1. FCC ID
  2. DGF
  3. DGFLM15G11N

FCC ID DGFLM15G11N

Wi-Fi and Bluetooth Dual-Band Industrial Module

by 3M Company

Grantee Code: DGF   Product Code: LM15G11N
Latest application date: 2022-04-14

FCC ID Device Details

FCC IDDGFLM15G11N
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeDGF
Product CodeLM15G11N
Applicant Business3M Company 🇺🇸
Related Domains mmm.com
Equipment ClassWi-Fi and Bluetooth Dual-Band Industrial Module
Test FirmRF Exposure Lab, LLC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-04-14
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-04-14
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-04-14
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/20142022-04-07
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/20142022-04-07
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/20142022-04-07

Exhibits

DocumentTypeAvailableFile
Internal PhotosInternal Photos2022-04-14PDF 5.8 MB
External PhotosExternal Photos2022-04-14PDF 2.5 MB
External PhotosExternal Photos2022-04-07PDF 175.5 KB
Label InformationID Label/Location Info2022-04-14PDF 384.9 KB
Label InformationID Label/Location Info2022-04-07PDF 389.7 KB
FCC Cover LetterCover Letter(s)2022-04-14PDF 18.3 KB
Change in ID Authorization LetterCover Letter(s)2022-04-07PDF 261.4 KB
Change in ID RequestCover Letter(s)2022-04-07PDF 17.8 KB
SAR ReportRF Exposure Info2022-04-14PDF 2.1 MB

Application Information

Application IDzwqJ8zTMRUX0gqlRbSaUxg==
Final Action Date2022-04-14
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0005881040
ModelLM15G11N
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionWi-Fi and Bluetooth Dual-Band Industrial Module
Responsible PartyYuriy Litvinov, Lead EMC Engineer, ylitvinov@mmm.com , 651-778-6336
Test FirmTamara Moulton, RF Exposure Lab, LLC, tamoulton@rfexposurelab.com , 760 471 2100
TCB Emailjeff.woods@tuvsud.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. C2PC to address integration into portable host device as described in this filing. The highest reported SAR is <0.10 W/kg.

Applications

Application IDDatePurpose
zwqJ8zTMRUX0gqlRbSaUxg==2022-04-14Class II permissive change or modification of presently authorized equipment
NMtYZKaAyza40dKLTQ1qFw==2022-04-14Class II permissive change or modification of presently authorized equipment
GlXYMjhGl8QDUXnAP5QcMA==2022-04-14Class II permissive change or modification of presently authorized equipment
ngpHmXJWJZ1KtMnwzVftkg==2022-04-07Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014
nZn0IXNli+ZjXc/0c2EMqg==2022-04-07Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014
2meAIKp+HRJ8P6nJxgJQag==2022-04-07Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.014600015CCC
2402-2480 MHz0.004915CCC
2412-2462 MHz0.24315CCC
5180-5240 MHz0.038215E38, CC
5190-5230 MHz0.049915E38, CC
5260-5320 MHz0.024415E38, CC, ND
5270-5310 MHz0.052515E38, CC, ND
5500-5700 MHz0.069815E38, CC, ND
5745-5825 MHz0.061415E38, CC

Grants

TCB Grant - Application zwqJ8zTMRUX0gqlRbSaUxg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
 Date of Grant: 04/14/2022

Application Dated: 04/14/2022
3M Company
3M Center
Saint Paul, MN 55144
 
Attention: Yuriy Litvinov , Lead EMC Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DGFLM15G11N
Name of Grantee:  3M Company
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wi-Fi and Bluetooth Dual-Band Industrial Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0146  

Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

C2PC to address integration into portable host device as described in this filing. The highest reported SAR is <0.10 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application zwqJ8zTMRUX0gqlRbSaUxg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

3M Company
3M Center
Saint Paul, MN 55144
United States 		  Date of Grant: 04/14/2022

Application Dated: 04/14/2022
 
Attention: Yuriy Litvinov , Lead EMC Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DGFLM15G11N
Name of Grantee:  3M Company
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wi-Fi and Bluetooth Dual-Band Industrial Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0146  

Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

C2PC to address integration into portable host device as described in this filing. The highest reported SAR is <0.10 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application nZn0IXNli+ZjXc/0c2EMqg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
 Date of Grant: 04/07/2022

Application Dated: 04/06/2022
3M Company
3M Center
Saint Paul, MN 55144
 
Attention: Yuriy Litvinov , Lead EMC Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DGFLM15G11N
Name of Grantee:  3M Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi-Fi and Bluetooth Dual-Band Industrial Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0382  
38 CC 15E 5190.0  -  5230.0 0.0499  
38 CC ND 15E 5260.0  -  5320.0 0.0244  
38 CC ND 15E 5270.0  -  5310.0 0.0525  
38 CC ND 15E 5500.0  -  5700.0 0.0698  
38 CC 15E 5745.0  -  5825.0 0.0614  

Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application nZn0IXNli+ZjXc/0c2EMqg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

3M Company
3M Center
Saint Paul, MN 55144
United States 		  Date of Grant: 04/07/2022

Application Dated: 04/06/2022
 
Attention: Yuriy Litvinov , Lead EMC Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DGFLM15G11N
Name of Grantee:  3M Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi-Fi and Bluetooth Dual-Band Industrial Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0382  
38 CC 15E 5190.0  -  5230.0 0.0499  
38 CC ND 15E 5260.0  -  5320.0 0.0244  
38 CC ND 15E 5270.0  -  5310.0 0.0525  
38 CC ND 15E 5500.0  -  5700.0 0.0698  
38 CC 15E 5745.0  -  5825.0 0.0614  

Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application NMtYZKaAyza40dKLTQ1qFw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
 Date of Grant: 04/14/2022

Application Dated: 04/14/2022
3M Company
3M Center
Saint Paul, MN 55144
 
Attention: Yuriy Litvinov , Lead EMC Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DGFLM15G11N
Name of Grantee:  3M Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi-Fi and Bluetooth Dual-Band Industrial Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0382  
38 CC 15E 5190.0  -  5230.0 0.0499  
38 CC ND 15E 5260.0  -  5320.0 0.0244  
38 CC ND 15E 5270.0  -  5310.0 0.0525  
38 CC ND 15E 5500.0  -  5700.0 0.0698  
38 CC 15E 5745.0  -  5825.0 0.0614  

Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode.

C2PC to address integration into portable host device as described in this filing. The highest reported SAR is 0.48 W/kg.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application NMtYZKaAyza40dKLTQ1qFw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

3M Company
3M Center
Saint Paul, MN 55144
United States 		  Date of Grant: 04/14/2022

Application Dated: 04/14/2022
 
Attention: Yuriy Litvinov , Lead EMC Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DGFLM15G11N
Name of Grantee:  3M Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi-Fi and Bluetooth Dual-Band Industrial Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0382  
38 CC 15E 5190.0  -  5230.0 0.0499  
38 CC ND 15E 5260.0  -  5320.0 0.0244  
38 CC ND 15E 5270.0  -  5310.0 0.0525  
38 CC ND 15E 5500.0  -  5700.0 0.0698  
38 CC 15E 5745.0  -  5825.0 0.0614  

Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode.

C2PC to address integration into portable host device as described in this filing. The highest reported SAR is 0.48 W/kg.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application ngpHmXJWJZ1KtMnwzVftkg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
 Date of Grant: 04/07/2022

Application Dated: 04/06/2022
3M Company
3M Center
Saint Paul, MN 55144
 
Attention: Yuriy Litvinov , Lead EMC Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DGFLM15G11N
Name of Grantee:  3M Company
Equipment Class: Digital Transmission System
Notes: Wi-Fi and Bluetooth Dual-Band Industrial Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0049  
CC 15C 2412.0  -  2462.0 0.243  

Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ngpHmXJWJZ1KtMnwzVftkg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

3M Company
3M Center
Saint Paul, MN 55144
United States 		  Date of Grant: 04/07/2022

Application Dated: 04/06/2022
 
Attention: Yuriy Litvinov , Lead EMC Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DGFLM15G11N
Name of Grantee:  3M Company
Equipment Class: Digital Transmission System
Notes: Wi-Fi and Bluetooth Dual-Band Industrial Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0049  
CC 15C 2412.0  -  2462.0 0.243  

Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application GlXYMjhGl8QDUXnAP5QcMA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
 Date of Grant: 04/14/2022

Application Dated: 04/14/2022
3M Company
3M Center
Saint Paul, MN 55144
 
Attention: Yuriy Litvinov , Lead EMC Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DGFLM15G11N
Name of Grantee:  3M Company
Equipment Class: Digital Transmission System
Notes: Wi-Fi and Bluetooth Dual-Band Industrial Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0049  
CC 15C 2412.0  -  2462.0 0.243  

Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode.

C2PC to address integration into portable host device as described in this filing. The highest reported SAR is 0.27 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application GlXYMjhGl8QDUXnAP5QcMA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

3M Company
3M Center
Saint Paul, MN 55144
United States 		  Date of Grant: 04/14/2022

Application Dated: 04/14/2022
 
Attention: Yuriy Litvinov , Lead EMC Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DGFLM15G11N
Name of Grantee:  3M Company
Equipment Class: Digital Transmission System
Notes: Wi-Fi and Bluetooth Dual-Band Industrial Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0049  
CC 15C 2412.0  -  2462.0 0.243  

Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode.

C2PC to address integration into portable host device as described in this filing. The highest reported SAR is 0.27 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 2meAIKp+HRJ8P6nJxgJQag==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
 Date of Grant: 04/07/2022

Application Dated: 04/06/2022
3M Company
3M Center
Saint Paul, MN 55144
 
Attention: Yuriy Litvinov , Lead EMC Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DGFLM15G11N
Name of Grantee:  3M Company
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wi-Fi and Bluetooth Dual-Band Industrial Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0146  

Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 2meAIKp+HRJ8P6nJxgJQag==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

3M Company
3M Center
Saint Paul, MN 55144
United States 		  Date of Grant: 04/07/2022

Application Dated: 04/06/2022
 
Attention: Yuriy Litvinov , Lead EMC Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DGFLM15G11N
Name of Grantee:  3M Company
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wi-Fi and Bluetooth Dual-Band Industrial Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0146  

Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: