FCC ID CICDTX-A613-SF

SHARPEYE RADAR TRANSCEIVER

by Kelvin Hughes Limited

Grantee Code: CIC   Product Code: DTXA613SF
Latest application date: 2020-08-26

FCC ID Device Details

FCC IDCICDTX-A613-SF
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeCIC
Product CodeDTXA613SF
Applicant BusinessKelvin Hughes Limited 🇬🇧
Related Domains kelvinhughes.co.uk
Equipment ClassSHARPEYE RADAR TRANSCEIVER
Test FirmTimco Engineering, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
9300-9500 MHzOriginal Equipment2020-08-26
9000-9200 MHzOriginal Equipment2020-08-26

Exhibits

DocumentTypeAvailableFile
User Manual Op planned maintUsers Manual2020-08-26PDF 3.4 MB
External PhotosExternal Photos2020-08-26PDF 565.3 KB
Label InfoID Label/Location Info2020-08-26PDF 144 KB
TsupTest Setup Photos2020-08-26PDF 1 MB
MPE Test ReportRF Exposure Info2020-08-26PDF 578.8 KB
Test ReportTest Report2020-08-26PDF 4.7 MB
Test Report Part 80Test Report2020-08-26PDF 4.9 MB
Test Report Part 87Test Report2020-08-26PDF 5.7 MB
Test Report Part 90Test Report2020-08-26PDF 4.9 MB
TestRpt pt 87Test Report2020-08-26PDF 5.4 MB
TestRpt pt 90Test Report2020-08-26PDF 4.9 MB
Attestation Letter tuningAttestation Statements2020-08-26PDF 296.9 KB
Confidentiality LetterCover Letter(s)2020-08-26PDF 3.5 MB
POA LetterCover Letter(s)2020-08-26PDF 335.4 KB
MPE ReportRF Exposure Info2020-08-26PDF 578.1 KB
Tuning ProcedureParts List/Tune Up Info2020-08-26PDF 16.4 KB
Internal Photos Metadata onlyInternal PhotosPDF 3.6 MB
Block Diagram Metadata onlyBlock DiagramPDF 428.7 KB
Schematics Metadata onlySchematicsPDF 3.1 MB
Op Desc Antenna Metadata onlyOperational DescriptionPDF 437.3 KB
Op Desc Circuit Description Metadata onlyOperational DescriptionPDF 207 KB
Parts List BOM Metadata onlyParts List/Tune Up InfoPDF 445.5 KB
Parts List Host Metadata onlyParts List/Tune Up InfoPDF 445.5 KB

Application Information

Application IDe96yej859jym0Zkg4eoJyw==
Final Action Date2020-08-26
Application PurposeOriginal Equipment
Applicant FRN0019158021
ModelDTX-A613-SF
Frequency Range9300-9500 MHz
Equipment ClassMRD - Marine Radar
Device DescriptionSHARPEYE RADAR TRANSCEIVER
Responsible PartyTim Acland, Chief Engineer, tim.acland@kelvinhughes.co.uk , 441992805200
Test FirmBruno Clavier, Timco Engineering, Inc., bruno@timcoengr.com , 352-472-5500
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB3: Maritime & Aviation Radio Services equipment in 47 CFR parts 80 & 87
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. This device has been designed to operate with an antenna having a maximum gain of 34.5dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 2.78m from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
e96yej859jym0Zkg4eoJyw==2020-08-26Original Equipment
/90Ubhqk1p9jQ8hQSvcj+Q==2020-08-26Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
9000-9200 MHz34.816.92ppm62M5P0N87
9000-9500 MHz34.816.92ppm62M5P0N9
9300-9500 MHz34.800000016.9200000000ppm62M5P0N80
9300-9500 MHz34.816.92ppm62M5P0N87

Grants

TCB Grant - Application e96yej859jym0Zkg4eoJyw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 08/26/2020

Application Dated: 08/26/2020
Kelvin Hughes Limited
Voltage
Mollison Avenue
Enfield, EN3 7XQ
United Kingdom
 
Attention: Tim Acland , Chief Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CICDTX-A613-SF
Name of Grantee:  Kelvin Hughes Limited
Equipment Class: Marine Radar
Notes: SHARPEYE RADAR TRANSCEIVER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
80 9300.0  -  9500.0 34.8 16.92  PM 62M5P0N

Power listed is conducted. This device has been designed to operate with an antenna having a maximum gain of 34.5dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 2.78m from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application e96yej859jym0Zkg4eoJyw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Kelvin Hughes Limited
Voltage Mollison Avenue
Enfield, EN3 7XQ
United Kingdom
  Date of Grant: 08/26/2020

Application Dated: 08/26/2020
 
Attention: Tim Acland , Chief Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CICDTX-A613-SF
Name of Grantee:  Kelvin Hughes Limited
Equipment Class: Marine Radar
Notes: SHARPEYE RADAR TRANSCEIVER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
80 9300.0  -  9500.0 34.8 16.92  PM 62M5P0N

Power listed is conducted. This device has been designed to operate with an antenna having a maximum gain of 34.5dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 2.78m from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application /90Ubhqk1p9jQ8hQSvcj+Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 08/26/2020

Application Dated: 08/26/2020
Kelvin Hughes Limited
Voltage
Mollison Avenue
Enfield, EN3 7XQ
United Kingdom
 
Attention: Tim Acland , Chief Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CICDTX-A613-SF
Name of Grantee:  Kelvin Hughes Limited
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: SHARPEYE RADAR TRANSCEIVER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
87 9000.0  -  9200.0 34.8 16.92  PM 62M5P0N
87 9300.0  -  9500.0 34.8 16.92  PM 62M5P0N
90 9000.0  -  9500.0 34.8 16.92  PM 62M5P0N

Power listed is conducted. This device has been designed to operate with an antenna having a maximum gain of 34.5dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 2.78m from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application /90Ubhqk1p9jQ8hQSvcj+Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Kelvin Hughes Limited
Voltage Mollison Avenue
Enfield, EN3 7XQ
United Kingdom
  Date of Grant: 08/26/2020

Application Dated: 08/26/2020
 
Attention: Tim Acland , Chief Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CICDTX-A613-SF
Name of Grantee:  Kelvin Hughes Limited
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: SHARPEYE RADAR TRANSCEIVER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
87 9000.0  -  9200.0 34.8 16.92  PM 62M5P0N
87 9300.0  -  9500.0 34.8 16.92  PM 62M5P0N
90 9000.0  -  9500.0 34.8 16.92  PM 62M5P0N

Power listed is conducted. This device has been designed to operate with an antenna having a maximum gain of 34.5dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 2.78m from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: