FCC ID E2K-RTL8852BE

11ax RTL8852BE Combo module

by Dell Inc.

Grantee Code: E2K   Product Code: RTL8852BE
Latest application date: 2023-03-11

FCC ID Device Details

FCC IDE2K-RTL8852BE
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeE2K
Product CodeRTL8852BE
Applicant BusinessDell Inc. 🇺🇸
Related Domains dell.com
Equipment Class11ax RTL8852BE Combo module
Test FirmSporton International Inc. Wensan Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-03-11
2412-2472 MHzClass II permissive change or modification of presently authorized equipment2023-03-11
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-03-11
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2023-03-11
5845-5885 MHzClass II permissive change or modification of presently authorized equipment2023-03-11
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-03-11
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: TX2-RTL8852BE Grant Date: 08/13/20212022-12-25
5845-5885 MHzChange in identification of presently authorized equipment. Original FCC ID: TX2-RTL8852BE Grant Date: 09/06/20222022-12-25
2412-2472 MHzChange in identification of presently authorized equipment. Original FCC ID: TX2-RTL8852BE Grant Date: 08/13/20212022-12-25

Exhibits

DocumentTypeAvailableFile
User Manual-1Users Manual2023-09-08PDF 88.7 KB
User Manual-1Users Manual2023-09-08PDF 593.6 KB
User Manual-2Users Manual2023-09-08PDF 88.7 KB
User Manual-2Users Manual2023-09-08PDF 2.2 MB
Internal PhotosInternal Photos2023-09-08PDF 1.4 MB
Internal PhotosInternal Photos2023-09-08PDF 1.5 MB
External PhotosExternal Photos2023-09-08PDF 1.7 MB
External PhotosExternal Photos2023-09-08PDF 1.7 MB
External PhotosExternal Photos2022-12-25PDF 77.6 KB
ID Label and LocationID Label/Location Info2023-03-11PDF 95.1 KB
ID Label and LocationID Label/Location Info2023-03-11PDF 70.6 KB
ID Label and LocationID Label/Location Info2022-12-25PDF 24.2 KB
Test Setup Photos_SARTest Setup Photos2023-09-08PDF 81.3 KB
Test Setup Photos_SARTest Setup Photos2023-09-08PDF 104.8 KB
Test Report_AntennaTest Report2023-03-11PDF 1.8 MB
Test Report_Antenna-1Test Report2023-03-11PDF 1.5 MB
Test Report_Antenna-2Test Report2023-03-11PDF 1.6 MB
Agent Designation AttestationAttestation Statements2023-03-11PDF 425.6 KB
Covered List Attestation LetterAttestation Statements2023-03-11PDF 417.2 KB
C2PC LetterCover Letter(s)2023-03-11PDF 58.7 KB
C2PC LetterCover Letter(s)2023-03-11PDF 58.7 KB
Confidentiality Request LetterCover Letter(s)2023-03-11PDF 121.5 KB
POACover Letter(s)2023-03-11PDF 58.9 KB
POA_contactCover Letter(s)2023-03-11PDF 79.8 KB
POA_contactCover Letter(s)2023-03-11PDF 243.4 KB
Change In FCC ID AuthorizationCover Letter(s)2022-12-25PDF 463.8 KB
Change in FCC ID request letterCover Letter(s)2022-12-25PDF 62.7 KB
Confidentiality Request LetterCover Letter(s)2022-12-25PDF 117.4 KB
Declaration Letter_ClientCover Letter(s)2022-12-25PDF 127.9 KB
POACover Letter(s)2022-12-25PDF 54.3 KB
SAR Report-1RF Exposure Info2023-03-11PDF 1.7 MB
SAR Report-1RF Exposure Info2023-03-11PDF 1.3 MB
SAR Report-2RF Exposure Info2023-03-11PDF 905.6 KB
SAR Report-2RF Exposure Info2023-03-11PDF 527.6 KB
SAR Report-3RF Exposure Info2023-03-11PDF 593 KB
SAR Report-3RF Exposure Info2023-03-11PDF 594.7 KB
SAR Report-4RF Exposure Info2023-03-11PDF 5.8 MB
SAR Report-4RF Exposure Info2023-03-11PDF 5.4 MB
SAR Report-5RF Exposure Info2023-03-11PDF 5.8 MB
SAR Report-5RF Exposure Info2023-03-11PDF 2.7 MB
Operational Description Metadata onlyOperational DescriptionPDF 701.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 403.3 KB
Software Operational Description Metadata onlySDR Software/Security InfPDF 331.2 KB
Software Security Metadata onlySDR Software/Security InfPDF 331.2 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 213.5 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 278.8 KB

Application Information

Application IDxFXa5V/Gu4O1eaNxfSL45Q==
Final Action Date2023-03-11
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0008359580
ModelRTL8852BE
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device Description11ax RTL8852BE Combo module
Responsible PartyDon A Bobo, Distinguished Member of Technical Staff, don_bobo@dell.com , 512-728-5508
Test FirmAlex CHEN, Sporton International Inc. Wensan Laboratory, alex@sporton.com.tw , +886-3-327-3456
TCB Emailvina.kerai@nemko.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date09/08/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is conducted. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P182G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.38 W/kg and 1.15 W/kg, respectively.

Applications

Application IDDatePurpose
xFXa5V/Gu4O1eaNxfSL45Q==2023-03-11Class II permissive change or modification of presently authorized equipment
eGsvrCwAw3z+kT9kq/ngig==2023-03-11Class II permissive change or modification of presently authorized equipment
akMxelU6wBNmU21c9iKifw==2023-03-11Class II permissive change or modification of presently authorized equipment
JJmPItq5gJ5LZw4Z1AfpHw==2023-03-11Class II permissive change or modification of presently authorized equipment
9lNLOtlIHAQglcnXc4of4Q==2023-03-11Class II permissive change or modification of presently authorized equipment
8MY9R/dK+H7TFqsEyMs4oA==2023-03-11Class II permissive change or modification of presently authorized equipment
xqBk3KDQtP4RtqxmoG1iIg==2022-12-25Change in identification of presently authorized equipment. Original FCC ID: TX2-RTL8852BE Grant Date: 08/13/2021
H+w/2vsQgGFbWXmQpSouaA==2022-12-25Change in identification of presently authorized equipment. Original FCC ID: TX2-RTL8852BE Grant Date: 09/06/2022
CIr128YgcA+DoiUN2b/gbw==2022-12-25Change in identification of presently authorized equipment. Original FCC ID: TX2-RTL8852BE Grant Date: 08/13/2021

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.018000015CCC
2402-2480 MHz0.01815CCC
2412-2472 MHz0.30815CCC, MO
5180-5240 MHz0.24715ECC, MO
5260-5320 MHz0.24915ECC, MO, ND
5500-5720 MHz0.24515ECC, MO, ND
5745-5825 MHz0.34815ECC, MO
5845-5885 MHz0.76415ECC, EP, MO

Grants

TCB Grant - Application xqBk3KDQtP4RtqxmoG1iIg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 12/25/2022

Application Dated: 12/14/2022
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-RTL8852BE
Name of Grantee:  Dell Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 11ax RTL8852BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.018  

Single Modular Approval. Output power listed is conducted. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application xqBk3KDQtP4RtqxmoG1iIg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 12/25/2022

Application Dated: 12/14/2022
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-RTL8852BE
Name of Grantee:  Dell Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 11ax RTL8852BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.018  

Single Modular Approval. Output power listed is conducted. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application xFXa5V/Gu4O1eaNxfSL45Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 03/11/2023

Application Dated: 03/11/2023
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-RTL8852BE
Name of Grantee:  Dell Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 11ax RTL8852BE Combo module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.018  

Single Modular Approval. Output power listed is conducted. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P182G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.38 W/kg and 1.15 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application xFXa5V/Gu4O1eaNxfSL45Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 03/11/2023

Application Dated: 03/11/2023
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-RTL8852BE
Name of Grantee:  Dell Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 11ax RTL8852BE Combo module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.018  

Single Modular Approval. Output power listed is conducted. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P182G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.38 W/kg and 1.15 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application JJmPItq5gJ5LZw4Z1AfpHw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 03/11/2023

Application Dated: 03/10/2023
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-RTL8852BE
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 11ax RTL8852BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.247  
CC MO ND 15E 5260.0  -  5320.0 0.249  
CC MO ND 15E 5500.0  -  5720.0 0.245  
CC MO 15E 5745.0  -  5825.0 0.348  
CC EP MO 15E 5845.0  -  5885.0 0.764  

Single Modular Approval. Output power listed is conducted. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Permissive Change: to enable the U-NII-4 and U-NII-3 & -4 span channels through software change and to address the SAR evaluation at 5mm minimum test separation distance as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.73 W/kg and 1.01 W/kg, respectively. Device operation is intended for indoor use only.

Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P168G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.95 W/kg and 0.95 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application JJmPItq5gJ5LZw4Z1AfpHw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 03/11/2023

Application Dated: 03/10/2023
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-RTL8852BE
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 11ax RTL8852BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.247  
CC MO ND 15E 5260.0  -  5320.0 0.249  
CC MO ND 15E 5500.0  -  5720.0 0.245  
CC MO 15E 5745.0  -  5825.0 0.348  
CC EP MO 15E 5845.0  -  5885.0 0.764  

Single Modular Approval. Output power listed is conducted. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Permissive Change: to enable the U-NII-4 and U-NII-3 & -4 span channels through software change and to address the SAR evaluation at 5mm minimum test separation distance as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.73 W/kg and 1.01 W/kg, respectively. Device operation is intended for indoor use only.

Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P168G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.95 W/kg and 0.95 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application H+w/2vsQgGFbWXmQpSouaA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 12/25/2022

Application Dated: 12/14/2022
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-RTL8852BE
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 11ax RTL8852BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.247  
CC MO ND 15E 5260.0  -  5320.0 0.249  
CC MO ND 15E 5500.0  -  5720.0 0.245  
CC MO 15E 5745.0  -  5825.0 0.348  
CC EP MO 15E 5845.0  -  5885.0 0.764  

Single Modular Approval. Output power listed is conducted. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Class II Permissive Change: to enable the U-NII-4 and U-NII-3 & -4 span channels through software change and to address the SAR evaluation at 5mm minimum test separation distance as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.73 W/kg and 1.01 W/kg, respectively. Device operation is intended for indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application H+w/2vsQgGFbWXmQpSouaA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 12/25/2022

Application Dated: 12/14/2022
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-RTL8852BE
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 11ax RTL8852BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.247  
CC MO ND 15E 5260.0  -  5320.0 0.249  
CC MO ND 15E 5500.0  -  5720.0 0.245  
CC MO 15E 5745.0  -  5825.0 0.348  
CC EP MO 15E 5845.0  -  5885.0 0.764  

Single Modular Approval. Output power listed is conducted. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Class II Permissive Change: to enable the U-NII-4 and U-NII-3 & -4 span channels through software change and to address the SAR evaluation at 5mm minimum test separation distance as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.73 W/kg and 1.01 W/kg, respectively. Device operation is intended for indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application eGsvrCwAw3z+kT9kq/ngig==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 03/11/2023

Application Dated: 03/10/2023
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-RTL8852BE
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: 11ax RTL8852BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.018  
CC MO 15C 2412.0  -  2472.0 0.308  

Single Modular Approval. Output power listed is conducted. This device has 20 MHz and 40 MHz bandwidth modes. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P168G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.82 W/kg and 1.32 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application eGsvrCwAw3z+kT9kq/ngig==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 03/11/2023

Application Dated: 03/10/2023
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-RTL8852BE
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: 11ax RTL8852BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.018  
CC MO 15C 2412.0  -  2472.0 0.308  

Single Modular Approval. Output power listed is conducted. This device has 20 MHz and 40 MHz bandwidth modes. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P168G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.82 W/kg and 1.32 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application CIr128YgcA+DoiUN2b/gbw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 12/25/2022

Application Dated: 12/14/2022
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-RTL8852BE
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: 11ax RTL8852BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.018  
CC MO 15C 2412.0  -  2472.0 0.308  

Single Modular Approval. Output power listed is conducted. This device has 20 MHz and 40 MHz bandwidth modes. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application CIr128YgcA+DoiUN2b/gbw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 12/25/2022

Application Dated: 12/14/2022
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-RTL8852BE
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: 11ax RTL8852BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.018  
CC MO 15C 2412.0  -  2472.0 0.308  

Single Modular Approval. Output power listed is conducted. This device has 20 MHz and 40 MHz bandwidth modes. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application akMxelU6wBNmU21c9iKifw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 03/11/2023

Application Dated: 03/11/2023
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-RTL8852BE
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: 11ax RTL8852BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.018  
CC MO 15C 2412.0  -  2472.0 0.308  

Single Modular Approval. Output power listed is conducted. This device has 20 MHz and 40 MHz bandwidth modes. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P182G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.08 W/kg and 1.13 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application akMxelU6wBNmU21c9iKifw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 03/11/2023

Application Dated: 03/11/2023
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-RTL8852BE
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: 11ax RTL8852BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.018  
CC MO 15C 2412.0  -  2472.0 0.308  

Single Modular Approval. Output power listed is conducted. This device has 20 MHz and 40 MHz bandwidth modes. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P182G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.08 W/kg and 1.13 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 9lNLOtlIHAQglcnXc4of4Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 03/11/2023

Application Dated: 03/11/2023
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-RTL8852BE
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 11ax RTL8852BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.247  
CC MO ND 15E 5260.0  -  5320.0 0.249  
CC MO ND 15E 5500.0  -  5720.0 0.245  
CC MO 15E 5745.0  -  5825.0 0.348  
CC EP MO 15E 5845.0  -  5885.0 0.764  

Single Modular Approval. Output power listed is conducted. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Permissive Change: to enable the U-NII-4 and U-NII-3 & -4 span channels through software change and to address the SAR evaluation at 5mm minimum test separation distance as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.73 W/kg and 1.01 W/kg, respectively. Device operation is intended for indoor use only.

Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P182G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.19 W/kg and 1.19 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 9lNLOtlIHAQglcnXc4of4Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 03/11/2023

Application Dated: 03/11/2023
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-RTL8852BE
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 11ax RTL8852BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.247  
CC MO ND 15E 5260.0  -  5320.0 0.249  
CC MO ND 15E 5500.0  -  5720.0 0.245  
CC MO 15E 5745.0  -  5825.0 0.348  
CC EP MO 15E 5845.0  -  5885.0 0.764  

Single Modular Approval. Output power listed is conducted. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II Permissive Change: to enable the U-NII-4 and U-NII-3 & -4 span channels through software change and to address the SAR evaluation at 5mm minimum test separation distance as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.73 W/kg and 1.01 W/kg, respectively. Device operation is intended for indoor use only.

Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P182G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.19 W/kg and 1.19 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 8MY9R/dK+H7TFqsEyMs4oA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 03/11/2023

Application Dated: 03/10/2023
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-RTL8852BE
Name of Grantee:  Dell Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 11ax RTL8852BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.018  

Single Modular Approval. Output power listed is conducted. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P168G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.18 W/kg and 0.49 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 8MY9R/dK+H7TFqsEyMs4oA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 03/11/2023

Application Dated: 03/10/2023
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-RTL8852BE
Name of Grantee:  Dell Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 11ax RTL8852BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.018  

Single Modular Approval. Output power listed is conducted. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P168G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.18 W/kg and 0.49 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: