FCC ID E2K24BNHM

Notebook PC with Intel PRO/Wireless 2200BG WLAN

by Dell Inc.

Grantee Code: E2K   Product Code: 24BNHM
Latest application date: 2005-10-24

FCC ID Device Details

FCC IDE2K24BNHM
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeE2K
Product Code24BNHM
Applicant BusinessDell Inc. 🇺🇸
Related Domains dell.com
Equipment ClassNotebook PC with Intel PRO/Wireless 2200BG WLAN
Test FirmAEGIS Labs, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-10-24
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-10-21
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-05-12
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-05-09
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-05-04
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-05-04
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-04-30
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-04-29
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-04-29
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-04-29
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-04-29
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-04-28
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-04-28
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-04-28
2412-2462 MHzOriginal Equipment2005-04-27
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-04-27

Exhibits

DocumentTypeAvailableFile
Regulatory GuideUsers Manual2005-05-09PDF 292.8 KB
Users Manual DellUsers Manual2005-05-09PDF 2.4 MB
User Manual NotebookUsers Manual2005-04-27PDF 2.3 MB
Users Manual WLANUsers Manual2005-04-27PDF 292.8 KB
WLAN Regulatory InformationUsers Manual2005-04-27PDF 290.2 KB
Internal PhotosInternal Photos2005-10-24PDF 397.1 KB
Internal PhotosInternal Photos2005-10-21PDF 397.1 KB
Internal PhotosInternal Photos2005-05-12PDF 398.1 KB
Internal PhotosInternal Photos2005-05-09PDF 1,005 KB
Internal PhotosInternal Photos2005-05-04PDF 398 KB
Internal PhotosInternal Photos2005-04-30PDF 398.1 KB
External PhotosExternal Photos2005-10-24PDF 130.5 KB
External PhotosExternal Photos2005-10-21PDF 142.9 KB
External PhotosExternal Photos2005-05-12PDF 177.7 KB
External PhotosExternal Photos2005-05-09PDF 405.8 KB
External PhotosExternal Photos2005-05-04PDF 111.4 KB
External PhotosExternal Photos2005-05-04PDF 126.6 KB
External PhotosExternal Photos2005-04-30PDF 106.3 KB
External PhotosExternal Photos2005-04-29PDF 101.1 KB
External PhotosExternal Photos2005-04-29PDF 132.2 KB
External PhotosExternal Photos2005-04-29PDF 139.2 KB
External PhotosExternal Photos2005-04-29PDF 135.7 KB
External PhotosExternal Photos2005-04-28PDF 147.2 KB
External PhotosExternal Photos2005-04-28PDF 155.8 KB
External PhotosExternal Photos2005-04-28PDF 167.1 KB
External PhotosExternal Photos2005-04-27PDF 163 KB
External PhotosExternal Photos2005-04-27PDF 155.3 KB
Label Location and SampleID Label/Location Info2005-10-24PDF 688.2 KB
Label Location and SampleID Label/Location Info2005-10-21PDF 688.2 KB
Label Location and SampleID Label/Location Info2005-05-12PDF 555.1 KB
Label Location and SampleID Label/Location Info2005-05-09PDF 314.9 KB
Label Location and SampleID Label/Location Info2005-05-04PDF 533.9 KB
Label Location and SampleID Label/Location Info2005-05-04PDF 533.9 KB
Label Location and SampleID Label/Location Info2005-04-30PDF 754.9 KB
Label Location and SampleID Label/Location Info2005-04-29PDF 529.7 KB
Label Location and SampleID Label/Location Info2005-04-29PDF 534.2 KB
Label Location and SampleID Label/Location Info2005-04-29PDF 531.5 KB
Label Location and SampleID Label/Location Info2005-04-29PDF 546.7 KB
Label LocationID Label/Location Info2005-04-28PDF 25.3 KB
Label Location and SampleID Label/Location Info2005-04-28PDF 549.8 KB
Label Location and SampleID Label/Location Info2005-04-28PDF 549.9 KB
Label SampleID Label/Location Info2005-04-28PDF 473.6 KB
Label LocationID Label/Location Info2005-04-27PDF 48.2 KB
Label LocationID Label/Location Info2005-04-27PDF 50.1 KB
Label SampleID Label/Location Info2005-04-27PDF 479.2 KB
Label Sample 1ID Label/Location Info2005-04-27PDF 169.9 KB
Label Sample 2ID Label/Location Info2005-04-27PDF 348.8 KB
Test Setup PhotosTest Setup Photos2005-10-24PDF 243.6 KB
Test Setup PhotosTest Setup Photos2005-10-21PDF 255.4 KB
Test Setup PhotosTest Setup Photos2005-05-12PDF 270.7 KB
Test Setup Photos HitachiTest Setup Photos2005-05-09PDF 390 KB
Test Setup Photos PhycompTest Setup Photos2005-05-09PDF 424.9 KB
Test Setup PhotosTest Setup Photos2005-05-04PDF 248.2 KB
Test Setup PhotosTest Setup Photos2005-05-04PDF 289.8 KB
Test Setup PhotosTest Setup Photos2005-04-30PDF 261.4 KB
Test Setup PhotosTest Setup Photos2005-04-29PDF 275.2 KB
Test Setup PhotosTest Setup Photos2005-04-29PDF 438.2 KB
Test Setup PhotosTest Setup Photos2005-04-29PDF 271.3 KB
Test Setup PhotosTest Setup Photos2005-04-29PDF 252.6 KB
Test Setup PhotosTest Setup Photos2005-04-28PDF 328.6 KB
Test Setup PhotosTest Setup Photos2005-04-28PDF 368 KB
Test Setup PhotosTest Setup Photos2005-04-28PDF 335.1 KB
Test Setup PhotosTest Setup Photos2005-04-27PDF 379 KB
Test Setup PhotosTest Setup Photos2005-04-27PDF 343.1 KB
Test ReportTest Report2005-10-24PDF 799.7 KB
Test ReportTest Report2005-10-21PDF 799.1 KB
Test ReportTest Report2005-05-12PDF 1.3 MB
Test Report Hitachi 1Test Report2005-05-09PDF 717.5 KB
Test Report Hitachi 2Test Report2005-05-09PDF 1.2 MB
Test Report Hitachi 3Test Report2005-05-09PDF 2.1 MB
Test Report Phycomp 1Test Report2005-05-09PDF 718.1 KB
Test Report Phycomp 3Test Report2005-05-09PDF 2.1 MB
Test Reprot Phycomp 2Test Report2005-05-09PDF 963.6 KB
Test ReportTest Report2005-05-04PDF 817.3 KB
Test ReportTest Report2005-05-04PDF 1.3 MB
Test ReportTest Report2005-04-30PDF 1.2 MB
Test ReportTest Report2005-04-29PDF 1.3 MB
Test ReportTest Report2005-04-29PDF 1.3 MB
Test ReportTest Report2005-04-29PDF 1.3 MB
Test ReportTest Report2005-04-29PDF 1.9 MB
Test ReportTest Report2005-04-28PDF 1.2 MB
Test ReportTest Report2005-04-28PDF 1 MB
Test ReportTest Report2005-04-28PDF 1 MB
Test ReportTest Report2005-04-27PDF 1 MB
Test Report Metadata onlyTest Report2005-04-27PDF 796.6 KB
Test Report RevisedTest Report2005-04-27PDF 797.3 KB
Attestation StatementsCover Letter(s)2005-05-12PDF 41.9 KB
Attestation StatementsAttestation Statements2005-04-28PDF 41.9 KB
Modular Approval LetterAttestation Statements2005-04-28PDF 91.8 KB
Modular Approval LetterAttestation Statements2005-04-28PDF 91.8 KB
Attestation StatementAttestation Statements2005-04-27PDF 41.9 KB
Modular Approval LetterAttestation Statements2005-04-27PDF 92.2 KB
Cover LetterCover Letter(s)2005-10-24PDF 74.5 KB
Cover LettersCover Letter(s)2005-10-24PDF 819.9 KB
Cover LetterCover Letter(s)2005-10-21PDF 74.9 KB
Cover LettersCover Letter(s)2005-10-21PDF 819.9 KB
Authorization LetterCover Letter(s)2005-05-12PDF 702.1 KB
Cover LetterCover Letter(s)2005-05-12PDF 90.1 KB
Modular Approval LetterCover Letter(s)2005-05-12PDF 91.8 KB
Authorization LetterCover Letter(s)2005-05-09PDF 64.7 KB
ConfidentialityCover Letter(s)2005-05-09PDF 66.3 KB
Cover LetterCover Letter(s)2005-05-09PDF 96.9 KB
Cover LetterCover Letter(s)2005-05-04PDF 90.1 KB
Cover LetterCover Letter(s)2005-05-04PDF 90.1 KB
Cover LettersCover Letter(s)2005-05-04PDF 820.3 KB
Cover LettersCover Letter(s)2005-05-04PDF 821.5 KB
Cover LetterCover Letter(s)2005-04-30PDF 90.1 KB
Cover LettersCover Letter(s)2005-04-30PDF 821.9 KB
Cover LetterCover Letter(s)2005-04-29PDF 90 KB
Cover LetterCover Letter(s)2005-04-29PDF 90 KB
Cover LetterCover Letter(s)2005-04-29PDF 89.9 KB
Cover LetterCover Letter(s)2005-04-29PDF 90 KB
Cover LettersCover Letter(s)2005-04-29PDF 863.5 KB
Cover LettersCover Letter(s)2005-04-29PDF 863.8 KB
Cover LettersCover Letter(s)2005-04-29PDF 864.2 KB
Cover LettersCover Letter(s)2005-04-29PDF 863.8 KB
AuthorizationCover Letter(s)2005-04-28PDF 702.1 KB
Cover LetterCover Letter(s)2005-04-28PDF 90.2 KB
Cover LetterCover Letter(s)2005-04-28PDF 90 KB
Cover LettersCover Letter(s)2005-04-28PDF 629.9 KB
Response LetterCover Letter(s)2005-04-28PDF 74.3 KB
Bios LockCover Letter(s)2005-04-27PDF 140.6 KB
ConfidentialityCover Letter(s)2005-04-27PDF 49 KB
Cover LetterCover Letter(s)2005-04-27PDF 90.7 KB
Cover LetterCover Letter(s)2005-04-27PDF 90 KB
Label Installation GuideCover Letter(s)2005-04-27PDF 859.4 KB
Modular Approval LetterCover Letter(s)2005-04-27PDF 92.5 KB
Response LetterCover Letter(s)2005-04-27PDF 74.4 KB
RF Exposure Info AntennaRF Exposure Info2005-10-24PDF 524.7 KB
RF Exposure MPERF Exposure Info2005-10-24PDF 106.7 KB
RF Exposure Info AntennaRF Exposure Info2005-10-21PDF 642.5 KB
RF Exposure MPERF Exposure Info2005-10-21PDF 106.6 KB
RF Exposure Hitachi AntennaRF Exposure Info2005-05-12PDF 239.8 KB
RF Exposure SAR Hitachi 1RF Exposure Info2005-05-12PDF 1 MB
RF Exposure SAR Hitachi 2RF Exposure Info2005-05-12PDF 1.4 MB
RF Exposure SAR Hitachi 3RF Exposure Info2005-05-12PDF 534.9 KB
RF Exposure SAR WNC 1RF Exposure Info2005-05-12PDF 1 MB
RF Exposure SAR WNC 2RF Exposure Info2005-05-12PDF 1.4 MB
RF Exposure SAR WNC 3RF Exposure Info2005-05-12PDF 534.9 KB
RF Exposure WNC AntennaRF Exposure Info2005-05-12PDF 2.6 MB
Antenna DistanceRF Exposure Info2005-05-09PDF 157.9 KB
MPE CalculationsRF Exposure Info2005-05-09PDF 64.8 KB
RF Exposure Hitachi AntennaRF Exposure Info2005-05-09PDF 476.3 KB
RF Exposure Phycomp AntennaRF Exposure Info2005-05-09PDF 636.6 KB
Antenna Info HitachiRF Exposure Info2005-05-04PDF 562.6 KB
Antenna Info WNCRF Exposure Info2005-05-04PDF 614.8 KB
MPE CalculationsRF Exposure Info2005-05-04PDF 107.1 KB
RF Exposure Antenna HitachiRF Exposure Info2005-05-04PDF 401.6 KB
RF Exposure Antenna MalibuRF Exposure Info2005-05-04PDF 84.9 KB
RF Exposure SAR HitachiRF Exposure Info2005-05-04PDF 3.3 MB
RF Exposure SAR WNCRF Exposure Info2005-05-04PDF 3.2 MB
RF Exposure Antenna HitachiRF Exposure Info2005-04-30PDF 25.7 KB
RF Exposure Antenna WNCRF Exposure Info2005-04-30PDF 527 KB
RF Exposure SAR HitachiRF Exposure Info2005-04-30PDF 3 MB
RF Exposure SAR WNCRF Exposure Info2005-04-30PDF 3 MB
Antenna DistanceRF Exposure Info2005-04-29PDF 72.9 KB
MPE CalculationsRF Exposure Info2005-04-29PDF 107.8 KB
MPE CalculationsRF Exposure Info2005-04-29PDF 107.8 KB
MPE CalculationsRF Exposure Info2005-04-29PDF 107.8 KB
MPE CalculationsRF Exposure Info2005-04-29PDF 107.8 KB
RF Exposure Antenna FoxconnRF Exposure Info2005-04-29PDF 460.3 KB
RF Exposure Antenna FoxconnRF Exposure Info2005-04-29PDF 491.9 KB
RF Exposure Antenna PhycompRF Exposure Info2005-04-29PDF 424.9 KB
RF Exposure Antenna PhycompRF Exposure Info2005-04-29PDF 1.1 MB
RF Exposure Antenna WNCRF Exposure Info2005-04-29PDF 517.2 KB
RF Exposure Antenna WNCRF Exposure Info2005-04-29PDF 1.5 MB
RF Exposure Antenna WNCRF Exposure Info2005-04-29PDF 483.1 KB
RF Exposure Antenna WNCRF Exposure Info2005-04-29PDF 559.1 KB
Antenna Info WNCRF Exposure Info2005-04-28PDF 540.4 KB
MPE CalculationsRF Exposure Info2005-04-28PDF 108.2 KB
MPE CalculationsRF Exposure Info2005-04-28PDF 108.2 KB
RF Exposure Antenna HannStarRF Exposure Info2005-04-28PDF 741.1 KB
RF Exposure Antenna HitachiRF Exposure Info2005-04-28PDF 505.3 KB
RF Exposure Antenna WNCRF Exposure Info2005-04-28PDF 1.1 MB
RF Exposure SAR 1RF Exposure Info2005-04-28PDF 1.2 MB
RF Exposure SAR 2RF Exposure Info2005-04-28PDF 3 MB
RF Exposure WNC AntennaRF Exposure Info2005-04-28PDF 1.5 MB
Antenna FoxconnRF Exposure Info2005-04-27PDF 470.2 KB
Antenna FoxconnRF Exposure Info2005-04-27PDF 426.7 KB
Antenna HitachiRF Exposure Info2005-04-27PDF 466 KB
Antenna HitachiRF Exposure Info2005-04-27PDF 471.8 KB
MPE CalculationsRF Exposure Info2005-04-27PDF 108.1 KB
MPE CalculationsRF Exposure Info2005-04-27PDF 108.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 103.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 115.1 KB
Schematics Metadata onlySchematicsPDF 1,008.9 KB
Schematics Metadata onlySchematicsPDF 984.9 KB
Description Metadata onlyOperational DescriptionPDF 196.5 KB
Discription Metadata onlyOperational DescriptionPDF 216.6 KB

Application Information

Application IDT7idJeCmv6nQ30HpjvpGZg==
Final Action Date2005-10-24
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0008359580
Model24BNHM
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionNotebook PC with Intel PRO/Wireless 2200BG WLAN
Responsible PartyDon A Bobo, Distinguished Member of Technical Staff, don_bobo@dell.com , 512-728-5508
Technical ContactJohnny Candelas, Aegis Labs, Inc., johnny@aegislabsinc.com , 949-459-7886
Test FirmSteve Kuiper, AEGIS Labs, Inc., steve@aegislabsinc.com , 949-454-8295
TCB Emailhotline@americantcb.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing. This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

Applications

Application IDDatePurpose
T7idJeCmv6nQ30HpjvpGZg==2005-10-24Class II permissive change or modification of presently authorized equipment
7kJaMubO70lcuL0bh6Xzcw==2005-10-21Class II permissive change or modification of presently authorized equipment
LePh4uy37gcLWEVW7zQKRQ==2005-05-12Class II permissive change or modification of presently authorized equipment
QxpfC4PGr2/XL9+RZERgig==2005-05-09Class II permissive change or modification of presently authorized equipment
lOOVSdvJv4UJzVpbHT0urA==2005-05-04Class II permissive change or modification of presently authorized equipment
JPYwR/mF9uxcGfct0l1w1A==2005-05-04Class II permissive change or modification of presently authorized equipment
DxKJAyDN5+SCY0ASY2y9ig==2005-04-30Class II permissive change or modification of presently authorized equipment
yTq8/wqCq5hUbWQ4qwYGBw==2005-04-29Class II permissive change or modification of presently authorized equipment
w4MVYEBnAG2jkUw396yZHA==2005-04-29Class II permissive change or modification of presently authorized equipment
pbGcbqVkn8slkhTxikgraw==2005-04-29Class II permissive change or modification of presently authorized equipment
FBcy2N7cTUvI2zVvuU8HYA==2005-04-29Class II permissive change or modification of presently authorized equipment
iM2424mOEH8Jez5lnZ1vjg==2005-04-28Class II permissive change or modification of presently authorized equipment
d3ZgwFleVw2pvL4boo6lqw==2005-04-28Class II permissive change or modification of presently authorized equipment
3Cl8TaDevxrETvxK/6jfDw==2005-04-28Class II permissive change or modification of presently authorized equipment
za1oQWw2UoG7tLI8Xdy5Og==2005-04-27Original Equipment
Fe4MOyQYv5hvOu4g4e0IaQ==2005-04-27Class II permissive change or modification of presently authorized equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.050000015C

Grants

TCB Grant - Application za1oQWw2UoG7tLI8Xdy5Og==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/27/2005

Application Dated: 04/27/2005
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.


EAS Grant - Application za1oQWw2UoG7tLI8Xdy5Og==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 04/27/2005

Application Dated: 04/27/2005
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.



TCB Grant - Application yTq8/wqCq5hUbWQ4qwYGBw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/29/2005

Application Dated: 04/29/2005
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.


EAS Grant - Application yTq8/wqCq5hUbWQ4qwYGBw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 04/29/2005

Application Dated: 04/29/2005
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.



TCB Grant - Application w4MVYEBnAG2jkUw396yZHA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/29/2005

Application Dated: 04/29/2005
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.


EAS Grant - Application w4MVYEBnAG2jkUw396yZHA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 04/29/2005

Application Dated: 04/29/2005
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.



TCB Grant - Application T7idJeCmv6nQ30HpjvpGZg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 10/24/2005

Application Dated: 10/24/2005
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Notebook PC with Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.


EAS Grant - Application T7idJeCmv6nQ30HpjvpGZg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 10/24/2005

Application Dated: 10/24/2005
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Notebook PC with Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.



TCB Grant - Application QxpfC4PGr2/XL9+RZERgig==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/09/2005

Application Dated: 05/09/2005
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.


EAS Grant - Application QxpfC4PGr2/XL9+RZERgig==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 05/09/2005

Application Dated: 05/09/2005
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.



TCB Grant - Application pbGcbqVkn8slkhTxikgraw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/29/2005

Application Dated: 04/29/2005
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.


EAS Grant - Application pbGcbqVkn8slkhTxikgraw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 04/29/2005

Application Dated: 04/29/2005
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.



TCB Grant - Application lOOVSdvJv4UJzVpbHT0urA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/04/2005

Application Dated: 05/04/2005
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.


EAS Grant - Application lOOVSdvJv4UJzVpbHT0urA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 05/04/2005

Application Dated: 05/04/2005
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.



TCB Grant - Application LePh4uy37gcLWEVW7zQKRQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/12/2005

Application Dated: 05/12/2005
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 1.066 W/kg.


EAS Grant - Application LePh4uy37gcLWEVW7zQKRQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 05/12/2005

Application Dated: 05/12/2005
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 1.066 W/kg.



TCB Grant - Application JPYwR/mF9uxcGfct0l1w1A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/04/2005

Application Dated: 05/04/2005
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.


EAS Grant - Application JPYwR/mF9uxcGfct0l1w1A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 05/04/2005

Application Dated: 05/04/2005
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.



TCB Grant - Application iM2424mOEH8Jez5lnZ1vjg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/28/2005

Application Dated: 04/28/2005
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.


EAS Grant - Application iM2424mOEH8Jez5lnZ1vjg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 04/28/2005

Application Dated: 04/28/2005
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.



TCB Grant - Application Fe4MOyQYv5hvOu4g4e0IaQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/27/2005

Application Dated: 04/27/2005
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.


EAS Grant - Application Fe4MOyQYv5hvOu4g4e0IaQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 04/27/2005

Application Dated: 04/27/2005
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.



TCB Grant - Application FBcy2N7cTUvI2zVvuU8HYA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/29/2005

Application Dated: 04/29/2005
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.


EAS Grant - Application FBcy2N7cTUvI2zVvuU8HYA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 04/29/2005

Application Dated: 04/29/2005
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.



TCB Grant - Application DxKJAyDN5+SCY0ASY2y9ig==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/30/2005

Application Dated: 04/30/2005
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.


EAS Grant - Application DxKJAyDN5+SCY0ASY2y9ig==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 04/30/2005

Application Dated: 04/30/2005
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.



TCB Grant - Application d3ZgwFleVw2pvL4boo6lqw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/28/2005

Application Dated: 04/28/2005
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.


EAS Grant - Application d3ZgwFleVw2pvL4boo6lqw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 04/28/2005

Application Dated: 04/28/2005
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.



TCB Grant - Application 7kJaMubO70lcuL0bh6Xzcw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 10/21/2005

Application Dated: 10/21/2005
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Notebook PC with Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.


EAS Grant - Application 7kJaMubO70lcuL0bh6Xzcw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 10/21/2005

Application Dated: 10/21/2005
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Notebook PC with Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.



TCB Grant - Application 3Cl8TaDevxrETvxK/6jfDw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/28/2005

Application Dated: 04/28/2005
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.


EAS Grant - Application 3Cl8TaDevxrETvxK/6jfDw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States
  Date of Grant: 04/28/2005

Application Dated: 04/28/2005
 
Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K24BNHM
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 2200BG WLAN
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.05  

Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific notebook computer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in the original filing.

This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.990 W/kg.



Mail To: