FCC ID CFS8DLWFZWX
Radio Module
by Ademco Inc.
Grantee Code: CFS Product Code: 8DLWFZWX
Latest application date: 2021-10-22
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2021-10-22 |
| 908.4-916 MHz | Original Equipment | 2021-10-22 |
Exhibits
Application Information
| Application ID | o+wtps/+GJ0MWtwbQ7xjVQ== |
|---|---|
| Final Action Date | 2021-10-22 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0004071130 |
| Model | 8DLWFZWX |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Radio Module |
| Responsible Party | Christian Fouth, Sr. Wireless Certification Engineer, Christian.Fouth@resideo.com |
| Technical Contact | Haley Ackun, UL LLC, haley.ackun@ul.com |
| Test Firm | Steven Thompson, UL LLC, steven.d.thompson@ul.com |
| TCB Email | LST.FRE.CertNotice@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 04/04/2022 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited modular approval - installation is limited to compatible ADT Control Panels and similar systems. Output power listed is conducted. This device supports WLAN bandwidths 20 MHz as described in this filing. The transmitter supports 2x2 MIMO. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| o+wtps/+GJ0MWtwbQ7xjVQ== | 2021-10-22 | Original Equipment |
| 6fzrSnBIK9FJMrlLoWaB6A== | 2021-10-22 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application o+wtps/+GJ0MWtwbQ7xjVQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/22/2021 Application Dated: 10/21/2021 |
| Ademco Inc. |
| 2 Corporate Center Drive |
| Suite 100 |
| Melville, NY 11747 |
| Attention: Christian Fouth , Sr. Wireless Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CFS8DLWFZWX |
| Name of Grantee: | Ademco Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.214 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.886 |
| Limited modular approval - installation is limited to compatible ADT Control Panels and similar systems. Output power listed is conducted. This device supports WLAN bandwidths 20 MHz as described in this filing. The transmitter supports 2x2 MIMO. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application o+wtps/+GJ0MWtwbQ7xjVQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ademco Inc. 2 Corporate Center Drive Suite 100 Melville, NY 11747 United States |
Date of Grant: 10/22/2021 Application Dated: 10/21/2021 |
| Attention: Christian Fouth , Sr. Wireless Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CFS8DLWFZWX |
| Name of Grantee: | Ademco Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.214 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.886 |
| Limited modular approval - installation is limited to compatible ADT Control Panels and similar systems. Output power listed is conducted. This device supports WLAN bandwidths 20 MHz as described in this filing. The transmitter supports 2x2 MIMO. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/22/2021 Application Dated: 10/21/2021 |
| Ademco Inc. |
| 2 Corporate Center Drive |
| Suite 100 |
| Melville, NY 11747 |
| Attention: Christian Fouth , Sr. Wireless Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CFS8DLWFZWX |
| Name of Grantee: | Ademco Inc. |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 908.4 - 916.0 |
| Limited modular approval - installation is limited to compatible ADT Control Panels and similar systems. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 6fzrSnBIK9FJMrlLoWaB6A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ademco Inc. 2 Corporate Center Drive Suite 100 Melville, NY 11747 United States |
Date of Grant: 10/22/2021 Application Dated: 10/21/2021 |
| Attention: Christian Fouth , Sr. Wireless Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CFS8DLWFZWX |
| Name of Grantee: | Ademco Inc. |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 908.4 - 916.0 |
| Limited modular approval - installation is limited to compatible ADT Control Panels and similar systems. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |