FCC ID E2K-WUBR-507N

802.11abgn USB Module

by Dell Inc.

Grantee Code: E2K   Product Code: WUBR507N
Latest application date: 2014-09-17

FCC ID Device Details

FCC IDE2K-WUBR-507N
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeE2K
Product CodeWUBR507N
Applicant BusinessDell Inc. 🇺🇸
Related Domains dell.com
Equipment Class802.11abgn USB Module
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: RYK-WUBR507N Grant Date: 11/24/20102014-09-17
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: RYK-WUBR507N Grant Date: 11/24/20102014-09-17

Exhibits

DocumentTypeAvailableFile
ext photosExternal Photos2014-09-17PDF 3.1 MB
labelID Label/Location Info2014-09-17PDF 36.7 KB
Change in IDCover Letter(s)2014-09-17PDF 28.5 KB
PoACover Letter(s)2014-09-17PDF 41.5 KB
PoA for Dell employeesCover Letter(s)2014-09-17PDF 39.5 KB
PoA from GranteeCover Letter(s)2014-09-17PDF 132.2 KB

Application Information

Application IDxCWCX5L+H43xX6pSVLKsPA==
Final Action Date2014-09-17
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: RYK-WUBR507N Grant Date: 11/24/2010
Applicant FRN0008359580
ModelWUBR-507N
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11abgn USB Module
Responsible PartyDon A Bobo, Distinguished Member of Technical Staff, don_bobo@dell.com , 512-728-5508
AgentWayne Wayne Wayne, Sporton Int Inc, wayne@sporton.com.tw , 88633273456
Test FirmAlex Chen, Sporton International Inc., alex@sporton.com.tw , 886-3-327-3456
TCB EmailBrandhorst.dirk@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Modular Approval. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Power listed is the maximum combined peak conducted output power. Device is Spatial Multiplexing 2X2 MIMO configurations as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.

Applications

Application IDDatePurpose
xCWCX5L+H43xX6pSVLKsPA==2014-09-17Change in identification of presently authorized equipment. Original FCC ID: RYK-WUBR507N Grant Date: 11/24/2010
CoeWp5CHWyBxoPu7Y5KjGg==2014-09-17Change in identification of presently authorized equipment. Original FCC ID: RYK-WUBR507N Grant Date: 11/24/2010

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.1115CCC, MO
2422-2452 MHz0.0815CCC, MO
5180-5240 MHz0.01615ECC, MO
5190-5230 MHz0.01415ECC, MO
5260-5320 MHz0.01515ECC, MO
5270-5310 MHz0.01415ECC, MO
5500-5580 MHz0.01515ECC, MO
5510-5550 MHz0.01415ECC, MO
5660-5700 MHz0.01415ECC, MO
5670 MHz0.01515ECC, MO
5745-5825 MHz0.01515CCC, MO
5755-5795 MHz0.01515CCC, MO

Grants

TCB Grant - Application xCWCX5L+H43xX6pSVLKsPA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 09/17/2014

Application Dated: 09/17/2014
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-WUBR-507N
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11abgn USB Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.016  
CC MO 15E 5190.0  -  5230.0 0.014  
CC MO 15E 5260.0  -  5320.0 0.015  
CC MO 15E 5270.0  -  5310.0 0.014  
CC MO 15E 5500.0  -  5580.0 0.015  
CC MO 15E 5660.0  -  5700.0 0.014  
CC MO 15E 5510.0  -  5550.0 0.014  
CC MO 15E 5670.0  -  5670.0 0.015  

Limited Modular Approval. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Power listed is the maximum combined peak conducted output power. Device is Spatial Multiplexing 2X2 MIMO configurations as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application xCWCX5L+H43xX6pSVLKsPA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 09/17/2014

Application Dated: 09/17/2014
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-WUBR-507N
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11abgn USB Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.016  
CC MO 15E 5190.0  -  5230.0 0.014  
CC MO 15E 5260.0  -  5320.0 0.015  
CC MO 15E 5270.0  -  5310.0 0.014  
CC MO 15E 5500.0  -  5580.0 0.015  
CC MO 15E 5660.0  -  5700.0 0.014  
CC MO 15E 5510.0  -  5550.0 0.014  
CC MO 15E 5670.0  -  5670.0 0.015  

Limited Modular Approval. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. Power listed is the maximum combined peak conducted output power. Device is Spatial Multiplexing 2X2 MIMO configurations as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application CoeWp5CHWyBxoPu7Y5KjGg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 09/17/2014

Application Dated: 09/17/2014
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-WUBR-507N
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: 802.11abgn USB Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.11  
CC MO 15C 2422.0  -  2452.0 0.08  
CC MO 15C 5745.0  -  5825.0 0.015  
CC MO 15C 5755.0  -  5795.0 0.015  

Limited Modular Approval. Power listed is the maximum combined peak conducted output power. Device is Spatial Multiplexing 2X2 MIMO configurations as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application CoeWp5CHWyBxoPu7Y5KjGg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 09/17/2014

Application Dated: 09/17/2014
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K-WUBR-507N
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: 802.11abgn USB Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.11  
CC MO 15C 2422.0  -  2452.0 0.08  
CC MO 15C 5745.0  -  5825.0 0.015  
CC MO 15C 5755.0  -  5795.0 0.015  

Limited Modular Approval. Power listed is the maximum combined peak conducted output power. Device is Spatial Multiplexing 2X2 MIMO configurations as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: