FCC ID CWTUGPZ2
Bluetooth Transceiver Module
by ALPS ALPINE CO., LTD.
Grantee Code: CWT Product Code: UGPZ2
Latest application date: 2002-11-01
FCC ID Device Details
| FCC ID | CWTUGPZ2 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | CWT |
| Product Code | UGPZ2 |
| Applicant Business | ALPS ALPINE CO., LTD. 🇯🇵 |
| Related Domains |  jp.alps.com |
| Equipment Class | Bluetooth Transceiver Module |
| Test Firm | Eurofins Product Service GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2002-11-01 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| internal photos | Internal Photos | 2002-11-01 | PDF 710.6 KB |
| external photos | External Photos | 2002-11-01 | PDF 291.1 KB |
| label location | ID Label/Location Info | 2002-11-01 | PDF 43.6 KB |
| label sample | ID Label/Location Info | 2002-11-01 | PDF 43.6 KB |
| operational description | Operational Description | 2002-11-01 | PDF 145.5 KB |
| test setup | Test Setup Photos | 2002-11-01 | PDF 378.5 KB |
| test report 1 of 3 | Test Report | 2002-11-01 | PDF 156.2 KB |
| test report 2 of 3 | Test Report | 2002-11-01 | PDF 3.6 MB |
| test report 3 of 3 | Test Report | 2002-11-01 | PDF 3 MB |
| confidentiality request | Cover Letter(s) | 2002-11-01 | PDF 38.5 KB |
| cover letter regarding modular approval | Cover Letter(s) | 2002-11-01 | PDF 132.6 KB |
| users manual Metadata only | Users Manual | PDF 252.9 KB | |
| block diagram Metadata only | Block Diagram | PDF 39.2 KB | |
| assembly drawing Metadata only | Schematics | PDF 48.2 KB | |
| schematics Metadata only | Schematics | PDF 2.2 MB | |
| external antenna specification Metadata only | Operational Description | PDF 25.4 KB | |
| onboard antenna specification Metadata only | Operational Description | PDF 25.5 KB | |
| parts list Metadata only | Parts List/Tune Up Info | PDF 14.8 KB |
Application Information
| Application ID | JfpkpqZr2UviaMMaOD1sMQ== |
|---|---|
| Final Action Date | 2002-11-01 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0006935803 |
| Model | UGPZ2 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Bluetooth Transceiver Module |
| Responsible Party | Yuji Ouchi, yuji.ouchi@jp.alps.com , 229 23 5111 |
| Test Firm | Robert Kschiwan-Kaspar, Eurofins Product Service GmbH, rkk@eurofins.de  , 49-33631-888-000 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. This modular transmitter is approved for use in personal computers, PDAs, mobile phones, digital cameras, and may operate in conjunction with other mobile and portable transmitters; provided, the other mobile and portable transmitters have satisfied the appropriate RF exposure requirements contained in the FCC rules. The grantee also must provide OEM integrators, or end users if marketed directly to end users, with installation and operating instructions for satisfying RF exposure requirements. The Grantee must inform second manufacturers/installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences, a separate FCC equipment authorization must be obtained for each device into which this module is installed. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. If the Grantee does not provide an antenna with this module, it may not be sold to the end- user, but may be sold to a second manufacturer/installer. Instructions must be provided by the Grantee to the second manufacturer/installer that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector). Compliance of this module in its final configuration is the responsibility of the Grantee. If the second manufacturer/installer desires to use an antenna with this module that has not been previously approved for use with it, then the Grantee must file a Class II permissive change to approve the new antenna with the module. Alternatively, the second manufacturer/installer may obtain a separate FCC equipment authorization for the module and the new antenna. If the second manufacturer/installer markets a device that does not comply with the Grantee instructions for antenna configuration without having obtained a separate FCC equipment authorization for the module and new antenna configuration, that device will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| JfpkpqZr2UviaMMaOD1sMQ== | 2002-11-01 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0010000 | 15C |
Grants
TCB Grant - Application JfpkpqZr2UviaMMaOD1sMQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/01/2002 Application Dated: 11/01/2002 |
| ALPS ALPINE CO., LTD. |
| 6-3-36, Furukawanakazato |
| Osaki-city Miyagi-pref, 989-6181 Japan |
| Attention: Yuji Ouchi |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CWTUGPZ2 |
| Name of Grantee: | ALPS ALPINE CO., LTD. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 |
| Power listed is conducted. This modular transmitter is approved for use in personal computers, PDAs, mobile phones, digital cameras, and may operate in conjunction with other mobile and portable transmitters; provided, the other mobile and portable transmitters have satisfied the appropriate RF exposure requirements contained in the FCC rules. The grantee also must provide OEM integrators, or end users if marketed directly to end users, with installation and operating instructions for satisfying RF exposure requirements. The Grantee must inform second manufacturers/installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences, a separate FCC equipment authorization must be obtained for each device into which this module is installed. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. If the Grantee does not provide an antenna with this module, it may not be sold to the end- user, but may be sold to a second manufacturer/installer. Instructions must be provided by the Grantee to the second manufacturer/installer that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector). Compliance of this module in its final configuration is the responsibility of the Grantee. If the second manufacturer/installer desires to use an antenna with this module that has not been previously approved for use with it, then the Grantee must file a Class II permissive change to approve the new antenna with the module. Alternatively, the second manufacturer/installer may obtain a separate FCC equipment authorization for the module and the new antenna. If the second manufacturer/installer markets a device that does not comply with the Grantee instructions for antenna configuration without having obtained a separate FCC equipment authorization for the module and new antenna configuration, that device will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. |
EAS Grant - Application JfpkpqZr2UviaMMaOD1sMQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ALPS ALPINE CO., LTD. 6-3-36, Furukawanakazato Osaki-city Miyagi-pref, 989-6181 Japan |
Date of Grant: 11/01/2002 Application Dated: 11/01/2002 |
| Attention: Yuji Ouchi |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CWTUGPZ2 |
| Name of Grantee: | ALPS ALPINE CO., LTD. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 |
| Power listed is conducted. This modular transmitter is approved for use in personal computers, PDAs, mobile phones, digital cameras, and may operate in conjunction with other mobile and portable transmitters; provided, the other mobile and portable transmitters have satisfied the appropriate RF exposure requirements contained in the FCC rules. The grantee also must provide OEM integrators, or end users if marketed directly to end users, with installation and operating instructions for satisfying RF exposure requirements. The Grantee must inform second manufacturers/installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences, a separate FCC equipment authorization must be obtained for each device into which this module is installed. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. If the Grantee does not provide an antenna with this module, it may not be sold to the end- user, but may be sold to a second manufacturer/installer. Instructions must be provided by the Grantee to the second manufacturer/installer that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector). Compliance of this module in its final configuration is the responsibility of the Grantee. If the second manufacturer/installer desires to use an antenna with this module that has not been previously approved for use with it, then the Grantee must file a Class II permissive change to approve the new antenna with the module. Alternatively, the second manufacturer/installer may obtain a separate FCC equipment authorization for the module and the new antenna. If the second manufacturer/installer markets a device that does not comply with the Grantee instructions for antenna configuration without having obtained a separate FCC equipment authorization for the module and new antenna configuration, that device will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. |
| Mail To: |