Mark Schmidt , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CFS8DLLYNXTOUCH2
Name of Grantee:  Honeywell International Inc.
Equipment Class: Part 15 Remote Control/Security Device Transceiver
Notes: Wireless Control / Communicator
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 15.231 344.94  -  344.94  

This device may contain a co-located 3G Module and/or WiFi Module transmitter as shown in applications under this FCC ID. When co-located with this transmitter, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


68: This grant does not pertain to equipment approval requirements under Part 68.

TCB Grant - Application NZu97+qnABiQ9GaBu3AwcQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/11/2011

Application Dated: 11/10/2011
Honeywell International Inc.
2 Corporate Center Drive
Suite 100P.O. Box 9040,
Melville, NY 11747
 
Attention: Mark Schmidt , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CFS8DLLYNXTOUCH2
Name of Grantee:  Honeywell International Inc.
Equipment Class: Part 15 Remote Control/Security Device Transceiver
Notes: Wireless Control / Communicator
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 15.231 344.94  -  344.94  

This device may contain a co-located GSM/GPRS Module transmitter as shown in applications under this FCC ID. When co-located with this transmitter, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

68: This grant does not pertain to equipment approval requirements under Part 68.

EAS Grant - Application NZu97+qnABiQ9GaBu3AwcQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International Inc.
2 Corporate Center Drive Suite 100P.O. Box 9040,
Melville, NY 11747
United States
  Date of Grant: 11/11/2011

Application Dated: 11/10/2011
 
Attention: Mark Schmidt , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CFS8DLLYNXTOUCH2
Name of Grantee:  Honeywell International Inc.
Equipment Class: Part 15 Remote Control/Security Device Transceiver
Notes: Wireless Control / Communicator
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 15.231 344.94  -  344.94  

This device may contain a co-located GSM/GPRS Module transmitter as shown in applications under this FCC ID. When co-located with this transmitter, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


68: This grant does not pertain to equipment approval requirements under Part 68.

TCB Grant - Application nWMQ9aViwRpmblpaAclzKg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 02/10/2012

Application Dated: 02/10/2012
Honeywell International Inc.
2 Corporate Center Drive
Suite 100P.O. Box 9040,
Melville, NY 11747
 
Attention: Mark Schmidt , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CFS8DLLYNXTOUCH2
Name of Grantee:  Honeywell International Inc.
Equipment Class: Part 15 Remote Control/Security Device Transceiver
Notes: Wireless Control / Communicator
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 15.231 344.94  -  344.94  

This device may contain a co-located 3G Module, WiFi Module, and/or ZWAVE Module transmitter as shown in applications under this FCC ID. When co-located with this transmitter, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

68: This grant does not pertain to equipment approval requirements under Part 68.

EAS Grant - Application nWMQ9aViwRpmblpaAclzKg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International Inc.
2 Corporate Center Drive Suite 100P.O. Box 9040,
Melville, NY 11747
United States
  Date of Grant: 02/10/2012

Application Dated: 02/10/2012
 
Attention: Mark Schmidt , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CFS8DLLYNXTOUCH2
Name of Grantee:  Honeywell International Inc.
Equipment Class: Part 15 Remote Control/Security Device Transceiver
Notes: Wireless Control / Communicator
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 15.231 344.94  -  344.94  

This device may contain a co-located 3G Module, WiFi Module, and/or ZWAVE Module transmitter as shown in applications under this FCC ID. When co-located with this transmitter, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


68: This grant does not pertain to equipment approval requirements under Part 68.

Mail To: