FCC ID DGIBC8121AABAB0
PDA Phone
by Inventec Corporation
Grantee Code: DGI Product Code: BC8121AABAB0
Latest application date: 2009-03-25
FCC ID Device Details
| FCC ID | DGIBC8121AABAB0 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | DGI |
| Product Code | BC8121AABAB0 |
| Applicant Business | Inventec Corporation 🇹🇼 |
| Related Domains |  inventec.com |
| Equipment Class | PDA Phone |
| Test Firm | A Test Lab Techno Corp |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2009-03-25 |
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2009-03-25 |
| 2402-2480 MHz | Original Equipment | 2008-11-24 |
| 2412-2462 MHz | Original Equipment | 2008-11-24 |
| 824.2-848.8 MHz | Original Equipment | 2008-11-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2009-03-25 | PDF 1.1 MB |
| User manual | Users Manual | 2009-03-25 | PDF 1.1 MB |
| USERS MANUAL | Users Manual | 2009-01-07 | PDF 1.2 MB |
| Users Manual | Users Manual | 2008-11-24 | PDF 1.2 MB |
| INTERNAL PHOTOS | Internal Photos | 2009-01-07 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2008-11-24 | PDF 1.2 MB |
| EXTERNAL PHOTOS | External Photos | 2009-01-07 | PDF 537.4 KB |
| External Photos | External Photos | 2008-11-24 | PDF 537.4 KB |
| LABEL INFORMATION | ID Label/Location Info | 2009-01-07 | PDF 47.4 KB |
| Label Information | ID Label/Location Info | 2008-11-24 | PDF 47.4 KB |
| Product Specification | Operational Description | 2009-03-25 | PDF 159 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2009-01-07 | PDF 234.2 KB |
| Test Setup Photos | Test Setup Photos | 2008-11-24 | PDF 381.3 KB |
| CRN 36986 Revised SAR test report | RF Exposure Info | 2009-03-25 | PDF 3.9 MB |
| CRN 37103 revised SAR test report | RF Exposure Info | 2009-03-25 | PDF 4.5 MB |
| SAR Test Report | RF Exposure Info | 2009-03-25 | PDF 3.9 MB |
| SAR test report 1 (CRN 37103 revised SAR test report) | RF Exposure Info | 2009-03-25 | PDF 4.5 MB |
| SAR test report 2 (SAR Appendix E MultiBand Evaluation - sys.) | RF Exposure Info | 2009-03-25 | PDF 106.9 KB |
| SAR test report 3 (CRN 37103 Probe calibration file 3554) | RF Exposure Info | 2009-03-25 | PDF 2.5 MB |
| TEST REPORT 15B BT | Test Report | 2009-01-07 | PDF 1.9 MB |
| TEST REPORT 15B WIFI | Test Report | 2009-01-07 | PDF 2 MB |
| Power Compare Table | Test Report | 2008-11-24 | PDF 14 KB |
| Test Report | Test Report | 2008-11-24 | PDF 1.8 MB |
| Test Report | Test Report | 2008-11-24 | PDF 1.4 MB |
| Test Report | Test Report | 2008-11-24 | PDF 1.5 MB |
| Attestation of DoC | Attestation Statements | 2008-11-24 | PDF 36.1 KB |
| Agent Authorization Letter for CCS | Cover Letter(s) | 2009-03-25 | PDF 31 KB |
| Agent authorization letter | Cover Letter(s) | 2009-03-25 | PDF 28.3 KB |
| Agent authorization letter for CCS | Cover Letter(s) | 2009-03-25 | PDF 31 KB |
| Class II permissive change letter | Cover Letter(s) | 2009-03-25 | PDF 41.9 KB |
| Class II permissive change letter | Cover Letter(s) | 2009-03-25 | PDF 52.6 KB |
| CONFIDENTIAL REQUEST | Cover Letter(s) | 2009-01-07 | PDF 75 KB |
| POWER OF ATTORNEY | Cover Letter(s) | 2009-01-07 | PDF 36 KB |
| Confidential Letter | Cover Letter(s) | 2008-11-24 | PDF 49.1 KB |
| Power of Attorney | Cover Letter(s) | 2008-11-24 | PDF 36 KB |
| CRN 36986 Probe Calibration Adjustment | RF Exposure Info | 2009-03-25 | PDF 1.7 MB |
| CRN 37103 Probe calibration file 3554 | RF Exposure Info | 2009-03-25 | PDF 2.5 MB |
| SAR Appendix D 3G procedure | RF Exposure Info | 2009-03-25 | PDF 411.9 KB |
| SAR Appendix E MultiBand Evaluation - sys. | RF Exposure Info | 2009-03-25 | PDF 106.9 KB |
| SAR Appendix F 1 of 2 - 900, 1950, 2450 dipole | RF Exposure Info | 2009-03-25 | PDF 3.3 MB |
| SAR Appendix F 2 of 2 - ET3 sn 1530 | RF Exposure Info | 2009-03-25 | PDF 2.8 MB |
| SAR WCDMA and HSPA power table | RF Exposure Info | 2009-03-25 | PDF 69.7 KB |
| Calibration 1 | RF Exposure Info | 2008-11-24 | PDF 3.3 MB |
| Calibration 2 | RF Exposure Info | 2008-11-24 | PDF 2.2 MB |
| SAR Report | RF Exposure Info | 2008-11-24 | PDF 3.6 MB |
| SAR Report | RF Exposure Info | 2008-11-24 | PDF 3.6 MB |
Application Information
| Application ID | y/U+WVI+s6ONnzQ14Gb9kQ== |
|---|---|
| Final Action Date | 2009-03-25 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0015893373 |
| Model | BC8121AABAB0 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | PDA Phone |
| Responsible Party | Laurent Lin, Lin.Laurent@inventec.com , 886-2-2881-0721 |
| Technical Contact | Country Huang, A Test Lab Techno Corp., country@atl-lab.com.tw  , +886-3-2710188 |
| Test Firm | Country Huang, A Test Lab Techno Corp, Country@atl-lab.com.tw , 03-2710188 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. SAR compliance for body-worn operations is restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 1.5 cm separation between the device and the users body. SAR compliance for specific collocated transmitter conditions was evaluated as described in this composite filing; other collocated configurations require separate evaluation. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported single- and co-transmit SAR levels under this FCC ID are: Part 22: Body 1.05 W/kg, Head 0.22 W/kg; Part 24: Body 0.89 W/kg, Head 0.63 W/kg; Part 15: Body 0.54 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| y/U+WVI+s6ONnzQ14Gb9kQ== | 2009-03-25 | Class II permissive change or modification of presently authorized equipment |
| JeZ2q6pPcyJEsy5C9A9VaQ== | 2009-03-25 | Class II permissive change or modification of presently authorized equipment |
| 6MOc5b6RgH29CHhMGvwpxA== | 2009-01-07 | Original Equipment |
| LwEci9jdkgF9Tpvkoho85A== | 2008-11-24 | Original Equipment |
| 9fxuAgM+C5VLe/s0Tvrz2g== | 2008-11-24 | Original Equipment |
| 0K22eHrIDuZmsB55OM5eug== | 2008-11-24 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 824.2-848.8 MHz | 0.396 | 0.1ppm | 256KGXW | 22H | CC |
| 824.2-848.8 MHz | 0.396 | 0.1ppm | 256KGXW | 22H | |
| 824.2-848.8 MHz | 0.225 | 0.1ppm | 278KG7W | 22H | CC |
| 824.2-848.8 MHz | 0.225 | 0.1ppm | 278KG7W | 22H | |
| 826.4-846.6 MHz | 0.058 | 0.1ppm | 4M19F9W | 22H | |
| 826.4-846.6 MHz | 0.058 | 0.1ppm | 4M19F9W | 22H | CC |
| 1850.2-1909.8 MHz | 1.476 | 0.1ppm | 270KGXW | 24E | CC |
| 1850.2-1909.8 MHz | 0.72 | 0.1ppm | 270KG7W | 24E | CC |
| 1850.2-1909.8 MHz | 1.476 | 0.1ppm | 270KGXW | 24E | |
| 1850.2-1909.8 MHz | 0.72 | 0.1ppm | 270KG7W | 24E | |
| 1852.4-1907.6 MHz | 0.275 | 0.1ppm | 4M17F9W | 24E | CC |
| 1852.4-1907.6 MHz | 0.275 | 0.1ppm | 4M17F9W | 24E | |
| 2402-2480 MHz | 0.0030000 | 15C | CC | ||
| 2412-2462 MHz | 0.0740000 | 15C | CC |
Grants
TCB Grant - Application y/U+WVI+s6ONnzQ14Gb9kQ==
This application does not exist.
EAS Grant - Application y/U+WVI+s6ONnzQ14Gb9kQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inventec Corporation Inventa Bldg 66 Hou-Kang St Shih-Lin District Taipei, Taiwan |
Date of Grant: 03/25/2009 Application Dated: 03/11/2009 |
| Attention: Laurent Lin |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGIBC8121AABAB0 |
| Name of Grantee: | Inventec Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | PDA Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.074 |
| Power listed is conducted. SAR compliance for body-worn operations is restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 1.5 cm separation between the device and the users body. SAR compliance for specific collocated transmitter conditions was evaluated as described in this composite filing; other collocated configurations require separate evaluation. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported single- and co-transmit SAR levels under this FCC ID are: Part 22: Body 1.05 W/kg, Head 0.22 W/kg; Part 24: Body 0.89 W/kg, Head 0.63 W/kg; Part 15: Body 0.54 W/kg.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Country Houng, | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A Test Lab Techno Corp. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| No.140-1, Chang-an St.Bade City | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tao-Yuan, 334 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Taiwan | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 11/24/2008 Application Dated: 11/20/2008 |
| Inventec Corporation |
| Inventa Bldg 66 Hou-Kang St |
| Shih-Lin District |
| Taipei, Taiwan |
| Attention: Laurent Lin |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGIBC8121AABAB0 |
| Name of Grantee: | Inventec Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | PDA Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power listed is conducted. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter, except as evaluated in this composite filing. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application LwEci9jdkgF9Tpvkoho85A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inventec Corporation Inventa Bldg 66 Hou-Kang St Shih-Lin District Taipei, Taiwan |
Date of Grant: 11/24/2008 Application Dated: 11/20/2008 |
| Attention: Laurent Lin |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGIBC8121AABAB0 |
| Name of Grantee: | Inventec Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | PDA Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power listed is conducted. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter, except as evaluated in this composite filing. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inventec Corporation Inventa Bldg 66 Hou-Kang St Shih-Lin District Taipei, Taiwan |
Date of Grant: 03/25/2009 Application Dated: 12/18/2008 |
| Attention: Laurent Lin |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGIBC8121AABAB0 |
| Name of Grantee: | Inventec Corporation |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | PDA Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 0.396 | 0.1 PM | 256KGXW | |
| 22H | 824.2 - 848.8 | 0.225 | 0.1 PM | 278KG7W | |
| 22H | 826.4 - 846.6 | 0.058 | 0.1 PM | 4M19F9W | |
| 24E | 1850.2 - 1909.8 | 1.476 | 0.1 PM | 270KGXW | |
| 24E | 1850.2 - 1909.8 | 0.72 | 0.1 PM | 270KG7W | |
| 24E | 1852.4 - 1907.6 | 0.275 | 0.1 PM | 4M17F9W |
| Power listed is EIRP for part 24 and ERP for part 22. This device contains functions that are not operational in U.S. Territories; this filing is only applicable for U.S. operations. SAR compliance for body-worn operations is restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 1.5 cm separation between the device and the users body. SAR compliance for specific collocated transmitter conditions was evaluated as described in this composite filing; other collocated configurations require separate evaluation. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported single- and co-transmit SAR levels under this FCC ID are: Part 22: Body 1.05 W/kg, Head 0.22 W/kg; Part 24: Body 0.89 W/kg, Head 0.63 W/kg; Part 15: Body 0.54 W/kg.
|
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Country Huang, | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A Test Lab Technology Corp. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| No.140-1, Changan Street | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tao-Yuan County, 334 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Taiwan | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 11/24/2008 Application Dated: 11/20/2008 |
| Inventec Corporation |
| Inventa Bldg 66 Hou-Kang St |
| Shih-Lin District |
| Taipei, Taiwan |
| Attention: Laurent Lin |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGIBC8121AABAB0 |
| Name of Grantee: | Inventec Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | PDA Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.074 |
| Power listed is conducted. SAR compliance for body-worn operations is restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 1.5 cm separation between the device and the users body. SAR compliance for specific collocated transmitter conditions was evaluated as described in this composite filing; other collocated configurations require separate evaluation. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR levels are: Part 15.247: Body: 0.54W/kg |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 9fxuAgM+C5VLe/s0Tvrz2g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inventec Corporation Inventa Bldg 66 Hou-Kang St Shih-Lin District Taipei, Taiwan |
Date of Grant: 11/24/2008 Application Dated: 11/20/2008 |
| Attention: Laurent Lin |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGIBC8121AABAB0 |
| Name of Grantee: | Inventec Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | PDA Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.074 |
| Power listed is conducted. SAR compliance for body-worn operations is restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 1.5 cm separation between the device and the users body. SAR compliance for specific collocated transmitter conditions was evaluated as described in this composite filing; other collocated configurations require separate evaluation. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR levels are: Part 15.247: Body: 0.54W/kg |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 01/07/2009 Application Dated: 01/06/2009 |
| Inventec Corporation |
| Inventa Bldg 66 Hou-Kang St |
| Shih-Lin District |
| Taipei, Taiwan |
| Attention: Laurent Lin |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGIBC8121AABAB0 |
| Name of Grantee: | Inventec Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | PDA PHONE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
EAS Grant - Application 6MOc5b6RgH29CHhMGvwpxA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inventec Corporation Inventa Bldg 66 Hou-Kang St Shih-Lin District Taipei, Taiwan |
Date of Grant: 01/07/2009 Application Dated: 01/06/2009 |
| Attention: Laurent Lin |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGIBC8121AABAB0 |
| Name of Grantee: | Inventec Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | PDA PHONE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 11/24/2008 Application Dated: 11/20/2008 |
| Inventec Corporation |
| Inventa Bldg 66 Hou-Kang St |
| Shih-Lin District |
| Taipei, Taiwan |
| Attention: Laurent Lin |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGIBC8121AABAB0 |
| Name of Grantee: | Inventec Corporation |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | PDA Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 22H | 824.2 - 848.8 | 0.396 | 0.1 PM | 256KGXW |
| CC | 22H | 824.2 - 848.8 | 0.225 | 0.1 PM | 278KG7W |
| CC | 24E | 1850.2 - 1909.8 | 1.476 | 0.1 PM | 270KGXW |
| CC | 24E | 1850.2 - 1909.8 | 0.72 | 0.1 PM | 270KG7W |
| CC | 22H | 826.4 - 846.6 | 0.058 | 0.1 PM | 4M19F9W |
| CC | 24E | 1852.4 - 1907.6 | 0.275 | 0.1 PM | 4M17F9W |
| Power listed is EIRP for part 24 and ERP for part 22. SAR compliance for body-worn operations is restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 1.5 cm separation between the device and the users body. SAR compliance for specific collocated transmitter conditions was evaluated as described in this composite filing; other collocated configurations require separate evaluation. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR levels are: Part 22: Body: 1.05W/kg, Head: 0.22W/kg; Part 24: Body: 0.89W/kg, Head: 0.63W/kg. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 0K22eHrIDuZmsB55OM5eug==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inventec Corporation Inventa Bldg 66 Hou-Kang St Shih-Lin District Taipei, Taiwan |
Date of Grant: 11/24/2008 Application Dated: 11/20/2008 |
| Attention: Laurent Lin |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | DGIBC8121AABAB0 |
| Name of Grantee: | Inventec Corporation |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | PDA Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 22H | 824.2 - 848.8 | 0.396 | 0.1 PM | 256KGXW |
| CC | 22H | 824.2 - 848.8 | 0.225 | 0.1 PM | 278KG7W |
| CC | 24E | 1850.2 - 1909.8 | 1.476 | 0.1 PM | 270KGXW |
| CC | 24E | 1850.2 - 1909.8 | 0.72 | 0.1 PM | 270KG7W |
| CC | 22H | 826.4 - 846.6 | 0.058 | 0.1 PM | 4M19F9W |
| CC | 24E | 1852.4 - 1907.6 | 0.275 | 0.1 PM | 4M17F9W |
| Power listed is EIRP for part 24 and ERP for part 22. SAR compliance for body-worn operations is restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 1.5 cm separation between the device and the users body. SAR compliance for specific collocated transmitter conditions was evaluated as described in this composite filing; other collocated configurations require separate evaluation. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR levels are: Part 22: Body: 1.05W/kg, Head: 0.22W/kg; Part 24: Body: 0.89W/kg, Head: 0.63W/kg. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |