FCC ID CWWP5XXUL1
AMPLIFIER
by Crescend Technologies LLC
Grantee Code: CWW Product Code: P5XXUL1
Latest application date: 2014-10-01
FCC ID Device Details
| FCC ID | CWWP5XXUL1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | CWW |
| Product Code | P5XXUL1 |
| Applicant Business | Crescend Technologies LLC 🇺🇸 |
| Related Domains | |
| Equipment Class | AMPLIFIER |
| Test Firm | Timco Engineering, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 406.1-450 MHz | Class II permissive change or modification of presently authorized equipment | 2014-10-01 |
| 406.1-450 MHz | Original Equipment | 2013-04-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2013-06-03 | PDF 56.9 KB |
| Internal Photos | Internal Photos | 2013-06-03 | PDF 4.1 MB |
| External Photos | External Photos | 2013-06-03 | PDF 4.4 MB |
| Label | ID Label/Location Info | 2013-04-19 | PDF 6.1 KB |
| Test set up photos | Test Setup Photos | 2014-10-01 | PDF 2 MB |
| Test Setup Photos | Test Setup Photos | 2013-04-19 | PDF 1.2 MB |
| Test Report | Test Report | 2014-10-01 | PDF 235.8 KB |
| Test Report | Test Report | 2013-04-19 | PDF 247.1 KB |
| Attestation statement | Attestation Statements | 2014-10-01 | PDF 157 KB |
| Class II Permissive change request letter | Cover Letter(s) | 2014-10-01 | PDF 145.3 KB |
| Confidentiality request letter | Cover Letter(s) | 2014-10-01 | PDF 51.7 KB |
| Frequency justification letter | Cover Letter(s) | 2014-10-01 | PDF 68.9 KB |
| Confidential Letter | Cover Letter(s) | 2013-04-19 | PDF 45.5 KB |
| Error Message | Cover Letter(s) | 2013-04-19 | PDF 30.9 KB |
| RF Exposure | RF Exposure Info | 2013-04-19 | PDF 134.6 KB |
| Block diagram Metadata only | Block Diagram | PDF 36.8 KB | |
| Schematic Metadata only | Schematics | PDF 65.7 KB | |
| Circuit description Metadata only | Operational Description | PDF 25.2 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 14.4 KB | |
| Tuning Procedure Metadata only | Parts List/Tune Up Info | PDF 18.4 KB |
Application Information
| Application ID | XFo9wXLWMptZqworPqwCYw== |
|---|---|
| Final Action Date | 2014-10-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004288767 |
| Model | P5XXUL1 |
| Frequency Range | 406.1-450 MHz |
| Equipment Class | AMP - Amplifier |
| Device Description | AMPLIFIER |
| Responsible Party | James Hougo, President, jhougo@crescendtech.com |
| Technical Contact | Sid Sanders, Timco Engineering, Inc., tei@timcoengr.com |
| Non-Technical Contact | Sharon Hoffman, Timco Engineering, Inc., shoffman@timcoengr.com |
| Test Firm | Bruno Clavier, Timco Engineering, Inc., bruno@timcoengr.com |
| TCB Email | tei@timcoengr.com |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz) |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is rated conducted. Maximum conducted power output according to 90.205(s) is 60W. The antennas used for this amplifier must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of Section 1.1307(b)(3). 10/1/2014 - Class 2 Permissive Change: To extend frequency range to 470 MHz. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| XFo9wXLWMptZqworPqwCYw== | 2014-10-01 | Class II permissive change or modification of presently authorized equipment |
| CfdvUkMVJK892cTByL6BFQ== | 2013-04-19 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 406.1-450 MHz | 50 | Amp | F1D | 9 | BQ |
| 406.1-450 MHz | 50 | Amp | F1E | 9 | BQ, EF |
| 406.1-450 MHz | 50 | Amp | F1E | 9 | BQ |
| 406.1-450 MHz | 50 | Amp | F2D | 9 | BQ, EF |
| 406.1-450 MHz | 50 | Amp | F2D | 9 | BQ |
| 406.1-450 MHz | 50 | Amp | F3E | 9 | BQ, EF |
| 406.1-450 MHz | 50 | Amp | F3E | 9 | BQ |
| 406.1-450 MHz | 50 | Amp | G3E | 9 | BQ, EF |
| 406.1-450 MHz | 50 | Amp | G3E | 9 | BQ |
| 406.1-450 MHz | 50 | Amp | F1W | 9 | BQ, EF |
| 406.1-450 MHz | 50 | Amp | F1W | 9 | BQ |
| 450-470 MHz | 50 | Amp | F3E | 9 | BQ, EF |
| 450-470 MHz | 50 | Amp | G3E | 9 | BQ, EF |
| 450-470 MHz | 50 | Amp | F1W | 9 | BQ, EF |
| 450-470 MHz | 50 | Amp | F1D | 9 | BQ, EF |
| 450-470 MHz | 50 | Amp | F1E | 9 | BQ, EF |
| 450-470 MHz | 50 | Amp | F2D | 9 | BQ, EF |
Grants
TCB Grant - Application XFo9wXLWMptZqworPqwCYw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/01/2014 Application Dated: 10/01/2014 |
| Crescend Technologies LLC |
| 140 East State Parkway |
| Schaumburg, IL 60173 |
| Attention: James Hougo , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CWWP5XXUL1 |
| Name of Grantee: | Crescend Technologies LLC |
| Equipment Class: | Amplifier |
| Notes: | AMPLIFIER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BQ EF | 90 | 406.1 - 450.0 | 50.0 | Amp | F1D |
| BQ EF | 90 | 406.1 - 450.0 | 50.0 | Amp | F1E |
| BQ EF | 90 | 406.1 - 450.0 | 50.0 | Amp | F2D |
| BQ EF | 90 | 406.1 - 450.0 | 50.0 | Amp | F3E |
| BQ EF | 90 | 406.1 - 450.0 | 50.0 | Amp | G3E |
| BQ EF | 90 | 406.1 - 450.0 | 50.0 | Amp | F1W |
| BQ EF | 90 | 450.0 - 470.0 | 50.0 | Amp | F1D |
| BQ EF | 90 | 450.0 - 470.0 | 50.0 | Amp | F1E |
| BQ EF | 90 | 450.0 - 470.0 | 50.0 | Amp | F2D |
| BQ EF | 90 | 450.0 - 470.0 | 50.0 | Amp | F3E |
| BQ EF | 90 | 450.0 - 470.0 | 50.0 | Amp | G3E |
| BQ EF | 90 | 450.0 - 470.0 | 50.0 | Amp | F1W |
| Power Output listed is rated conducted. Maximum conducted power output according to 90.205(s) is 60W. The antennas used for this amplifier must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of Section 1.1307(b)(3). 10/1/2014 - Class 2 Permissive Change: To extend frequency range to 470 MHz. |
| BQ: | The output power is continuously variable from the value listed in this entry to 70%-75% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
EAS Grant - Application XFo9wXLWMptZqworPqwCYw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Crescend Technologies LLC 140 East State Parkway Schaumburg, IL 60173 United States |
Date of Grant: 10/01/2014 Application Dated: 10/01/2014 |
| Attention: James Hougo , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CWWP5XXUL1 |
| Name of Grantee: | Crescend Technologies LLC |
| Equipment Class: | Amplifier |
| Notes: | AMPLIFIER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BQ EF | 90 | 406.1 - 450.0 | 50.0 | Amp | F1D |
| BQ EF | 90 | 406.1 - 450.0 | 50.0 | Amp | F1E |
| BQ EF | 90 | 406.1 - 450.0 | 50.0 | Amp | F2D |
| BQ EF | 90 | 406.1 - 450.0 | 50.0 | Amp | F3E |
| BQ EF | 90 | 406.1 - 450.0 | 50.0 | Amp | G3E |
| BQ EF | 90 | 406.1 - 450.0 | 50.0 | Amp | F1W |
| BQ EF | 90 | 450.0 - 470.0 | 50.0 | Amp | F1D |
| BQ EF | 90 | 450.0 - 470.0 | 50.0 | Amp | F1E |
| BQ EF | 90 | 450.0 - 470.0 | 50.0 | Amp | F2D |
| BQ EF | 90 | 450.0 - 470.0 | 50.0 | Amp | F3E |
| BQ EF | 90 | 450.0 - 470.0 | 50.0 | Amp | G3E |
| BQ EF | 90 | 450.0 - 470.0 | 50.0 | Amp | F1W |
| Power Output listed is rated conducted. Maximum conducted power output according to 90.205(s) is 60W. The antennas used for this amplifier must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of Section 1.1307(b)(3). 10/1/2014 - Class 2 Permissive Change: To extend frequency range to 470 MHz. |
| BQ: | The output power is continuously variable from the value listed in this entry to 70%-75% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 04/19/2013 Application Dated: 04/18/2013 |
| Crescend Technologies LLC |
| 140 East State Parkway |
| Schaumburg, IL 60173 |
| Attention: James Hougo , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CWWP5XXUL1 |
| Name of Grantee: | Crescend Technologies LLC |
| Equipment Class: | Amplifier |
| Notes: | AMPLIFIER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BQ | 90 | 406.1 - 450.0 | 50.0 | Amp | F1D |
| BQ | 90 | 406.1 - 450.0 | 50.0 | Amp | F1E |
| BQ | 90 | 406.1 - 450.0 | 50.0 | Amp | F2D |
| BQ | 90 | 406.1 - 450.0 | 50.0 | Amp | F3E |
| BQ | 90 | 406.1 - 450.0 | 50.0 | Amp | G3E |
| BQ | 90 | 406.1 - 450.0 | 50.0 | Amp | F1W |
| Power Output listed is rated conducted. Maximum conducted power output according to 90.205(s) is 60W. The antennas used for this amplifier must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of Section 1.1307(b)(3). |
| BQ: | The output power is continuously variable from the value listed in this entry to 70%-75% of the value listed. |
EAS Grant - Application CfdvUkMVJK892cTByL6BFQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Crescend Technologies LLC 140 East State Parkway Schaumburg, IL 60173 United States |
Date of Grant: 04/19/2013 Application Dated: 04/18/2013 |
| Attention: James Hougo , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CWWP5XXUL1 |
| Name of Grantee: | Crescend Technologies LLC |
| Equipment Class: | Amplifier |
| Notes: | AMPLIFIER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BQ | 90 | 406.1 - 450.0 | 50.0 | Amp | F1D |
| BQ | 90 | 406.1 - 450.0 | 50.0 | Amp | F1E |
| BQ | 90 | 406.1 - 450.0 | 50.0 | Amp | F2D |
| BQ | 90 | 406.1 - 450.0 | 50.0 | Amp | F3E |
| BQ | 90 | 406.1 - 450.0 | 50.0 | Amp | G3E |
| BQ | 90 | 406.1 - 450.0 | 50.0 | Amp | F1W |
| Power Output listed is rated conducted. Maximum conducted power output according to 90.205(s) is 60W. The antennas used for this amplifier must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of Section 1.1307(b)(3). |
| BQ: | The output power is continuously variable from the value listed in this entry to 70%-75% of the value listed. |
| Mail To: |