FCC ID CKECMN851A
Wireless LAN Module
by Japan Radio Co., Ltd.
Grantee Code: CKE Product Code: CMN851A
Latest application date: 2019-01-20
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2019-01-20 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2019-01-20 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2016-06-23 |
| 5180-5320 MHz | Original Equipment | 2013-06-18 |
| 2412-2462 MHz | Original Equipment | 2013-06-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| (Short term Confidential) Users Manual | Users Manual | 2013-12-15 | PDF 187.4 KB |
| (Short term Confidential) Internal Photo | Internal Photos | 2013-12-15 | PDF 129.4 KB |
| 04 Short-Term Confidential_External Photo | External Photos | 2019-07-20 | PDF 594.9 KB |
| (Short term Confidential) External Photo | External Photos | 2013-12-15 | PDF 98.4 KB |
| Label & Location | ID Label/Location Info | 2013-06-18 | PDF 27.6 KB |
| 03 Short-Term Confidential_FCC Test Setup Photo_DTS | Test Setup Photos | 2019-07-20 | PDF 332 KB |
| 03 Short-Term Confidential_FCC Test Setup Photo_NII | Test Setup Photos | 2019-07-20 | PDF 321.5 KB |
| FCC Test Setup Photo_NII | Test Setup Photos | 2016-06-23 | PDF 815.9 KB |
| (Short term Confidential) FCC_Test setup photo(15C) | Test Setup Photos | 2013-12-15 | PDF 254.5 KB |
| (Short term Confidential) FCC_Test setup photo(15E) | Test Setup Photos | 2013-12-15 | PDF 718.4 KB |
| (Short term Confidential) FCC_Test setup photo(DFS) | Test Setup Photos | 2013-12-15 | PDF 267.8 KB |
| 03 FCC Test Report_DTS | Test Report | 2019-01-20 | PDF 1.5 MB |
| 03 FCC Test Report_NII | Test Report | 2019-01-20 | PDF 1.9 MB |
| FCC Test Report_NII | Test Report | 2016-06-23 | PDF 849 KB |
| FCC_Report(15C)_1 | Test Report | 2013-06-18 | PDF 1.7 MB |
| FCC_Report(15C)_2 | Test Report | 2013-06-18 | PDF 1.8 MB |
| FCC_Report(15E)_1 | Test Report | 2013-06-18 | PDF 1.7 MB |
| FCC_Report(15E)_2 | Test Report | 2013-06-18 | PDF 1.1 MB |
| FCC_Report(DFS) | Test Report | 2013-06-18 | PDF 376.1 KB |
| 02 FCC Authorization Letter | Cover Letter(s) | 2019-01-20 | PDF 35.1 KB |
| 02 FCC Class II Permissive Change Letter | Cover Letter(s) | 2019-01-20 | PDF 50.3 KB |
| 02 FCC Request for Confidentiality Letter | Cover Letter(s) | 2019-01-20 | PDF 30.3 KB |
| 02 FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2019-01-20 | PDF 31.8 KB |
| 02 FCC Special Power of Attorney | Cover Letter(s) | 2019-01-20 | PDF 165.9 KB |
| FCC Authorization Letter | Cover Letter(s) | 2016-06-23 | PDF 18.7 KB |
| FCC Class II Permissive Change Letter (FCC 14-30_Old rule or New rule) | Cover Letter(s) | 2016-06-23 | PDF 354 KB |
| FCC Request for Confidentiality Letter | Cover Letter(s) | 2016-06-23 | PDF 14.9 KB |
| FCC Special Power of Attorney | Cover Letter(s) | 2016-06-23 | PDF 109.8 KB |
| FCC Authorization Letter | Cover Letter(s) | 2013-06-18 | PDF 579.6 KB |
| FCC LMA letter | Cover Letter(s) | 2013-06-18 | PDF 856 KB |
| FCC Request for confidentiality letter | Cover Letter(s) | 2013-06-18 | PDF 530.4 KB |
| FCC Request for short-term confidentiality letter | Cover Letter(s) | 2013-06-18 | PDF 525.6 KB |
| FCC Special Power of Attorney | Cover Letter(s) | 2013-06-18 | PDF 409.3 KB |
| 03 FCC RF Exposure_DTS | RF Exposure Info | 2019-01-20 | PDF 16.1 KB |
| 03 FCC RF Exposure_NII | RF Exposure Info | 2019-01-20 | PDF 101.8 KB |
| FCC RF Exposure sheet_15C | RF Exposure Info | 2013-06-18 | PDF 53.8 KB |
| FCC RF Exposure sheet_15E | RF Exposure Info | 2013-06-18 | PDF 53.7 KB |
| (Confidential) Theory of Operation-Software Security Metadata only | Operational Description | PDF 21.1 KB | |
| 05 Confidential_Theory of Operation-Antenna List Metadata only | Operational Description | PDF 85.3 KB | |
| 05 Confidential_Theory of Operation-Antenna Specification Metadata only | Operational Description | PDF 984.7 KB |
Application Information
| Application ID | dzZ3fu1nS9SHtnNrDwyRuQ== |
|---|---|
| Final Action Date | 2019-01-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0028126522 |
| Model | CMN851A |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless LAN Module |
| Responsible Party | Yuji Kinoshita, General Manager, kinoshita.yuji@jrc.co.jp  , 1-408-217-9832 |
| Agent | Yoshihisa Yoshihisa Yoshihisa, UL Japan, Inc., Yoshihisa.Maeda@ul.com  , 81-596-24-8999 |
| Technical Contact | Hikaru Shirasawa, UL Japan, Inc., Hikaru.Shirasawa@ul.com , 81-463-50-6400 |
| Test Firm | Tetsuya Hashimoto, UL Japan, Inc. Shonan EMC EMC Lab., Tetsuya.Hashimoto@jp.ul.com  , +81-596-24-8116 |
| TCB Email | emc.jp@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 07/20/2019 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz and 40 MHz bandwidth mode. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| dzZ3fu1nS9SHtnNrDwyRuQ== | 2019-01-20 | Class II permissive change or modification of presently authorized equipment |
| 3fh7fLH/IvgwftcvkZq3dw== | 2019-01-20 | Class II permissive change or modification of presently authorized equipment |
| sz3sKq4YhkFUIiDPbu+A5w== | 2016-06-23 | Class II permissive change or modification of presently authorized equipment |
| X0Vxwvzx/YvUV9E371KAvQ== | 2013-06-18 | Original Equipment |
| SZGWqe7atGlW92Dump5GSw== | 2013-06-18 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2412-2462 MHz | 0.3238000 | 15C | CC, MO |
| 2412-2462 MHz | 0.3238 | 15C | CC, MO |
| 5180-5320 MHz | 0.0324 | 15E | CC, MO, ND |
| 5180-5320 MHz | 0.0324 | 15E | 38, CC, MO, ND |
| 5500-5700 MHz | 0.0218 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.0218 | 15E | 38, CC, MO, ND |
| 5745-5825 MHz | 0.2136 | 15C | CC, MO |
| 5745-5825 MHz | 0.0237 | 15E | CC, MO |
| 5745-5825 MHz | 0.0237 | 15E | 38, CC, MO |
Grants
TCB Grant - Application X0Vxwvzx/YvUV9E371KAvQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 06/18/2013 Application Dated: 06/18/2013 |
| Japan Radio Co Ltd. |
| 1011 SW Klickitat Way |
| Bldg. B Suite 201B |
| Seattle, WA 98134 |
| Attention: Ian Bowles |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CKECMN851A |
| Name of Grantee: | Japan Radio Co Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO ND | 15E | 5180.0 - 5320.0 | 0.0324 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.0218 |
| Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz and 40 MHz bandwidth mode. Operations in 5.15-5.25 GHz band are for indoor use only. This device complies with the Dynamic Frequency Selection (DFS) requirements as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application X0Vxwvzx/YvUV9E371KAvQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Japan Radio Co Ltd. 1011 SW Klickitat Way Bldg. B Suite 201B Seattle, WA 98134 United States |
Date of Grant: 06/18/2013 Application Dated: 06/18/2013 |
| Attention: Ian Bowles |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CKECMN851A |
| Name of Grantee: | Japan Radio Co Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO ND | 15E | 5180.0 - 5320.0 | 0.0324 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.0218 |
| Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz and 40 MHz bandwidth mode. Operations in 5.15-5.25 GHz band are for indoor use only. This device complies with the Dynamic Frequency Selection (DFS) requirements as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 06/18/2013 Application Dated: 06/18/2013 |
| Japan Radio Co Ltd. |
| 1011 SW Klickitat Way |
| Bldg. B Suite 201B |
| Seattle, WA 98134 |
| Attention: Ian Bowles |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CKECMN851A |
| Name of Grantee: | Japan Radio Co Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.3238 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.2136 |
| Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application SZGWqe7atGlW92Dump5GSw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Japan Radio Co Ltd. 1011 SW Klickitat Way Bldg. B Suite 201B Seattle, WA 98134 United States |
Date of Grant: 06/18/2013 Application Dated: 06/18/2013 |
| Attention: Ian Bowles |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CKECMN851A |
| Name of Grantee: | Japan Radio Co Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.3238 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.2136 |
| Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 06/23/2016 Application Dated: 06/23/2016 |
| Japan Radio Co., Ltd. |
| 3000 Scott Blvd, |
| Suite 212, |
| Santa Clara,, CA 95054 |
| Attention: Yuji Kinoshita , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CKECMN851A |
| Name of Grantee: | Japan Radio Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0324 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0218 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0237 |
| Class II Permissive Change based on FCC14-30. Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz and 40 MHz bandwidth mode. This device complies with the Dynamic Frequency Selection (DFS) requirements as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application sz3sKq4YhkFUIiDPbu+A5w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Japan Radio Co., Ltd. 3000 Scott Blvd, Suite 212, Santa Clara,, CA 95054 United States |
Date of Grant: 06/23/2016 Application Dated: 06/23/2016 |
| Attention: Yuji Kinoshita , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CKECMN851A |
| Name of Grantee: | Japan Radio Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0324 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0218 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0237 |
| Class II Permissive Change based on FCC14-30. Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz and 40 MHz bandwidth mode. This device complies with the Dynamic Frequency Selection (DFS) requirements as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 01/20/2019 Application Dated: 01/20/2019 |
| Japan Radio Co., Ltd. |
| 3000 Scott Blvd, |
| Suite 212, |
| Santa Clara,, CA 95054 |
| Attention: Yuji Kinoshita , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CKECMN851A |
| Name of Grantee: | Japan Radio Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.3238 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application dzZ3fu1nS9SHtnNrDwyRuQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Japan Radio Co., Ltd. 3000 Scott Blvd, Suite 212, Santa Clara,, CA 95054 United States |
Date of Grant: 01/20/2019 Application Dated: 01/20/2019 |
| Attention: Yuji Kinoshita , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CKECMN851A |
| Name of Grantee: | Japan Radio Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.3238 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 01/20/2019 Application Dated: 01/20/2019 |
| Japan Radio Co., Ltd. |
| 3000 Scott Blvd, |
| Suite 212, |
| Santa Clara,, CA 95054 |
| Attention: Yuji Kinoshita , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CKECMN851A |
| Name of Grantee: | Japan Radio Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO ND | 15E | 5180.0 - 5320.0 | 0.0324 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.0218 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0237 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz and 40 MHz bandwidth mode. This device complies with the Dynamic Frequency Selection (DFS) requirements as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 3fh7fLH/IvgwftcvkZq3dw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Japan Radio Co., Ltd. 3000 Scott Blvd, Suite 212, Santa Clara,, CA 95054 United States |
Date of Grant: 01/20/2019 Application Dated: 01/20/2019 |
| Attention: Yuji Kinoshita , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CKECMN851A |
| Name of Grantee: | Japan Radio Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO ND | 15E | 5180.0 - 5320.0 | 0.0324 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.0218 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0237 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz and 40 MHz bandwidth mode. This device complies with the Dynamic Frequency Selection (DFS) requirements as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |