FCC ID DGFPSDHUB1CX
Communication Module
by 3M Company
Grantee Code: DGF Product Code: PSDHUB1CX
Latest application date: 2019-09-04
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-09-04 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-09-04 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLB1DX Grant Date: 04/27/2016 | 2019-07-18 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLB1DX Grant Date: 04/27/2016 | 2019-07-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2019-12-31 | PDF 556.8 KB |
| User Manual | Users Manual | 2019-07-18 | PDF 132.4 KB |
| Internal Photos | Internal Photos | 2019-12-31 | PDF 1.1 MB |
| External Photos | External Photos | 2019-09-04 | PDF 1.6 MB |
| External Photos | External Photos | 2019-07-18 | PDF 347.7 KB |
| Label | ID Label/Location Info | 2019-07-18 | PDF 66.2 KB |
| Confidentiality Request | Cover Letter(s) | 2019-09-04 | PDF 26.4 KB |
| FCC Cover Letter | Cover Letter(s) | 2019-09-04 | PDF 66.3 KB |
| Authorisation Letter | Cover Letter(s) | 2019-07-18 | PDF 30.5 KB |
| Request Cover Letter | Cover Letter(s) | 2019-07-18 | PDF 17.6 KB |
| SAR Report | RF Exposure Info | 2019-09-04 | PDF 2.7 MB |
Application Information
| Application ID | Cx6iqAhnJ9S9llFluufW7Q== |
|---|---|
| Final Action Date | 2019-09-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005881040 |
| Model | PSDHUB1CX |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Communication Module |
| Responsible Party | Yuriy Litvinov, Lead EMC Engineer, ylitvinov@mmm.com  , 651-778-6336 |
| Test Firm | Tamara Moulton, RF Exposure Lab, LLC, tamoulton@rfexposurelab.com  , 760 471 2100 |
| TCB Email | jeff.woods@tuvsud.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/31/2019 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change to Limited Modular Approval for portable use in the 3M Connected Safety handheld device as shown in this filing; Model number HUB-1-CX. The highest reported SAR value for Body Worn operation is: 1.29 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Cx6iqAhnJ9S9llFluufW7Q== | 2019-09-04 | Class II permissive change or modification of presently authorized equipment |
| +pRpk7Wjl3qTOfX4KbMh0A== | 2019-09-04 | Class II permissive change or modification of presently authorized equipment |
| oAHFvQlknDoDxbB1KH1wyg== | 2019-07-18 | Change in identification of presently authorized equipment. Original FCC ID: VPYLB1DX Grant Date: 04/27/2016 |
| kFtsWVxpV3yCzBvVlKUEIw== | 2019-07-18 | Change in identification of presently authorized equipment. Original FCC ID: VPYLB1DX Grant Date: 04/27/2016 |
Equipment Authorization
Grants
TCB Grant - Application oAHFvQlknDoDxbB1KH1wyg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 07/18/2019 Application Dated: 07/08/2019 |
| 3M Company |
| 3M Center |
| Saint Paul, MN 55144 |
| Attention: Yuriy Litvinov , Lead EMC Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGFPSDHUB1CX |
| Name of Grantee: | 3M Company |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application oAHFvQlknDoDxbB1KH1wyg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
3M Company 3M Center Saint Paul, MN 55144 United States |
Date of Grant: 07/18/2019 Application Dated: 07/08/2019 |
| Attention: Yuriy Litvinov , Lead EMC Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGFPSDHUB1CX |
| Name of Grantee: | 3M Company |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 07/18/2019 Application Dated: 07/08/2019 |
| 3M Company |
| 3M Center |
| Saint Paul, MN 55144 |
| Attention: Yuriy Litvinov , Lead EMC Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGFPSDHUB1CX |
| Name of Grantee: | 3M Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.174 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application kFtsWVxpV3yCzBvVlKUEIw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
3M Company 3M Center Saint Paul, MN 55144 United States |
Date of Grant: 07/18/2019 Application Dated: 07/08/2019 |
| Attention: Yuriy Litvinov , Lead EMC Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGFPSDHUB1CX |
| Name of Grantee: | 3M Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.174 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 09/04/2019 Application Dated: 09/03/2019 |
| 3M Company |
| 3M Center |
| Saint Paul, MN 55144 |
| Attention: Yuriy Litvinov , Lead EMC Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGFPSDHUB1CX |
| Name of Grantee: | 3M Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.174 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change to Limited Modular Approval for portable use in the 3M Connected Safety handheld device as shown in this filing; Model number HUB-1-CX. The highest reported SAR value for Body Worn operation is: 1.29 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Cx6iqAhnJ9S9llFluufW7Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
3M Company 3M Center Saint Paul, MN 55144 United States |
Date of Grant: 09/04/2019 Application Dated: 09/03/2019 |
| Attention: Yuriy Litvinov , Lead EMC Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGFPSDHUB1CX |
| Name of Grantee: | 3M Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.174 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change to Limited Modular Approval for portable use in the 3M Connected Safety handheld device as shown in this filing; Model number HUB-1-CX. The highest reported SAR value for Body Worn operation is: 1.29 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 09/04/2019 Application Dated: 09/03/2019 |
| 3M Company |
| 3M Center |
| Saint Paul, MN 55144 |
| Attention: Yuriy Litvinov , Lead EMC Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGFPSDHUB1CX |
| Name of Grantee: | 3M Company |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change to Limited Modular Approval for portable use in the 3M Connected Safety handheld device as shown in this filing; Model number HUB-1-CX. The highest reported SAR value for Body Worn operation is: 0.76 W/kg.. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +pRpk7Wjl3qTOfX4KbMh0A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
3M Company 3M Center Saint Paul, MN 55144 United States |
Date of Grant: 09/04/2019 Application Dated: 09/03/2019 |
| Attention: Yuriy Litvinov , Lead EMC Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGFPSDHUB1CX |
| Name of Grantee: | 3M Company |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change to Limited Modular Approval for portable use in the 3M Connected Safety handheld device as shown in this filing; Model number HUB-1-CX. The highest reported SAR value for Body Worn operation is: 0.76 W/kg.. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |