WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.

Universal Global Scientific Industrial Co., Ltd. 802.11a/b/g/n + BT Wireless LAN Module

Page 1 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 2 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 3 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 4 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 5 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 6 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 7 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 8 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 9 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 10 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 11 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 12 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 13 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 14 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 15 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 16 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 17 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 18 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 19 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 20 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 21 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 22 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 23 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 24 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 25 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 26 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 27 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 28 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 29 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 30 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 31 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 32 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 33 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 34 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 35 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 36 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 37 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 38 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 39 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 40 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 41 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 42 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 43 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 44 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 45 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 46 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 47 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 48 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 49 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 50 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Page 51 of WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.

Report No. : EN/2018/30013
Page : 1 of 51
SAR TEST REPORT
The following samples were submitted and identified on behalf of the client as:
Product Name
Brand Name
Model No.
Company Name
Company Address
Digital Camera
FUJIFILM
FF180003
UNIVERSAL GLOBAL SCIENTIFIC INDUSTRIAL CO.,
LTD.
141, Lane 351, Sec. 1, Taiping Road., Tsaotuen, Nantou
54261, Taiwan
Standards
IEEE/ANSI C95.1-1992, IEEE 1528-2013,
KDB248227D01v02r02,KDB865664D01v01r04,
KDB865664D02v01r02,KDB447498D01v06,
FCC ID
COF-WMBNBM26A
Date of Receipt
Mar. 28, 2018
Date of Test(s)
Apr. 03, 2018
Date of Issue
May. 23, 2018
In the configuration tested, the EUT complied with the standards specified above.
Remarks:
This report details the results of the testing carried out on one sample, the results contained in this test
report do not relate to other samples of the same product. The manufacturer should ensure that all products in
series production are in conformity with the product sample detailed in this report.
This report may only be reproduced and distributed in full. If the product in this report is used in any
configuration other than that detailed in the report, the manufacturer must ensure the new system complies
with all relevant standards. Any mention of SGS Taiwan Electronic & Communication Laboratory or testing
done by SGS Taiwan Electronic & Communication Laboratory in connection with distribution or use of the
product described in this report must be approved by SGS Taiwan Electronic & Communication Laboratory in
writing.
Signed on behalf of SGS
Clerk / Ruby Ou
Asst. Supervisor / Afu Chen Asst. Manager / John Yeh
Date: May. 23, 2018
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 2 of 51
Revision History
Report Number
Revision
Description
Issue Date
EN/2018/30013
Rev.00
Initial creation of document
May. 23, 2018
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 3 of 51
Contents
1. General Information ....................................................................................................... 4
1.1 Testing Laboratory ............................................................................................................... 4
1.2 Details of Applicant.............................................................................................................. 4
1.3 Details of Manufacturer ....................................................................................................... 4
1.4 Description of EUT .............................................................................................................. 5
1.5 Test Environment ................................................................................................................ 7
1.6 Operation Description ......................................................................................................... 7
1.7 The SAR Measurement System ........................................................................................ 10
1.8 System Components ......................................................................................................... 12
1.9 SAR System Verification ................................................................................................... 14
1.10 Tissue Simulant Fluid for the Frequency Band ............................................................... 15
1.11 Evaluation Procedures .................................................................................................... 16
1.12 Probe Calibration Procedures ......................................................................................... 17
1.13 Test Standards and Limits ............................................................................................... 20
2. Summary of Results .................................................................................................... 22
3. Instruments List ........................................................................................................... 23
4. Measurements .............................................................................................................. 24
5. SAR System Performance Verification ...................................................................... 25
6. DAE & Probe Calibration Certificate .......................................................................... 26
7. Uncertainty Budget ...................................................................................................... 42
8. Phantom Description ................................................................................................... 43
9. System Validation from Original Equipment Supplier .............................................. 44
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 4 of 51
1. General Information
1.1 Testing Laboratory
SGS Taiwan Ltd. Electronics & Communication Laboratory
1F, No. 8, Alley 15, Lane 120, Sec. 1, NeiHu Rd., NeiHu Dist., Taipei City,
Taiwan, 11493.
Tel
+886-2-2299-3279
Fax
+886-2-2298-0488
Internet
http://www.tw.sgs.com/
1.2 Details of Applicant
Company Name
UNIVERSAL GLOBAL SCIENTIFIC INDUSTRIAL CO., LTD.
Company Address
141, Lane 351, Sec. 1, Taiping Road., Tsaotuen, Nantou
54261, Taiwan
1.3 Details of Manufacturer
Company Name
FUJIFILM Corporation
Company Address
7-3, Akasaka 9-Chome, Minato-ku, Tokyo 107-0052 Japan
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 5 of 51
1.4 Description of EUT
Equipment Under Test Digital Camera
Brand Name
FUJIFILM
Model No.
FF180003
FCC ID
COF-WMBNBM26A
Mode of Operation
WLAN802.11 b/g/n(20M)
Bluetooth
WLAN802.11 b/g/n(20M/)
Bluetooth
Duty Cycle
TX Frequency Range
(MHz)
WLAN802.11 b/g/n(20M)
2412
─
2462
Bluetooth
2400
─
2483.5
Channel Number
(ARFCN)
WLAN802.11 b/g/n(20M)
─
11
Bluetooth
─
39
WLAN Max. SAR (1-g) (Unit: W/Kg)
Band
Measured
Reported
Channel
Position
WLAN802.11b
0.036
0.052
Front side
WLAN antenna information:
Chip
Antenna
Frequency
Gain (dBi)
2.4G
-8.2
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 6 of 51
WLAN802.11 b/g/n(20M) conducted power table:
Main Antenna
Band
Max. Rated
Frequency
Avg. Power +
Channel
Data Rate
(MHz)
Max. Tolerance
(dBm)
Mode
802.11b
2450 MHz
802.11g
802.11n20-HT0
11
11
11
2412
2437
2462
2412
2437
2462
2412
2437
2462
1Mbps
6Mbps
MCS0
11.50
11.50
11.50
11.50
11.50
11.50
11.50
11.50
11.50
Average
power
(dBm)
9.89
9.93
10.33
10.33
10.53
11.20
10.08
10.37
10.87
Bluetooth conducted power table:
Mode
LE
Channel
CH 37
CH 18
CH 39
Frequency
(MHz)
Average Output Power (dBm)
GFSK
Max. Rated Avg.
Power + Max.
Tolerance (dBm)
1.87
1.8
1.76
2402
2442
2480
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 7 of 51
1.5 Test Environment
Ambient Temperature: 22±2° C
Tissue Simulating Liquid: 22±2° C
1.6 Operation Description
Use chipset specific software to control the EUT, and makes it transmit in maximum
power. Measurements are performed respectively on the lowest, middle and
highest channels of the operating band(s). The EUT is set to maximum power level
during all tests, and at the beginning of each test the battery is fully charged.
Based on KDB inquiry, EUT was tested as below,
Testing1-g SAR on all surfaces and side edges with a transmitting antenna located
at 25mm from that surface or edge, at 5mm separation from a flat phantom.
Antenna location (front view)
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 8 of 51
Note:
802.11b DSSS SAR Test Requirements:
1. SAR is measured for 2.4 GHz 802.11b DSSS mode using the highest measured
maximum output power channel, when the reported SAR of the highest
measured maximum output power channel for the exposure configuration is ≤
0.8 W/kg, no further SAR testing is required for 802.11b DSSS in that exposure
configuration.
2. When the reported SAR is > 0.8 W/kg, SAR is required for that exposure
configuration using the next highest measured output power channel. When any
reported SAR is > 1.2 W/kg, SAR is required for the third channel; i.e., all
channels require testing.
802.11g/n OFDM SAR Test Exclusion Requirements:
3. SAR is not required for 802.11g/n since the highest reported SAR for DSSS is
adjusted by the ratio of OFDM to DSSS specified maximum output power and
the adjusted SAR is ≤ 1.2 W/kg.
4. WLAN and BT share the same antenna path and they will not transmit
simultaneously.
5. According to KDB447498 D01, testing of other required channels is not required
when the reported 1-g SAR for the highest output channel is ≤ 0.8 W/kg, when
the transmission band is ≤ 100 MHz.
6. According to KDB865664 D01, SAR measurement variability must be assessed
for each frequency band. When the original highest measured SAR is ≥ 0.8 W/kg,
repeated that measurement once. Perform a second repeated measurement
only if the ratio of largest to smallest SAR for the original and first repeated
measurements is > 1.20 or when the original or repeated measurement is ≥ 1.45
W/kg (~10% from the 1-g SAR limit)
7. Based on KDB447498D01, BT SAR measurement is not required.
a) SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation
distances≤ 50 mm are determined by:
Max. tune up power mW
Min. test separation distance mm
f GHz
When the minimum test separation distance is < 5mm, 5mm is applied to
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 9 of 51
determine SAR test exclusion.
Back / front / top / right / bottom / left sides
Maximum power
(dBm)
test separation
distance (mm)
calculated test
exclusion
Require SAR
Testing?
0.499
No
b) For test separation distances > 50 mm, and the frequency at 100 MHz to
1500MHz, the SAR test exclusion threshold is determined according to the
following, and as illustrated in Appendix B of KDB447498 D01.
[(Threshold at 50mm in step1) + (test separation distance - 50mm) x (
)]
(mW),
c) For test separation distances > 50 mm, and the frequency at >1500MHz to
6GHz, the SAR test exclusion threshold is determined according to the
following, and as illustrated in Appendix B of KDB447498 D01.
[(Threshold at 50mm in step1) + (test separation distance-50mm) x 10](mW),
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 10 of 51
1.7 The SAR Measurement System
A block diagram of the SAR measurement System is given in Fig. a. This SAR
Measurement System uses a Computer-controlled 3-D stepper motor system
(SPEAG DASY 5 professional system). The model EX3DV4 field probe is used to
determine the internal electric fields. The SAR can be obtained from the equation
SAR= σ (|Ei|2)/ ρ where σ and ρ are the conductivity and mass density of the
tissue-simulant.
The DASY 5 system for performing compliance tests consists of the following
items:
1. A standard high precision 6-axis robot (Staubli RX family) with controller, teach
pendant and software. An arm extension is for accommodating the data
acquisition electronics (DAE).
2. A dosimetric probe, i.e., an isotropic E-field probe optimized and calibrated for
usage intissue simulating liquid. The probe is equipped with an optical surface
detector system.
3. A data acquisition electronics (DAE) which performs the signal amplification,
signal multiplexing, AD-conversion, offset measurements, mechanical surface
detection, collision detection, etc. The unit is battery powered with standard or
rechargeable batteries. The signal is optically transmitted to the EOC.
Fig. a The block diagram of SAR system
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 11 of 51
4. The Electro-optical converter (EOC) performs the conversion between optical
and electrical of the signals for the digital communication to the DAE and for the
analog signal from the optical surface detection. The EOC is connected to the
measurement server.
5. The function of the measurement server is to perform the time critical tasks such
as signal filtering, control of the robot operation and fast movement interrupts.
6. A probe alignment unit which improves the (absolute) accuracy of the probe
positioning.
7. A computer operating Windows 7.
8. DASY 5 software.
9. Remote control with teach pendant and additional circuitry for robot safety such
as warning lamps, etc.
10. The SAM twin phantom enabling testing left-hand and right-hand usage.
11. The device holder for handheld mobile phones.
12. Tissue simulating liquid mixed according to the given recipes.
13. Validation dipole kits allowing to validate the proper functioning of the system.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 12 of 51
1.8 System Components
EX3DV4 E-Field Probe
Construction Symmetrical design with triangular core
Built-in shielding against static charges
PEEK enclosure material (resistant to
organic solvents, e.g., DGBE)
Calibration
Basic Broad Band Calibration in air
Conversion Factors (CF) for HSL
2450 MHz Additional CF for other liquids
and frequencies upon request
Frequency
Directivity
10 MHz to > 6 GHz
± 0.3 dB in HSL (rotation around probe axis)
± 0.5 dB in tissue material (rotation normal to probe axis)
10 µW/g to > 100 mW/g
Linearity: ± 0.2 dB (noise: typically < 1 µW/g)
Tip diameter: 2.5 mm
High precision dosimetric measurements in any exposure scenario
(e.g., very strong gradient fields). Only probe which enables
compliance testing for frequencies up to 6 GHz with precision of
better 30%.
Dynamic
Range
Dimensions
Application
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 13 of 51
PHANTOM
Model
Construction
ELI
The ELI phantom is used for compliance testing of handheld and
body-mounted wireless devices in the frequency range of 30 MHz
to 6 GHz. ELI is fully compatible with the IEC 62209-2 standard
and all known tissue simulating liquids. ELI has been optimized
regarding its performance and can be integrated into our
standard phantom tables. A cover prevents evaporation of the
liquid. Reference markings on the phantom allow installation of
the complete setup, including all predefined phantom positions
and measurement grids, by teaching three points. The phantom
is compatible with all SPEAG dosimetric probes and dipoles.
2 ± 0.2 mm
Shell
Thickness
Filling Volume Approx. 30 liters
Dimensions
Major axis: 600 mm
Minor axis: 400 mm
DEVICE HOLDER
Construction The device holder (Supporter)
for Notebook is made by POM
(polyoxymethylene resin ) ,
which is non-metal and
non-conductive. The height can
be adjusted to fit varies kind of
notebooks.
Device Holder
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 14 of 51
1.9 SAR System Verification
The microwave circuit arrangement for system verification is sketched in Fig. b. The
daily system accuracy verification occurs within the flat section of the SAM
phantom. A SAR measurement was performed to see if the measured SAR was
within +/- 10% from the target SAR values. These tests were done at 2450MHz.
The tests were conducted on the same days as the measurement of the DUT. The
obtained results from the system accuracy verification are displayed in the table 1
(SAR values are normalized to 1W forward power delivered to the dipole). During
the tests, the liquid depth above the ear reference points was ≥ 15 cm ± 5 mm
(frequency ≤ 3 GHz) or ≥ 10 cm ± 5 mm (frequency > 3 G Hz) in all the cases. It is
seen that the system is operating within its specification, as the results are within
acceptable tolerance of the reference values.
Fig. b The block diagram of system verification
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 15 of 51
Validation
Kit
S/N
D2450V2
727
Frequency
(MHz)
2450
1W Target
SAR-1g
(mW/g)
Measured
SAR-1g
(mW/g)
Measured
SAR-1g
normalized to
1W (mW/g)
Deviation
(%)
Measured
Date
50.6
12.3
49.2
-2.77%
Apr. 03, 2018
Body
Table 1. Results of system validation
1.10 Tissue Simulant Fluid for the Frequency Band
The dielectric properties for this body-simulant fluid were measured by using the
Agilent Model 85070E Dielectric Probe (rates frequency band 200 MHz to 20 GHz)
in conjunction with Network Analyzer (30 KHz-6000 MHz).
All dielectric parameters of tissue simulates were measured within 24 hours of SAR
measurements. The depth of the tissue simulant in the flat section of the phantom
was ≥ 15 cm ± 5 mm (Frequency ≤3G) or ≥ 10 cm ± 5 mm (Frequency >3G) during
all tests. (Fig. 2)
Tissue
Type
Measured
Frequency
(MHz)
Target
Dielectric
Constant,
εr
Target
Conductivity,
σ (S/m)
Measured
Dielectric
Constant,
εr
Measured
Conductivity,
σ (S/m)
% dev εr
% dev σ
2412.00
52.751
1.914
53.887
1.846
-2.15%
3.54%
2437.00
52.717
1.938
53.762
1.881
-1.98%
2.92%
2450.00
52.700
1.950
53.731
1.897
-1.96%
2.72%
2462.00
52.685
1.967
53.664
1.918
-1.86%
2.49%
Body
Measurement
Date
Apr. 03, 2108
Table 2. Dielectric Parameters of Tissue Simulant Fluid
The composition of the tissue simulating liquid:
Ingredient
Frequency
(MHz)
Mode
2450M
Body
DGMBE
Water
301.7ml 698.3ml
Total
Preventol
Salt
Cellulose Sugar amount
D-7
─
─
─
─
1.0L(Kg)
Table 3. Recipes for Tissue Simulating Liquid
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 16 of 51
1.11 Evaluation Procedures
The entire evaluation of the spatial peak values is performed within the
Post-processing engine (SEMCAD). The system always gives the maximum
values for the 1 g and 10 g cubes. The algorithm to find the cube with highest
averaged SAR is divided into the following stages:
1. The extraction of the measured data (grid and values) from the Zoom Scan.
2. The calculation of the SAR value at every measurement point based on all
stored data (A/D values and measurement parameters)
3. The generation of a high-resolution mesh within the measured volume
4. The interpolation of all measured values from the measurement grid to the
high-resolution grid
5. The extrapolation of the entire 3-D field distribution to the phantom surface
over the distance from sensor to surface
6. The calculation of the averaged SAR within masses of 1g and 10g.
The probe is calibrated at the center of the dipole sensors that is located 1 to
2.7mm away from the probe tip. During measurements, the probe stops shortly
above the phantom surface, depending on the probe and the surface detecting
system. Both distances are included as parameters in the probe configuration file.
The software always knows exactly how far away the measured point is from the
surface. As the probe cannot directly measure at the surface, the values between
the deepest measured point and the surface must be extrapolated. The angle
between the probe axis and the surface normal line is less than 30 degree.
In the Area Scan, the gradient of the interpolation function is evaluated to find all
the extreme of the SAR distribution. The uncertainty on the locations of the
extreme is less than 1/20 of the grid size. Only local maximum within –2 dB of the
global maximum are searched and passed for the Cube Scan measurement. In
the Cube Scan, the interpolation function is used to extrapolate the Peak SAR
from the lowest measurement points to the inner phantom surface (the
extrapolation distance). The uncertainty increases with the extrapolation distance.
To keep the uncertainty within 1% for the 1 g and 10 g cubes, the extrapolation
distance should not be larger than 5mm.
The maximum search is automatically performed after each area scan
measurement. It is based on splines in two or three dimensions. The procedure
can find the maximum for most SAR distributions even with relatively large grid
spacing. After the area scanning measurement, the probe is automatically moved
to a position at the interpolated maximum. The following scan can directly use this
position for reference, e.g., for a finer resolution grid or the cube evaluations. The
1g and 10g peak evaluations are only available for the predefined cube 7x7x7
scans. The routines are verified and optimized for the grid dimensions used in
these cube measurements.
The measured volume of 30x30x30mm contains about 30g of tissue.
The first procedure is an extrapolation (incl. Boundary correction) to get the points
between the lowest measured plane and the surface. The next step uses 3D
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 17 of 51
interpolation to get all points within the measured volume. In the last step, a 1g
cube is placed numerically into the volume and its averaged SAR is calculated.
This cube is the moved around until the highest averaged SAR is found. If the
highest SAR is found at the edge of the measured volume, the system will issue a
warning: higher SAR values might be found outside of the measured volume. In
that case the cube measurement can be repeated, using the new interpolated
maximum as the center.
1.12 Probe Calibration Procedures
For the calibration of E-field probes in lossy liquids, an electric field with an
accurately known field strength must be produced within the measured liquid. For
standardization purposes it would be desirable if all measurements which are
necessary to assess the correct field strength would be traceable to standardized
measurement procedures. In the following two different calibration techniques are
summarized:
1.12.1 Transfer Calibration with Temperature Probes
In lossy liquids the specific absorption rate (SAR) is related both to the
electric field (  ) and the temperature gradient (  T /  t ) in the liquid.
SAR = C
T
t
whereby σ is the conductivity, ρ the density and c the heat capacity of the
liquid.
Hence, the electric field in lossy liquid can be measured indirectly by
measuring the temperature gradient in the liquid. Non-disturbing
temperature probes (optical probes or thermistor probes with resistive lines)
with high spatial resolution (<1-2 mm) and fast reaction time (<1 s) are
available and can be easily calibrated with high precision [1]. The setup
and the exciting source have no influence on the calibration; only the
relative positioning uncertainties of the standard temperature probe and the
E-field probe to be calibrated must be considered. However, several
problems limit the available accuracy of probe calibrations with
temperature probes:
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 18 of 51
 The temperature gradient is not directly measurable but must be
evaluated from temperature measurements at different time steps.
Special precaution is necessary to avoid measurement errors caused by
temperature gradients due to energy equalizing effects or convection
currents in the liquid. Such effects cannot be completely avoided, as the
measured field itself destroys the thermal equilibrium in the liquid. With a
careful setup these errors can be kept small.
 The measured volume around the temperature probe is not well defined.
It is difficult to calculate the energy transfer from a surrounding gradient
temperature field into the probe. These effects must be considered,
since temperature probes are calibrated in liquid with homogeneous
temperatures. There is no traceable standard for temperature rise
measurements.
 The calibration depends on the assessment of the specific density, the
heat capacity and the conductivity of the medium. While the specific
density and heat capacity can be measured accurately with
standardized procedures (~ 2% for c; much better for ρ) , there is no
standard for the measurement of the conductivity. Depending on the
method and liquid, the error can well exceed ±5%.
 Temperature rise measurements are not very sensitive and therefore
are often performed at a higher power level than the E-field
measurements. The nonlinearities in the system (e.g., power
measurements, different components, etc.) must be considered.
Considering these problems, the possible accuracy of the calibration of
E-field probes with temperature gradient measurements in a carefully
designed setup is about ±10% (RSS) [2]. Recently, a setup which is a
combination of the waveguide techniques and the thermal measurements
was presented in [3]. The estimated uncertainty of the setup is ±5% (RSS)
when the same liquid is used for the calibration and for actual
measurements and ±7-9% (RSS) when not, which is in good agreement
with the estimates given in [2].
1.12.2 Calibration with Analytical Fields
In this method a technical setup is used in which the field can be calculated
analytically from measurements of other physical magnitudes (e.g., input
power). This corresponds to the standard field method for probe calibration
in air; however, there is no standard defined for fields in lossy liquids.
When using calculated fields in lossy liquids for probe calibration, several
points must be considered in the assessment of the uncertainty:
 The setup must enable accurate determination of the incident power.
 The accuracy of the calculated field strength will depend on the
assessment of the dielectric parameters of the liquid.
 Due to the small wavelength in liquids with high permittivity, even small
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 19 of 51
setups might be above the resonant cutoff frequencies. The field
distribution in the setup must be carefully checked for conformity with the
theoretical field distribution.
References
1.
2.
3.
N. Kuster, Q. Balzano, and J.C. Lin, Eds., Mobile Communications
Safety, Chapman & Hall, London, 1997.
K. Meier, M. Burkhardt, T. Schmid, and N. Kuster, \Broadband
calibration of E-field probes in lossy media", IEEE Transactions on
Microwave Theory and Techniques, vol. 44, no. 10, pp. 1954{1962,
Oct. 1996.
K. Jokela, P. Hyysalo, and L. Puranen, \Calibration of specific
absorption rate (SAR) probes in waveguide at 900 MHz", IEEE
Transactions on Instrumentation and Measurements, vol. 47, no. 2, pp.
432{438, Apr. 1998.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 20 of 51
1.13 Test Standards and Limits
According to FCC 47CFR §2.1093(d) The limits to be used for evaluation are
based generally on criteria published by the American National Standards
Institute (ANSI) for localized specific absorption rate (‘‘SAR’’) in Section 4.2 of
‘‘IEEE Standard for Safety Levels with Respect to Human Exposure to Radio
Frequency Electromagnetic Fields, 3 kHz to 300 GHz,’’ ANSI/IEEE C95.1, By the
Institute of Electrical and Electronics Engineers, Inc., New York, New York 10017.
These criteria for SAR evaluation are similar to those recommended by the
National Council on Radiation Protection and Measurements (NCRP) in
‘‘Biological Effects and Exposure Criteria for Radio frequency Electromagnetic
Fields,’’ NCRP Report No. 86, Section 17.4.5. Copyright NCRP, 1986, Bethesda,
Maryland 20814. SAR is a measure of the rate of energy absorption due to
exposure to an RF transmitting source. SAR values have been related to
threshold levels for potential biological hazards. The criteria to be used are
specified in paragraphs (d)(1) and (d)(2) of this section and shall apply for
portable devices transmitting in the frequency range from 100 kHz to 6 GHz.
Portable devices that transmit at frequencies above 6 GHz are to be evaluated in
terms of the MPE limits specified in § 1.1310 of this chapter. Measurements and
calculations to demonstrate compliance with MPE field strength or power density
limits for devices operating above 6 GHz should be made at a minimum distance
of 5 cm from the radiating source.
(1) Limits for Occupational/Controlled exposure: 0.4 W/kg as averaged over the
whole-body and spatial peak SAR not exceeding 8 W/kg as averaged over
any 1 gram of tissue (defined as a tissue volume in the shape of a cube).
Exceptions are the hands, wrists, feet and ankles where the spatial peak
SAR shall not exceed 20 W/kg, as averaged over an 10 grams of tissue
(defined as a tissue volume in the shape of a cube).
(2) Occupational/Controlled limits apply when persons are exposed as a
consequence of their employment provided these persons are fully aware of
and exercise control over their exposure. Awareness of exposure can be
accomplished by use of warning labels or by specific training or education
through appropriate means, such as an RF safety program in a work
environment.
(3) Limits for General Population/Uncontrolled exposure: 0.08 W/kg as
averaged over the whole-body and spatial peak SAR not exceeding 1.6
W/kg as averaged over any 1 gram of tissue (defined as a tissue volume in
the shape of a cube). Exceptions are the hands, wrists, feet and ankles
where the spatial peak SAR shall not exceed 4 W/kg, as averaged over any
10 grams of tissue (defined as a tissue volume in the shape of a cube).
General Population/Uncontrolled limits apply when the general public may
be exposed, or when persons that are exposed as a consequence of their
employment may not be fully aware of the potential for exposure or do not
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 21 of 51
exercise control over their exposure. Warning labels placed on consumer
devices such as cellular telephones will not be sufficient reason to allow
these devices to be evaluated subject to limits for occupational/controlled
exposure in paragraph (d)(1) of this section. (Table 4.)
Human Exposure
Spatial Peak SAR
(Brain)
Spatial Average SAR
(Whole Body)
Spatial Peak SAR
(Hands/Feet/Ankle/Wrist)
Uncontrolled
Environment
General Population
Controlled Environment
Occupational
1.60 W/kg
8.00 W/kg
0.08 W/kg
0.40 W/kg
4.00 W/kg
20.00 W/kg
Table 4. RF exposure limits
Notes:
1. Uncontrolled environments are defined as locations where there is potential exposure of
individuals who have no knowledge or control of their potential exposure.
2. Controlled environments are defined as locations where there is potential exposure of
individuals who have knowledge of their potential exposure and can exercise control
over their exposure.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 22 of 51
2. Summary of Results
Mode
WLAN802.11 b
Averaged SAR over 1g
(W/kg)
Position
Distance
(mm)
CH
Freq.
(MHz)
Max. Rated Avg.
Power + Max.
Tolerance (dBm)
Measured
Avg. Power
(dBm)
Scaling
Measured
Reported
Front sdie
2412
11.5
9.89
144.88%
0.036
0.052
24
Front sdie
2437
11.5
9.93
143.55%
0.018
0.026
Front sdie
11
2462
11.5
10.33
130.92%
0.020
0.026
Back sdie
11
2462
11.5
10.33
130.92%
0.002
0.003
Plot
page
Top side
11
2462
11.5
10.33
130.92%
0.000
0.000
Bottom side
11
2462
11.5
10.33
130.92%
0.000
0.000
Right side
11
2462
11.5
10.33
130.92%
0.002
0.003
Left side
11
2462
11.5
10.33
130.92%
0.000
0.000
Note:
10
Scaling =
Reported SAR = measured SAR * (scaling)
Where P2 is maximum specified power, P1 is measured conducted power
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 23 of 51
3. Instruments List
Manufacturer
SPEAG
SPEAG
SPEAG
SPEAG
SPEAG
Agilent
Agilent
Agilent
Agilent
Device
Type
Serial
number
Date of last Date of next
calibration calibration
3770
Apr.27,2017 Apr.26,2018
727
Apr.21,2017 Apr.20,2018
856
Aug.10,2017 Aug.09,2018
Dosimetric E-Field
EX3DV4
Probe
System Validation
D2450V2
Dipole
Data acquisition
DAE3
Electronics
DASY 52
Software
V52.8.8
Phantom
Calibration
not required
Calibration
not required
N/A
ELI
N/A
Calibration
not required
Calibration
not required
Network Analyzer E5071C MY46315263 Sep.08,2017 Sep.07,2018
Dielectric
Probe Kit
Dual-directional
coupler
RF Signal
Generator
Agilent
Power Meter
Agilent
Power Sensor
TECPEL
Digital
thermometer
85070E MY44300677
772D
Calibration Calibration
not required not required
MY52180142 Apr.13,2017 Apr.12,2018
N5181A MY50144143 Mar.14,2018 Mar.13,2019
E4417A MY52240003 Dec.21,2017 Dec.20,2018
E9301H
MY52200003 Dec.21,2017 Dec.20,2018
MY52200004 Dec.21,2017 Dec.20,2018
DTM-303A TP130077 Mar.09,2018 Mar.08,2019
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 24 of 51
4. Measurements
Date: 2018/4/3
WLAN 802.11b_Body_Front side_CH 1_5mm
Communication System: WLAN 2.45G; Frequency: 2412 MHz
Medium parameters used: f = 2412 MHz; σ = 1.846 S/m; εr = 53.887; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 22.1°C; Liquid temperature: 21.8°C
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(7.47, 7.47, 7.47); Calibrated: 2017/4/27;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 2017/4/28
 Phantom: Body
 DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Body/Area Scan (101x141x1): Interpolated grid: dx=12 mm, dy=12
mm
Maximum value of SAR (interpolated) = 0.0603 W/kg
Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 1.316 V/m; Power Drift = -0.12 dB
Peak SAR (extrapolated) = 0.0880 W/kg
SAR(1 g) = 0.036 W/kg; SAR(10 g) = 0.014 W/kg
Maximum value of SAR (measured) = 0.0568 W/kg
0 dB = 0.0568 W/kg = -12.46 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 25 of 51
5. SAR System Performance Verification
Date: 2018/4/3
Dipole 2450 MHz_SN:727
Communication System: CW; Frequency: 2450 MHz
Medium parameters used: f = 2450 MHz; σ = 1.897 S/m; εr = 53.731; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 22.1°C; Liquid temperature: 21.8°C
DASY5 Configuration:
 Probe: EX3DV4 - SN3770; ConvF(7.47, 7.47, 7.47); Calibrated: 2017/4/27;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn856; Calibrated: 2017/4/28
 Phantom: Body
 DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373)
Configuration/Pin=250mW/Area Scan (51x51x1): Interpolated grid: dx=12 mm,
dy=12 mm
Maximum value of SAR (interpolated) = 20.2 W/kg
Configuration/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 100.4 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 26.4 W/kg
SAR(1 g) = 12.3 W/kg; SAR(10 g) = 5.52 W/kg
Maximum value of SAR (measured) = 19.1 W/kg
0 dB = 19.1 W/kg = 12.81 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 26 of 51
6. DAE & Probe Calibration Certificate
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 27 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 28 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 29 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 30 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 31 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 32 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 33 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 34 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 35 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 36 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 37 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 38 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 39 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 40 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 41 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 42 of 51
7. Uncertainty Budget
Measurement Uncertainty evaluation template for DUT SAR test (0.3-3G)
Source of Uncertainty
Tolerance/ Probability
Uncertainty Distributio
Div
Div Value
ci (1g)
h=c * f / e
i=c * g / e
ci (10g)
Standard
uncertainty
Standard
uncertainty
vi, or Veff
Measurement system
6.00%
6.00%
∞
√3
1.732
2.02%
2.02%
∞
√3
1.732
5.54%
5.54%
∞
2.40%
√3
1.732
1.40%
1.40%
∞
Boundary Effect
1.00%
√3
1.732
0.58%
0.58%
∞
Linearity
4.70%
√3
1.732
2.71%
2.71%
∞
Detection Limits
1.00%
√3
1.732
0.58%
0.58%
∞
Readout Electronics
0.30%
0.30%
0.30%
∞
Response time
0.80%
√3
1.732
0.46%
0.46%
∞
Integration Time
2.60%
√3
1.732
1.50%
1.50%
∞
1.75%
√3
1.732
1.01%
1.01%
∞
3.00%
√3
1.732
1.73%
1.73%
∞
3.00%
√3
1.732
1.73%
1.73%
∞
0.40%
√3
1.732
0.23%
0.23%
∞
2.90%
√3
1.732
1.67%
1.67%
∞
Post-processing
1.00%
√3
1.732
0.58%
0.58%
∞
Max SAR Eval
1.00%
√3
1.732
0.58%
0.58%
∞
Test sample positioning
2.90%
2.90%
2.90%
M-1
Device Holder Uncertainty
3.60%
3.60%
3.60%
M-1
Drift of output power
5.00%
√3
1.732
2.89%
2.89%
∞
4.00%
√3
1.732
2.31%
2.31%
∞
-2.15%
0.64
0.43
-1.38%
-0.92%
3.54%
0.6
0.49
2.12%
1.73%
11.69%
11.58%
23.39%
23.15%
Probe calibration
6.00%
Isotropy , Axial
3.50%
Isotropy, Hemispherical
9.60%
Modulation Response
Measurement drift
(class A evaluation)
RF ambient condition noise
RF ambient conditions reflections
Probe positioner
Mechanical restrictions
Probe Positioning with
respect to phantom shell
Test Sample related
Phantom and Setup
Phantom Uncertainty
Liquid permittivity (mea.)
Liquid Conductivity (mea.)
Combined standard
uncertainty
Expant uncertainty (95%
confidence interval), K=2
RSS
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 43 of 51
8. Phantom Description
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 44 of 51
9. System Validation from Original Equipment Supplier
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 45 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 46 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 47 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 48 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 49 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 50 of 51
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : EN/2018/30013
Page : 51 of 51
- End of report -
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Download: WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Mirror Download [FCC.gov]WMBNBM26A 802.11a/b/g/n + BT Wireless LAN Module Test Report SAR Universal Global Scientific Industrial Co., Ltd.
Document ID3920221
Application IDKzEvxvDGPBPPyYZAKxwHwg==
Document DescriptionSAR Test Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize81.35kB (1016930 bits)
Date Submitted2018-07-11 00:00:00
Date Available2018-07-11 00:00:00
Creation Date2018-05-23 17:11:40
Producing SoftwareAcrobat Distiller 17.0 (Windows)
Document Lastmod2018-05-23 17:12:09
Document TitleSAR Test Report
Document CreatorPScript5.dll Version 5.2.2

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : 
Create Date                     : 2018:05:23 17:11:40+08:00
Modify Date                     : 2018:05:23 17:12:09+08:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Producer                        : Acrobat Distiller 17.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:05:23 17:12:09+08:00
Format                          : application/pdf
Creator                         : 
Title                           : 
Document ID                     : uuid:652f235f-6b4d-4316-b864-77069c6bd312
Instance ID                     : uuid:2923851b-2e3d-4c9f-9b7b-45a0438da3c1
Page Count                      : 51