FCC ID CJ6UPA5125WB

Wireless Network Adapter Module

by Dynabook Inc.

Grantee Code: CJ6 Product Code: UPA5125WB

Latest application date: 2014-05-06

FCC ID Device Details

FCC ID	CJ6UPA5125WB
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	CJ6
Product Code	UPA5125WB
Applicant Business	Dynabook Inc. 🇯🇵
Related Domains	dynabook.com ccsrf.com
Equipment Class	Wireless Network Adapter Module
Test Firm	Compliance Certification Services Inc.

Operating Frequencies

Frequency Range	Application Purpose	Final Action Date
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2014-05-06
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2014-05-06
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2014-05-06
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2013-09-16
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2013-09-16
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2013-09-16
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2013-07-05
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2013-07-05
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2013-07-05
2402-2480 MHz	Change in identification of presently authorized equipment. Original FCC ID: PD97260NG Grant Date: 04/17/2013	2013-06-19
5180-5240 MHz	Change in identification of presently authorized equipment. Original FCC ID: PD97260NG Grant Date: 04/17/2013	2013-06-19
2402-2480 MHz	Change in identification of presently authorized equipment. Original FCC ID: PD97260NG Grant Date: 04/17/2013	2013-06-19

Exhibits

Document	Type	Available	File
USer Manual	Users Manual	2014-08-08	PDF 439.1 KB
User Manual	Users Manual	2014-08-08	PDF 439.1 KB
Photos Antenna Location	Internal Photos	2014-08-08	PDF 199.4 KB
Photos Internal	Internal Photos	2014-08-08	PDF 305.9 KB
Internal Photos	Internal Photos	2013-12-16	PDF 90.3 KB
Photos External	External Photos	2014-08-08	PDF 177.1 KB
External Photos	External Photos	2013-12-16	PDF 138.7 KB
Label	ID Label/Location Info	2014-05-06	PDF 528.9 KB
Label Drawing and Location	ID Label/Location Info	2013-06-19	PDF 212.5 KB
Label and Location	ID Label/Location Info	2013-06-19	PDF 212.5 KB
Photos SAR	Test Setup Photos	2014-08-08	PDF 304.9 KB
Photos Test Setup	Test Setup Photos	2014-08-08	PDF 66 KB
Photos Test Setup	Test Setup Photos	2014-08-08	PDF 66 KB
03 (Short term Confidential)FCC setup photo	Test Setup Photos	2014-03-15	PDF 919.5 KB
03 (Short term Confidential)FCC setup photo	Test Setup Photos	2014-01-01	PDF 1.1 MB
Test Report	Test Report	2014-05-06	PDF 1,014.6 KB
Test Report	Test Report	2014-05-06	PDF 1 MB
Letter of Attestation_Model Number	Cover Letter(s)	2013-06-19	PDF 176.8 KB
Agent Letter	Cover Letter(s)	2014-05-06	PDF 69.4 KB
C2PC Letter	Cover Letter(s)	2014-05-06	PDF 24.8 KB
Confidentiality Letter	Cover Letter(s)	2014-05-06	PDF 45.1 KB
DoC Letter	Cover Letter(s)	2014-05-06	PDF 20.5 KB
Signatory Letter	Cover Letter(s)	2014-05-06	PDF 23.4 KB
02 Authority_to_Act_as_Agent_CJ6UPA5125WB	Cover Letter(s)	2013-09-16	PDF 205.7 KB
02 Confidentiality_request_CJ6UPA5125WB_248H-DPA5125WB	Cover Letter(s)	2013-09-16	PDF 29.6 KB
02 FCC_Class_II_Permissive_Change_Letter_CJ6UPA5125WB	Cover Letter(s)	2013-09-16	PDF 190.5 KB
02 FCC_MA_letter_CJ6UPA5125WB	Cover Letter(s)	2013-09-16	PDF 375.5 KB
02 Authority_to_Act_as_Agent_CJ6UPA5125WB	Cover Letter(s)	2013-07-05	PDF 209.2 KB
02 Confidentiality_request_CJ6UPA5125WB	Cover Letter(s)	2013-07-05	PDF 338.5 KB
02 FCC_Class_II_Permissive_Change_Letter_CJ6UPA5125WB	Cover Letter(s)	2013-07-05	PDF 183.4 KB
02 FCC_MA_letter_CJ6UPA5125WB	Cover Letter(s)	2013-07-05	PDF 384.4 KB
Authority to Act as Agent	Cover Letter(s)	2013-06-19	PDF 209.2 KB
Authorization Letter	Cover Letter(s)	2013-06-19	PDF 22.2 KB
Change of ID Letter	Cover Letter(s)	2013-06-19	PDF 176.8 KB
FCC Agent Authorization Letter	Cover Letter(s)	2013-06-19	PDF 209.2 KB
FCC Change of ID Authorization Letter	Cover Letter(s)	2013-06-19	PDF 22.2 KB
FCC Confidentiality Letter	Cover Letter(s)	2013-06-19	PDF 337.7 KB
FCC Declaraion Letter of Changing ID	Cover Letter(s)	2013-06-19	PDF 176.8 KB
SAR DAE	RF Exposure Info	2014-05-06	PDF 1.8 MB
SAR Dipole 2.4G	RF Exposure Info	2014-05-06	PDF 2.4 MB
SAR Dipole 5G	RF Exposure Info	2014-05-06	PDF 4.4 MB
SAR Dipole 5g	RF Exposure Info	2014-05-06	PDF 4.4 MB
SAR Probe	RF Exposure Info	2014-05-06	PDF 2.9 MB
SAR Report	RF Exposure Info	2014-05-06	PDF 1.3 MB
SAR Report (For BT Exclusion)	RF Exposure Info	2014-05-06	PDF 1.3 MB
SAR System Performance Check	RF Exposure Info	2014-05-06	PDF 1.1 MB
SAR Test Plots 2.4G	RF Exposure Info	2014-05-06	PDF 451 KB
SAR Test Plots 5G	RF Exposure Info	2014-05-06	PDF 2.5 MB
03 FCC report-R1-1	RF Exposure Info	2013-09-16	PDF 1.8 MB
03 FCC report-R1-2	RF Exposure Info	2013-09-16	PDF 3.4 MB
03 FCC report-R1-3	RF Exposure Info	2013-09-16	PDF 3.1 MB
03 FCC report-R1-4	RF Exposure Info	2013-09-16	PDF 3 MB
03 FCC report-R1-5	RF Exposure Info	2013-09-16	PDF 2.7 MB
03 FCC report-R1-6	RF Exposure Info	2013-09-16	PDF 2.1 MB
03 FCC report-1	RF Exposure Info	2013-07-05	PDF 1.4 MB
03 FCC report-2	RF Exposure Info	2013-07-05	PDF 2.3 MB
03 FCC report-3	RF Exposure Info	2013-07-05	PDF 2.9 MB
03 FCC report-4	RF Exposure Info	2013-07-05	PDF 2.4 MB
Block Diagram Metadata only	Block Diagram		PDF 24.1 KB
Block Diagram System Metadata only	Block Diagram		PDF 24.1 KB
Schematic Metadata only	Schematics		PDF 648 KB
Schematics Metadata only	Schematics		PDF 648 KB
Antenna Location Metadata only	Operational Description		PDF 155.8 KB
Antenna Spec Metadata only	Operational Description		PDF 1.2 MB

Application Information

Application ID	VxHAQ7t//RahX+ZD8eblBQ==
Final Action Date	2014-05-06
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0003743994
Model	UPA5125WB
Frequency Range	2402-2480 MHz
Equipment Class	DTS - Digital Transmission System
Device Description	Wireless Network Adapter Module
Responsible Party	Toru Kawasaki, Senior Manager, toru.kawasaki@dynabook.com , 81-50-5357-9235
Technical Contact	Winnie Chen, Compliance Certification Services Inc., winnie.chen@ccsrf.com , 886-3-5921698
Non-Technical Contact	Winnie Chen, Compliance Certification Services Inc., winnie.chen@ccsrf.com , 886-3-5921698
Test Firm	Winnie Chen, Compliance Certification Services Inc., winnie.chen@ccsrf.com , 886-3-5921698
TCB Email	LST.FRE.CertNotice@ul.com
TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term Confidentiality	Yes
Short-Term Confidentiality Date	08/08/2014
Long-Term Confidentiality	Yes
Grant Deferral	No
Modular Equipment	Single Modular Approval
Composite Device	Yes
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.77 W/kg. Simultaneous TX:1.04W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. Class II Permissive Change to install this module in a specific notebook/tablet host with SAR documented in this filing. The highest reported SAR is 0.81 W/kg. The highest reported SAR for all filings under this FCCID for stand-alone and simultaneous transmission exposure conditions are 0.81W/kg and 1.04 W/kg respectively.

Applications

Application ID	Date	Purpose
VxHAQ7t//RahX+ZD8eblBQ==	2014-05-06	Class II permissive change or modification of presently authorized equipment
QBg/krxmw3yiG3P8Savn9Q==	2014-05-06	Class II permissive change or modification of presently authorized equipment
FtyaD2LwQzF8mjcNCiyFZA==	2014-05-06	Class II permissive change or modification of presently authorized equipment
DLyCFW9+8vFLXcx6F7EzTg==	2013-09-16	Class II permissive change or modification of presently authorized equipment
6IX4EhAF5cXnVHNOmcO/Xg==	2013-09-16	Class II permissive change or modification of presently authorized equipment
5oNAvObfcz3QQOxwg14FpA==	2013-09-16	Class II permissive change or modification of presently authorized equipment
34y75c+1V9IjnkSycLKJNw==	2013-09-16	Class II permissive change or modification of presently authorized equipment
lUtzLcng8N8QYQyNMUF+9Q==	2013-07-05	Class II permissive change or modification of presently authorized equipment
jv63gVnfu83zpGECIjEEyw==	2013-07-05	Class II permissive change or modification of presently authorized equipment
iA+ctJ0QVYxUoSnP/bTXng==	2013-07-05	Class II permissive change or modification of presently authorized equipment
XyALKzSHAJyOWbndghzDkQ==	2013-07-05	Class II permissive change or modification of presently authorized equipment
o/yxvHrXrtzVuLmomn02xA==	2013-06-19	Change in identification of presently authorized equipment. Original FCC ID: PD97260NG Grant Date: 04/17/2013
hIJm51Jxw/IYwTjkMMp0+g==	2013-06-19	Change in identification of presently authorized equipment. Original FCC ID: PD97260NG Grant Date: 04/17/2013
NXUmvSxR34A5c5DBXeJucg==	2013-06-19	Change in identification of presently authorized equipment. Original FCC ID: PD97260NG Grant Date: 04/17/2013
FwSRT+WXVLHRqeGx8HTzPg==	2013-06-19	Change in identification of presently authorized equipment. Original FCC ID: PD97260NG Grant Date: 04/17/2013

Equipment Authorization

Frequency	Output	Rules	Grant Notes
		15B	CC
2402-2480 MHz	0.0050000	15C	CC
2402-2480 MHz	0.006	15C	CC, MO
2402-2480 MHz	0.006	15C	CC
2412-2462 MHz	0.316	15C	CC, MO
2422-2452 MHz	0.347	15C	CC, MO
5180-5240 MHz	0.036	15E	CC, MO
5190-5230 MHz	0.037	15E	CC, MO
5260-5320 MHz	0.038	15E	CC, MO
5260-5320 MHz	0.038	15E	CC, MO, ND
5500-5700 MHz	0.046	15E	CC, MO
5500-5700 MHz	0.046	15E	CC, MO, ND
5510-5670 MHz	0.046	15E	CC, MO
5510-5670 MHz	0.046	15E	CC, MO, ND
5530-5690 MHz	0.046	15E	CC, MO
5530-5690 MHz	0.046	15E	CC, MO, ND
5710 MHz	0.038	15E	CC, MO
5710 MHz	0.038	15E	CC, MO, ND
5720 MHz	0.036	15E	CC, MO
5720 MHz	0.036	15E	CC, MO, ND
5745-5825 MHz	0.355	15C	CC, MO
5755-5795 MHz	0.174	15C	CC, MO

Grants

TCB Grant - Application XyALKzSHAJyOWbndghzDkQ==

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 07/05/2013

Application Dated: 07/03/2013

Toshiba Corporation

Personal & Client Solutions Company

2-9, Suehiro-cho, Ome-shi

Tokyo 198-8710,
Japan

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.005

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR Simultaneous TX: 1.04 W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.

C2PC to install this module to a new host product and perform the SAR test as documented in this filing. SAR Simultaneous TX: 0.83 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application XyALKzSHAJyOWbndghzDkQ==

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Toshiba Corporation
Personal & Client Solutions Company 2-9, Suehiro-cho, Ome-shi
Tokyo 198-8710,
Japan

Date of Grant: 07/05/2013

Application Dated: 07/03/2013

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.005

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR Simultaneous TX: 1.04 W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.

C2PC to install this module to a new host product and perform the SAR test as documented in this filing. SAR Simultaneous TX: 0.83 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application VxHAQ7t//RahX+ZD8eblBQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 05/06/2014

Application Dated: 05/06/2014

Dynabook Inc.

6-15 Toyosu 5-chome, Koto-ku

Tokyo 135-8505,
Japan

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Dynabook Inc.

Equipment Class:	Digital Transmission System
Notes:	Wireless Network Adapter Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.006
CC MO	15C	2412.0 - 2462.0	0.316
CC MO	15C	2422.0 - 2452.0	0.347
CC MO	15C	5745.0 - 5825.0	0.355
CC MO	15C	5755.0 - 5795.0	0.174

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.77 W/kg. Simultaneous TX:1.04W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.

Class II Permissive Change to install this module in a specific notebook/tablet host with SAR documented in this filing. The highest reported SAR is 0.81 W/kg.

The highest reported SAR for all filings under this FCCID for stand-alone and simultaneous transmission exposure conditions are 0.81W/kg and 1.04 W/kg respectively.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application VxHAQ7t//RahX+ZD8eblBQ==

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc.
6-15 Toyosu 5-chome, Koto-ku
Tokyo 135-8505,
Japan

Date of Grant: 05/06/2014

Application Dated: 05/06/2014

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Dynabook Inc.

Equipment Class:	Digital Transmission System
Notes:	Wireless Network Adapter Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.006
CC MO	15C	2412.0 - 2462.0	0.316
CC MO	15C	2422.0 - 2452.0	0.347
CC MO	15C	5745.0 - 5825.0	0.355
CC MO	15C	5755.0 - 5795.0	0.174

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.77 W/kg. Simultaneous TX:1.04W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.

Class II Permissive Change to install this module in a specific notebook/tablet host with SAR documented in this filing. The highest reported SAR is 0.81 W/kg.

The highest reported SAR for all filings under this FCCID for stand-alone and simultaneous transmission exposure conditions are 0.81W/kg and 1.04 W/kg respectively.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application QBg/krxmw3yiG3P8Savn9Q==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 05/06/2014

Application Dated: 05/06/2014

Dynabook Inc.

6-15 Toyosu 5-chome, Koto-ku

Tokyo 135-8505,
Japan

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Dynabook Inc.

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless Network Adapter Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.036
CC MO	15E	5190.0 - 5230.0	0.037
CC MO	15E	5260.0 - 5320.0	0.038
CC MO	15E	5500.0 - 5700.0	0.046
CC MO	15E	5510.0 - 5670.0	0.046
CC MO	15E	5710.0 - 5710.0	0.038
CC MO	15E	5720.0 - 5720.0	0.036
CC MO	15E	5530.0 - 5690.0	0.046

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.83 W/kg. Simultaneous TX: 1.04W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.

Class II Permissive Change to install this module in a specific notebook/tablet host with SAR documented in this filing. The highest reported SAR is 0.90 W/kg.

The highest reported SAR for all filings under this FCCID for stand-alone and simultaneous transmission exposure conditions are 0.90W/kg and 1.04 W/kg respectively.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application QBg/krxmw3yiG3P8Savn9Q==

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc.
6-15 Toyosu 5-chome, Koto-ku
Tokyo 135-8505,
Japan

Date of Grant: 05/06/2014

Application Dated: 05/06/2014

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Dynabook Inc.

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless Network Adapter Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.036
CC MO	15E	5190.0 - 5230.0	0.037
CC MO	15E	5260.0 - 5320.0	0.038
CC MO	15E	5500.0 - 5700.0	0.046
CC MO	15E	5510.0 - 5670.0	0.046
CC MO	15E	5710.0 - 5710.0	0.038
CC MO	15E	5720.0 - 5720.0	0.036
CC MO	15E	5530.0 - 5690.0	0.046

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.83 W/kg. Simultaneous TX: 1.04W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.

Class II Permissive Change to install this module in a specific notebook/tablet host with SAR documented in this filing. The highest reported SAR is 0.90 W/kg.

The highest reported SAR for all filings under this FCCID for stand-alone and simultaneous transmission exposure conditions are 0.90W/kg and 1.04 W/kg respectively.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application o/yxvHrXrtzVuLmomn02xA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 06/19/2013

Application Dated: 06/18/2013

Toshiba Corporation

Personal & Client Solutions Company

2-9, Suehiro-cho, Ome-shi

Tokyo 198-8710,
Japan

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.005

Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR Simultaneous TX: 1.04W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.

CC:	This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application o/yxvHrXrtzVuLmomn02xA==

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Toshiba Corporation
Personal & Client Solutions Company 2-9, Suehiro-cho, Ome-shi
Tokyo 198-8710,
Japan

Date of Grant: 06/19/2013

Application Dated: 06/18/2013

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.005

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application NXUmvSxR34A5c5DBXeJucg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 06/19/2013

Application Dated: 06/17/2013

Toshiba Corporation

Personal & Client Solutions Company

2-9, Suehiro-cho, Ome-shi

Tokyo 198-8710,
Japan

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15B	-

CC:	This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application NXUmvSxR34A5c5DBXeJucg==

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Toshiba Corporation
Personal & Client Solutions Company 2-9, Suehiro-cho, Ome-shi
Tokyo 198-8710,
Japan

Date of Grant: 06/19/2013

Application Dated: 06/17/2013

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15B	-

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application lUtzLcng8N8QYQyNMUF+9Q==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 07/05/2013

Application Dated: 07/03/2013

Toshiba Corporation

Personal & Client Solutions Company

2-9, Suehiro-cho, Ome-shi

Tokyo 198-8710,
Japan

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Digital Transmission System
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.006
CC MO	15C	2412.0 - 2462.0	0.316
CC MO	15C	2422.0 - 2452.0	0.347
CC MO	15C	5745.0 - 5825.0	0.355
CC MO	15C	5755.0 - 5795.0	0.174

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is 0.77 W/kg. Simultaneous TX: 1.04 W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.

C2PC to install this module to a new host product and perform the SAR test as documented in this filing. The highest reported SAR is 0.64 W/kg. Simultaneous TX: 0.83 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application lUtzLcng8N8QYQyNMUF+9Q==

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Toshiba Corporation
Personal & Client Solutions Company 2-9, Suehiro-cho, Ome-shi
Tokyo 198-8710,
Japan

Date of Grant: 07/05/2013

Application Dated: 07/03/2013

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Digital Transmission System
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.006
CC MO	15C	2412.0 - 2462.0	0.316
CC MO	15C	2422.0 - 2452.0	0.347
CC MO	15C	5745.0 - 5825.0	0.355
CC MO	15C	5755.0 - 5795.0	0.174

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is 0.77 W/kg. Simultaneous TX: 1.04 W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.

C2PC to install this module to a new host product and perform the SAR test as documented in this filing. The highest reported SAR is 0.64 W/kg. Simultaneous TX: 0.83 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application jv63gVnfu83zpGECIjEEyw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 07/05/2013

Application Dated: 07/03/2013

Toshiba Corporation

Personal & Client Solutions Company

2-9, Suehiro-cho, Ome-shi

Tokyo 198-8710,
Japan

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.036
CC MO	15E	5190.0 - 5230.0	0.037
CC MO ND	15E	5260.0 - 5320.0	0.038
CC MO ND	15E	5500.0 - 5700.0	0.046
CC MO ND	15E	5510.0 - 5670.0	0.046
CC MO ND	15E	5710.0 - 5710.0	0.038
CC MO ND	15E	5720.0 - 5720.0	0.036
CC MO ND	15E	5530.0 - 5690.0	0.046

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is 0.83 W/kg. Simultaneous TX: 1.04 W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.

C2PC to install this module to a new host product and perform the SAR test as documented in this filing. The highest reported SAR is 0.67 W/kg. Simultaneous TX: 0.83 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application jv63gVnfu83zpGECIjEEyw==

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Toshiba Corporation
Personal & Client Solutions Company 2-9, Suehiro-cho, Ome-shi
Tokyo 198-8710,
Japan

Date of Grant: 07/05/2013

Application Dated: 07/03/2013

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.036
CC MO	15E	5190.0 - 5230.0	0.037
CC MO ND	15E	5260.0 - 5320.0	0.038
CC MO ND	15E	5500.0 - 5700.0	0.046
CC MO ND	15E	5510.0 - 5670.0	0.046
CC MO ND	15E	5710.0 - 5710.0	0.038
CC MO ND	15E	5720.0 - 5720.0	0.036
CC MO ND	15E	5530.0 - 5690.0	0.046

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

C2PC to install this module to a new host product and perform the SAR test as documented in this filing. The highest reported SAR is 0.67 W/kg. Simultaneous TX: 0.83 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application iA+ctJ0QVYxUoSnP/bTXng==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 07/05/2013

Application Dated: 07/03/2013

Toshiba Corporation

Personal & Client Solutions Company

2-9, Suehiro-cho, Ome-shi

Tokyo 198-8710,
Japan

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Wireless Network Adapter

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15B	-

C2PC to install this module to a new host product and perform the SAR test as documented in this filing.

CC:	This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application iA+ctJ0QVYxUoSnP/bTXng==

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Toshiba Corporation
Personal & Client Solutions Company 2-9, Suehiro-cho, Ome-shi
Tokyo 198-8710,
Japan

Date of Grant: 07/05/2013

Application Dated: 07/03/2013

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Wireless Network Adapter
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15B	-

C2PC to install this module to a new host product and perform the SAR test as documented in this filing.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application hIJm51Jxw/IYwTjkMMp0+g==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 06/19/2013

Application Dated: 06/18/2013

Toshiba Corporation

Personal & Client Solutions Company

2-9, Suehiro-cho, Ome-shi

Tokyo 198-8710,
Japan

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.036
CC MO	15E	5190.0 - 5230.0	0.037
CC MO ND	15E	5260.0 - 5320.0	0.038
CC MO ND	15E	5500.0 - 5700.0	0.046
CC MO ND	15E	5510.0 - 5670.0	0.046
CC MO ND	15E	5710.0 - 5710.0	0.038
CC MO ND	15E	5720.0 - 5720.0	0.036
CC MO ND	15E	5530.0 - 5690.0	0.046

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.83 W/kg. Simultaneous TX: 1.04W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application hIJm51Jxw/IYwTjkMMp0+g==

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Toshiba Corporation
Personal & Client Solutions Company 2-9, Suehiro-cho, Ome-shi
Tokyo 198-8710,
Japan

Date of Grant: 06/19/2013

Application Dated: 06/18/2013

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.036
CC MO	15E	5190.0 - 5230.0	0.037
CC MO ND	15E	5260.0 - 5320.0	0.038
CC MO ND	15E	5500.0 - 5700.0	0.046
CC MO ND	15E	5510.0 - 5670.0	0.046
CC MO ND	15E	5710.0 - 5710.0	0.038
CC MO ND	15E	5720.0 - 5720.0	0.036
CC MO ND	15E	5530.0 - 5690.0	0.046

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application FwSRT+WXVLHRqeGx8HTzPg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 06/19/2013

Application Dated: 06/18/2013

Toshiba Corporation

Personal & Client Solutions Company

2-9, Suehiro-cho, Ome-shi

Tokyo 198-8710,
Japan

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Digital Transmission System
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.006
CC MO	15C	2412.0 - 2462.0	0.316
CC MO	15C	2422.0 - 2452.0	0.347
CC MO	15C	5745.0 - 5825.0	0.355
CC MO	15C	5755.0 - 5795.0	0.174

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.77 W/kg. Simultaneous TX:1.04W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application FwSRT+WXVLHRqeGx8HTzPg==

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Toshiba Corporation
Personal & Client Solutions Company 2-9, Suehiro-cho, Ome-shi
Tokyo 198-8710,
Japan

Date of Grant: 06/19/2013

Application Dated: 06/18/2013

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Digital Transmission System
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.006
CC MO	15C	2412.0 - 2462.0	0.316
CC MO	15C	2422.0 - 2452.0	0.347
CC MO	15C	5745.0 - 5825.0	0.355
CC MO	15C	5755.0 - 5795.0	0.174

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application FtyaD2LwQzF8mjcNCiyFZA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 05/06/2014

Application Dated: 05/06/2014

Dynabook Inc.

6-15 Toyosu 5-chome, Koto-ku

Tokyo 135-8505,
Japan

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Dynabook Inc.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Wireless Network Adapter Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.005

Class II Permissive Change to install this module in a specific notebook/tablet host documented in this filing.

CC:	This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application FtyaD2LwQzF8mjcNCiyFZA==

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dynabook Inc.
6-15 Toyosu 5-chome, Koto-ku
Tokyo 135-8505,
Japan

Date of Grant: 05/06/2014

Application Dated: 05/06/2014

Attention: Toru Kawasaki , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Dynabook Inc.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Wireless Network Adapter Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.005

Class II Permissive Change to install this module in a specific notebook/tablet host documented in this filing.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application DLyCFW9+8vFLXcx6F7EzTg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 09/16/2013

Application Dated: 09/11/2013

Toshiba Corporation

Personal & Client Solutions Company

2-9, Suehiro-cho, Ome-shi

Tokyo 198-8710,
Japan

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.005

C2PC to install this module to a new host product and perform the SAR test as documented in this filing. SAR Simultaneous TX: 0.88 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application DLyCFW9+8vFLXcx6F7EzTg==

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Toshiba Corporation
Personal & Client Solutions Company 2-9, Suehiro-cho, Ome-shi
Tokyo 198-8710,
Japan

Date of Grant: 09/16/2013

Application Dated: 09/11/2013

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.005

C2PC to install this module to a new host product and perform the SAR test as documented in this filing. SAR Simultaneous TX: 0.88 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 6IX4EhAF5cXnVHNOmcO/Xg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 09/16/2013

Application Dated: 09/11/2013

Toshiba Corporation

Personal & Client Solutions Company

2-9, Suehiro-cho, Ome-shi

Tokyo 198-8710,
Japan

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15B	-

C2PC to install this module to a new host product and perform the SAR test as documented in this filing.

CC:	This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 6IX4EhAF5cXnVHNOmcO/Xg==

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Toshiba Corporation
Personal & Client Solutions Company 2-9, Suehiro-cho, Ome-shi
Tokyo 198-8710,
Japan

Date of Grant: 09/16/2013

Application Dated: 09/11/2013

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15B	-

C2PC to install this module to a new host product and perform the SAR test as documented in this filing.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 5oNAvObfcz3QQOxwg14FpA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 09/16/2013

Application Dated: 09/11/2013

Toshiba Corporation

Personal & Client Solutions Company

2-9, Suehiro-cho, Ome-shi

Tokyo 198-8710,
Japan

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.036
CC MO	15E	5190.0 - 5230.0	0.037
CC MO ND	15E	5260.0 - 5320.0	0.038
CC MO ND	15E	5500.0 - 5700.0	0.046
CC MO ND	15E	5510.0 - 5670.0	0.046
CC MO ND	15E	5710.0 - 5710.0	0.038
CC MO ND	15E	5720.0 - 5720.0	0.036
CC MO ND	15E	5530.0 - 5690.0	0.046

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.83 W/kg. Simultaneous TX: 1.04W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.

C2PC to install this module to a new host product and perform the SAR test as documented in this filing. The highest reported SAR is 0.79 W/kg. Simultaneous TX: 0.88 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 5oNAvObfcz3QQOxwg14FpA==

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Toshiba Corporation
Personal & Client Solutions Company 2-9, Suehiro-cho, Ome-shi
Tokyo 198-8710,
Japan

Date of Grant: 09/16/2013

Application Dated: 09/11/2013

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.036
CC MO	15E	5190.0 - 5230.0	0.037
CC MO ND	15E	5260.0 - 5320.0	0.038
CC MO ND	15E	5500.0 - 5700.0	0.046
CC MO ND	15E	5510.0 - 5670.0	0.046
CC MO ND	15E	5710.0 - 5710.0	0.038
CC MO ND	15E	5720.0 - 5720.0	0.036
CC MO ND	15E	5530.0 - 5690.0	0.046

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.83 W/kg. Simultaneous TX: 1.04W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.

C2PC to install this module to a new host product and perform the SAR test as documented in this filing. The highest reported SAR is 0.79 W/kg. Simultaneous TX: 0.88 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 34y75c+1V9IjnkSycLKJNw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 09/16/2013

Application Dated: 09/11/2013

Toshiba Corporation

Personal & Client Solutions Company

2-9, Suehiro-cho, Ome-shi

Tokyo 198-8710,
Japan

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Digital Transmission System
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.006
CC MO	15C	2412.0 - 2462.0	0.316
CC MO	15C	2422.0 - 2452.0	0.347
CC MO	15C	5745.0 - 5825.0	0.355
CC MO	15C	5755.0 - 5795.0	0.174

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.77 W/kg. Simultaneous TX:1.04W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.

C2PC to install this module to a new host product and perform the SAR test as documented in this filing. The highest reported SAR is 0.67 W/kg. Simultaneous TX: 0.88 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 34y75c+1V9IjnkSycLKJNw==

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Toshiba Corporation
Personal & Client Solutions Company 2-9, Suehiro-cho, Ome-shi
Tokyo 198-8710,
Japan

Date of Grant: 09/16/2013

Application Dated: 09/11/2013

Attention: Toru Kawasaki , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CJ6UPA5125WB

Name of Grantee:	Toshiba Corporation

Equipment Class:	Digital Transmission System
Notes:	Wireless Network Adapter
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.006
CC MO	15C	2412.0 - 2462.0	0.316
CC MO	15C	2422.0 - 2452.0	0.347
CC MO	15C	5745.0 - 5825.0	0.355
CC MO	15C	5755.0 - 5795.0	0.174

Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 5mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.77 W/kg. Simultaneous TX:1.04W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.

C2PC to install this module to a new host product and perform the SAR test as documented in this filing. The highest reported SAR is 0.67 W/kg. Simultaneous TX: 0.88 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: