FCC ID CJ6UPA3490G3

This application does not exist.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan

Date of Grant: 03/31/2006 Application Dated: 03/02/2006

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3490G3
Name of Grantee:	Dynabook Inc.
Equipment Class:	PCS Licensed Transmitter
Notes:	CDMA Cell-PCS Module
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	24E	1851.25  -  1908.75	0.282	2.5  PM	1M25F9W
	22H	824.7  -  848.3	0.282	2.5  PM	1M25F9W

Output power is conducted; highest radiated power in specific final product(s) for filings under this FCC ID is Part 22 0.525 W ERP and Part 24 0.724 W EIRP. For operation in mobile RF exposure conditions, this transmitter is restricted for use with antenna(s) with a gain of no more than 5 dBi; antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter not described in filings under this FCC ID. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all end-user installation is expressly prohibited. End-users must be provided with specific information required to satisfy RF exposure compliance. SAR compliance was demonstrated for device in specific multi-transmitter (associated FCC IDs CJ6UPA3489WL, CJ6UPA3418BT) final product in portable RF exposure conditions as described in this filing; other configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: Part 22 0.16 W/kg; Part 24 0.14 W/kg.

TCB Grant - Application UZsNW1bsulWTz++ec6lLog==

EAS Grant - Application UZsNW1bsulWTz++ec6lLog==

Mail To:

Michael Heckrotte,

COMPLIANCE CERTIFICATION SERVICES

561F MONTEREY ROAD

MORGAN HILL, CA 95037

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan

Date of Grant: 09/06/2006 Application Dated: 08/11/2006

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3490G3
Name of Grantee:	Dynabook Inc.
Equipment Class:	PCS Licensed Transmitter
Notes:	CDMA Cell-PCS Module
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	24E	1851.25  -  1908.75	0.282	2.5  PM	1M25F9W
	22H	824.7  -  848.3	0.282	2.5  PM	1M25F9W

Output power is conducted; highest radiated power in specific final product(s) for filings under this FCC ID is: Part 22 0.525 W ERP and Part 24 0.724 W EIRP. For operation in mobile RF exposure conditions, this transmitter is restricted for use with antenna(s) with a gain of no more than 5 dBi; antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter not described in filings under this FCC ID. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all end-user installation is expressly prohibited. End-users must be provided with specific information required to satisfy RF exposure compliance. SAR compliance was demonstrated for device in specific multi-transmitter (associated FCC IDs CJ6UPA3440WL, CJ6UPA3489WL, CJ6UPA3501WL, CJ6UPA3503WL, CJ6UPA3418BT) final product(s) in portable RF exposure conditions as described in this filing; other configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for filings under this FCC ID are: Part 22 0.16 W/kg; Part 24 0.31 W/kg.

TCB Grant - Application UlcWeMbKko4viKFzXtR9+g==

Mail To:

Michael Heckrotte,

COMPLIANCE CERTIFICATION SERVICES

561F MONTEREY ROAD

MORGAN HILL, CA 95037

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 02/28/2006 Application Dated: 02/28/2006

Dynabook Inc.

6-15 Toyosu 5-chome, Koto-ku

Tokyo 135-8505, Japan

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3490G3
Name of Grantee:	Dynabook Inc.
Equipment Class:	PCS Licensed Transmitter
Notes:	CDMA Cell-PCS Module

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	24E	1851.25  -  1908.75	0.282	2.5  PM	1M25F9W
	22H	824.7  -  848.3	0.282	2.5  PM	1M25F9W

Power listed is conducted. Per applicant this transmitter is restricted for use with antenna(s) with a gain of no more than 5 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users installation is prohibited and end-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan

Date of Grant: 02/28/2006 Application Dated: 02/28/2006

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3490G3
Name of Grantee:	Dynabook Inc.
Equipment Class:	PCS Licensed Transmitter
Notes:	CDMA Cell-PCS Module
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	24E	1851.25  -  1908.75	0.282	2.5  PM	1M25F9W
	22H	824.7  -  848.3	0.282	2.5  PM	1M25F9W

Power listed is conducted. Per applicant this transmitter is restricted for use with antenna(s) with a gain of no more than 5 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users installation is prohibited and end-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices.

TCB Grant - Application ApQFOXcu46NrjLR5dv4CQg==

EAS Grant - Application ApQFOXcu46NrjLR5dv4CQg==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc. 6-15 Toyosu 5-chome, Koto-ku Tokyo 135-8505, Japan

Date of Grant: 12/01/2006 Application Dated: 10/27/2006

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA3490G3
Name of Grantee:	Dynabook Inc.
Equipment Class:	PCS Licensed Transmitter
Notes:	CDMA Cell-PCS Module
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	24E	1851.25  -  1908.75	0.282	2.5  PM	1M25F9W
	22H	824.7  -  848.3	0.282	2.5  PM	1M25F9W

Output power is conducted; highest radiated power in specific final product(s) for filings under this FCC ID is: Part 22 0.525 W ERP and Part 24 0.794 W EIRP. For operation in mobile RF exposure conditions, this transmitter is restricted for use with antenna(s) with a gain of no more than 5 dBi; antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter not described in filings under this FCC ID. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all end-user installation is expressly prohibited. End-users must be provided with specific information required to satisfy RF exposure compliance. SAR compliance was demonstrated for device in specific multi-transmitter (associated FCC IDs CJ6UPA3440WL, CJ6UPA3489WL, CJ6UPA3501WL, CJ6UPA3503WL, CJ6UPA3418BT) final product(s) in portable RF exposure conditions as described in this filing; other configurations require separate SAR routine evaluations where applicable. The highest reported body SAR values for single- and co-transmit configurations under this FCC ID are: Part 22 0.16 W/kg; Part 24 0.57 W/kg; co-transmitting 0.62 W/kg.

Mail To:

Michael Heckrotte,

COMPLIANCE CERTIFICATION SERVICES

561F Monterey Road

Morgan Hill, CA 95037