FCC ID DYD62230WL

Wireless Module

by Wyse Technology

Grantee Code: DYD   Product Code: 62230WL
Latest application date: 2011-09-21

FCC ID Device Details

FCC IDDYD62230WL
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeDYD
Product Code62230WL
Applicant BusinessWyse Technology 🇺🇸
Related Domains wyse.com
Equipment ClassWireless Module
Test FirmA Test Lab Techno Corp

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2011-09-21
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2011-09-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2011-09-20
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: PD962230ANH Grant Date: 10/21/20102011-08-12
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: PD962230ANH Grant Date: 10/21/20102011-08-12
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: PD962230ANH Grant Date: 10/21/20102011-08-12

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2011-09-21PDF 2.2 MB
Internal photosInternal Photos2011-09-21PDF 1.1 MB
External photosExternal Photos2011-09-21PDF 669.4 KB
External photosExternal Photos2011-08-12PDF 178.3 KB
Label format and locationID Label/Location Info2011-09-21PDF 324.9 KB
Label format and locationID Label/Location Info2011-08-12PDF 54.5 KB
Test setup photosTest Setup Photos2011-09-21PDF 226.8 KB
Test setup photosTest Setup Photos2011-09-21PDF 226.8 KB
Test setup photosTest Setup Photos2011-09-20PDF 226.8 KB
Test reportTest Report2011-09-21PDF 671.2 KB
Test reportTest Report2011-09-21PDF 660.8 KB
Test reportTest Report2011-09-20PDF 581 KB
Attestation statements of DOCAttestation Statements2011-09-21PDF 41.3 KB
Attestation statements of passive scanAttestation Statements2011-09-21PDF 90.7 KB
Attestation statemnts of passive scanAttestation Statements2011-09-21PDF 90.7 KB
Agent authorizationCover Letter(s)2011-09-21PDF 19.8 KB
C2PC Request letterCover Letter(s)2011-09-21PDF 21.4 KB
C2PC request letterCover Letter(s)2011-09-21PDF 21.4 KB
Request for confidentialityCover Letter(s)2011-09-21PDF 35.4 KB
Agent authorizationCover Letter(s)2011-08-12PDF 182.1 KB
Authorization from IntelCover Letter(s)2011-08-12PDF 57.1 KB
Request for change in IDCover Letter(s)2011-08-12PDF 68.4 KB
RF exposure InfoRF Exposure Info2011-09-21PDF 214.5 KB

Application Information

Application IDHrdVdduezoFaxp7L1MNU3A==
Final Action Date2011-09-21
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0000375627
Model62230WL
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless Module
Responsible PartyBenton Ng, Regulatory Engineer, bng@wyse.com , 408 473-1938
Test FirmCountry Huang, A Test Lab Techno Corp, Country@atl-lab.com.tw , 03-2710188
TCB Emailcertnotice@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II permissive change filing to install module to a mobile configuration with a lower gain dipole antenna.Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.

Applications

Application IDDatePurpose
HrdVdduezoFaxp7L1MNU3A==2011-09-21Class II permissive change or modification of presently authorized equipment
9iQQZRkHcStnzxcuEjqLcg==2011-09-21Class II permissive change or modification of presently authorized equipment
9yIi+bH0vDe4f83WQ5Yp6w==2011-09-20Class II permissive change or modification of presently authorized equipment
xn0U8Mq6cb0peT2PAbeVtA==2011-08-12Change in identification of presently authorized equipment. Original FCC ID: PD962230ANH Grant Date: 10/21/2010
xZ1dgO16UEox6yZyePWROg==2011-08-12Change in identification of presently authorized equipment. Original FCC ID: PD962230ANH Grant Date: 10/21/2010
r/j9Wfr4pd9lIb8Lvfwcag==2011-08-12Change in identification of presently authorized equipment. Original FCC ID: PD962230ANH Grant Date: 10/21/2010
UN0T03hEFl1mG7Qw2jlEmQ==2011-08-12Change in identification of presently authorized equipment. Original FCC ID: PD962230ANH Grant Date: 10/21/2010

Equipment Authorization

FrequencyOutputRulesGrant Notes
15BCC
2402-2480 MHz0.00415CCC
2402-2480 MHz0.00315CCC
2412-2462 MHz0.04915CCC, MO
2412-2462 MHz0.03815CCC, MO
2412-2462 MHz0.04115CCC, MO
2422-2452 MHz0.03415CCC, MO
5180-5240 MHz0.04515ECC, MO
5180-5240 MHz0.04215ECC, MO
5190-5230 MHz0.04415ECC, MO
5260-5320 MHz0.04615ECC, MO, ND
5260-5320 MHz0.04415ECC, MO, ND
5270-5310 MHz0.0415ECC, MO, ND
5500-5700 MHz0.04515ECC, MO, ND
5500-5700 MHz0.04415ECC, MO, ND
5510-5670 MHz0.04415ECC, MO, ND
5745-5825 MHz0.039815CCC, MO
5755-5795 MHz0.24615CCC, MO

Grants

TCB Grant - Application xZ1dgO16UEox6yZyePWROg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 08/12/2011

Application Dated: 08/12/2011
Wyse Technology
3471 North First Street
San Jose, CA 95134
 
Attention: Benton Ng , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DYD62230WL
Name of Grantee:  Wyse Technology
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC 15C 2402.0  -  2480.0 0.003  

Power output is conducted. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application xZ1dgO16UEox6yZyePWROg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wyse Technology
3471 North First Street
San Jose, CA 95134
United States
  Date of Grant: 08/12/2011

Application Dated: 08/12/2011
 
Attention: Benton Ng , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DYD62230WL
Name of Grantee:  Wyse Technology
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC 15C 2402.0  -  2480.0 0.003  

Power output is conducted. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application xn0U8Mq6cb0peT2PAbeVtA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 08/12/2011

Application Dated: 08/12/2011
Wyse Technology
3471 North First Street
San Jose, CA 95134
 
Attention: Benton Ng , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DYD62230WL
Name of Grantee:  Wyse Technology
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.045  
CC MO 15E 5180.0  -  5240.0 0.042  
CC MO 15E 5190.0  -  5230.0 0.044  
CC MO ND 15E 5260.0  -  5320.0 0.046  
CC MO ND 15E 5260.0  -  5320.0 0.044  
CC MO ND 15E 5270.0  -  5310.0 0.04  
CC MO ND 15E 5500.0  -  5700.0 0.045  
CC MO ND 15E 5500.0  -  5700.0 0.044  
CC MO ND 15E 5510.0  -  5670.0 0.044  

Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application xn0U8Mq6cb0peT2PAbeVtA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wyse Technology
3471 North First Street
San Jose, CA 95134
United States
  Date of Grant: 08/12/2011

Application Dated: 08/12/2011
 
Attention: Benton Ng , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DYD62230WL
Name of Grantee:  Wyse Technology
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.045  
CC MO 15E 5180.0  -  5240.0 0.042  
CC MO 15E 5190.0  -  5230.0 0.044  
CC MO ND 15E 5260.0  -  5320.0 0.046  
CC MO ND 15E 5260.0  -  5320.0 0.044  
CC MO ND 15E 5270.0  -  5310.0 0.04  
CC MO ND 15E 5500.0  -  5700.0 0.045  
CC MO ND 15E 5500.0  -  5700.0 0.044  
CC MO ND 15E 5510.0  -  5670.0 0.044  

Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application UN0T03hEFl1mG7Qw2jlEmQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 08/12/2011

Application Dated: 08/12/2011
Wyse Technology
3471 North First Street
San Jose, CA 95134
 
Attention: Benton Ng , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DYD62230WL
Name of Grantee:  Wyse Technology
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application UN0T03hEFl1mG7Qw2jlEmQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wyse Technology
3471 North First Street
San Jose, CA 95134
United States
  Date of Grant: 08/12/2011

Application Dated: 08/12/2011
 
Attention: Benton Ng , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DYD62230WL
Name of Grantee:  Wyse Technology
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application r/j9Wfr4pd9lIb8Lvfwcag==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 08/12/2011

Application Dated: 08/12/2011
Wyse Technology
3471 North First Street
San Jose, CA 95134
 
Attention: Benton Ng , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DYD62230WL
Name of Grantee:  Wyse Technology
Equipment Class: Digital Transmission System
Notes: Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.049  
CC MO 15C 2412.0  -  2462.0 0.038  
CC MO 15C 2412.0  -  2462.0 0.041  
CC MO 15C 2422.0  -  2452.0 0.034  
CC MO 15C 5745.0  -  5825.0 0.0398  
CC MO 15C 5755.0  -  5795.0 0.246  

Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. Device is an 2x2 Spatial Multiplexing MIMO configuration as described in this filing. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application r/j9Wfr4pd9lIb8Lvfwcag==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wyse Technology
3471 North First Street
San Jose, CA 95134
United States
  Date of Grant: 08/12/2011

Application Dated: 08/12/2011
 
Attention: Benton Ng , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DYD62230WL
Name of Grantee:  Wyse Technology
Equipment Class: Digital Transmission System
Notes: Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.049  
CC MO 15C 2412.0  -  2462.0 0.038  
CC MO 15C 2412.0  -  2462.0 0.041  
CC MO 15C 2422.0  -  2452.0 0.034  
CC MO 15C 5745.0  -  5825.0 0.0398  
CC MO 15C 5755.0  -  5795.0 0.246  

Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. Device is an 2x2 Spatial Multiplexing MIMO configuration as described in this filing. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application HrdVdduezoFaxp7L1MNU3A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/21/2011

Application Dated: 09/21/2011
Wyse Technology
3471 North First Street
San Jose, CA 95134
 
Attention: Benton Ng , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DYD62230WL
Name of Grantee:  Wyse Technology
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.045  
CC MO 15E 5180.0  -  5240.0 0.042  
CC MO 15E 5190.0  -  5230.0 0.044  
CC MO ND 15E 5260.0  -  5320.0 0.046  
CC MO ND 15E 5260.0  -  5320.0 0.044  
CC MO ND 15E 5270.0  -  5310.0 0.04  
CC MO ND 15E 5500.0  -  5700.0 0.045  
CC MO ND 15E 5500.0  -  5700.0 0.044  
CC MO ND 15E 5510.0  -  5670.0 0.044  

Class II permissive change filing to install module to a mobile configuration with a lower gain dipole antenna.Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application HrdVdduezoFaxp7L1MNU3A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wyse Technology
3471 North First Street
San Jose, CA 95134
United States
  Date of Grant: 09/21/2011

Application Dated: 09/21/2011
 
Attention: Benton Ng , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DYD62230WL
Name of Grantee:  Wyse Technology
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.045  
CC MO 15E 5180.0  -  5240.0 0.042  
CC MO 15E 5190.0  -  5230.0 0.044  
CC MO ND 15E 5260.0  -  5320.0 0.046  
CC MO ND 15E 5260.0  -  5320.0 0.044  
CC MO ND 15E 5270.0  -  5310.0 0.04  
CC MO ND 15E 5500.0  -  5700.0 0.045  
CC MO ND 15E 5500.0  -  5700.0 0.044  
CC MO ND 15E 5510.0  -  5670.0 0.044  

Class II permissive change filing to install module to a mobile configuration with a lower gain dipole antenna.Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 9yIi+bH0vDe4f83WQ5Yp6w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/20/2011

Application Dated: 09/20/2011
Wyse Technology
3471 North First Street
San Jose, CA 95134
 
Attention: Benton Ng , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DYD62230WL
Name of Grantee:  Wyse Technology
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC 15C 2402.0  -  2480.0 0.003  

Class II permissive change filing to install module to a mobile configuration with a lower gain dipole antenna. Power output is conducted. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 9yIi+bH0vDe4f83WQ5Yp6w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wyse Technology
3471 North First Street
San Jose, CA 95134
United States
  Date of Grant: 09/20/2011

Application Dated: 09/20/2011
 
Attention: Benton Ng , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DYD62230WL
Name of Grantee:  Wyse Technology
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC 15C 2402.0  -  2480.0 0.003  

Class II permissive change filing to install module to a mobile configuration with a lower gain dipole antenna. Power output is conducted. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 9iQQZRkHcStnzxcuEjqLcg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/21/2011

Application Dated: 09/20/2011
Wyse Technology
3471 North First Street
San Jose, CA 95134
 
Attention: Benton Ng , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DYD62230WL
Name of Grantee:  Wyse Technology
Equipment Class: Digital Transmission System
Notes: Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.049  
CC MO 15C 2412.0  -  2462.0 0.038  
CC MO 15C 2412.0  -  2462.0 0.041  
CC MO 15C 2422.0  -  2452.0 0.034  
CC MO 15C 5745.0  -  5825.0 0.0398  
CC MO 15C 5755.0  -  5795.0 0.246  

Class II permissive change filing to install module to a mobile configuration with a lower gain dipole antenna. Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. Device is an 2x2Spatial Multiplexing MIMO configuration as described in this filing. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 9iQQZRkHcStnzxcuEjqLcg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wyse Technology
3471 North First Street
San Jose, CA 95134
United States
  Date of Grant: 09/21/2011

Application Dated: 09/20/2011
 
Attention: Benton Ng , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  DYD62230WL
Name of Grantee:  Wyse Technology
Equipment Class: Digital Transmission System
Notes: Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.049  
CC MO 15C 2412.0  -  2462.0 0.038  
CC MO 15C 2412.0  -  2462.0 0.041  
CC MO 15C 2422.0  -  2452.0 0.034  
CC MO 15C 5745.0  -  5825.0 0.0398  
CC MO 15C 5755.0  -  5795.0 0.246  

Class II permissive change filing to install module to a mobile configuration with a lower gain dipole antenna. Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. Device is an 2x2Spatial Multiplexing MIMO configuration as described in this filing. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: