FCC ID CJ6UPA3489WL

This application does not exist.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan

Date of Grant: 12/01/2006 Application Dated: 11/01/2006

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Dynabook Inc.
Equipment Class:	Digital Transmission System
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.318
	15C	5745.0  -  5825.0	0.1

Class II permissive change filing. Power output is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in manners specified therein may be used with this device. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all end-user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. As described in filings under this FCC ID, SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC IDs CJ6UPA3490G3, CJ6UPA3418BT), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for single- and co-transmit configurations under this FCC ID are: 2.4 GHz-band 0.49 W/kg; 5.2 GHz-band 0.88 W/kg; 5.8 GHz-band 1.01 W/kg; co-transmitting 1.36 W/kg.

TCB Grant - Application vruA4pcKo+NfzQWNF8HBgA==

EAS Grant - Application vruA4pcKo+NfzQWNF8HBgA==

TCB Grant - Application SXx8S/jqJSnImhyUg1miQw==

EAS Grant - Application SXx8S/jqJSnImhyUg1miQw==

Mail To:

Michael Heckrotte,

COMPLIANCE CERTIFICATION SERVICES

561F Monterey Road

Morgan Hill, CA 95037

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan

Date of Grant: 01/13/2006 Application Dated: 12/21/2005

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Dynabook Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15E	5180.0  -  5240.0	0.048
	15E	5260.0  -  5320.0	0.068

Power output is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. Only those antennas documented in filings under this FCC ID and installed in manners specified therein may be used with this device. This transmitter is restricted to indoor-only use within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all end-user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. SAR compliance was demonstrated for device with specific antenna-system (HTL017) in specific computer operating in portable RF exposure conditions as described in this filing; other antenna configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.49 W/kg; 5.2 GHz-band 0.79 W/kg; 5.8 GHz-band 1.01 W/kg.

TCB Grant - Application rHw8shuUaUNKbAWWQm++yQ==

EAS Grant - Application rHw8shuUaUNKbAWWQm++yQ==

Mail To:

Michael Heckrotte,

COMPLIANCE CERTIFICATION SERVICES

561F MONTEREY ROAD

MORGAN HILL, CA 95037

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan

Date of Grant: 09/06/2006 Application Dated: 08/11/2006

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Dynabook Inc.
Equipment Class:	Digital Transmission System
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.318
	15C	5745.0  -  5825.0	0.1

Power output is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in manners specified therein may be used with this device. This transmitter is restricted to indoor only use within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all end-user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. As described in filings under this FCC ID, SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC IDs CJ6UPA3490G3, CJ6UPA3418BT), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.49 W/kg; 5.2 GHz-band 0.88 W/kg; 5.8 GHz-band 1.01 W/kg.

TCB Grant - Application qvTBl+rHwbALxo57RRqIkQ==

EAS Grant - Application qvTBl+rHwbALxo57RRqIkQ==

TCB Grant - Application OmJFno3JBOrw4EFguoK1qQ==

Mail To:

Michael Heckrotte,

COMPLIANCE CERTIFICATION SERVICES

561F MONTEREY ROAD

MORGAN HILL, CA 95037

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 03/16/2007 Application Dated: 03/16/2007

Toshiba Corporation

Personal & Client Solutions Company

2-9, Suehiro-cho, Ome-shi

Tokyo 198-8710, Japan

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Toshiba Corporation
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5240.0	0.048
CC ND	15E	5260.0  -  5320.0	0.068

Class II permissive change filing. This UNII device complies with the Dynamic Frequency Selection (DFS) requirements in Section 15.407(h) for a client device without radar detection. Power output is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in manners specified therein may be used with this device. This transmitter is restricted to indoor only use within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all end-user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. As described in filings under this FCC ID, SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC IDs CJ6UPA3490G3, CJ6UPA3418BT), and with specific antenna-system(s); other antenna and multitransmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.49 W/kg; 5.2 GHz-band 0.88 W/kg; 5.8 GHz-band 1.01 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Toshiba Corporation Personal & Client Solutions Company 2-9, Suehiro-cho, Ome-shi Tokyo 198-8710, Japan

Date of Grant: 03/16/2007 Application Dated: 03/16/2007

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Toshiba Corporation
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5240.0	0.048
CC ND	15E	5260.0  -  5320.0	0.068

Class II permissive change filing. This UNII device complies with the Dynamic Frequency Selection (DFS) requirements in Section 15.407(h) for a client device without radar detection. Power output is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in manners specified therein may be used with this device. This transmitter is restricted to indoor only use within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all end-user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. As described in filings under this FCC ID, SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC IDs CJ6UPA3490G3, CJ6UPA3418BT), and with specific antenna-system(s); other antenna and multitransmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.49 W/kg; 5.2 GHz-band 0.88 W/kg; 5.8 GHz-band 1.01 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:

EA496487

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 10/31/2006 Application Dated: 10/31/2006

Dynabook Inc.

6-15 Toyosu 5-chome, Koto-ku

Tokyo 135-8505, Japan

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Dynabook Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5240.0	0.048
CC	15E	5260.0  -  5320.0	0.068

Class II permissive change filing. Power output is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in manners specified therein may be used with this device. This transmitter is restricted to indoor only use within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all end-user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. As described in filings under this FCC ID, SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC IDs CJ6UPA3490G3, CJ6UPA3418BT), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.49 W/kg; 5.2 GHz-band 0.88 W/kg; 5.8 GHz-band 1.01 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan

Date of Grant: 10/31/2006 Application Dated: 10/31/2006

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Dynabook Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5240.0	0.048
CC	15E	5260.0  -  5320.0	0.068

Class II permissive change filing. Power output is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in manners specified therein may be used with this device. This transmitter is restricted to indoor only use within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all end-user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. As described in filings under this FCC ID, SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC IDs CJ6UPA3490G3, CJ6UPA3418BT), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.49 W/kg; 5.2 GHz-band 0.88 W/kg; 5.8 GHz-band 1.01 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application m76tK9i3bThAV3nZEs6xeQ==

EAS Grant - Application m76tK9i3bThAV3nZEs6xeQ==

TCB Grant - Application lw7bYUegGEWELlOMNUf0PA==

EAS Grant - Application lw7bYUegGEWELlOMNUf0PA==

TCB Grant - Application la2rzdtfiW/4knNkUw7usA==

EAS Grant - Application la2rzdtfiW/4knNkUw7usA==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan

Date of Grant: 01/13/2006 Application Dated: 12/21/2005

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Dynabook Inc.
Equipment Class:	Digital Transmission System
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.318
	15C	5745.0  -  5825.0	0.1

Power output is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. Only those antennas documented in filings under this FCC ID and installed in manners specified therein may be used with this device. This transmitter is restricted to indoor-only use within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all end-user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. SAR compliance was demonstrated for device with specific antenna-system (HTL017) in specific computer operating in portable RF exposure conditions as described in this filing; other antenna configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.49 W/kg; 5.2 GHz-band 0.79 W/kg; 5.8 GHz-band 1.01 W/kg.

TCB Grant - Application KW+Up7Z3FEFXphWM2oj1Hg==

EAS Grant - Application KW+Up7Z3FEFXphWM2oj1Hg==

Mail To:

Michael Heckrotte,

COMPLIANCE CERTIFICATION SERVICES

561F MONTEREY ROAD

MORGAN HILL, CA 95037

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan

Date of Grant: 12/01/2006 Application Dated: 11/01/2006

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Dynabook Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15E	5180.0  -  5240.0	0.048
	15E	5260.0  -  5320.0	0.068

Class II permissive change filing. Power output is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in manners specified therein may be used with this device. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all end-user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. As described in filings under this FCC ID, SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC IDs CJ6UPA3490G3, CJ6UPA3418BT), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for single- and co-transmit configurations under this FCC ID are: 2.4 GHz-band 0.49 W/kg; 5.2 GHz-band 0.88 W/kg; 5.8 GHz-band 1.01 W/kg; co-transmitting 1.36 W/kg.

TCB Grant - Application jgK+nfAtqgu6feZSjknovQ==

EAS Grant - Application jgK+nfAtqgu6feZSjknovQ==

Mail To:

Michael Heckrotte,

COMPLIANCE CERTIFICATION SERVICES

561F Monterey Road

Morgan Hill, CA 95037

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan

Date of Grant: 04/07/2006 Application Dated: 03/31/2006

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Dynabook Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15E	5180.0  -  5240.0	0.048
	15E	5260.0  -  5320.0	0.068

Power output is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. Only those antennas documented in filings under this FCC ID and installed in manners specified therein may be used with this device. This transmitter is restricted to indoor only use within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all end-user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. As described in filings under this FCC ID, SAR compliance was demonstrated for device in specific final product operating in portable RF exposure conditions with specific multi-transmitter configuration (associated FCC IDs CJ6UPA3490G3, CJ6UPA3418BT), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.49 W/kg; 5.2 GHz-band 0.79 W/kg; 5.8 GHz-band 1.01 W/kg.

TCB Grant - Application h5G6sXmcUijeRmpjgX4o8g==

Mail To:

Michael Heckrotte,

COMPLIANCE CERTIFICATION SERVICES

561F MONTEREY ROAD

MORGAN HILL, CA 95037

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 12/12/2005 Application Dated: 12/12/2005

Dynabook Inc.

6-15 Toyosu 5-chome, Koto-ku

Tokyo 135-8505, Japan

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Dynabook Inc.
Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15B	-

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan

Date of Grant: 12/12/2005 Application Dated: 12/12/2005

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Dynabook Inc.
Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15B	-

TCB Grant - Application awl8Oa/+UN6bT+o43WwXng==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 11/28/2007 Application Dated: 11/28/2007

Toshiba Corporation

Personal & Client Solutions Company

2-9, Suehiro-cho, Ome-shi

Tokyo 198-8710, Japan

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Toshiba Corporation
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless 3945ABG Network Connection
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5260.0  -  5320.0	0.068
CC	15E	5180.0  -  5240.0	0.048

Class II permissive change filing. Power output is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in manners specified therein may be used with this device. This transmitter is restricted to indoor only use within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. All end-user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. As described in filings under this FCC ID, SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC ID RYYEYTFXCS), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.49 W/kg; 5.2 GHz-band 1.200 W/kg; 5.8 GHz-band 1.560 W/kg. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. 5250MHz frequency range.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Toshiba Corporation Personal & Client Solutions Company 2-9, Suehiro-cho, Ome-shi Tokyo 198-8710, Japan

Date of Grant: 11/28/2007 Application Dated: 11/28/2007

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Toshiba Corporation
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless 3945ABG Network Connection
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5260.0  -  5320.0	0.068
CC	15E	5180.0  -  5240.0	0.048

Class II permissive change filing. Power output is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in manners specified therein may be used with this device. This transmitter is restricted to indoor only use within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. All end-user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. As described in filings under this FCC ID, SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC ID RYYEYTFXCS), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.49 W/kg; 5.2 GHz-band 1.200 W/kg; 5.8 GHz-band 1.560 W/kg. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. 5250MHz frequency range.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 8amrzEXZyfwtMrm17g3XwA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 12/12/2005 Application Dated: 12/12/2005

Dynabook Inc.

6-15 Toyosu 5-chome, Koto-ku

Tokyo 135-8505, Japan

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Dynabook Inc.
Equipment Class:	Digital Transmission System
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.318
CC	15C	5745.0  -  5825.0	0.1

Power Output is Conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan

Date of Grant: 12/12/2005 Application Dated: 12/12/2005

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Dynabook Inc.
Equipment Class:	Digital Transmission System
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.318
CC	15C	5745.0  -  5825.0	0.1

Power Output is Conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 82FtDSbfEgB2hzDxzBd1+w==

EAS Grant - Application 82FtDSbfEgB2hzDxzBd1+w==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan

Date of Grant: 04/07/2006 Application Dated: 03/31/2006

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Dynabook Inc.
Equipment Class:	Digital Transmission System
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.318
	15C	5745.0  -  5825.0	0.1

Power output is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. Only those antennas documented in filings under this FCC ID and installed in manners specified therein may be used with this device. This transmitter is restricted to indoor only use within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all end-user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. As described in filings under this FCC ID, SAR compliance was demonstrated for device in specific final product operating in portable RF exposure conditions with specific multi-transmitter configuration (associated FCC IDs CJ6UPA3490G3, CJ6UPA3418BT), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.49 W/kg; 5.2 GHz-band 0.79 W/kg; 5.8 GHz-band 1.01 W/kg.

TCB Grant - Application 7e5fZ6BElUEe339GGFLFPQ==

Mail To:

Michael Heckrotte,

COMPLIANCE CERTIFICATION SERVICES

561F MONTEREY ROAD

MORGAN HILL, CA 95037

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 11/28/2007 Application Dated: 11/28/2007

Toshiba Corporation

Personal & Client Solutions Company

2-9, Suehiro-cho, Ome-shi

Tokyo 198-8710, Japan

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Toshiba Corporation
Equipment Class:	Digital Transmission System
Notes:	Wireless 3945ABG Network Connection
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.318
CC	15C	5745.0  -  5825.0	0.1

Class II permissive change filing. Power output is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in manners specified therein may be used with this device. This transmitter is restricted to indoor only use within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. All end-user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. As described in filings under this FCC ID, SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC ID RYYEYTFXCS), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.49 W/kg; 5.2 GHz-band 1.200 W/kg; 5.8 GHz-band 1.560 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Toshiba Corporation Personal & Client Solutions Company 2-9, Suehiro-cho, Ome-shi Tokyo 198-8710, Japan

Date of Grant: 11/28/2007 Application Dated: 11/28/2007

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Toshiba Corporation
Equipment Class:	Digital Transmission System
Notes:	Wireless 3945ABG Network Connection
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.318
CC	15C	5745.0  -  5825.0	0.1

Class II permissive change filing. Power output is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in manners specified therein may be used with this device. This transmitter is restricted to indoor only use within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. All end-user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. As described in filings under this FCC ID, SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC ID RYYEYTFXCS), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.49 W/kg; 5.2 GHz-band 1.200 W/kg; 5.8 GHz-band 1.560 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 5vtTtXR6BUAYQpvw7NRkBg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 10/31/2006 Application Dated: 10/31/2006

Dynabook Inc.

6-15 Toyosu 5-chome, Koto-ku

Tokyo 135-8505, Japan

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Dynabook Inc.
Equipment Class:	Digital Transmission System
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.318
CC	15C	5745.0  -  5825.0	0.1

Class II permissive change filing. Power output is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in manners specified therein may be used with this device. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all end-user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. As described in filings under this FCC ID, SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC IDs CJ6UPA3490G3, CJ6UPA3418BT), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.49 W/kg; 5.2 GHz-band 0.88 W/kg; 5.8 GHz-band 1.01 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan

Date of Grant: 10/31/2006 Application Dated: 10/31/2006

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Dynabook Inc.
Equipment Class:	Digital Transmission System
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.318
CC	15C	5745.0  -  5825.0	0.1

Class II permissive change filing. Power output is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in manners specified therein may be used with this device. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all end-user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. As described in filings under this FCC ID, SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC IDs CJ6UPA3490G3, CJ6UPA3418BT), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.49 W/kg; 5.2 GHz-band 0.88 W/kg; 5.8 GHz-band 1.01 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 0SVN92CRi8YPWPNCSNgdWg==

EAS Grant - Application 0SVN92CRi8YPWPNCSNgdWg==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan

Date of Grant: 09/06/2006 Application Dated: 08/11/2006

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Dynabook Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15E	5180.0  -  5240.0	0.048
	15E	5260.0  -  5320.0	0.068

Power output is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in manners specified therein may be used with this device. This transmitter is restricted to indoor only use within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all end-user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. As described in filings under this FCC ID, SAR compliance was demonstrated for device in specific final product(s) operating in portable RF exposure conditions with specific multi-transmitter configuration(s) (associated FCC IDs CJ6UPA3490G3, CJ6UPA3418BT), and with specific antenna-system(s); other antenna and multi-transmitter configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.49 W/kg; 5.2 GHz-band 0.88 W/kg; 5.8 GHz-band 1.01 W/kg.

TCB Grant - Application +nzL63kngpYlYIHp3atjyA==

Mail To:

Michael Heckrotte,

COMPLIANCE CERTIFICATION SERVICES

561F MONTEREY ROAD

MORGAN HILL, CA 95037

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 12/12/2005 Application Dated: 12/12/2005

Dynabook Inc.

6-15 Toyosu 5-chome, Koto-ku

Tokyo 135-8505, Japan

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Dynabook Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5240.0	0.048
CC	15E	5260.0  -  5320.0	0.068

Power Output is Conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan

Date of Grant: 12/12/2005 Application Dated: 12/12/2005

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3489WL
Name of Grantee:	Dynabook Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless LAN Mini-PCI Express, 802.11a/b/g
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5240.0	0.048
CC	15E	5260.0  -  5320.0	0.068

Power Output is Conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To: