FCC ID CJ6UPA3418BT

CSR V2.0 - BC04

by Dynabook Inc.

Grantee Code: CJ6   Product Code: UPA3418BT
Latest application date: 2006-11-30

FCC ID Device Details

FCC IDCJ6UPA3418BT
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeCJ6
Product CodeUPA3418BT
Applicant BusinessDynabook Inc. 🇯🇵
Related Domains dynabook.com
Equipment ClassCSR V2.0 - BC04
Test FirmCompliance Certification Services

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2006-11-30
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2005-04-07
2402-2480 MHzOriginal Equipment2005-02-28

Exhibits

DocumentTypeAvailableFile
Installation BluetoothUsers Manual2005-04-14PDF 424.3 KB
Notebook manualUsers Manual2005-04-14PDF 2.2 MB
Internal PhotosInternal Photos2005-04-14PDF 424.3 KB
External PhotosExternal Photos2005-04-14PDF 225.2 KB
WLAN and Bluetooth Antnena locationExternal Photos2005-04-14PDF 66.1 KB
FCC ID LabelID Label/Location Info2005-02-28PDF 68 KB
Setup PhotosTest Setup Photos2007-01-14PDF 170.2 KB
March 21 05 revised Test Setup PhotoTest Setup Photos2005-04-14PDF 559.4 KB
Setup Photos Metadata onlyTest Setup Photos2005-04-14PDF 554.7 KB
March 23 stand alone test setu photosTest Setup Photos2005-02-28PDF 321.9 KB
Test ReportTest Report2006-11-30PDF 525.8 KB
March 21 05 revised test reportTest Report2005-02-28PDF 1.6 MB
March 23 additional radiated stand alone test reportTest Report2005-02-28PDF 1.1 MB
Test Report Metadata onlyTest Report2005-02-28PDF 1.4 MB
Authorization LetterCover Letter(s)2006-11-30PDF 145 KB
Class II Permissive Change LetterCover Letter(s)2006-11-30PDF 66.4 KB
Request for ConfidentialityCover Letter(s)2006-11-30PDF 66.9 KB
TCB Q and ACover Letter(s)2006-11-30PDF 62.4 KB
Class II Permissive Change LetterCover Letter(s)2005-04-07PDF 43.6 KB
Reply to CRN 28744Cover Letter(s)2005-04-07PDF 615.3 KB
March 23 Agent authorization letterCover Letter(s)2005-02-28PDF 60.9 KB
March 23 Applicant letterCover Letter(s)2005-02-28PDF 57.7 KB
March 23 Request for modular approvalCover Letter(s)2005-02-28PDF 69.5 KB
March 23 TCB statementCover Letter(s)2005-02-28PDF 8 KB
Modular Approval LetterCover Letter(s)2005-02-28PDF 69.5 KB
Request for ConfidentialityCover Letter(s)2005-02-28PDF 62.8 KB
TCB March 21 files replacement statementCover Letter(s)2005-02-28PDF 7.9 KB
Antenna HTL004Parts List/Tune Up Info2005-02-28PDF 210.6 KB
Antenna HTL008Parts List/Tune Up Info2005-02-28PDF 535 KB
Antenna HTL017Parts List/Tune Up Info2005-02-28PDF 619.6 KB
Antenna TIAN01Parts List/Tune Up Info2005-02-28PDF 451.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 82.4 KB
Schematics Metadata onlySchematicsPDF 118.9 KB
Theory of Operation Metadata onlyOperational DescriptionPDF 936.1 KB

Application Information

Application ID/GQNxxbIoPCc2Pcr/n6HOg==
Final Action Date2006-11-30
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0003743994
ModelUPA3418BT
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionCSR V2.0 - BC04
Responsible PartyToru Kawasaki, Senior Manager, toru.kawasaki@dynabook.com , 81-50-5357-9235
Test FirmBarbara Judge, Compliance Certification Services, bjudge@ccsemc.com , 510-771-1104
TCB Emailmike.kuo@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Short-Term Confidentiality Date01/14/2007
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II permissive change filing. Modular approval. Output Power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except as documented in filings under this FCC ID. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided withtransmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
/GQNxxbIoPCc2Pcr/n6HOg==2006-11-30Class II permissive change or modification of presently authorized equipment
pvsPSG03VlQ4nINhCqsCxQ==2005-04-07Class II permissive change or modification of presently authorized equipment
qeTtgSY5/MZpKOeOxh++OA==2005-02-28Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.001400015C

Grants

TCB Grant - Application qeTtgSY5/MZpKOeOxh++OA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 02/28/2005

Application Dated: 02/28/2005
Dynabook Inc.
6-15 Toyosu 5-chome, Koto-ku
Tokyo 135-8505,
Japan
 
Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CJ6UPA3418BT
Name of Grantee:  Dynabook Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth V 2.0 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0014  

Modular approval. Co-located operating condition with WLAN FCC ID:CJ6UPA3426WL has been documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except under the following conditions. For operation in mobile exposure conditions, this device may be co-located without separate equipment authorization only in host products manufactured by the Grantee and OEMs authorized by the Grantee and for which the collocated transmitter has been authorized with this transmitter. For operation in portable exposure conditions, this device may be collocated only in host products manufactured by the Grantee and OEMs authorized by the Grantee. And, a separate equipment authorization will required for this device to be collocated with another authorized dominant transmitter.

EAS Grant - Application qeTtgSY5/MZpKOeOxh++OA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dynabook Inc.
6-15 Toyosu 5-chome, Koto-ku
Tokyo 135-8505,
Japan
  Date of Grant: 02/28/2005

Application Dated: 02/28/2005
 
Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CJ6UPA3418BT
Name of Grantee:  Dynabook Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth V 2.0 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0014  

Modular approval. Co-located operating condition with WLAN FCC ID:CJ6UPA3426WL has been documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except under the following conditions. For operation in mobile exposure conditions, this device may be co-located without separate equipment authorization only in host products manufactured by the Grantee and OEMs authorized by the Grantee and for which the collocated transmitter has been authorized with this transmitter. For operation in portable exposure conditions, this device may be collocated only in host products manufactured by the Grantee and OEMs authorized by the Grantee. And, a separate equipment authorization will required for this device to be collocated with another authorized dominant transmitter.



TCB Grant - Application pvsPSG03VlQ4nINhCqsCxQ==

This application does not exist.

EAS Grant - Application pvsPSG03VlQ4nINhCqsCxQ==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dynabook Inc.
6-15 Toyosu 5-chome, Koto-ku
Tokyo 135-8505,
Japan
  Date of Grant: 04/07/2005

Application Dated: 03/18/2005
 
Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CJ6UPA3418BT
Name of Grantee:  Dynabook Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth V1.2 Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0014  

This Permissive Change/Modification was originally issued on 04/06/2005.

Limited Modular Approval. Co-located operating conditions with certain transmitter FCC IDs have been evaluated as documented in filings under this FCC ID. For other configurations, this device must not be co-located or operating in conjunction with any other antenna or transmitter, except under the following conditions. For other co-located mobile or portable configurations in host products manufactured by the grantee or grantee-authorized OEMs, the grantee is responsible for compliance with 47 CFR 2.1091, 2.1093, and 15.31h,k, including separate permissive change application(s) if applicable demonstrating compliance for spurious emissions, SAR, MPE where applicable.



TCB Grant - Application /GQNxxbIoPCc2Pcr/n6HOg==

Mail To:
Michael Heckrotte, Engineering Manager
COMPLIANCE CERTIFICATION SERVICES
561F MONTEREY ROAD
MORGAN HILL, CA 95037
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 11/30/2006

Application Dated: 11/30/2006
Dynabook Inc.
6-15 Toyosu 5-chome, Koto-ku
Tokyo 135-8505,
Japan
 
Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CJ6UPA3418BT
Name of Grantee:  Dynabook Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: CSR V2.0 - BC04
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0014  

Class II permissive change filing. Modular approval. Output Power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except as documented in filings under this FCC ID. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided withtransmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


EAS Grant - Application /GQNxxbIoPCc2Pcr/n6HOg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dynabook Inc.
6-15 Toyosu 5-chome, Koto-ku
Tokyo 135-8505,
Japan
  Date of Grant: 11/30/2006

Application Dated: 11/30/2006
 
Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CJ6UPA3418BT
Name of Grantee:  Dynabook Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: CSR V2.0 - BC04
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0014  

Class II permissive change filing. Modular approval. Output Power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except as documented in filings under this FCC ID. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided withtransmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.



Mail To: