FCC ID CNTWM3B2200BG

Laptop w/ Intel 802.11 BG Wireless LAN Adapter

by HP Inc.

Grantee Code: CNT   Product Code: WM3B2200BG
Latest application date: 2004-11-09

FCC ID Device Details

FCC IDCNTWM3B2200BG
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeCNT
Product CodeWM3B2200BG
Applicant BusinessHP Inc. 🇺🇸
Related Domains hp.com
Equipment ClassLaptop w/ Intel 802.11 BG Wireless LAN Adapter
Test FirmCompatible Electronics

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2004-11-09
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2004-07-08
2412-2462 MHzOriginal Equipment2004-01-26

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2004-11-09PDF 490.1 KB
Regulatory guide informationUsers Manual2004-11-09PDF 292.8 KB
Revised users manualUsers Manual2004-11-09PDF 658.1 KB
ManualUsers Manual2004-07-08PDF 310 KB
Manual 1Users Manual2004-07-08PDF 780.3 KB
Manual 2Users Manual2004-07-08PDF 1.5 MB
Manual 3Users Manual2004-07-08PDF 1.6 MB
Manual 4Users Manual2004-07-08PDF 1.2 MB
Manual 5Users Manual2004-07-08PDF 1.4 MB
Manual 6Users Manual2004-07-08PDF 728.8 KB
Manual lopez 1Users Manual2004-01-26PDF 780.3 KB
Manual lopez 2Users Manual2004-01-26PDF 1.5 MB
Manual lopez 3Users Manual2004-01-26PDF 1.6 MB
Manual lopez 4Users Manual2004-01-26PDF 1.2 MB
Manual lopez 5Users Manual2004-01-26PDF 1.4 MB
Manual lopez 6Users Manual2004-01-26PDF 728.8 KB
Manual lopez regUsers Manual2004-01-26PDF 310 KB
Manual raptor 1Users Manual2004-01-26PDF 624.8 KB
Manual raptor 2Users Manual2004-01-26PDF 519.5 KB
Manual raptor 3Users Manual2004-01-26PDF 697.3 KB
Manual raptor regUsers Manual2004-01-26PDF 158.4 KB
Regulatory statementsUsers Manual2004-01-26PDF 660.6 KB
Internal photosInternal Photos2004-11-09PDF 1.2 MB
Internal photos antenna locationInternal Photos2004-11-09PDF 225.9 KB
Internal photosInternal Photos2004-07-08PDF 1.1 MB
Internal photosInternal Photos2004-01-26PDF 1,004 KB
External photosExternal Photos2004-11-09PDF 1 MB
External photosExternal Photos2004-07-08PDF 658.6 KB
External photosExternal Photos2004-01-26PDF 439.6 KB
FCC ID BT label infoID Label/Location Info2004-07-08PDF 253.3 KB
FCC ID label locationID Label/Location Info2004-07-08PDF 983.3 KB
Bluetooth label supporting label infoID Label/Location Info2004-01-26PDF 253.3 KB
FCC ID label info 1ID Label/Location Info2004-01-26PDF 279.5 KB
FCC ID label info 2ID Label/Location Info2004-01-26PDF 923.8 KB
FCC ID label info 4ID Label/Location Info2004-01-26PDF 375.4 KB
FCCNID label info 3ID Label/Location Info2004-01-26PDF 2 MB
Test setup photosTest Setup Photos2004-11-09PDF 542 KB
Set up photosTest Setup Photos2004-07-08PDF 555.9 KB
Setup photos PP2080Test Setup Photos2004-01-26PDF 853.3 KB
Setup photos PP3006Test Setup Photos2004-01-26PDF 643.2 KB
Test report 1Test Report2004-11-09PDF 1.3 MB
Test report appendixTest Report2004-11-09PDF 161.5 KB
Test report revisedTest Report2004-07-08PDF 1.9 MB
Supporting BT reportTest Report2004-01-26PDF 2.6 MB
Test Report 1 revisedTest Report2004-01-26PDF 1.9 MB
Test report 2 revisedTest Report2004-01-26PDF 1.9 MB
ATCB commentsCover Letter(s)2004-11-09PDF 28.6 KB
Reason for PC2Cover Letter(s)2004-11-09PDF 99.1 KB
Reply to ATCBCover Letter(s)2004-11-09PDF 31.5 KB
Request for confidentialityCover Letter(s)2004-11-09PDF 31.7 KB
ATCB initial commentsCover Letter(s)2004-07-08PDF 17.5 KB
ATCB supplemental commentsCover Letter(s)2004-07-08PDF 19.7 KB
Cover letterCover Letter(s)2004-07-08PDF 103.2 KB
Request for cnfidentialityCover Letter(s)2004-07-08PDF 96 KB
ATCB commentsCover Letter(s)2004-01-26PDF 26.9 KB
Cover letterCover Letter(s)2004-01-26PDF 32.2 KB
POACover Letter(s)2004-01-26PDF 218.9 KB
Request for confidentialityCover Letter(s)2004-01-26PDF 261.2 KB
Response to ATCBCover Letter(s)2004-01-26PDF 48.8 KB
Revised SAR report 1RF Exposure Info2004-11-09PDF 1.6 MB
SAR report 2RF Exposure Info2004-11-09PDF 1.6 MB
SAR revised 1RF Exposure Info2004-07-08PDF 2 MB
SAR revised 2RF Exposure Info2004-07-08PDF 723.8 KB
SAR PP2080RF Exposure Info2004-01-26PDF 2.8 MB
SAR PP3006RF Exposure Info2004-01-26PDF 2.9 MB
Block diagram Metadata onlyBlock DiagramPDF 103.1 KB
Block diagram Metadata onlyBlock DiagramPDF 102.2 KB
Schematics Metadata onlySchematicsPDF 1,008.9 KB
Schematics Metadata onlySchematicsPDF 1,008.9 KB
Theory of operation Metadata onlyOperational DescriptionPDF 216.6 KB

Application Information

Application IDO9iTFYKTAOVZKfcmloqAFQ==
Final Action Date2004-11-09
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0010188456
ModelWM3B2200BG
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionLaptop w/ Intel 802.11 BG Wireless LAN Adapter
Responsible PartyRichard P Tarsio, US Canada Technical Regulations, richard.tarsio@hp.com , 970-898-1211
AgentKyle Kyle Kyle, Compatible Electronics, Inc., kyle@celectronics.com , 714 579 0500
Technical ContactKyle Fujimoto, Compatible Electronics, Inc, kyle@celectronics.com , 714 579 0500
Test FirmScott McCutchan, Compatible Electronics, 714-579-0500
TCB Emailhotline@americantcb.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is Conducted. The Mini-PCI Card is to be installed in the specific notebook computers shown in this filing only by the grantee or their designated OEM integrator - user installation is prohibited. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for spurious emissions, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. Co-located transmitter operating conditions have been evaluated as described in this filing. The antenna(s) used for this transmitter must not be co-located or operate in conjunction with any other antenna or transmitter other than the configurations evaluated as described in this filing. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The higest SAR values reported are: HP model PP2080 Body;0.31w/kg: HP model PP3006 Body; 0.86w/kg: HP platform HSTNN-Q09C Body; 0.72w/kg: HP-Heavenly-BG-5062 platform is 0.53 W/kg.

Applications

Application IDDatePurpose
O9iTFYKTAOVZKfcmloqAFQ==2004-11-09Class II permissive change or modification of presently authorized equipment
2fvqmSW1/+DCwUOLh046rQ==2004-07-08Class II permissive change or modification of presently authorized equipment
ohLIYy/pvk+utdhIi8+9/g==2004-01-26Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.056000015CCE
2412-2462 MHz0.058000015C

Grants

TCB Grant - Application ohLIYy/pvk+utdhIi8+9/g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 01/26/2004

Application Dated: 01/26/2004
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CNTWM3B2200BG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Laptop with WLAN and Bluetooth
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.056  

Power Output listed is conducted. The SAR data in this filing is applicable to demonstrate compliance for the final host products only as shown in this filing. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The higest SAR values reported are: HP model PP2080 Body; 0.31w/kg: HP model PP3006 Body; 0.86w/kg.

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application ohLIYy/pvk+utdhIi8+9/g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 01/26/2004

Application Dated: 01/26/2004
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CNTWM3B2200BG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Laptop with WLAN and Bluetooth
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.056  

Power Output listed is conducted. The SAR data in this filing is applicable to demonstrate compliance for the final host products only as shown in this filing. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The higest SAR values reported are: HP model PP2080 Body; 0.31w/kg: HP model PP3006 Body; 0.86w/kg.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application O9iTFYKTAOVZKfcmloqAFQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/09/2004

Application Dated: 11/09/2004
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CNTWM3B2200BG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Laptop w/ Intel 802.11 BG Wireless LAN Adapter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.058  

Output power is Conducted. The Mini-PCI Card is to be installed in the specific notebook computers shown in this filing only by the grantee or their designated OEM integrator - user installation is prohibited. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for spurious emissions, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. Co-located transmitter operating conditions have been evaluated as described in this filing. The antenna(s) used for this transmitter must not be co-located or operate in conjunction with any other antenna or transmitter other than the configurations evaluated as described in this filing. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The higest SAR values reported are: HP model PP2080 Body;0.31w/kg: HP model PP3006 Body; 0.86w/kg: HP platform HSTNN-Q09C Body; 0.72w/kg: HP-Heavenly-BG-5062 platform is 0.53 W/kg.

EAS Grant - Application O9iTFYKTAOVZKfcmloqAFQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 11/09/2004

Application Dated: 11/09/2004
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CNTWM3B2200BG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Laptop w/ Intel 802.11 BG Wireless LAN Adapter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.058  

Output power is Conducted. The Mini-PCI Card is to be installed in the specific notebook computers shown in this filing only by the grantee or their designated OEM integrator - user installation is prohibited. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for spurious emissions, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. Co-located transmitter operating conditions have been evaluated as described in this filing. The antenna(s) used for this transmitter must not be co-located or operate in conjunction with any other antenna or transmitter other than the configurations evaluated as described in this filing. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The higest SAR values reported are: HP model PP2080 Body;0.31w/kg: HP model PP3006 Body; 0.86w/kg: HP platform HSTNN-Q09C Body; 0.72w/kg: HP-Heavenly-BG-5062 platform is 0.53 W/kg.



TCB Grant - Application 2fvqmSW1/+DCwUOLh046rQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/08/2004

Application Dated: 07/08/2004
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CNTWM3B2200BG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Laptop with WLAN and Bluetooth
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.056  

demonstrate compliance for the final host products only as shown in this filing. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The higest SAR values reported are: HP model PP2080 Body; 0.31w/kg: HP model PP3006 Body; 0.86w/kg: HP platform HSTNN-Q09C Body; 0.72w/kg.

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application 2fvqmSW1/+DCwUOLh046rQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 07/08/2004

Application Dated: 07/08/2004
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CNTWM3B2200BG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Laptop with WLAN and Bluetooth
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.056  

demonstrate compliance for the final host products only as shown in this filing. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The higest SAR values reported are: HP model PP2080 Body; 0.31w/kg: HP model PP3006 Body; 0.86w/kg: HP platform HSTNN-Q09C Body; 0.72w/kg.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: