FCC ID CJ6UPA3234WL

802.11a/b MINIPCI TYPE 3B CARD

by Dynabook Inc.

Grantee Code: CJ6   Product Code: UPA3234WL
Latest application date: 2003-11-13

FCC ID Device Details

FCC IDCJ6UPA3234WL
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeCJ6
Product CodeUPA3234WL
Applicant BusinessDynabook Inc. 🇯🇵
Related Domains dynabook.com
Equipment Class802.11a/b MINIPCI TYPE 3B CARD
Test FirmCompliance Certification Services Inc

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2003-11-13
5150-5250 MHzClass II permissive change or modification of presently authorized equipment2003-11-13
5150-5250 MHzOriginal Equipment2003-07-18
2412-2462 MHzOriginal Equipment2003-07-18

Exhibits

DocumentTypeAvailableFile
Firebolt PA3234 ManualUsers Manual2003-11-13PDF 39.1 KB
Firebolt PA3234 manualUsers Manual2003-11-13PDF 39.1 KB
PotegeM200 User ManualUsers Manual2003-11-13PDF 2 MB
Installatin instructionUsers Manual2003-07-18PDF 2 MB
OEM installation instructionUsers Manual2003-07-18PDF 2 MB
WLAN manualUsers Manual2003-07-18PDF 50.9 KB
WLAN user manualUsers Manual2003-07-18PDF 50.9 KB
Internal PhotosInternal Photos2003-07-18PDF 1.2 MB
WLAN and Bluetooth antenna locationInternal Photos2003-07-18PDF 33.2 KB
External PhotosExternal Photos2003-11-13PDF 106.2 KB
External PhotosExternal Photos2003-07-18PDF 517 KB
FCC ID LabelID Label/Location Info2003-11-13PDF 129.7 KB
FCC ID label format and locationID Label/Location Info2003-07-18PDF 63.2 KB
Setup PhotosTest Setup Photos2003-11-13PDF 466.6 KB
UNII Setup PhotosTest Setup Photos2003-11-13PDF 466.4 KB
Test Setup PhotosTest Setup Photos2003-07-18PDF 329.3 KB
Test setup PhotosTest Setup Photos2003-07-18PDF 329.3 KB
Test ReportTest Report2003-11-13PDF 2 MB
UNII Test ReportTest Report2003-11-13PDF 2.4 MB
RF conducted portion of test reportTest Report2003-07-18PDF 744.4 KB
Radiated portion of test reportTest Report2003-07-18PDF 3.4 MB
Radiated spurious emission portion of test reportTest Report2003-07-18PDF 3.5 MB
WLAN RF conducted portion of test reportTest Report2003-07-18PDF 214.8 KB
CCS reply to FCCCover Letter(s)2003-11-13PDF 8.6 KB
Class II Change LetterCover Letter(s)2003-11-13PDF 2 MB
Class II Change LetterCover Letter(s)2003-11-13PDF 1 MB
Limited Modular Approval LetterCover Letter(s)2003-11-13PDF 7 KB
reply to FCCCover Letter(s)2003-11-13PDF 8 KB
request for adding grant deferred dateCover Letter(s)2003-11-13PDF 45.4 KB
Request for confidentiality letterCover Letter(s)2003-07-18PDF 674.5 KB
Request for limited module approvalCover Letter(s)2003-07-18PDF 9.5 KB
5G SAR ReportRF Exposure Info2003-11-13PDF 803 KB
Antenna Information 1Parts List/Tune Up Info2003-11-13PDF 81.3 KB
Antenna Information 1Parts List/Tune Up Info2003-11-13PDF 45.3 KB
Antenna Information 2Parts List/Tune Up Info2003-11-13PDF 43.9 KB
Antenna Information 2Parts List/Tune Up Info2003-11-13PDF 71.3 KB
Antenna Photos and LocationRF Exposure Info2003-11-13PDF 93.2 KB
Antenna Specification BTParts List/Tune Up Info2003-11-13PDF 86.8 KB
SAR ReportRF Exposure Info2003-11-13PDF 795.3 KB
SAR attachment 1RF Exposure Info2003-11-13PDF 159.2 KB
SAR attachment 1RF Exposure Info2003-11-13PDF 219.1 KB
SAR attachment 2RF Exposure Info2003-11-13PDF 1.2 MB
SAR attachment 2RF Exposure Info2003-11-13PDF 1 MB
SAR attachment 3RF Exposure Info2003-11-13PDF 1.1 MB
SAR attachment 3RF Exposure Info2003-11-13PDF 844.5 KB
SAR attachment 4RF Exposure Info2003-11-13PDF 695.6 KB
SAR attachment 4RF Exposure Info2003-11-13PDF 2.7 MB
Toshiba Reply to four screen orientationRF Exposure Info2003-11-13PDF 48.8 KB
revised SAR reportRF Exposure Info2003-11-13PDF 824.5 KB
HTL008 antenna specificationParts List/Tune Up Info2003-07-18PDF 20.3 KB
HTL012 antenna specificationParts List/Tune Up Info2003-07-18PDF 19.7 KB
MPE EstimateRF Exposure Info2003-07-18PDF 15.6 KB
TIAN01 Antenna specificationParts List/Tune Up Info2003-07-18PDF 18.3 KB
TIAN01 antenna specificationParts List/Tune Up Info2003-07-18PDF 18.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 60.5 KB
Schematic diagram Metadata onlySchematicsPDF 1.4 MB
Theory of operation Metadata onlyOperational DescriptionPDF 221.3 KB

Application Information

Application IDfa0AhtlJbuap/4KTbMVmKw==
Final Action Date2003-11-13
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0003743994
ModelUPA3234WL
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11a/b MINIPCI TYPE 3B CARD
Responsible PartyToru Kawasaki, Senior Manager, toru.kawasaki@dynabook.com , 81-50-5357-9235
AgentSTEVE STEVE STEVE, COMPLIANCE CERTIFICATION SERVICES, SCHENG@CCSEMC.COM , 408-463-0885
Technical ContactSTEVE CHENG, COMPLIANCE CERTIFICATION SERVICES, SCHENG@CCSEMC.COM , 408-463-0885
Test FirmSteve Cheng, Compliance Certification Services Inc, scheng@ccemc.com , 408-463-0885
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralYes
Grant Deferral Date10/31/2003
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Modular Approval. Output power listed is conducted. This device must be marketed for indoor use only. Co-located transmitter operating conditions with FCC ID:CJ6UPA3232BT has been evaluated as described in this filing. For use in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filings under this FCC ID, and must be installed in the manner specified therein. The grantee has to ensure the installation procedures comply with 15.407(d) integral antenna requirement which prevents end user to access the transmitter module after the installation. This device must be installed in Toshiba laptop computers only by Toshiba or by Toshiba OEM dealers. User installation is prohibited. Use in portable exposure conditions is limited to the specific laptop computer configurations evaluated in this filing. The highest reported SAR values are: body - 2.4 GHz, 0.39 W/kg.

Applications

Application IDDatePurpose
fa0AhtlJbuap/4KTbMVmKw==2003-11-13Class II permissive change or modification of presently authorized equipment
GUR2JFYFuBUyW3HlfA6cVQ==2003-11-13Class II permissive change or modification of presently authorized equipment
RZuBVtXZYpm7yZjjdlUJVQ==2003-07-18Original Equipment
9FqIxf6/+U1vUzq9dixANA==2003-07-18Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.045000015CCE
5150-5250 MHz0.04515ECE
5250-5350 MHz0.05415ECE

Grants

TCB Grant - Application RZuBVtXZYpm7yZjjdlUJVQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 07/18/2003

Application Dated: 07/18/2003
Dynabook Inc.
6-15 Toyosu 5-chome, Koto-ku
Tokyo 135-8505,
Japan
 
Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CJ6UPA3234WL
Name of Grantee:  Dynabook Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b Mini-PCI WLAN Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15E 5150.0  -  5250.0 0.045  
CE 15E 5250.0  -  5350.0 0.054  

Limited module approval. Output power listed is conducted. This device must be marketed for indoor user only. This device may only be used in Toshiba laptops computer. Co-located transmitter operating conditions with FCC ID:CJ6UPA3232BT have been evaluated as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The grantee has to ensure the installation procedures comply with 15.407(d) integral antenna requirement which prevent the end user to access the transmitter module after the installation. This device must be installed by Toshiba or by Toshiba OEM dealers. This grant is valid only when the end user has no manual instructions to remove or install the device.

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application RZuBVtXZYpm7yZjjdlUJVQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dynabook Inc.
6-15 Toyosu 5-chome, Koto-ku
Tokyo 135-8505,
Japan
  Date of Grant: 07/18/2003

Application Dated: 07/18/2003
 
Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CJ6UPA3234WL
Name of Grantee:  Dynabook Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b Mini-PCI WLAN Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15E 5150.0  -  5250.0 0.045  
CE 15E 5250.0  -  5350.0 0.054  

Limited module approval. Output power listed is conducted. This device must be marketed for indoor user only. This device may only be used in Toshiba laptops computer. Co-located transmitter operating conditions with FCC ID:CJ6UPA3232BT have been evaluated as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The grantee has to ensure the installation procedures comply with 15.407(d) integral antenna requirement which prevent the end user to access the transmitter module after the installation. This device must be installed by Toshiba or by Toshiba OEM dealers. This grant is valid only when the end user has no manual instructions to remove or install the device.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application GUR2JFYFuBUyW3HlfA6cVQ==

This application does not exist.

EAS Grant - Application GUR2JFYFuBUyW3HlfA6cVQ==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dynabook Inc.
6-15 Toyosu 5-chome, Koto-ku
Tokyo 135-8505,
Japan
  Date of Grant: 11/13/2003

Application Dated: 10/14/2003
 
Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CJ6UPA3234WL
Name of Grantee:  Dynabook Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b MINIPCI TYPE 3B CARD
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15E 5150.0  -  5250.0 0.045  
CE 15E 5250.0  -  5350.0 0.054  

Limited Modular Approval. Output power listed is conducted. This device must be marketed for indoor use only. Co-located transmitter operating conditions with FCC ID:CJ6UPA3232BT has been evaluated as described in this filing. For use in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filings under this FCC ID, and must be installed in the manner specified therein. The grantee has to ensure the installation procedures comply with 15.407(d) integral antenna requirement which prevent the end user to access the transmitter module after the installation. This device must be installed in Toshiba laptop computers only by Toshiba or by Toshiba OEM dealers. User installation is prohibited. Use in portable RF exposure conditions is limited to the specific laptop computer configurations evaluated in this filing. The highest reported SAR value is: body - 5.2 GHz, 0.2 W/kg.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application fa0AhtlJbuap/4KTbMVmKw==

This application does not exist.

EAS Grant - Application fa0AhtlJbuap/4KTbMVmKw==

Mail To:
STEVE CHENG, EMC ENGINEERING MANAGER
COMPLIANCE CERTIFICATION SERVICES
561F MONTEREY ROAD
MORGAN HILL, CA 95037
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dynabook Inc.
6-15 Toyosu 5-chome, Koto-ku
Tokyo 135-8505,
Japan
  Date of Grant: 11/13/2003

Application Dated: 10/14/2003
 
Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CJ6UPA3234WL
Name of Grantee:  Dynabook Inc.
Equipment Class: Digital Transmission System
Notes: 802.11a/b MINIPCI TYPE 3B CARD
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.045  

Limited Modular Approval. Output power listed is conducted. This device must be marketed for indoor use only. Co-located transmitter operating conditions with FCC ID:CJ6UPA3232BT has been evaluated as described in this filing. For use in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filings under this FCC ID, and must be installed in the manner specified therein. The grantee has to ensure the installation procedures comply with 15.407(d) integral antenna requirement which prevents end user to access the transmitter module after the installation. This device must be installed in Toshiba laptop computers only by Toshiba or by Toshiba OEM dealers. User installation is prohibited. Use in portable exposure conditions is limited to the specific laptop computer configurations evaluated in this filing. The highest reported SAR values are: body - 2.4 GHz, 0.39 W/kg.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application 9FqIxf6/+U1vUzq9dixANA==

Mail To:
STEVE CHENG, EMC ENGINEERING MANAGER
COMPLIANCE CERTIFICATION SERVICES
561F MONTEREY ROAD
MORGAN HILL, CA 95037
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 07/18/2003

Application Dated: 07/18/2003
Dynabook Inc.
6-15 Toyosu 5-chome, Koto-ku
Tokyo 135-8505,
Japan
 
Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CJ6UPA3234WL
Name of Grantee:  Dynabook Inc.
Equipment Class: Digital Transmission System
Notes: 802.11 a/b Mini-PCI WLAN Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.045  

Limited module approval. Output power listed is conducted. This device must be marketed for indoor user only. This device may only be used in Toshiba laptops computer. Co-located transmitter operating conditions with FCC ID:CJ6UPA3232BT have been evaluated as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The grantee has to ensure the installation procedures comply with 15.407(d) integral antenna requirement which prevent the end user to access the transmitter module after the installation. This device must be installed by Toshiba or by Toshiba OEM dealers. This grant is valid only when the end user has no manual instructions to remove or install the device.

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application 9FqIxf6/+U1vUzq9dixANA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dynabook Inc.
6-15 Toyosu 5-chome, Koto-ku
Tokyo 135-8505,
Japan
  Date of Grant: 07/18/2003

Application Dated: 07/18/2003
 
Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CJ6UPA3234WL
Name of Grantee:  Dynabook Inc.
Equipment Class: Digital Transmission System
Notes: 802.11 a/b Mini-PCI WLAN Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.045  

Limited module approval. Output power listed is conducted. This device must be marketed for indoor user only. This device may only be used in Toshiba laptops computer. Co-located transmitter operating conditions with FCC ID:CJ6UPA3232BT have been evaluated as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The grantee has to ensure the installation procedures comply with 15.407(d) integral antenna requirement which prevent the end user to access the transmitter module after the installation. This device must be installed by Toshiba or by Toshiba OEM dealers. This grant is valid only when the end user has no manual instructions to remove or install the device.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: