FCC ID DGIAX210NG

FCC ID	DGIAX210NG
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	DGI
Product Code	AX210NG
Applicant Business	Inventec Corporation 🇹🇼
Related Domains	inventec.com mrt-cert.com
Equipment Class	Intel Wi-Fi 6E AX210
Test Firm	MRT Technology (Taiwan) Co.,Ltd

Frequency Range	Application Purpose	Final Action Date
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2024-05-09
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2024-05-09
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2024-05-09
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2022-07-21
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2022-07-21
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2022-07-20
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2022-01-24
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2022-01-24
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2022-01-24
2402-2480 MHz	Change in identification of presently authorized equipment. Original FCC ID: PD9AX210NG Grant Date: 10/19/2020	2021-12-06
2402-2480 MHz	Change in identification of presently authorized equipment. Original FCC ID: PD9AX210NG Grant Date: 10/19/2020	2021-12-06
5955-7115 MHz	Change in identification of presently authorized equipment. Original FCC ID: PD9AX210NG Grant Date: 02/18/2021	2021-12-06
5180-5240 MHz	Change in identification of presently authorized equipment. Original FCC ID: PD9AX210NG Grant Date: 10/19/2020	2021-12-06

Document	Type	Available	File
Users Manual	Users Manual	2024-05-09	PDF 1.4 MB
Users Manual	Users Manual	2022-07-21	PDF 1.1 MB
Users Manual	Users Manual	2022-01-24	PDF 1.5 MB
AX210NGW-User manual	Users Manual	2021-12-06	PDF 232.7 KB
Internal Photos	Internal Photos	2022-07-21	PDF 4.9 MB
Internal Photos	Internal Photos	2022-01-24	PDF 2.6 MB
External Photos	External Photos	2022-07-21	PDF 941.8 KB
External Photos	External Photos	2022-01-24	PDF 242.6 KB
AX210NGW- Expho_20211202	External Photos	2021-12-06	PDF 442.4 KB
ID Label/Location Info	ID Label/Location Info	2024-05-09	PDF 282.4 KB
ID Label/Location Info	ID Label/Location Info	2022-07-21	PDF 122.1 KB
ID Label/Location Info	ID Label/Location Info	2022-01-24	PDF 156.3 KB
AX210NGW- LABEL and Location	ID Label/Location Info	2021-12-06	PDF 390.8 KB
Test Setup Photos_SAR	Test Setup Photos	2024-05-09	PDF 1.3 MB
Test Setup Photos_SAR	Test Setup Photos	2022-07-21	PDF 91.8 KB
Test Setup Photos	Test Setup Photos	2022-01-24	PDF 64.2 KB
Antenna Specification	Test Report	2024-05-09	PDF 1.8 MB
Test Report_SAR	RF Exposure Info	2024-05-09	PDF 3.1 MB
Test Report_SAR_Annex E-Equipment Calibration Report	RF Exposure Info	2024-05-09	PDF 4.3 MB
Antenna Specification_aux	Test Report	2022-07-21	PDF 909.5 KB
Antenna Specification_main	Test Report	2022-07-21	PDF 837.8 KB
Test Report_SAR	RF Exposure Info	2022-07-21	PDF 2.1 MB
Test Report_SAR_ Annex E	RF Exposure Info	2022-07-21	PDF 3.6 MB
Test Report_SAR	RF Exposure Info	2022-01-24	PDF 1.8 MB
Agent Letter_A_for Service of Process_FCC_Attestation Statements	Attestation Statements	2024-05-09	PDF 318.1 KB
Attestation_FCC_Application Letter	Attestation Statements	2024-05-09	PDF 289.6 KB
Confidentiality	Cover Letter(s)	2024-05-09	PDF 329.3 KB
Declaration of authorization	Cover Letter(s)	2024-05-09	PDF 185.8 KB
FCC Class II permissive change letter	Cover Letter(s)	2024-05-09	PDF 249 KB
Confidentiality	Cover Letter(s)	2022-07-21	PDF 78.7 KB
Declaration of authorization	Cover Letter(s)	2022-07-21	PDF 53.6 KB
FCC Class II permissive change letter	Cover Letter(s)	2022-07-21	PDF 107.8 KB
Class II permissive change letter	Cover Letter(s)	2022-01-24	PDF 98.9 KB
Confidentiality	Cover Letter(s)	2022-01-24	PDF 85.2 KB
Declaration of authorization	Cover Letter(s)	2022-01-24	PDF 94.7 KB
AX210NGW- Confidentiality Request_20210713_confirmed	Cover Letter(s)	2021-12-06	PDF 156.9 KB
AX210NGW- Declaration letter for electrically identical_20211202	Cover Letter(s)	2021-12-06	PDF 309 KB
AX210NGW- Declaration of authorization_confirmed	Cover Letter(s)	2021-12-06	PDF 122.9 KB
FCC Auth Ltr Change of ID_AX210NGW_Inventec_DGIAX210NG	Cover Letter(s)	2021-12-06	PDF 88.8 KB
Annex E - Equipment Calibration Report_1	RF Exposure Info	2022-01-24	PDF 5.9 MB
Annex E - Equipment Calibration Report_2	RF Exposure Info	2022-01-24	PDF 5.6 MB
Annex E - Equipment Calibration Report_3	RF Exposure Info	2022-01-24	PDF 2.1 MB
Block Diagram Metadata only	Block Diagram		PDF 218.2 KB
Block Diagram Metadata only	Block Diagram		PDF 122.4 KB
Block Diagram Metadata only	Block Diagram		PDF 130.3 KB
Schematics Metadata only	Schematics		PDF 4.5 MB
Schematics Metadata only	Schematics		PDF 2.7 MB
Schematics Metadata only	Schematics		PDF 1.6 MB
Operational Description Metadata only	Operational Description		PDF 198 KB
Operational Description Metadata only	Operational Description		PDF 187.3 KB
Operational Description Metadata only	Operational Description		PDF 183.5 KB
Confidential_AX210NGW- Software Security Description_FCC_ Metadata only	SDR Software/Security Inf		PDF 436.4 KB

Application ID	y6ssUM+TkCIFCvJFcND+jQ==
Final Action Date	2024-05-09
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0015893373
Model	AX210NG
Frequency Range	5180-5240 MHz
Equipment Class	NII - Unlicensed National Information Infrastructure TX
Device Description	Intel Wi-Fi 6E AX210
Responsible Party	Francis Lin, AM, lin.francis@inventec.com , 886-2-2881-0721
Agent	Chenz Chenz Chenz, MRT Technology (Taiwan) Co.,Ltd, chenzker@mrt-cert.com , 886-3-3288388
Technical Contact	Chenz Ker, MRT Technology (Taiwan) Co., Ltd, chenzker@mrt-cert.com , 886-3-3288388
Non-Technical Contact	Chenz Ker, MRT Technology (Taiwan) Co., Ltd, chenzker@mrt-cert.com , 886-3-3288388
Test Firm	Chenz Ker, MRT Technology (Taiwan) Co.,Ltd, chenzker@mrt-cert.com , +886-3-328-8388
TCB Email	certification@telefication.com
TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term Confidentiality	No
Long-Term Confidentiality	Yes
Grant Deferral	No
Modular Equipment	Single Modular Approval
Composite Device	Yes
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Class II permissive change : This changes are (1) to allow the configuration in a Panel PC (Brand : Inventec, Model number : MOMI13) with less gain of the equivalent type antenna (Brand : INPAQ, Part No : WA-F-LE-02-044 (Main),WA-F-LE-01-007 (Aux)), (2) to reduced power, and (3) to disable the function of Wi-Fi 6E by firmware modification as described in this filing. The highest reported SAR value for Body and simultaneous use condition are 1.18 W/kg, and 1.57 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13 mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

Application ID	Date	Purpose
y6ssUM+TkCIFCvJFcND+jQ==	2024-05-09	Class II permissive change or modification of presently authorized equipment
nwDSYpQKc87D6bjA/0YoTQ==	2024-05-09	Class II permissive change or modification of presently authorized equipment
+5uRqajDyMHP0zGYu/HkjQ==	2024-05-09	Class II permissive change or modification of presently authorized equipment
wV05f8XCYp6qak7keMSgcQ==	2022-07-21	Class II permissive change or modification of presently authorized equipment
kEQyOJrjgJ67xUps+XeTeQ==	2022-07-21	Class II permissive change or modification of presently authorized equipment
rVxSmjjN6emmZ00qqlh0rg==	2022-07-20	Class II permissive change or modification of presently authorized equipment
Hfba+2HDvgFg9UgBLMGHQg==	2022-01-24	Class II permissive change or modification of presently authorized equipment
7ko39SA4HbA+boonWPiz7Q==	2022-01-24	Class II permissive change or modification of presently authorized equipment
2dgArj99QqnTNicOSBD6pA==	2022-01-24	Class II permissive change or modification of presently authorized equipment
yj9dQhS5MH4O9bn9oW3dTA==	2021-12-06	Change in identification of presently authorized equipment. Original FCC ID: PD9AX210NG Grant Date: 10/19/2020
VXbDFoDxMr9tSFIFuC1hvQ==	2021-12-06	Change in identification of presently authorized equipment. Original FCC ID: PD9AX210NG Grant Date: 10/19/2020
SW5zj2tiJCtIDzhxUAxpCw==	2021-12-06	Change in identification of presently authorized equipment. Original FCC ID: PD9AX210NG Grant Date: 10/19/2020
Lf0pVgPXe8qaZS+G2CrXGA==	2021-12-06	Change in identification of presently authorized equipment. Original FCC ID: PD9AX210NG Grant Date: 02/18/2021
9W6dUzOT3p4GklxlM6P5cQ==	2021-12-06	Change in identification of presently authorized equipment. Original FCC ID: PD9AX210NG Grant Date: 10/19/2020

Frequency	Output	Rules	Grant Notes
		15B	CC
2402-2480 MHz	0.0140000	15C	CC
2402-2480 MHz	0.01	15C	CC
2412-2472 MHz	0.792	15C	CC, MO
2422-2462 MHz	0.602	15C	CC, MO
5190-5230 MHz	0.199	15E	CC, MO
5210 MHz	0.089	15E	CC, MO
5250 MHz	0.061	15E	CC, MO
5260-5320 MHz	0.165	15E	CC, MO, ND
5270-5310 MHz	0.153	15E	CC, MO, ND
5290 MHz	0.084	15E	CC, MO, ND
5500-5700 MHz	0.245	15E	CC, MO, ND
5530-5690 MHz	0.228	15E	CC, MO, ND
5710 MHz	0.249	15E	CC, MO, ND
5720 MHz	0.134	15E	CC, MO, ND
5745-5825 MHz	0.262	15E	CC, MO
5755-5795 MHz	0.27	15E	CC, MO
5775 MHz	0.195	15E	CC, MO
5955-7115 MHz	0.003	15E	CC, MO
5965-7085 MHz	0.007	15E	CC, MO
5985-7025 MHz	0.013	15E	CC, MO
6025-6985 MHz	0.026	15E	CC, MO

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 12/06/2021

Application Dated: 12/02/2021

Inventec Corporation

Inventa Bldg 66 Hou-Kang St

Shih-Lin District

Taipei,
Taiwan

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15B	-

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Inventec Corporation
Inventa Bldg 66 Hou-Kang St Shih-Lin District
Taipei,
Taiwan

Date of Grant: 12/06/2021

Application Dated: 12/02/2021

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15B	-

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application y6ssUM+TkCIFCvJFcND+jQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Kiwa Nederland B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands

Date of Grant: 05/09/2024

Application Dated: 05/08/2024

Inventec Corporation

No. 66, Hougang St., Shihlin Dist.,

Shih-Lin District

Taipei, 111059
Taiwan

Attention: Francis Lin , AM

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.166
CC MO	15E	5190.0 - 5230.0	0.199
CC MO	15E	5210.0 - 5210.0	0.089
CC MO	15E	5250.0 - 5250.0	0.061
CC MO ND	15E	5260.0 - 5320.0	0.165
CC MO ND	15E	5270.0 - 5310.0	0.153
CC MO ND	15E	5290.0 - 5290.0	0.084
CC MO ND	15E	5500.0 - 5700.0	0.245
CC MO ND	15E	5710.0 - 5710.0	0.249
CC MO ND	15E	5720.0 - 5720.0	0.134
CC MO ND	15E	5530.0 - 5690.0	0.228
CC MO	15E	5745.0 - 5825.0	0.262
CC MO	15E	5755.0 - 5795.0	0.27
CC MO	15E	5775.0 - 5775.0	0.195

Class II permissive change : This changes are (1) to allow the configuration in a Panel PC (Brand : Inventec, Model number : MOMI13) with less gain of the equivalent type antenna (Brand : INPAQ, Part No : WA-F-LE-02-044 (Main),WA-F-LE-01-007 (Aux)), (2) to reduced power, and (3) to disable the function of Wi-Fi 6E by firmware modification as described in this filing.

The highest reported SAR value for Body and simultaneous use condition are 1.18 W/kg, and 1.57 W/kg, respectively.

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.57 W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13 mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Inventec Corporation
No. 66, Hougang St., Shihlin Dist., Shih-Lin District
Taipei, 111059
Taiwan

Date of Grant: 05/09/2024

Application Dated: 05/08/2024

Attention: Francis Lin , AM

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.166
CC MO	15E	5190.0 - 5230.0	0.199
CC MO	15E	5210.0 - 5210.0	0.089
CC MO	15E	5250.0 - 5250.0	0.061
CC MO ND	15E	5260.0 - 5320.0	0.165
CC MO ND	15E	5270.0 - 5310.0	0.153
CC MO ND	15E	5290.0 - 5290.0	0.084
CC MO ND	15E	5500.0 - 5700.0	0.245
CC MO ND	15E	5710.0 - 5710.0	0.249
CC MO ND	15E	5720.0 - 5720.0	0.134
CC MO ND	15E	5530.0 - 5690.0	0.228
CC MO	15E	5745.0 - 5825.0	0.262
CC MO	15E	5755.0 - 5795.0	0.27
CC MO	15E	5775.0 - 5775.0	0.195

Class II permissive change : This changes are (1) to allow the configuration in a Panel PC (Brand : Inventec, Model number : MOMI13) with less gain of the equivalent type antenna (Brand : INPAQ, Part No : WA-F-LE-02-044 (Main),WA-F-LE-01-007 (Aux)), (2) to reduced power, and (3) to disable the function of Wi-Fi 6E by firmware modification as described in this filing.

The highest reported SAR value for Body and simultaneous use condition are 1.18 W/kg, and 1.57 W/kg, respectively.

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.57 W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13 mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application wV05f8XCYp6qak7keMSgcQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands

Date of Grant: 07/21/2022

Application Dated: 07/19/2022

Inventec Corporation

Inventa Bldg 66 Hou-Kang St

Shih-Lin District

Taipei,
Taiwan

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Digital Transmission System
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.01
CC MO	15C	2412.0 - 2472.0	0.792
CC MO	15C	2422.0 - 2462.0	0.602

Class II permissive change : This change is to allow the configuration in the specific host (Panel PC, M215T) with less gain of the equivalent type antenna (AWAN, Part No: AYP6Y-100135 (Main), AYP6Y-100136 (Aux)), and reduced power as described in this filing. The highest reported SAR value for product specific and simultaneous use condition are 1.86 W/kg (10g), and 3.31 W/kg (10g), respectively.

Power Output listed is conducted. Modular Approval. Power output has been reduced atthe upper bandedge channels as shown in filings under this FCC ID. The antenna(s) usedfor this transmitter must not transmit simultaneously with any other antenna or transmitter,except in accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable contigurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 Supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. OEM/Hostintegrator must be provided with antenna installation instructions and transmitter operatingconditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Crossreference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Inventec Corporation
Inventa Bldg 66 Hou-Kang St Shih-Lin District
Taipei,
Taiwan

Date of Grant: 07/21/2022

Application Dated: 07/19/2022

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Digital Transmission System
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.01
CC MO	15C	2412.0 - 2472.0	0.792
CC MO	15C	2422.0 - 2462.0	0.602

Class II permissive change : This change is to allow the configuration in the specific host (Panel PC, M215T) with less gain of the equivalent type antenna (AWAN, Part No: AYP6Y-100135 (Main), AYP6Y-100136 (Aux)), and reduced power as described in this filing. The highest reported SAR value for product specific and simultaneous use condition are 1.86 W/kg (10g), and 3.31 W/kg (10g), respectively.

Power Output listed is conducted. Modular Approval. Power output has been reduced atthe upper bandedge channels as shown in filings under this FCC ID. The antenna(s) usedfor this transmitter must not transmit simultaneously with any other antenna or transmitter,except in accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable contigurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 Supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. OEM/Hostintegrator must be provided with antenna installation instructions and transmitter operatingconditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Crossreference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application VXbDFoDxMr9tSFIFuC1hvQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 12/06/2021

Application Dated: 12/02/2021

Inventec Corporation

Inventa Bldg 66 Hou-Kang St

Shih-Lin District

Taipei,
Taiwan

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Digital Transmission System
Notes:	Single Modular Approval
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.01
CC MO	15C	2412.0 - 2472.0	0.792
CC MO	15C	2422.0 - 2462.0	0.602

Power Output listed is conducted. Modular Approval. Power output has been reduced atthe upper bandedge channels as shown in filings under this FCC ID. The antenna(s) usedfor this transmitter must not transmit simultaneously with any other antenna or transmitter,except in accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 Supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. OEM/Hostintegrator must be provided with antenna installation instructions and transmitter operatingconditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 13mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Inventec Corporation
Inventa Bldg 66 Hou-Kang St Shih-Lin District
Taipei,
Taiwan

Date of Grant: 12/06/2021

Application Dated: 12/02/2021

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Digital Transmission System
Notes:	Single Modular Approval
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.01
CC MO	15C	2412.0 - 2472.0	0.792
CC MO	15C	2422.0 - 2462.0	0.602

Power Output listed is conducted. Modular Approval. Power output has been reduced atthe upper bandedge channels as shown in filings under this FCC ID. The antenna(s) usedfor this transmitter must not transmit simultaneously with any other antenna or transmitter,except in accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 Supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. OEM/Hostintegrator must be provided with antenna installation instructions and transmitter operatingconditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 13mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application SW5zj2tiJCtIDzhxUAxpCw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 12/06/2021

Application Dated: 12/02/2021

Inventec Corporation

Inventa Bldg 66 Hou-Kang St

Shih-Lin District

Taipei,
Taiwan

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.014

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.02W/kg and 1.57W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 13mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Inventec Corporation
Inventa Bldg 66 Hou-Kang St Shih-Lin District
Taipei,
Taiwan

Date of Grant: 12/06/2021

Application Dated: 12/02/2021

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.014

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.02W/kg and 1.57W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 13mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application rVxSmjjN6emmZ00qqlh0rg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands

Date of Grant: 07/20/2022

Application Dated: 07/19/2022

Inventec Corporation

Inventa Bldg 66 Hou-Kang St

Shih-Lin District

Taipei,
Taiwan

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.014

Class II permissive change : This change is to allow the configuration in the specific host (Panel PC, M215T) with less gain of the equivalent type antenna (AWAN, Part No: AYP6Y-100135 (Main), AYP6Y-100136 (Aux)), and reduced power as described in this filing. The highest reported SAR value for product specific and simultaneous use condition are 0.10 W/kg (10g), and 3.13 W/kg (10g), respectively.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.02W/kg and 1.57Wikg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Inventec Corporation
Inventa Bldg 66 Hou-Kang St Shih-Lin District
Taipei,
Taiwan

Date of Grant: 07/20/2022

Application Dated: 07/19/2022

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.014

Class II permissive change : This change is to allow the configuration in the specific host (Panel PC, M215T) with less gain of the equivalent type antenna (AWAN, Part No: AYP6Y-100135 (Main), AYP6Y-100136 (Aux)), and reduced power as described in this filing. The highest reported SAR value for product specific and simultaneous use condition are 0.10 W/kg (10g), and 3.13 W/kg (10g), respectively.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.02W/kg and 1.57Wikg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application nwDSYpQKc87D6bjA/0YoTQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Kiwa Nederland B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands

Date of Grant: 05/09/2024

Application Dated: 05/08/2024

Inventec Corporation

No. 66, Hougang St., Shihlin Dist.,

Shih-Lin District

Taipei, 111059
Taiwan

Attention: Francis Lin , AM

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.014

Class II permissive change : This changes are (1) to allow the configuration in a Panel PC (Brand : Inventec, Model number : MOMI13) with less gain of the equivalent type antenna (Brand : INPAQ, Part No : WA-F-LE-02-044 (Main),WA-F-LE-01-007 (Aux)), (2) to reduced power, and (3) to disable the function of Wi-Fi 6E by firmware modification as described in this filing.

The highest reported SAR value for Body and simultaneous use condition are 0.17 W/kg, and 1.31 W/kg, respectively.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02 W/kg and 1.57 W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13 mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Inventec Corporation
No. 66, Hougang St., Shihlin Dist., Shih-Lin District
Taipei, 111059
Taiwan

Date of Grant: 05/09/2024

Application Dated: 05/08/2024

Attention: Francis Lin , AM

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.014

Class II permissive change : This changes are (1) to allow the configuration in a Panel PC (Brand : Inventec, Model number : MOMI13) with less gain of the equivalent type antenna (Brand : INPAQ, Part No : WA-F-LE-02-044 (Main),WA-F-LE-01-007 (Aux)), (2) to reduced power, and (3) to disable the function of Wi-Fi 6E by firmware modification as described in this filing.

The highest reported SAR value for Body and simultaneous use condition are 0.17 W/kg, and 1.31 W/kg, respectively.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02 W/kg and 1.57 W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13 mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Lf0pVgPXe8qaZS+G2CrXGA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 12/06/2021

Application Dated: 12/02/2021

Inventec Corporation

Inventa Bldg 66 Hou-Kang St

Shih-Lin District

Taipei,
Taiwan

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	15E 6 GHz Low Power Indoor Client
Notes:	Single Modular Approval
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5955.0 - 7115.0	0.003
CC MO	15E	5965.0 - 7085.0	0.007
CC MO	15E	5985.0 - 7025.0	0.013
CC MO	15E	6025.0 - 6985.0	0.026

Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. Power Densityand SAR testing was performed to demonstrate RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively.

This module is approved in portable/mobile configurations with antenna Intel Antenna, TypePIFA at 13mm minimum test separation distance.

Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in thisfiling. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Inventec Corporation
Inventa Bldg 66 Hou-Kang St Shih-Lin District
Taipei,
Taiwan

Date of Grant: 12/06/2021

Application Dated: 12/02/2021

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	15E 6 GHz Low Power Indoor Client
Notes:	Single Modular Approval
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5955.0 - 7115.0	0.003
CC MO	15E	5965.0 - 7085.0	0.007
CC MO	15E	5985.0 - 7025.0	0.013
CC MO	15E	6025.0 - 6985.0	0.026

Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. Power Densityand SAR testing was performed to demonstrate RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively.

This module is approved in portable/mobile configurations with antenna Intel Antenna, TypePIFA at 13mm minimum test separation distance.

Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in thisfiling. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application kEQyOJrjgJ67xUps+XeTeQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands

Date of Grant: 07/21/2022

Application Dated: 07/19/2022

Inventec Corporation

Inventa Bldg 66 Hou-Kang St

Shih-Lin District

Taipei,
Taiwan

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.166
CC MO	15E	5190.0 - 5230.0	0.199
CC MO	15E	5210.0 - 5210.0	0.089
CC MO	15E	5250.0 - 5250.0	0.061
CC MO ND	15E	5260.0 - 5320.0	0.165
CC MO ND	15E	5270.0 - 5310.0	0.153
CC MO ND	15E	5290.0 - 5290.0	0.084
CC MO ND	15E	5500.0 - 5700.0	0.245
CC MO ND	15E	5710.0 - 5710.0	0.249
CC MO ND	15E	5720.0 - 5720.0	0.134
CC MO ND	15E	5530.0 - 5690.0	0.228
CC MO	15E	5745.0 - 5825.0	0.262
CC MO	15E	5755.0 - 5795.0	0.27
CC MO	15E	5775.0 - 5775.0	0.195

Class II permissive change : This change is to allow the configuration in the specific host (Panel PC, M215T) with less gain of the equivalent type antenna (AWAN, Part No: AYP6Y-100135 (Main), AYP6Y-100136 (Aux)), and reduced power as described in this filing. The highest reported SAR value for product specific and simultaneous use condition are 3.03 W/kg (10g), and 3.31 W/kg (10g), respectively.

Power Output listed is conducted. Modular Approval. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures.Gatee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. Thistransmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided withantenna installation instructions and transmitter operating conditions to satisfy RF exposurecompliance. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Inventec Corporation
Inventa Bldg 66 Hou-Kang St Shih-Lin District
Taipei,
Taiwan

Date of Grant: 07/21/2022

Application Dated: 07/19/2022

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.166
CC MO	15E	5190.0 - 5230.0	0.199
CC MO	15E	5210.0 - 5210.0	0.089
CC MO	15E	5250.0 - 5250.0	0.061
CC MO ND	15E	5260.0 - 5320.0	0.165
CC MO ND	15E	5270.0 - 5310.0	0.153
CC MO ND	15E	5290.0 - 5290.0	0.084
CC MO ND	15E	5500.0 - 5700.0	0.245
CC MO ND	15E	5710.0 - 5710.0	0.249
CC MO ND	15E	5720.0 - 5720.0	0.134
CC MO ND	15E	5530.0 - 5690.0	0.228
CC MO	15E	5745.0 - 5825.0	0.262
CC MO	15E	5755.0 - 5795.0	0.27
CC MO	15E	5775.0 - 5775.0	0.195

Class II permissive change : This change is to allow the configuration in the specific host (Panel PC, M215T) with less gain of the equivalent type antenna (AWAN, Part No: AYP6Y-100135 (Main), AYP6Y-100136 (Aux)), and reduced power as described in this filing. The highest reported SAR value for product specific and simultaneous use condition are 3.03 W/kg (10g), and 3.31 W/kg (10g), respectively.

Power Output listed is conducted. Modular Approval. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures.Gatee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. Thistransmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided withantenna installation instructions and transmitter operating conditions to satisfy RF exposurecompliance. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application Hfba+2HDvgFg9UgBLMGHQg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands

Date of Grant: 01/24/2022

Application Dated: 01/05/2022

Inventec Corporation

Inventa Bldg 66 Hou-Kang St

Shih-Lin District

Taipei,
Taiwan

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Digital Transmission System
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.01
CC MO	15C	2412.0 - 2472.0	0.792
CC MO	15C	2422.0 - 2462.0	0.602

C2PC: Additional Chass is added. Product name: Panel PC, Model number: M240. Reduce WiFi output power. The highest reported SAR values for extremity, simultaneous exposure use conditions are 2.19 (W/Kg) (10g) and 4.15 (W/Kg) (10g). Power Output listed is conducted. Modular Approval. Power output has been reduced atthe upper bandedge channels as shown in filings under this FCC ID. The antenna(s) usedfor this transmitter must not transmit simultaneously with any other antenna or transmitter,except in accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable contigurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 Supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. OEM/Hostintegrator must be provided with antenna installation instructions and transmitter operatingconditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Crossreference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Inventec Corporation
Inventa Bldg 66 Hou-Kang St Shih-Lin District
Taipei,
Taiwan

Date of Grant: 01/24/2022

Application Dated: 01/05/2022

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Digital Transmission System
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.01
CC MO	15C	2412.0 - 2472.0	0.792
CC MO	15C	2422.0 - 2462.0	0.602

C2PC: Additional Chass is added. Product name: Panel PC, Model number: M240. Reduce WiFi output power. The highest reported SAR values for extremity, simultaneous exposure use conditions are 2.19 (W/Kg) (10g) and 4.15 (W/Kg) (10g). Power Output listed is conducted. Modular Approval. Power output has been reduced atthe upper bandedge channels as shown in filings under this FCC ID. The antenna(s) usedfor this transmitter must not transmit simultaneously with any other antenna or transmitter,except in accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable contigurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 Supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. OEM/Hostintegrator must be provided with antenna installation instructions and transmitter operatingconditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Crossreference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 9W6dUzOT3p4GklxlM6P5cQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 12/06/2021

Application Dated: 12/02/2021

Inventec Corporation

Inventa Bldg 66 Hou-Kang St

Shih-Lin District

Taipei,
Taiwan

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.166
CC MO	15E	5190.0 - 5230.0	0.199
CC MO	15E	5210.0 - 5210.0	0.089
CC MO	15E	5250.0 - 5250.0	0.061
CC MO ND	15E	5260.0 - 5320.0	0.165
CC MO ND	15E	5270.0 - 5310.0	0.153
CC MO ND	15E	5290.0 - 5290.0	0.084
CC MO ND	15E	5500.0 - 5700.0	0.245
CC MO ND	15E	5710.0 - 5710.0	0.249
CC MO ND	15E	5720.0 - 5720.0	0.134
CC MO ND	15E	5530.0 - 5690.0	0.228
CC MO	15E	5745.0 - 5825.0	0.262
CC MO	15E	5755.0 - 5795.0	0.27
CC MO	15E	5775.0 - 5775.0	0.195

Power Output listed is conducted. Modular Approval. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. Thistransmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided withantenna installation instructions and transmitter operating conditions to satisfy RF exposurecompliance. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 13mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Inventec Corporation
Inventa Bldg 66 Hou-Kang St Shih-Lin District
Taipei,
Taiwan

Date of Grant: 12/06/2021

Application Dated: 12/02/2021

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.166
CC MO	15E	5190.0 - 5230.0	0.199
CC MO	15E	5210.0 - 5210.0	0.089
CC MO	15E	5250.0 - 5250.0	0.061
CC MO ND	15E	5260.0 - 5320.0	0.165
CC MO ND	15E	5270.0 - 5310.0	0.153
CC MO ND	15E	5290.0 - 5290.0	0.084
CC MO ND	15E	5500.0 - 5700.0	0.245
CC MO ND	15E	5710.0 - 5710.0	0.249
CC MO ND	15E	5720.0 - 5720.0	0.134
CC MO ND	15E	5530.0 - 5690.0	0.228
CC MO	15E	5745.0 - 5825.0	0.262
CC MO	15E	5755.0 - 5795.0	0.27
CC MO	15E	5775.0 - 5775.0	0.195

Power Output listed is conducted. Modular Approval. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. Thistransmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided withantenna installation instructions and transmitter operating conditions to satisfy RF exposurecompliance. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 13mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 7ko39SA4HbA+boonWPiz7Q==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands

Date of Grant: 01/24/2022

Application Dated: 01/05/2022

Inventec Corporation

Inventa Bldg 66 Hou-Kang St

Shih-Lin District

Taipei,
Taiwan

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.166
CC MO	15E	5190.0 - 5230.0	0.199
CC MO	15E	5210.0 - 5210.0	0.089
CC MO	15E	5250.0 - 5250.0	0.061
CC MO ND	15E	5260.0 - 5320.0	0.165
CC MO ND	15E	5270.0 - 5310.0	0.153
CC MO ND	15E	5290.0 - 5290.0	0.084
CC MO ND	15E	5500.0 - 5700.0	0.245
CC MO ND	15E	5710.0 - 5710.0	0.249
CC MO ND	15E	5720.0 - 5720.0	0.134
CC MO ND	15E	5530.0 - 5690.0	0.228
CC MO	15E	5745.0 - 5825.0	0.262
CC MO	15E	5755.0 - 5795.0	0.27
CC MO	15E	5775.0 - 5775.0	0.195

C2PC: Additional Chass is added. Product name: Panel PC, Model number: M240. Reduce WiFi output power. The highest reported SAR values for extremity, simultaneous exposure use conditions are 3.53 (W/Kg) (10g) and 6.69 (W/Kg) (10g). Power Output listed is conducted. Modular Approval. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi- transmitter product procedures.Gatee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. Thistransmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided withantenna installation instructions and transmitter operating conditions to satisfy RF exposurecompliance. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Inventec Corporation
Inventa Bldg 66 Hou-Kang St Shih-Lin District
Taipei,
Taiwan

Date of Grant: 01/24/2022

Application Dated: 01/05/2022

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.166
CC MO	15E	5190.0 - 5230.0	0.199
CC MO	15E	5210.0 - 5210.0	0.089
CC MO	15E	5250.0 - 5250.0	0.061
CC MO ND	15E	5260.0 - 5320.0	0.165
CC MO ND	15E	5270.0 - 5310.0	0.153
CC MO ND	15E	5290.0 - 5290.0	0.084
CC MO ND	15E	5500.0 - 5700.0	0.245
CC MO ND	15E	5710.0 - 5710.0	0.249
CC MO ND	15E	5720.0 - 5720.0	0.134
CC MO ND	15E	5530.0 - 5690.0	0.228
CC MO	15E	5745.0 - 5825.0	0.262
CC MO	15E	5755.0 - 5795.0	0.27
CC MO	15E	5775.0 - 5775.0	0.195

C2PC: Additional Chass is added. Product name: Panel PC, Model number: M240. Reduce WiFi output power. The highest reported SAR values for extremity, simultaneous exposure use conditions are 3.53 (W/Kg) (10g) and 6.69 (W/Kg) (10g). Power Output listed is conducted. Modular Approval. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi- transmitter product procedures.Gatee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. Thistransmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided withantenna installation instructions and transmitter operating conditions to satisfy RF exposurecompliance. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 2dgArj99QqnTNicOSBD6pA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands

Date of Grant: 01/24/2022

Application Dated: 01/05/2022

Inventec Corporation

Inventa Bldg 66 Hou-Kang St

Shih-Lin District

Taipei,
Taiwan

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.014

C2PC: Additional Chass is added. Product name: Panel PC, Model number: M240. Reduce WiFi output power. The highest reported SAR values for extremity, simultaneous exposure use conditions are 0.20 (W/Kg) (10g) and 3.73 (W/Kg) (10g). Power Output listed is conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.02W/kg and 1.57Wikg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Inventec Corporation
Inventa Bldg 66 Hou-Kang St Shih-Lin District
Taipei,
Taiwan

Date of Grant: 01/24/2022

Application Dated: 01/05/2022

Attention: Laurent Lin

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.014

C2PC: Additional Chass is added. Product name: Panel PC, Model number: M240. Reduce WiFi output power. The highest reported SAR values for extremity, simultaneous exposure use conditions are 0.20 (W/Kg) (10g) and 3.73 (W/Kg) (10g). Power Output listed is conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.02W/kg and 1.57Wikg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application +5uRqajDyMHP0zGYu/HkjQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Kiwa Nederland B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands

Date of Grant: 05/09/2024

Application Dated: 05/08/2024

Inventec Corporation

No. 66, Hougang St., Shihlin Dist.,

Shih-Lin District

Taipei, 111059
Taiwan

Attention: Francis Lin , AM

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Digital Transmission System
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.01
CC MO	15C	2412.0 - 2472.0	0.792
CC MO	15C	2422.0 - 2462.0	0.602

Class II permissive change : This changes are (1) to allow the configuration in a Panel PC (Brand : Inventec, Model number : MOMI13) with less gain of the equivalent type antenna (Brand : INPAQ, Part No : WA-F-LE-02-044 (Main),WA-F-LE-01-007 (Aux)), (2) to reduced power, and (3) to disable the function of Wi-Fi 6E by firmware modification as described in this filing.

The highest reported SAR value for Body and simultaneous use condition are 1.03 W/kg, and 1.20 W/kg, respectively.

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59 W/kg and 1.57 W/kg, respectively.

This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 13 mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Inventec Corporation
No. 66, Hougang St., Shihlin Dist., Shih-Lin District
Taipei, 111059
Taiwan

Date of Grant: 05/09/2024

Application Dated: 05/08/2024

Attention: Francis Lin , AM

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	DGIAX210NG

Name of Grantee:	Inventec Corporation

Equipment Class:	Digital Transmission System
Notes:	Intel Wi-Fi 6E AX210
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.01
CC MO	15C	2412.0 - 2472.0	0.792
CC MO	15C	2422.0 - 2462.0	0.602

Class II permissive change : This changes are (1) to allow the configuration in a Panel PC (Brand : Inventec, Model number : MOMI13) with less gain of the equivalent type antenna (Brand : INPAQ, Part No : WA-F-LE-02-044 (Main),WA-F-LE-01-007 (Aux)), (2) to reduced power, and (3) to disable the function of Wi-Fi 6E by firmware modification as described in this filing.

The highest reported SAR value for Body and simultaneous use condition are 1.03 W/kg, and 1.20 W/kg, respectively.

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59 W/kg and 1.57 W/kg, respectively.

This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 13 mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:

Intel Wi-Fi 6E AX210

by Inventec Corporation

Grantee Code: DGI Product Code: AX210NG

Latest application date: 2024-05-09

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application yj9dQhS5MH4O9bn9oW3dTA==

EAS Grant - Application yj9dQhS5MH4O9bn9oW3dTA==

TCB Grant - Application y6ssUM+TkCIFCvJFcND+jQ==

EAS Grant - Application y6ssUM+TkCIFCvJFcND+jQ==

TCB Grant - Application wV05f8XCYp6qak7keMSgcQ==

EAS Grant - Application wV05f8XCYp6qak7keMSgcQ==

TCB Grant - Application VXbDFoDxMr9tSFIFuC1hvQ==

EAS Grant - Application VXbDFoDxMr9tSFIFuC1hvQ==

TCB Grant - Application SW5zj2tiJCtIDzhxUAxpCw==

EAS Grant - Application SW5zj2tiJCtIDzhxUAxpCw==

TCB Grant - Application rVxSmjjN6emmZ00qqlh0rg==

EAS Grant - Application rVxSmjjN6emmZ00qqlh0rg==

TCB Grant - Application nwDSYpQKc87D6bjA/0YoTQ==

EAS Grant - Application nwDSYpQKc87D6bjA/0YoTQ==

TCB Grant - Application Lf0pVgPXe8qaZS+G2CrXGA==

EAS Grant - Application Lf0pVgPXe8qaZS+G2CrXGA==

TCB Grant - Application kEQyOJrjgJ67xUps+XeTeQ==

EAS Grant - Application kEQyOJrjgJ67xUps+XeTeQ==

TCB Grant - Application Hfba+2HDvgFg9UgBLMGHQg==

EAS Grant - Application Hfba+2HDvgFg9UgBLMGHQg==

TCB Grant - Application 9W6dUzOT3p4GklxlM6P5cQ==

EAS Grant - Application 9W6dUzOT3p4GklxlM6P5cQ==

TCB Grant - Application 7ko39SA4HbA+boonWPiz7Q==

EAS Grant - Application 7ko39SA4HbA+boonWPiz7Q==

TCB Grant - Application 2dgArj99QqnTNicOSBD6pA==

EAS Grant - Application 2dgArj99QqnTNicOSBD6pA==

TCB Grant - Application +5uRqajDyMHP0zGYu/HkjQ==

EAS Grant - Application +5uRqajDyMHP0zGYu/HkjQ==