FCC ID CJ6UPA3426WL
802.11 b/g Half Size Mini-PCI WLAN Module
by Dynabook Inc.
Grantee Code: CJ6 Product Code: UPA3426WL
Latest application date: 2005-05-20
FCC ID Device Details
| FCC ID | CJ6UPA3426WL |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | CJ6 |
| Product Code | UPA3426WL |
| Applicant Business | Dynabook Inc. 🇯🇵 |
| Related Domains |  dynabook.com |
| Equipment Class | 802.11 b/g Half Size Mini-PCI WLAN Module |
| Test Firm | Compliance Certification Services Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-05-20 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-03-24 |
| 2412-2462 MHz | Original Equipment | 2005-02-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Instalation | Users Manual | 2005-04-14 | PDF 579.3 KB |
| User Manual | Users Manual | 2005-04-14 | PDF 811.6 KB |
| Internal Photos | Internal Photos | 2005-05-20 | PDF 1.1 MB |
| Internal Photos | Internal Photos | 2005-04-14 | PDF 133.8 KB |
| External Photos | External Photos | 2005-04-14 | PDF 145.8 KB |
| FCC ID Label | ID Label/Location Info | 2005-02-28 | PDF 42.5 KB |
| Test Setup Photos | Test Setup Photos | 2005-05-20 | PDF 356.1 KB |
| Setup Photos | Test Setup Photos | 2005-04-14 | PDF 626.7 KB |
| Setup Photos | Test Setup Photos | 2005-03-24 | PDF 419.8 KB |
| SAR Test Report | RF Exposure Info | 2005-05-20 | PDF 869.5 KB |
| Test Report | Test Report | 2005-05-20 | PDF 1.4 MB |
| Test Report | Test Report | 2005-03-24 | PDF 1.9 MB |
| Test Report 1 | Test Report | 2005-02-28 | PDF 2.8 MB |
| Test Report 2 | Test Report | 2005-02-28 | PDF 2.9 MB |
| Test Report 3 | Test Report | 2005-02-28 | PDF 3.9 MB |
| Request for Class II permissive change | Cover Letter(s) | 2005-05-20 | PDF 156.8 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2005-03-24 | PDF 148.5 KB |
| Modular Approval Letter | Cover Letter(s) | 2005-02-28 | PDF 74.4 KB |
| Request for Confidentiality | Cover Letter(s) | 2005-02-28 | PDF 62.3 KB |
| SAR Dipole Calibratin file | RF Exposure Info | 2005-05-20 | PDF 466.9 KB |
| SAR Probe Calibration File | RF Exposure Info | 2005-05-20 | PDF 646.4 KB |
| SAR System Validation Plots | RF Exposure Info | 2005-05-20 | PDF 261.1 KB |
| SAR Test Plots | RF Exposure Info | 2005-05-20 | PDF 864.6 KB |
| SAR Report | RF Exposure Info | 2005-03-24 | PDF 829.4 KB |
| SAR attachment 1 | RF Exposure Info | 2005-03-24 | PDF 256.6 KB |
| SAR attachment 2 | RF Exposure Info | 2005-03-24 | PDF 994.1 KB |
| SAR attachment 3 | RF Exposure Info | 2005-03-24 | PDF 430.5 KB |
| SAR attachment 4 | RF Exposure Info | 2005-03-24 | PDF 467.1 KB |
| Antenna HTL004 | Parts List/Tune Up Info | 2005-02-28 | PDF 210.6 KB |
| Antenna HTL008 | Parts List/Tune Up Info | 2005-02-28 | PDF 535 KB |
| Antenna HTL017 | Parts List/Tune Up Info | 2005-02-28 | PDF 619.6 KB |
| Antenna TIAN01 | Parts List/Tune Up Info | 2005-02-28 | PDF 451.2 KB |
| SAR Report | RF Exposure Info | 2005-02-28 | PDF 1.3 MB |
| SAR attachment 1 | RF Exposure Info | 2005-02-28 | PDF 310 KB |
| SAR attachment 2 | RF Exposure Info | 2005-02-28 | PDF 1.3 MB |
| SAR attachment 4 | RF Exposure Info | 2005-02-28 | PDF 467.1 KB |
| Block Diagram Metadata only | Block Diagram | PDF 10.4 KB | |
| Modified Block Diagram Metadata only | Block Diagram | PDF 10.4 KB | |
| Modified Schematic diagram Metadata only | Schematics | PDF 78.2 KB | |
| Schematics Metadata only | Schematics | PDF 78.1 KB | |
| Theory of Operation Metadata only | Operational Description | PDF 139.5 KB |
Application Information
| Application ID | aDedl1K8HpNL2sav4RkpWg== |
|---|---|
| Final Action Date | 2005-05-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0003743994 |
| Model | UPA3426WL |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11 b/g Half Size Mini-PCI WLAN Module |
| Responsible Party | Toru Kawasaki, Senior Manager, toru.kawasaki@dynabook.com , 81-50-5357-9235 |
| Agent | Mike Mike Mike, Compliance Certification Services, mheckrotte@ccsemc.com  , 408-463-0885 |
| Test Firm | Steve Cheng, Compliance Certification Services Inc, scheng@ccemc.com  , 408-463-0885 |
| TCB Email | mkuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add a new host computer incorporating co-located Bluetooth Module FCC ID:CJ6UPA3418BT to address section 2.1093 RF exposure requirement and modifications on certain components as documented in this filing. Limited Module Approval. "OEM integration only" and the device cannot be sold to the General Public. For use in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filings under this FCC ID, and must be installed in the manner specified therein. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. Installation of this device into other host products as portable device per section 2.1093 requirements requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported SAR value for this FCC ID is 0.0205 W/kg at 100% duty factor. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| aDedl1K8HpNL2sav4RkpWg== | 2005-05-20 | Class II permissive change or modification of presently authorized equipment |
| HS2z5Bhf/Q7/f8r/BTCImQ== | 2005-03-24 | Class II permissive change or modification of presently authorized equipment |
| zlFToz1Fwttx1KvpfMtC/g== | 2005-02-28 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.1981000 | 15C |
Grants
TCB Grant - Application zlFToz1Fwttx1KvpfMtC/g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 02/28/2005 Application Dated: 02/28/2005 |
| Dynabook Inc. |
| 6-15 Toyosu 5-chome, Koto-ku |
| Tokyo 135-8505, Japan |
| Attention: Toru Kawasaki , Senior Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CJ6UPA3426WL |
| Name of Grantee: | Dynabook Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g Half Size Mini-PCI WLAN Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1981 |
| Limited Module Approval. "OEM integration only" and the device cannot be sold to the General Public. Co-located transmitter operating conditions with FCC ID:CJ6UPA3232BT or FCC ID:CJ6UPA3418BT have been evaluated as described in this filing. For use in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filings under this FCC ID, and must be installed in the manner specified therein. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. Installation of this device into other host products as portable device per section 2.1093 requirements, requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported SAR value is 0.0191 W/kg at 100% duty factor. |
EAS Grant - Application zlFToz1Fwttx1KvpfMtC/g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan |
Date of Grant: 02/28/2005 Application Dated: 02/28/2005 |
| Attention: Toru Kawasaki , Senior Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CJ6UPA3426WL |
| Name of Grantee: | Dynabook Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g Half Size Mini-PCI WLAN Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1981 |
| Limited Module Approval. "OEM integration only" and the device cannot be sold to the General Public. Co-located transmitter operating conditions with FCC ID:CJ6UPA3232BT or FCC ID:CJ6UPA3418BT have been evaluated as described in this filing. For use in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filings under this FCC ID, and must be installed in the manner specified therein. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. Installation of this device into other host products as portable device per section 2.1093 requirements, requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported SAR value is 0.0191 W/kg at 100% duty factor. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/24/2005 Application Dated: 03/24/2005 |
| Dynabook Inc. |
| 6-15 Toyosu 5-chome, Koto-ku |
| Tokyo 135-8505, Japan |
| Attention: Toru Kawasaki , Senior Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CJ6UPA3426WL |
| Name of Grantee: | Dynabook Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g Half Size Mini-PCI WLAN Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1981 |
| Class II Permissive Change to add a new host computer incorporating co-located Bluetooth Module FCC ID:CJ6UPA3418BT. Limited Module Approval. "OEM integration only" and the device cannot be sold to the General Public. For use in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filings under this FCC ID, and must be installed in the manner specified therein. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. Installation of this device into other host products as portable device per section 2.1093 requirements requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported SAR value for this FCC ID is 0.0191 W/kg at 100% duty factor. |
EAS Grant - Application HS2z5Bhf/Q7/f8r/BTCImQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan |
Date of Grant: 03/24/2005 Application Dated: 03/24/2005 |
| Attention: Toru Kawasaki , Senior Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CJ6UPA3426WL |
| Name of Grantee: | Dynabook Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g Half Size Mini-PCI WLAN Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1981 |
| Class II Permissive Change to add a new host computer incorporating co-located Bluetooth Module FCC ID:CJ6UPA3418BT. Limited Module Approval. "OEM integration only" and the device cannot be sold to the General Public. For use in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filings under this FCC ID, and must be installed in the manner specified therein. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. Installation of this device into other host products as portable device per section 2.1093 requirements requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported SAR value for this FCC ID is 0.0191 W/kg at 100% duty factor. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/20/2005 Application Dated: 05/20/2005 |
| Dynabook Inc. |
| 6-15 Toyosu 5-chome, Koto-ku |
| Tokyo 135-8505, Japan |
| Attention: Toru Kawasaki , Senior Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CJ6UPA3426WL |
| Name of Grantee: | Dynabook Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g Half Size Mini-PCI WLAN Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1981 |
| Class II Permissive Change to add a new host computer incorporating co-located Bluetooth Module FCC ID:CJ6UPA3418BT to address section 2.1093 RF exposure requirement and modifications on certain components as documented in this filing. Limited Module Approval. "OEM integration only" and the device cannot be sold to the General Public. For use in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filings under this FCC ID, and must be installed in the manner specified therein. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. Installation of this device into other host products as portable device per section 2.1093 requirements requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported SAR value for this FCC ID is 0.0205 W/kg at 100% duty factor. |
EAS Grant - Application aDedl1K8HpNL2sav4RkpWg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan |
Date of Grant: 05/20/2005 Application Dated: 05/20/2005 |
| Attention: Toru Kawasaki , Senior Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CJ6UPA3426WL |
| Name of Grantee: | Dynabook Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g Half Size Mini-PCI WLAN Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1981 |
| Class II Permissive Change to add a new host computer incorporating co-located Bluetooth Module FCC ID:CJ6UPA3418BT to address section 2.1093 RF exposure requirement and modifications on certain components as documented in this filing. Limited Module Approval. "OEM integration only" and the device cannot be sold to the General Public. For use in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filings under this FCC ID, and must be installed in the manner specified therein. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. Installation of this device into other host products as portable device per section 2.1093 requirements requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported SAR value for this FCC ID is 0.0205 W/kg at 100% duty factor. |
| Mail To: |