FCC ID DGF7100067976
WiFi and Bluetooth Module
by 3M Company
Grantee Code: DGF Product Code: 7100067976
Latest application date: 2020-06-18
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-06-18 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-06-18 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 02/03/2014 | 2020-06-10 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 02/03/2014 | 2020-06-10 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2020-06-18 | PDF 467.9 KB |
| Internal Photos | Internal Photos | 2020-06-18 | PDF 5.6 MB |
| External Photos | External Photos | 2020-06-18 | PDF 172.8 KB |
| External Photos | External Photos | 2020-06-10 | PDF 730.5 KB |
| Label Information | ID Label/Location Info | 2020-06-18 | PDF 341.1 KB |
| Label Information | ID Label/Location Info | 2020-06-10 | PDF 669.5 KB |
| FCC Cover Letter | Cover Letter(s) | 2020-06-18 | PDF 18.3 KB |
| Change in ID Authorization Letter | Cover Letter(s) | 2020-06-10 | PDF 638.8 KB |
| Change in ID Request Letter | Cover Letter(s) | 2020-06-10 | PDF 17.9 KB |
| Antenna Location | RF Exposure Info | 2020-06-18 | PDF 508.2 KB |
| SAR Report | RF Exposure Info | 2020-06-18 | PDF 2.6 MB |
Application Information
| Application ID | DBJFjBbF1qqe43FKk9Z5xg== |
|---|---|
| Final Action Date | 2020-06-18 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005881040 |
| Model | 7100067976 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | WiFi and Bluetooth Module |
| Responsible Party | Yuriy Litvinov, Lead EMC Engineer, ylitvinov@mmm.com  , 651-778-6336 |
| Test Firm | Tamara Moulton, RF Exposure Lab, LLC, tamoulton@rfexposurelab.com  , 760 471 2100 |
| TCB Email | jeff.woods@tuvsud.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change to address integration of the module into portable host 3M Clean-Trace Hygiene Monitoring device, Models LM1 and LX25. The highest reported SAR for body-worn accessory exposure condition is <0.10 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| DBJFjBbF1qqe43FKk9Z5xg== | 2020-06-18 | Class II permissive change or modification of presently authorized equipment |
| 4knrti1jGat0YcJGuwxhtQ== | 2020-06-18 | Class II permissive change or modification of presently authorized equipment |
| MfczANTqIBe6/vbRhg0u8w== | 2020-06-10 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 02/03/2014 |
| Gzv87jrvlXtpkJWWJrqi7A== | 2020-06-10 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 02/03/2014 |
Equipment Authorization
Grants
TCB Grant - Application MfczANTqIBe6/vbRhg0u8w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 06/10/2020 Application Dated: 06/10/2020 |
| 3M Company |
| 3M Center |
| Saint Paul, MN 55144 |
| Attention: Yuriy Litvinov , Lead EMC Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGF7100067976 |
| Name of Grantee: | 3M Company |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0173 |
| Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application MfczANTqIBe6/vbRhg0u8w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
3M Company 3M Center Saint Paul, MN 55144 United States |
Date of Grant: 06/10/2020 Application Dated: 06/10/2020 |
| Attention: Yuriy Litvinov , Lead EMC Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGF7100067976 |
| Name of Grantee: | 3M Company |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0173 |
| Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 06/10/2020 Application Dated: 06/10/2020 |
| 3M Company |
| 3M Center |
| Saint Paul, MN 55144 |
| Attention: Yuriy Litvinov , Lead EMC Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGF7100067976 |
| Name of Grantee: | 3M Company |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2402.0 - 2480.0 | 0.01 | ||
| MO | 15C | 2412.0 - 2462.0 | 0.2438 | ||
| MO | 15C | 2422.0 - 2452.0 | 0.1052 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.22dBi. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Gzv87jrvlXtpkJWWJrqi7A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
3M Company 3M Center Saint Paul, MN 55144 United States |
Date of Grant: 06/10/2020 Application Dated: 06/10/2020 |
| Attention: Yuriy Litvinov , Lead EMC Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGF7100067976 |
| Name of Grantee: | 3M Company |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2402.0 - 2480.0 | 0.01 | ||
| MO | 15C | 2412.0 - 2462.0 | 0.2438 | ||
| MO | 15C | 2422.0 - 2452.0 | 0.1052 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.22dBi. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 06/18/2020 Application Dated: 06/18/2020 |
| 3M Company |
| 3M Center |
| Saint Paul, MN 55144 |
| Attention: Yuriy Litvinov , Lead EMC Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGF7100067976 |
| Name of Grantee: | 3M Company |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0173 |
| Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change to address integration of the module into portable host 3M Clean-Trace Hygiene Monitoring device, Models LM1 and LX25. The highest reported SAR for body-worn accessory exposure condition is <0.10 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application DBJFjBbF1qqe43FKk9Z5xg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
3M Company 3M Center Saint Paul, MN 55144 United States |
Date of Grant: 06/18/2020 Application Dated: 06/18/2020 |
| Attention: Yuriy Litvinov , Lead EMC Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGF7100067976 |
| Name of Grantee: | 3M Company |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0173 |
| Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change to address integration of the module into portable host 3M Clean-Trace Hygiene Monitoring device, Models LM1 and LX25. The highest reported SAR for body-worn accessory exposure condition is <0.10 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 06/18/2020 Application Dated: 06/18/2020 |
| 3M Company |
| 3M Center |
| Saint Paul, MN 55144 |
| Attention: Yuriy Litvinov , Lead EMC Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGF7100067976 |
| Name of Grantee: | 3M Company |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2438 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.1052 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.22dBi. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change to address integration of the module into portable host 3M Clean-Trace Hygiene Monitoring device, Models LM1 and LX25. The highest reported SAR for body-worn accessory exposure condition is 0.24 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 4knrti1jGat0YcJGuwxhtQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
3M Company 3M Center Saint Paul, MN 55144 United States |
Date of Grant: 06/18/2020 Application Dated: 06/18/2020 |
| Attention: Yuriy Litvinov , Lead EMC Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGF7100067976 |
| Name of Grantee: | 3M Company |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2438 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.1052 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.22dBi. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change to address integration of the module into portable host 3M Clean-Trace Hygiene Monitoring device, Models LM1 and LX25. The highest reported SAR for body-worn accessory exposure condition is 0.24 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |