FCC ID CNTWM3B2915ABG

Intel Mini PCI Type 802.11ABG WLAN Adapter

by HP Inc.

Grantee Code: CNT   Product Code: WM3B2915ABG
Latest application date: 2006-12-18

FCC ID Device Details

FCC IDCNTWM3B2915ABG
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeCNT
Product CodeWM3B2915ABG
Applicant BusinessHP Inc. 🇺🇸
Related Domains hp.com
Equipment ClassIntel Mini PCI Type 802.11ABG WLAN Adapter
Test FirmCompliance Certification Services

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2006-12-18
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-10-28
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2005-10-28
2412-2462 MHzOriginal Equipment2004-12-20
5180-5240 MHzOriginal Equipment2004-12-20

Exhibits

DocumentTypeAvailableFile
User Manual 1Users Manual2005-10-28PDF 587 KB
User Manual 2Users Manual2005-10-28PDF 920.1 KB
User Manual 3Users Manual2005-10-28PDF 544.1 KB
User Manual 4Users Manual2005-10-28PDF 831.7 KB
Full Onwnes Manual Part 5Users Manual2004-12-20PDF 3 MB
Full Owners Manual Part 1Users Manual2004-12-20PDF 3.5 MB
Full Owners Manual Part 2Users Manual2004-12-20PDF 3.4 MB
Full Owners Manual Part 3Users Manual2004-12-20PDF 3.7 MB
Full Owners Manual Part 4Users Manual2004-12-20PDF 3.1 MB
Full Owners Manual Part 5Users Manual2004-12-20PDF 3 MB
HP Raptor Manual 1Users Manual2004-12-20PDF 625.7 KB
HP Raptor Manual 2Users Manual2004-12-20PDF 520.4 KB
HP Raptor Manual 3Users Manual2004-12-20PDF 698.2 KB
HP Raptor Manual Part 1Users Manual2004-12-20PDF 625.7 KB
HP Raptor Manual Part 2Users Manual2004-12-20PDF 520.4 KB
HP Raptor Manual Part 3Users Manual2004-12-20PDF 698.2 KB
HP Raptor Reg NoticesUsers Manual2004-12-20PDF 159.3 KB
HP Raptor Regulatory NoticesUsers Manual2004-12-20PDF 159.3 KB
Onwers Manual for Platform SI1Users Manual2004-12-20PDF 490.1 KB
Users Manual for SI1Users Manual2004-12-20PDF 490.1 KB
WM3B29151ABG Owners Manual Part 1Users Manual2004-12-20PDF 1.3 MB
WM3B2915ABG Owners Manual 1Users Manual2004-12-20PDF 1.3 MB
WM3B2915ABG Owners Manual 2Users Manual2004-12-20PDF 2.7 MB
WM3B2915ABG Owners Manual Part 2Users Manual2004-12-20PDF 2.7 MB
Internal PhotosInternal Photos2004-12-20PDF 503 KB
Internal Photos for SI1Internal Photos2004-12-20PDF 656.8 KB
Internal Photos for platform SI1Internal Photos2004-12-20PDF 656.8 KB
External PhotosExternal Photos2004-12-20PDF 691.9 KB
External Photos for SI1External Photos2004-12-20PDF 961.2 KB
External Photos for platform SI1External Photos2004-12-20PDF 961.2 KB
FCC ID LabelID Label/Location Info2005-10-28PDF 1,011 KB
FCC ID Label and LocationID Label/Location Info2004-12-20PDF 1.5 MB
Label Location for Platform SI1ID Label/Location Info2004-12-20PDF 1 MB
Test Setup PhotosTest Setup Photos2006-12-18PDF 208.9 KB
Test Setup PhotosTest Setup Photos2004-12-20PDF 358.9 KB
Test Setup Photos for SI1Test Setup Photos2004-12-20PDF 444.2 KB
Test Setup Photos for platform SI1Test Setup Photos2004-12-20PDF 444.2 KB
Test ReportTest Report2006-12-18PDF 780.6 KB
Colocation statementTest Report2004-12-20PDF 3.5 KB
DTS Test Report for platform SI1Test Report2004-12-20PDF 1.5 MB
SAR Test Report 1RF Exposure Info2004-12-20PDF 1.9 MB
SAR Test Report 2RF Exposure Info2004-12-20PDF 1.9 MB
SAR Test Report 3RF Exposure Info2004-12-20PDF 1.2 MB
SAR Test Report 4RF Exposure Info2004-12-20PDF 530.7 KB
SAR Test Report Part 1RF Exposure Info2004-12-20PDF 1.9 MB
SAR Test Report Part 1 for SI1RF Exposure Info2004-12-20PDF 3.7 MB
SAR Test Report Part 2RF Exposure Info2004-12-20PDF 1.9 MB
SAR Test Report Part 2 for SI1RF Exposure Info2004-12-20PDF 2.6 MB
SAR Test Report Part 3RF Exposure Info2004-12-20PDF 1.2 MB
SAR Test Report Part 4RF Exposure Info2004-12-20PDF 530.7 KB
Test Report Body for DTSTest Report2004-12-20PDF 1.6 MB
Test Report Body for UNIITest Report2004-12-20PDF 1.3 MB
Test Report Data for DTSTest Report2004-12-20PDF 1.9 MB
Test Report Data for UNIITest Report2004-12-20PDF 667.1 KB
UNII Appenidx E for platform SI1Test Report2004-12-20PDF 492.5 KB
UNII Test Report Body for platform SI1Test Report2004-12-20PDF 492.5 KB
Attestation DFSAttestation Statements2006-12-18PDF 240 KB
Attestation StatementAttestation Statements2006-12-18PDF 41.3 KB
Authorization LetterCover Letter(s)2006-12-18PDF 43.1 KB
Permissive Change LetterCover Letter(s)2006-12-18PDF 91.3 KB
Class II Permissive Change LetterCover Letter(s)2005-10-28PDF 44.1 KB
Confidentiality LetterCover Letter(s)2004-12-20PDF 489.9 KB
Cover LetterCover Letter(s)2004-12-20PDF 272.1 KB
Cover LetterCover Letter(s)2004-12-20PDF 98.3 KB
Letter of AuthorityCover Letter(s)2004-12-20PDF 272.1 KB
Modular Approval InfoCover Letter(s)2004-12-20PDF 281.1 KB
Modular Approval LetterCover Letter(s)2004-12-20PDF 281.1 KB
Antennan 1Parts List/Tune Up Info2005-10-28PDF 289.8 KB
Antennan 2Parts List/Tune Up Info2005-10-28PDF 1.7 MB
MPERF Exposure Info2005-10-28PDF 109 KB
Antenna InformationParts List/Tune Up Info2004-12-20PDF 1.4 MB
Antenna Information for Platform SI1Parts List/Tune Up Info2004-12-20PDF 225.9 KB
Antenna Information for SI1Parts List/Tune Up Info2004-12-20PDF 225.9 KB
Antenna Location for SI1Parts List/Tune Up Info2004-12-20PDF 225.9 KB
SAR ReponsesRF Exposure Info2004-12-20PDF 77.3 KB
SAR ResponsesRF Exposure Info2004-12-20PDF 77.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 16.7 KB
Schematics Metadata onlySchematicsPDF 988 KB
Theory of Operation Metadata onlyOperational DescriptionPDF 116.9 KB
Theory of Operation for SI1 Metadata onlyOperational DescriptionPDF 116.9 KB

Application Information

Application IDbmUyWot+s6prnbA3nIb+Zw==
Final Action Date2006-12-18
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0010188456
ModelWM3B2915ABG
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionIntel Mini PCI Type 802.11ABG WLAN Adapter
Responsible PartyRichard P Tarsio, US Canada Technical Regulations, richard.tarsio@hp.com , 970-898-1211
Technical ContactMichael Heckrotte, Compliance Certification Services, Michael.Heckrotte@ccsemc.com , 408-463-0885
Test FirmBarbara Judge, Compliance Certification Services, bjudge@ccsemc.com , 510-771-1104
TCB EmailHotline@atcb.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is conducted. This 15.247 & 15.407 composite device is restricted to indoor use only for 5.15-5.25 GHz, per 15.407(e). This module is approved for use in mobile only configurations, and portable configurations evaluated in filings under this FCC ID. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module may not be provided to the end user. In mobile RF exposure conditions the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, other than specific configurations evaluated in filings under this FCC ID. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. SAR was evaluated in two specific host product configurations with antenna versions as described in this composite filing. The highest reported body SAR values are: 2.4 GHz-band 1.3 W/kg; 5.2 GHz-band1.29 W/kg; 5.8 GHz-band 1.41 W/kg. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.

Applications

Application IDDatePurpose
bmUyWot+s6prnbA3nIb+Zw==2006-12-18Class II permissive change or modification of presently authorized equipment
p1xPc2dUutptQEi7pyx7dg==2005-10-28Class II permissive change or modification of presently authorized equipment
BK3aBW16dXzHGEhDG4gFEw==2005-10-28Class II permissive change or modification of presently authorized equipment
TL/wNkaiGx6I4AvV3iDd6w==2004-12-20Original Equipment
4dVJcuSQsA/i0UIxKBBuzQ==2004-12-20Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.25882115CCC
2412-2462 MHz0.25882115C
5180-5240 MHz0.04764315E
5180-5240 MHz0.04764315ECC
5260-5320 MHz0.13031715E
5260-5320 MHz0.13031715ECC
5745-5825 MHz0.11015415CCC
5745-5825 MHz0.11015415C

Grants

TCB Grant - Application TL/wNkaiGx6I4AvV3iDd6w==

This application does not exist.

EAS Grant - Application TL/wNkaiGx6I4AvV3iDd6w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 12/20/2004

Application Dated: 09/23/2004
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CNTWM3B2915ABG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Intel Mini PCI Type 802.11ABG WLAN Adapter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.258821  
15C 5745.0  -  5825.0 0.110154  

Output power is conducted. This 15.247 & 15.407 composite device is restricted to indoor use only for 5.15-5.25 GHz, per 15.407(e). This module is approved for use in mobile only configurations, and portable configurations evaluated in filings under this FCC ID. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module may not be provided to the end user. In mobile RF exposure conditions the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, other than specific configurations evaluated in filings under this FCC ID. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. SAR was evaluated in two specific host product configurations with antenna versions as described in this composite filing. The highest reported body SAR values are: 2.4 GHz-band 1.3 W/kg; 5.2 GHz-band 1.29 W/kg; 5.8 GHz-band 1.41 W/kg.



TCB Grant - Application p1xPc2dUutptQEi7pyx7dg==

Mail To:
Kyle Fujimoto,
Compatible Electronics
114 Olinda Drive
Brea, CA 92823
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 10/28/2005

Application Dated: 10/28/2005
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CNTWM3B2915ABG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Intel Mini PCI Type 802.11ABG WLAN Adapter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.258821  
CC 15C 5745.0  -  5825.0 0.110154  

In this Class II permissive change filing, alternate PIFA antennas are added to the module and co-located with specific WWAN module as documented in the filing. WLAN and WWAN modules and their antennas must be installed in the specific location as documented to comply with section 2.1091 in term of RF exposure condition. Output power is conducted. This 15.247 & 15.407 composite device is restricted to indoor use only for 5.15-5.25 GHz, per 15.407(e). This module is approved for use in mobile only configurations, and portable configurations evaluated in filings under this FCC ID. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module may not be provided to the end user. In mobile RF exposure conditions the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, other than specific configurations evaluated in filings under this FCC ID. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. SAR was evaluated in two specific host product configurations with antenna versions as described in this composite filing. The highest reported body SAR values are: 2.4 GHz-band 1.3 W/kg; 5.2 GHz-band 1.29 W/kg; 5.8 GHz-band 1.41 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application p1xPc2dUutptQEi7pyx7dg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 10/28/2005

Application Dated: 10/28/2005
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CNTWM3B2915ABG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Intel Mini PCI Type 802.11ABG WLAN Adapter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.258821  
CC 15C 5745.0  -  5825.0 0.110154  

In this Class II permissive change filing, alternate PIFA antennas are added to the module and co-located with specific WWAN module as documented in the filing. WLAN and WWAN modules and their antennas must be installed in the specific location as documented to comply with section 2.1091 in term of RF exposure condition. Output power is conducted. This 15.247 & 15.407 composite device is restricted to indoor use only for 5.15-5.25 GHz, per 15.407(e). This module is approved for use in mobile only configurations, and portable configurations evaluated in filings under this FCC ID. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module may not be provided to the end user. In mobile RF exposure conditions the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, other than specific configurations evaluated in filings under this FCC ID. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. SAR was evaluated in two specific host product configurations with antenna versions as described in this composite filing. The highest reported body SAR values are: 2.4 GHz-band 1.3 W/kg; 5.2 GHz-band 1.29 W/kg; 5.8 GHz-band 1.41 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application bmUyWot+s6prnbA3nIb+Zw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/18/2006

Application Dated: 12/18/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CNTWM3B2915ABG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Mini PCI Type 802.11ABG WLAN Adapter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.047643  
15E 5260.0  -  5320.0 0.130317  

Output power is conducted. This 15.247 & 15.407 composite device is restricted to indoor use only for 5.15-5.25 GHz, per 15.407(e). This module is approved for use in mobile only configurations, and portable configurations evaluated in filings under this FCC ID. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module may not be provided to the end user. In mobile RF exposure conditions the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, other than specific configurations evaluated in filings under this FCC ID. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. SAR was evaluated in two specific host product configurations with antenna versions as described in this composite filing. The highest reported body SAR values are: 2.4 GHz-band 1.3 W/kg; 5.2 GHz-band1.29 W/kg; 5.8 GHz-band 1.41 W/kg.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


EAS Grant - Application bmUyWot+s6prnbA3nIb+Zw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 12/18/2006

Application Dated: 12/18/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CNTWM3B2915ABG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Mini PCI Type 802.11ABG WLAN Adapter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.047643  
15E 5260.0  -  5320.0 0.130317  

Output power is conducted. This 15.247 & 15.407 composite device is restricted to indoor use only for 5.15-5.25 GHz, per 15.407(e). This module is approved for use in mobile only configurations, and portable configurations evaluated in filings under this FCC ID. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module may not be provided to the end user. In mobile RF exposure conditions the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, other than specific configurations evaluated in filings under this FCC ID. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. SAR was evaluated in two specific host product configurations with antenna versions as described in this composite filing. The highest reported body SAR values are: 2.4 GHz-band 1.3 W/kg; 5.2 GHz-band1.29 W/kg; 5.8 GHz-band 1.41 W/kg.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.



TCB Grant - Application BK3aBW16dXzHGEhDG4gFEw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 10/28/2005

Application Dated: 10/28/2005
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CNTWM3B2915ABG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Mini PCI Type 802.11ABG WLAN Adapter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.047643  
CC 15E 5260.0  -  5320.0 0.130317  

In this Class II permissive change filing, alternate PIFA antennas are added to the module and co-located with specific WWAN module as documented in the filing. WLAN and WWAN modules and their antennas must be installed in the specific location as documented to comply with section 2.1091 in term of RF exposure condition. Output power is conducted. This 15.247 & 15.407 composite device is restricted to indoor use only for 5.15-5.25 GHz, per 15.407(e). This module is approved for use in mobile only configurations, and portable configurations evaluated in filings under this FCC ID. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module may not be provided to the end user. In mobile RF exposure conditions the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, other than specific configurations evaluated in filings under this FCC ID. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. SAR was evaluated in two specific host product configurations with antenna versions as described in this composite filing. The highest reported body SAR values are: 2.4 GHz-band 1.3 W/kg; 5.2 GHz-band 1.29 W/kg; 5.8 GHz-band 1.41 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application BK3aBW16dXzHGEhDG4gFEw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 10/28/2005

Application Dated: 10/28/2005
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CNTWM3B2915ABG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Mini PCI Type 802.11ABG WLAN Adapter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.047643  
CC 15E 5260.0  -  5320.0 0.130317  

In this Class II permissive change filing, alternate PIFA antennas are added to the module and co-located with specific WWAN module as documented in the filing. WLAN and WWAN modules and their antennas must be installed in the specific location as documented to comply with section 2.1091 in term of RF exposure condition. Output power is conducted. This 15.247 & 15.407 composite device is restricted to indoor use only for 5.15-5.25 GHz, per 15.407(e). This module is approved for use in mobile only configurations, and portable configurations evaluated in filings under this FCC ID. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module may not be provided to the end user. In mobile RF exposure conditions the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, other than specific configurations evaluated in filings under this FCC ID. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. SAR was evaluated in two specific host product configurations with antenna versions as described in this composite filing. The highest reported body SAR values are: 2.4 GHz-band 1.3 W/kg; 5.2 GHz-band 1.29 W/kg; 5.8 GHz-band 1.41 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 4dVJcuSQsA/i0UIxKBBuzQ==

This application does not exist.

EAS Grant - Application 4dVJcuSQsA/i0UIxKBBuzQ==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 12/20/2004

Application Dated: 09/23/2004
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  CNTWM3B2915ABG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Mini PCI Type 802.11ABG WLAN Adapter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.047643  
15E 5260.0  -  5320.0 0.130317  

Output power is conducted. This 15.247 & 15.407 composite device is restricted to indoor use only for 5.15-5.25 GHz, per 15.407(e). This module is approved for use in mobile only configurations, and portable configurations evaluated in filings under this FCC ID. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module may not be provided to the end user. In mobile RF exposure conditions the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, other than specific configurations evaluated in filings under this FCC ID. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. SAR was evaluated in two specific host product configurations with antenna versions as described in this composite filing. The highest reported body SAR values are: 2.4 GHz-band 1.3 W/kg; 5.2 GHz-band 1.29 W/kg; 5.8 GHz-band 1.41 W/kg.



Mail To:
Michael Christensen, Lab Manager
Compatible Electronics
114 Olinda Drive
Brea, CA 92823