FCC ID CJ6UPA3724WL
802.11 b/g/n Minicard
by Toshiba Client Solutions CO., LTD.
Grantee Code: CJ6 Product Code: UPA3724WL
Latest application date: 2009-03-30
FCC ID Device Details
| FCC ID | CJ6UPA3724WL |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | CJ6 |
| Product Code | UPA3724WL |
| Applicant Business | Toshiba Client Solutions CO., LTD. 🇯🇵 |
| Related Domains |  toshiba.co.jp |
| Equipment Class | 802.11 b/g/n Minicard |
| Test Firm | Compliance Certification Services |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2009-03-30 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: TX2-RTL8192EHMC Grant Date: 11/03/2008 | 2009-03-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Regulatory Section of User Manual | Users Manual | 2009-03-30 | PDF 369.7 KB |
| Antenna Placement | Internal Photos | 2009-03-30 | PDF 178.9 KB |
| External Photos | External Photos | 2009-03-30 | PDF 210.3 KB |
| Label format | ID Label/Location Info | 2009-03-30 | PDF 381.2 KB |
| ID Label | ID Label/Location Info | 2009-03-18 | PDF 381.2 KB |
| Authorization letter | Cover Letter(s) | 2009-03-30 | PDF 334.6 KB |
| Class II permissive change letter | Cover Letter(s) | 2009-03-30 | PDF 20.3 KB |
| Authorization Letter | Cover Letter(s) | 2009-03-18 | PDF 334.6 KB |
| Realtek Authorization letter | Cover Letter(s) | 2009-03-18 | PDF 15.7 KB |
| Toshiba Application Letter | Cover Letter(s) | 2009-03-18 | PDF 155.3 KB |
| Hitachi Antenna Specification | Parts List/Tune Up Info | 2009-03-30 | PDF 400.9 KB |
| MPE Calculation Report | RF Exposure Info | 2009-03-30 | PDF 137.9 KB |
| Tyco Antenna Specification | Parts List/Tune Up Info | 2009-03-30 | PDF 407.6 KB |
Application Information
| Application ID | lOIYNVqotrTlU133vucR+Q== |
|---|---|
| Final Action Date | 2009-03-30 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0003743994 |
| Model | UPA3724WL |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11 b/g/n Minicard |
| Responsible Party | Toru Kawasaki, Group Manager, toru.kawasaki@toshiba.co.jp , 81-0428-34-1051 |
| Agent | Thu Thu Thu, Compliance Certification Services, thu.chan@ccsemc.com  , 510-771-1000 |
| Test Firm | Thu Chan, Compliance Certification Services, thu.chan@ccsemc.com , 510-771-1122 |
| TCB Email | mike.kuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to allow co-location in mobile host. Output power listed is conducted. Limited Modular Approval for mobile RF Exposure conditions, Device is a draft 802.11n Half MiniCard operating in a 1x2 MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Limited Single Modular |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| lOIYNVqotrTlU133vucR+Q== | 2009-03-30 | Class II permissive change or modification of presently authorized equipment |
| bNe3fzzq9XlcCD7oaKPRaw== | 2009-03-18 | Change in identification of presently authorized equipment. Original FCC ID: TX2-RTL8192EHMC Grant Date: 11/03/2008 |
Equipment Authorization
Grants
TCB Grant - Application lOIYNVqotrTlU133vucR+Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/30/2009 Application Dated: 03/30/2009 |
| Toshiba Corporation |
| Personal & Client Solutions Company |
| 2-9, Suehiro-cho, Ome-shi |
| Tokyo 198-8710, Japan |
| Attention: Toru Kawasaki , Group Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CJ6UPA3724WL |
| Name of Grantee: | Toshiba Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g/n Minicard |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.309 |
| Class II Permissive Change to allow co-location in mobile host. Output power listed is conducted. Limited Modular Approval for mobile RF Exposure conditions, Device is a draft 802.11n Half MiniCard operating in a 1x2 MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Limited Single Modular |
EAS Grant - Application lOIYNVqotrTlU133vucR+Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Toshiba Corporation Personal & Client Solutions Company 2-9, Suehiro-cho, Ome-shi Tokyo 198-8710, Japan |
Date of Grant: 03/30/2009 Application Dated: 03/30/2009 |
| Attention: Toru Kawasaki , Group Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CJ6UPA3724WL |
| Name of Grantee: | Toshiba Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g/n Minicard |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.309 |
| Class II Permissive Change to allow co-location in mobile host. Output power listed is conducted. Limited Modular Approval for mobile RF Exposure conditions, Device is a draft 802.11n Half MiniCard operating in a 1x2 MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Limited Single Modular |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/18/2009 Application Dated: 03/18/2009 |
| Toshiba Corporation |
| Personal & Client Solutions Company |
| 2-9, Suehiro-cho, Ome-shi |
| Tokyo 198-8710, Japan |
| Attention: Toru Kawasaki , Group Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CJ6UPA3724WL |
| Name of Grantee: | Toshiba Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g/n RTL8192E half miniCard |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2412.0 - 2462.0 | 0.309 |
| Output power listed is conducted. Limited Modular Approval for mobile RF Exposure conditions, Device is a draft 802.11n Half MiniCard operating in a 1x2 MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application bNe3fzzq9XlcCD7oaKPRaw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Toshiba Corporation Personal & Client Solutions Company 2-9, Suehiro-cho, Ome-shi Tokyo 198-8710, Japan |
Date of Grant: 03/18/2009 Application Dated: 03/18/2009 |
| Attention: Toru Kawasaki , Group Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CJ6UPA3724WL |
| Name of Grantee: | Toshiba Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g/n RTL8192E half miniCard |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2412.0 - 2462.0 | 0.309 |
| Output power listed is conducted. Limited Modular Approval for mobile RF Exposure conditions, Device is a draft 802.11n Half MiniCard operating in a 1x2 MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |