FCC ID DXX512ANM

Wi-Fi Link 5100 Series

by Mindray DS USA, Inc.

Grantee Code: DXX   Product Code: 512ANM
Latest application date: 2012-01-11

FCC ID Device Details

FCC IDDXX512ANM
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeDXX
Product Code512ANM
Applicant BusinessMindray DS USA, Inc. 🇺🇸
Related Domains mindray.com
Equipment ClassWi-Fi Link 5100 Series
Test FirmAdvanced Compliance Solutions, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2012-01-11
5180-5320 MHzChange in identification of presently authorized equipment. Original FCC ID: PD9512ANM Grant Date: 06/17/20082012-01-04
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: PD9512ANM Grant Date: 06/17/20082012-01-04

Exhibits

DocumentTypeAvailableFile
Internal PhotosInternal Photos2012-01-11PDF 571.5 KB
External PhotosExternal Photos2012-01-11PDF 456.4 KB
External PhotosExternal Photos2012-01-04PDF 87.4 KB
Label InformationID Label/Location Info2012-01-04PDF 122.5 KB
Test Setup PhotosTest Setup Photos2012-01-11PDF 1.7 MB
Test ReportTest Report2012-01-11PDF 145.2 KB
Agency AgreementCover Letter(s)2012-01-11PDF 203.5 KB
FCC Cover LetterCover Letter(s)2012-01-11PDF 17.4 KB
Change in ID Permission LetterCover Letter(s)2012-01-04PDF 16.5 KB
Change in ID Request LetterCover Letter(s)2012-01-04PDF 168.6 KB
RF ExposureRF Exposure Info2012-01-11PDF 25.4 KB

Application Information

Application IDqEfS4QTxoRpqLkNJ/wjO0g==
Final Action Date2012-01-11
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0006301881
Model512ANM
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWi-Fi Link 5100 Series
Responsible PartyScott Gisler, Director, Program Management, s.gisler@mindray.com , 201-995-8304
AgentSam Sam Sam, Advanced Compliance Solutions, Inc., swismer@acstestlab.com , 770 831-8048
Test FirmRandy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com , 770-831-8048
TCB Emailjwoods@acstestlab.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, other than as described in filing under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Single Modular Class II Change to address new antenna type in specific host device.

Applications

Application IDDatePurpose
qEfS4QTxoRpqLkNJ/wjO0g==2012-01-11Class II permissive change or modification of presently authorized equipment
wAydytTbPeqEPvM7TGd3Ug==2012-01-04Change in identification of presently authorized equipment. Original FCC ID: PD9512ANM Grant Date: 06/17/2008
dTyPGp0R79DkPPG7hnIUiw==2012-01-04Change in identification of presently authorized equipment. Original FCC ID: PD9512ANM Grant Date: 06/17/2008
8u+b7x7SistQrCYOqJl5zg==2012-01-04Change in identification of presently authorized equipment. Original FCC ID: PD9512ANM Grant Date: 06/17/2008

Equipment Authorization

FrequencyOutputRulesGrant Notes
15BCC
2412-2462 MHz0.09115CCC
2422-2452 MHz0.03715CCC
5180-5320 MHz0.02815ECC
5190-5310 MHz0.02515ECC
5500-5700 MHz0.05415ECC
5510-5670 MHz0.02515ECC
5745-5825 MHz0.01815CCC
5755-5795 MHz0.02115CCC

Grants

TCB Grant - Application wAydytTbPeqEPvM7TGd3Ug==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Advanced Compliance Solutions, Inc.
5015 B.U. Bowman Drive
Buford, GA 30518
Date of Grant: 01/04/2012

Application Dated: 01/04/2012
Mindray DS USA, Inc.
800 MacArthur Blvd
Mahwah, NJ 07430
 
Attention: Scott Gisler , Director, Program Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DXX512ANM
Name of Grantee:  Mindray DS USA, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi-Fi Link 5100 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5320.0 0.028  
CC 15E 5190.0  -  5310.0 0.025  
CC 15E 5500.0  -  5700.0 0.054  
CC 15E 5510.0  -  5670.0 0.025  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, other than as described in filing under this FCC ID. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.

Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application wAydytTbPeqEPvM7TGd3Ug==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mindray DS USA, Inc.
800 MacArthur Blvd
Mahwah, NJ 07430
United States
  Date of Grant: 01/04/2012

Application Dated: 01/04/2012
 
Attention: Scott Gisler , Director, Program Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DXX512ANM
Name of Grantee:  Mindray DS USA, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi-Fi Link 5100 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5320.0 0.028  
CC 15E 5190.0  -  5310.0 0.025  
CC 15E 5500.0  -  5700.0 0.054  
CC 15E 5510.0  -  5670.0 0.025  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, other than as described in filing under this FCC ID. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.

Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application qEfS4QTxoRpqLkNJ/wjO0g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Advanced Compliance Solutions, Inc.
5015 B.U. Bowman Drive
Buford, GA 30518
Date of Grant: 01/11/2012

Application Dated: 01/10/2012
Mindray DS USA, Inc.
800 MacArthur Blvd
Mahwah, NJ 07430
 
Attention: Scott Gisler , Director, Program Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DXX512ANM
Name of Grantee:  Mindray DS USA, Inc.
Equipment Class: Digital Transmission System
Notes: Wi-Fi Link 5100 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.091  
CC 15C 2422.0  -  2452.0 0.037  
CC 15C 5745.0  -  5825.0 0.018  
CC 15C 5755.0  -  5795.0 0.021  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, other than as described in filing under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Single Modular

Class II Change to address new antenna type in specific host device.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application qEfS4QTxoRpqLkNJ/wjO0g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mindray DS USA, Inc.
800 MacArthur Blvd
Mahwah, NJ 07430
United States
  Date of Grant: 01/11/2012

Application Dated: 01/10/2012
 
Attention: Scott Gisler , Director, Program Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DXX512ANM
Name of Grantee:  Mindray DS USA, Inc.
Equipment Class: Digital Transmission System
Notes: Wi-Fi Link 5100 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.091  
CC 15C 2422.0  -  2452.0 0.037  
CC 15C 5745.0  -  5825.0 0.018  
CC 15C 5755.0  -  5795.0 0.021  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, other than as described in filing under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Single Modular

Class II Change to address new antenna type in specific host device.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application dTyPGp0R79DkPPG7hnIUiw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Advanced Compliance Solutions, Inc.
5015 B.U. Bowman Drive
Buford, GA 30518
Date of Grant: 01/04/2012

Application Dated: 01/04/2012
Mindray DS USA, Inc.
800 MacArthur Blvd
Mahwah, NJ 07430
 
Attention: Scott Gisler , Director, Program Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DXX512ANM
Name of Grantee:  Mindray DS USA, Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Wi-Fi Link 5100 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application dTyPGp0R79DkPPG7hnIUiw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mindray DS USA, Inc.
800 MacArthur Blvd
Mahwah, NJ 07430
United States
  Date of Grant: 01/04/2012

Application Dated: 01/04/2012
 
Attention: Scott Gisler , Director, Program Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DXX512ANM
Name of Grantee:  Mindray DS USA, Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Wi-Fi Link 5100 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 8u+b7x7SistQrCYOqJl5zg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Advanced Compliance Solutions, Inc.
5015 B.U. Bowman Drive
Buford, GA 30518
Date of Grant: 01/04/2012

Application Dated: 01/04/2012
Mindray DS USA, Inc.
800 MacArthur Blvd
Mahwah, NJ 07430
 
Attention: Scott Gisler , Director, Program Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DXX512ANM
Name of Grantee:  Mindray DS USA, Inc.
Equipment Class: Digital Transmission System
Notes: Wi-Fi Link 5100 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.091  
CC 15C 2422.0  -  2452.0 0.037  
CC 15C 5745.0  -  5825.0 0.018  
CC 15C 5755.0  -  5795.0 0.021  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, other than as described in filing under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 8u+b7x7SistQrCYOqJl5zg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mindray DS USA, Inc.
800 MacArthur Blvd
Mahwah, NJ 07430
United States
  Date of Grant: 01/04/2012

Application Dated: 01/04/2012
 
Attention: Scott Gisler , Director, Program Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DXX512ANM
Name of Grantee:  Mindray DS USA, Inc.
Equipment Class: Digital Transmission System
Notes: Wi-Fi Link 5100 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.091  
CC 15C 2422.0  -  2452.0 0.037  
CC 15C 5745.0  -  5825.0 0.018  
CC 15C 5755.0  -  5795.0 0.021  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, other than as described in filing under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: