1. FCC ID
  2. E2K
  3. E2K533ANH

FCC ID E2K533ANH

Intel Wi-Fi Link 5300 Series

by Dell Inc.

Grantee Code: E2K   Product Code: 533ANH
Latest application date: 2010-02-11

FCC ID Device Details

FCC IDE2K533ANH
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeE2K
Product Code533ANH
Applicant BusinessDell Inc. 🇺🇸
Related Domains dell.com
Equipment ClassIntel Wi-Fi Link 5300 Series
Test FirmCompliance Certification Services

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2010-02-11
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2010-02-11
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2009-09-30
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2009-09-30
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2009-08-31
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2009-08-31
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2009-08-14
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2009-08-14
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2009-06-11
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2009-06-11
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2009-04-23
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2009-04-23
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2009-01-28
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2009-01-28
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2008-11-17
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2008-11-17
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2008-11-13
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2008-11-13
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2008-11-12
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2008-11-12
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2008-10-01
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2008-10-01
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2008-09-29
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2008-09-29
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2008-09-18
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2008-09-18
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2008-09-08
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2008-09-08
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2008-08-05
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2008-08-05
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2008-07-08
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2008-07-08
2412-2462 MHzOriginal Equipment2008-06-25
5180-5240 MHzOriginal Equipment2008-06-25

Exhibits

DocumentTypeAvailableFile
User Manual 1Users Manual2010-08-10PDF 1.3 MB
Users Manual 2Users Manual2010-08-10PDF 1.3 MB
User Manual 1Users Manual2009-07-26PDF 1.9 MB
User Manual 2Users Manual2009-07-26PDF 2.1 MB
User ManualUsers Manual2009-01-04PDF 2.2 MB
Users manual IUsers Manual2008-11-13PDF 1.9 MB
users manual IIUsers Manual2008-11-13PDF 2.1 MB
Internal PhotosInternal Photos2010-08-10PDF 347.2 KB
Internal PhotosInternal Photos2009-07-26PDF 347.2 KB
Internal PhotosInternal Photos2009-01-31PDF 818.1 KB
Internal Photos 1Internal Photos2009-01-04PDF 1.5 MB
Internal Photos 2Internal Photos2009-01-04PDF 1.6 MB
Internal PhotosInternal Photos2008-11-13PDF 346.9 KB
External PhotosExternal Photos2010-08-10PDF 177.2 KB
External PhotosExternal Photos2009-09-30PDF 2.3 MB
External PhotosExternal Photos2009-07-26PDF 177.2 KB
External PhotosExternal Photos2009-01-31PDF 485.2 KB
External PhotosExternal Photos2008-11-13PDF 177 KB
ext photosExternal Photos2008-11-13PDF 177.2 KB
Label and LocationID Label/Location Info2009-09-30PDF 634.5 KB
Label and LocationID Label/Location Info2008-11-13PDF 571.8 KB
Label LocationID Label/Location Info2008-08-05PDF 571.8 KB
Label and LocationID Label/Location Info2008-07-08PDF 643.9 KB
Label and LocationID Label/Location Info2008-06-25PDF 571.8 KB
Antenna Spec DescriptionOperational Description2010-02-11PDF 91.3 KB
Antenna Spec DescriptionOperational Description2010-02-11PDF 413.4 KB
Docking Spec DescriptionOperational Description2010-02-11PDF 413.4 KB
Docking Spec DescriptionOperational Description2010-02-11PDF 91.3 KB
Description 1Operational Description2009-06-11PDF 3.3 MB
Description 2Operational Description2009-06-11PDF 1.3 MB
Test Setup PhotosTest Setup Photos2010-08-10PDF 233.3 KB
Test Setup PhotosTest Setup Photos2009-10-12PDF 313 KB
Test Setup PhotosTest Setup Photos2009-09-28PDF 521.7 KB
Test Setup PhotosTest Setup Photos2009-07-26PDF 527.2 KB
Test Setup PhotosTest Setup Photos2009-07-23PDF 598.5 KB
Test Setup PhotosTest Setup Photos2009-01-31PDF 704.9 KB
Test Setup PhotosTest Setup Photos2009-01-04PDF 2 MB
Test Setup PhotosTest Setup Photos2008-12-22PDF 455.4 KB
Test Setup PhotosTest Setup Photos2008-12-22PDF 2.9 MB
Test Setup PhotosTest Setup Photos2008-11-13PDF 455.2 KB
Test ReportTest Report2010-02-11PDF 919.2 KB
SAR Calibration ReportsTest Report2009-01-28PDF 406.5 KB
Test Report SAR 1Test Report2009-01-28PDF 1.6 MB
Test Report SAR 2Test Report2009-01-28PDF 1.7 MB
Test Report SAR 3Test Report2009-01-28PDF 2.9 MB
Test Report SAR 4Test Report2009-01-28PDF 2.9 MB
Test ReportTest Report2008-11-13PDF 925.4 KB
Test ReportTest Report2008-11-13PDF 1 MB
Test Report DFSTest Report2008-11-13PDF 234.6 KB
Test ReportTest Report2008-08-05PDF 1 MB
Test ReportTest Report2008-08-05PDF 924.4 KB
Test ReportTest Report2008-07-08PDF 906.3 KB
Test ReportTest Report2008-07-08PDF 885.1 KB
Test ReportTest Report2008-06-25PDF 2.1 MB
Test ReportTest Report2008-06-25PDF 2.9 MB
Test Report 1Test Report2008-06-25PDF 1.5 MB
Test Report 2Test Report2008-06-25PDF 2.2 MB
Attestation StatementAttestation Statements2008-11-13PDF 269.6 KB
Attestation StatementsAttestation Statements2008-06-25PDF 269.6 KB
Authorization LetterCover Letter(s)2010-02-11PDF 85.6 KB
Confidentiality LetterCover Letter(s)2010-02-11PDF 78.6 KB
Permissive Change LetterCover Letter(s)2010-02-11PDF 78.9 KB
STC Confidentiality LetterCover Letter(s)2010-02-11PDF 65.2 KB
Authorization LetterCover Letter(s)2009-09-30PDF 38.2 KB
Permissive Change LetterCover Letter(s)2009-09-30PDF 77 KB
Permissive Change LetterCover Letter(s)2009-08-31PDF 77.3 KB
STC Confidentiality LetterCover Letter(s)2009-08-31PDF 57.7 KB
AgencyCover Letter(s)2009-08-14PDF 38.2 KB
Authorization LetterCover Letter(s)2009-08-14PDF 37.7 KB
Permissive Change LetterCover Letter(s)2009-08-14PDF 82.3 KB
Permissive Change LetterCover Letter(s)2009-06-11PDF 34.4 KB
STC Confidentiality LetterCover Letter(s)2009-06-11PDF 40.8 KB
Cover LetterCover Letter(s)2009-04-23PDF 38.2 KB
Permissive Change LetterCover Letter(s)2009-04-23PDF 57.2 KB
Permissive Change LetterCover Letter(s)2009-01-28PDF 34.3 KB
Permissive Change LetterCover Letter(s)2008-11-17PDF 34.3 KB
Authorization LetterCover Letter(s)2008-11-13PDF 297.6 KB
Confidentiality Letter BIOS LockCover Letter(s)2008-11-13PDF 85.9 KB
Cover LetterCover Letter(s)2008-11-13PDF 23.9 KB
DoC LetterCover Letter(s)2008-11-13PDF 23.8 KB
Confidentiality LetterCover Letter(s)2008-11-12PDF 38.5 KB
Permissive Change LetterCover Letter(s)2008-11-12PDF 38.1 KB
Confidentiality LetterCover Letter(s)2008-10-01PDF 72.7 KB
Permissive Change LetterCover Letter(s)2008-10-01PDF 38.1 KB
Permissive Change LetterCover Letter(s)2008-09-29PDF 38.1 KB
Confidentiality LetterCover Letter(s)2008-09-18PDF 38.5 KB
Permissive Change LetterCover Letter(s)2008-09-18PDF 38.1 KB
Confidentiality Letter BIOS LockCover Letter(s)2008-08-05PDF 37.7 KB
Cover LetterCover Letter(s)2008-08-05PDF 23.6 KB
Cover Letter Permissive Change LetterCover Letter(s)2008-08-05PDF 23.6 KB
Short Term Confidentiality LetterCover Letter(s)2008-08-05PDF 40 KB
Cover LetterCover Letter(s)2008-07-08PDF 23.8 KB
STC Confidentiality LetterCover Letter(s)2008-07-08PDF 40 KB
Cover LetterCover Letter(s)2008-06-25PDF 23.8 KB
Modular Approval LetterCover Letter(s)2008-06-25PDF 364.1 KB
RF Exposure MPERF Exposure Info2010-02-11PDF 120.2 KB
RF Exposure Ant Info 1RF Exposure Info2009-09-30PDF 1.3 MB
RF Exposure Ant Info 2RF Exposure Info2009-09-30PDF 1 MB
RF Exposure SAR AmotechRF Exposure Info2009-09-30PDF 2.3 MB
RF Exposure SAR Calibration DataRF Exposure Info2009-09-30PDF 3.7 MB
RF Exposure SAR Calibration InfoRF Exposure Info2009-09-30PDF 3.7 MB
RF Exposure SAR TycoRF Exposure Info2009-09-30PDF 2.8 MB
RF Exposure Ant Info 1RF Exposure Info2009-08-31PDF 1.3 MB
RF Exposure Ant Info 2RF Exposure Info2009-08-31PDF 2 MB
RF Exposure SAR Antenna 1RF Exposure Info2009-08-31PDF 2.3 MB
RF Exposure SAR Antenna 2RF Exposure Info2009-08-31PDF 2.5 MB
RF Exposure SAR CalibrationRF Exposure Info2009-08-31PDF 2.8 MB
RF Exposure SAR Calibration DataRF Exposure Info2009-08-31PDF 2.8 MB
RF Exposure Ant InfoRF Exposure Info2009-08-14PDF 1.3 MB
RF Exposure Info SAR ReportRF Exposure Info2009-08-14PDF 2.1 MB
RF Exposure SAR 1RF Exposure Info2009-06-11PDF 1.6 MB
RF Exposure SAR 2RF Exposure Info2009-06-11PDF 1.7 MB
RF Exposure SAR 3RF Exposure Info2009-06-11PDF 2.2 MB
RF Exposure SAR 1RF Exposure Info2009-04-23PDF 406.5 KB
RF Exposure SAR 2RF Exposure Info2009-04-23PDF 2.1 MB
RF Exposure SAR 3RF Exposure Info2009-04-23PDF 2.1 MB
RF Exposure Ant Info 1RF Exposure Info2009-01-28PDF 1.3 MB
RF Exposure Ant Info 2RF Exposure Info2009-01-28PDF 1.3 MB
RF Exposure Ant Info 3RF Exposure Info2009-01-28PDF 886.5 KB
RF Exposure Ant Info 4RF Exposure Info2009-01-28PDF 829.7 KB
RF Exposure Ant Info 5RF Exposure Info2009-01-28PDF 1.9 MB
RF Exposure Ant Info 6RF Exposure Info2009-01-28PDF 2 MB
RF Exposure Ant Info 7RF Exposure Info2009-01-28PDF 1.9 MB
RF Exposure Ant Info 8RF Exposure Info2009-01-28PDF 1.9 MB
ANT 1RF Exposure Info2008-11-17PDF 1.2 MB
ANT 2RF Exposure Info2008-11-17PDF 1.4 MB
ANT 3RF Exposure Info2008-11-17PDF 992.4 KB
RF Exposure Antenna 1RF Exposure Info2008-11-17PDF 1.2 MB
RF Exposure Antenna 2RF Exposure Info2008-11-17PDF 1.4 MB
RF Exposure Antenna 3RF Exposure Info2008-11-17PDF 992.4 KB
SAR Cal A B CRF Exposure Info2008-11-17PDF 404.2 KB
SAR Report A 1RF Exposure Info2008-11-17PDF 1.6 MB
SAR Report A 2RF Exposure Info2008-11-17PDF 1.7 MB
SAR Report B 1RF Exposure Info2008-11-17PDF 1.9 MB
SAR Report B 2RF Exposure Info2008-11-17PDF 1.7 MB
SAR Report C 1RF Exposure Info2008-11-17PDF 1.5 MB
SAR Report C 2RF Exposure Info2008-11-17PDF 1.6 MB
RF Exposure Antenna DescriptionRF Exposure Info2008-11-13PDF 1 MB
RF Exposure MPERF Exposure Info2008-11-13PDF 122.3 KB
RF Exposure Info Ant 1RF Exposure Info2008-11-12PDF 1.5 MB
RF Exposure Info Ant 2RF Exposure Info2008-11-12PDF 2 MB
RF Exposure Info Ant 3RF Exposure Info2008-11-12PDF 1.9 MB
RF Exposure Info Antenna 3RF Exposure Info2008-11-12PDF 1.9 MB
RF Exposure SAR Calibration DataRF Exposure Info2008-11-12PDF 406.5 KB
RF Exposure SAR Dell with RSBRF Exposure Info2008-11-12PDF 2.6 MB
RF Exposure SAR Tyco with RSBRF Exposure Info2008-11-12PDF 2.7 MB
RF Exposure SAR 1RF Exposure Info2008-10-01PDF 1.8 MB
RF Exposure SAR 2RF Exposure Info2008-10-01PDF 1.6 MB
RF Exposure SAR 3RF Exposure Info2008-10-01PDF 1.5 MB
RF Exposure SAR 4RF Exposure Info2008-10-01PDF 1.6 MB
RF Exposure SAR 5RF Exposure Info2008-10-01PDF 404.2 KB
RF Exposure SAR 1RF Exposure Info2008-09-29PDF 1.4 MB
RF Exposure SAR 2RF Exposure Info2008-09-29PDF 1.6 MB
RF Exposure SAR 3RF Exposure Info2008-09-29PDF 1.5 MB
RF Exposure SAR 4RF Exposure Info2008-09-29PDF 1.5 MB
RF Exposure SAR 1RF Exposure Info2008-09-18PDF 1.6 MB
RF Exposure SAR 2RF Exposure Info2008-09-18PDF 1.6 MB
RF Exposure SAR 3RF Exposure Info2008-09-18PDF 2.8 MB
RF Exposure SAR 4RF Exposure Info2008-09-18PDF 2.8 MB
RF Exposure SAR 5RF Exposure Info2008-09-18PDF 854.6 KB
RF Exposure SAR 1 MC GALRF Exposure Info2008-09-08PDF 1.5 MB
RF Exposure SAR 1 TycoRF Exposure Info2008-09-08PDF 1.8 MB
RF Exposure SAR 2 MC GALRF Exposure Info2008-09-08PDF 2 MB
RF Exposure SAR 2 TycoRF Exposure Info2008-09-08PDF 1.9 MB
RF Exposure SAR 3 MC GALRF Exposure Info2008-09-08PDF 2.3 MB
RF Exposure SAR 3 TycoRF Exposure Info2008-09-08PDF 400.1 KB
RF Exposure SAR 4 MC GALRF Exposure Info2008-09-08PDF 1.9 MB
RF Exposure SAR 4 TycoRF Exposure Info2008-09-08PDF 2 MB
RF Exposure SAR 5 TycoRF Exposure Info2008-09-08PDF 1.9 MB
RF Exposure Antenna InfoRF Exposure Info2008-08-05PDF 1.9 MB
RF Exposure MPERF Exposure Info2008-08-05PDF 122.9 KB
RF Exposure Info 1RF Exposure Info2008-07-08PDF 2.3 MB
RF Exposure Info 10RF Exposure Info2008-07-08PDF 2.3 MB
RF Exposure Info 11RF Exposure Info2008-07-08PDF 2.3 MB
RF Exposure Info 12RF Exposure Info2008-07-08PDF 2.1 MB
RF Exposure Info 13RF Exposure Info2008-07-08PDF 2.2 MB
RF Exposure Info 14RF Exposure Info2008-07-08PDF 537.9 KB
RF Exposure Info 15RF Exposure Info2008-07-08PDF 520 KB
RF Exposure Info 16RF Exposure Info2008-07-08PDF 2.2 MB
RF Exposure Info 17RF Exposure Info2008-07-08PDF 2.5 MB
RF Exposure Info 18RF Exposure Info2008-07-08PDF 2.3 MB
RF Exposure Info 19RF Exposure Info2008-07-08PDF 2.5 MB
RF Exposure Info 2RF Exposure Info2008-07-08PDF 2.6 MB
RF Exposure Info 20RF Exposure Info2008-07-08PDF 1.7 MB
RF Exposure Info 21RF Exposure Info2008-07-08PDF 1.4 MB
RF Exposure Info 22RF Exposure Info2008-07-08PDF 1.6 MB
RF Exposure Info 23RF Exposure Info2008-07-08PDF 2.3 MB
RF Exposure Info 24RF Exposure Info2008-07-08PDF 1.1 MB
RF Exposure Info 25RF Exposure Info2008-07-08PDF 1.2 MB
RF Exposure Info 26RF Exposure Info2008-07-08PDF 2 MB
RF Exposure Info 27RF Exposure Info2008-07-08PDF 1.3 MB
RF Exposure Info 28RF Exposure Info2008-07-08PDF 1.7 MB
RF Exposure Info 29RF Exposure Info2008-07-08PDF 2.6 MB
RF Exposure Info 3RF Exposure Info2008-07-08PDF 1.3 MB
RF Exposure Info 30RF Exposure Info2008-07-08PDF 472.8 KB
RF Exposure Info 31RF Exposure Info2008-07-08PDF 935.5 KB
RF Exposure Info 4RF Exposure Info2008-07-08PDF 356.4 KB
RF Exposure Info 5RF Exposure Info2008-07-08PDF 2.6 MB
RF Exposure Info 6RF Exposure Info2008-07-08PDF 1.9 MB
RF Exposure Info 7RF Exposure Info2008-07-08PDF 1.4 MB
RF Exposure Info 8RF Exposure Info2008-07-08PDF 1.2 MB
RF Exposure Info 9RF Exposure Info2008-07-08PDF 2.4 MB
RF Exposure Antenna Info 1RF Exposure Info2008-06-25PDF 200.9 KB
RF Exposure Antenna Info 2RF Exposure Info2008-06-25PDF 231.6 KB
RF Exposure ColocationRF Exposure Info2008-06-25PDF 50.1 KB
RF Exposure InfoRF Exposure Info2008-06-25PDF 231.6 KB
RF Exposure InfoRF Exposure Info2008-06-25PDF 106.7 KB
RF Exposure MPERF Exposure Info2008-06-25PDF 136.4 KB
RF Exposure MPE 1RF Exposure Info2008-06-25PDF 50.1 KB
RF Exposure MPE 2RF Exposure Info2008-06-25PDF 127.3 KB
RF Exposure MPE RevisedRF Exposure Info2008-06-25PDF 140.2 KB
RF Exposure MPE revisedRF Exposure Info2008-06-25PDF 140.2 KB

Application Information

Application IDEXb5NVOLXWiEMVIIkeEWKA==
Final Action Date2010-02-11
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0016660250
Model533ANH
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionIntel Wi-Fi Link 5300 Series
Responsible PartyRichard Worley, Regulatory Engineer, Richard_Worley@dell.com , 512-728-1081
Technical ContactMichael Heckrotte, Compliance Certification Services, Michael.Heckrotte@ccsemc.com , 510 771 1000
Test FirmThu Chan, Compliance Certification Services, thu.chan@ccsemc.com , 510-771-1122
TCB EmailHotline@atcb.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date08/10/2010
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is aggregate conducted. Limited modular approval. This module is approved for use in the host described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize the Bios Locking and Radio Selection features. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3 x 3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.

Applications

Application IDDatePurpose
EXb5NVOLXWiEMVIIkeEWKA==2010-02-11Class II permissive change or modification of presently authorized equipment
6KjrcdVFN5DhtKu3SZRtwg==2010-02-11Class II permissive change or modification of presently authorized equipment
jjH9Mba0l63VtcNq0/Ws6g==2009-09-30Class II permissive change or modification of presently authorized equipment
O0cSYcq4xb4xWy7DjxU0Yw==2009-09-30Class II permissive change or modification of presently authorized equipment
t8eBYfsz7ZzNjCL2ERywAA==2009-08-31Class II permissive change or modification of presently authorized equipment
R53+BQ9bxIqi3xfD/HVVGA==2009-08-31Class II permissive change or modification of presently authorized equipment
ulQJGeOKxv8O917j2Q0v0A==2009-08-14Class II permissive change or modification of presently authorized equipment
tVlDFYiP1uxMlOFTL4hlPQ==2009-08-14Class II permissive change or modification of presently authorized equipment
PFcpNvws1aWPrBiuCPxEKA==2009-06-11Class II permissive change or modification of presently authorized equipment
0abfEGLfGA/mjTpej4rnnA==2009-06-11Class II permissive change or modification of presently authorized equipment
tCE0izkPqgJj2UGaTLrdEg==2009-04-23Class II permissive change or modification of presently authorized equipment
R42tnOaFILS+DlSIeb6Mjg==2009-04-23Class II permissive change or modification of presently authorized equipment
jzOUlNpprxt14rJYBHfTAQ==2009-01-28Class II permissive change or modification of presently authorized equipment
1s/EEozWXwH76kkPxP6JOg==2009-01-28Class II permissive change or modification of presently authorized equipment
bZHfCy9LTg5cqxpmsMJ2dg==2008-11-17Class II permissive change or modification of presently authorized equipment
H3ZYs7bqgCPQUf1PM96qvg==2008-11-17Class II permissive change or modification of presently authorized equipment
tqAWWC3lldLdA66betI70w==2008-11-13Class II permissive change or modification of presently authorized equipment
2k6Sa/pe4Rw3JC84NHMbwg==2008-11-13Class II permissive change or modification of presently authorized equipment
C87DWe6jz99jR36BS+ssfA==2008-11-12Class II permissive change or modification of presently authorized equipment
4JdZBP5C4g5F4szecw8rbw==2008-11-12Class II permissive change or modification of presently authorized equipment
TyQk1dq8fKEvyP2uQuegPQ==2008-10-01Class II permissive change or modification of presently authorized equipment
JqY6rQ1v7b5neHGgcK5mlQ==2008-10-01Class II permissive change or modification of presently authorized equipment
Oyq4kI5OE/n85tmBR2YeIQ==2008-09-29Class II permissive change or modification of presently authorized equipment
LTFz9EdtIIDCQeZi5oa0Aw==2008-09-29Class II permissive change or modification of presently authorized equipment
zq0vaoOylTD2K9VWnEjdbg==2008-09-18Class II permissive change or modification of presently authorized equipment
TYTQPkYz4BmJnRUEld6z8Q==2008-09-18Class II permissive change or modification of presently authorized equipment
w/01yi5lvqV4PmUUQfAeRg==2008-09-08Class II permissive change or modification of presently authorized equipment
gQPZX1AHWWHmKThU4iCGQA==2008-09-08Class II permissive change or modification of presently authorized equipment
y6PQe/oG3wvgEBLswjfsNA==2008-08-05Class II permissive change or modification of presently authorized equipment
CJm/zrwdpxdyQdG65MoGTA==2008-08-05Class II permissive change or modification of presently authorized equipment
RgboORwrFTki+EVubZJwnA==2008-07-08Class II permissive change or modification of presently authorized equipment
EScsgVgN1G/qLLRysR5JMg==2008-07-08Class II permissive change or modification of presently authorized equipment
U+ZqUJvTpAvvXPGWgTGIEA==2008-06-25Original Equipment
5xouUaSqnpUZE3uBgF6jfw==2008-06-25Original Equipment
2nqhhOxIHJNSAOO2OCNmNg==2008-06-25Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
15BCC
2412-2462 MHz0.43815CCC, MO
5180-5240 MHz0.04515ECC, MO, ND
5180-5240 MHz0.04415ECC, MO
5180-5240 MHz0.04515ECC, MO
5260-5320 MHz0.04515ECC, MO, ND
5260-5320 MHz0.04515ECC, MO
5470-5745 MHz0.04515ECC, MO
5470-5745 MHz0.04515ECC, MO, ND
5500-5700 MHz0.04515ECC, MO, ND
5725-5850 MHz0.44115CCC, MO
5745-5825 MHz0.44115CCC, MO

Grants

TCB Grant - Application zq0vaoOylTD2K9VWnEjdbg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 09/18/2008

Application Dated: 09/18/2008
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5725.0  -  5850.0 0.441  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725 or VV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing. This transmitter is restricted to indoor use only withinthe5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.
Single Modular

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application zq0vaoOylTD2K9VWnEjdbg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 09/18/2008

Application Dated: 09/18/2008
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5725.0  -  5850.0 0.441  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725 or VV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing. This transmitter is restricted to indoor use only withinthe5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.

Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application y6PQe/oG3wvgEBLswjfsNA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 08/05/2008

Application Dated: 08/05/2008
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.045  
CC MO ND 15E 5260.0  -  5320.0 0.045  
CC MO ND 15E 5470.0  -  5745.0 0.045  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725 orVV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing.This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.
Single Modular

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application y6PQe/oG3wvgEBLswjfsNA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 08/05/2008

Application Dated: 08/05/2008
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.045  
CC MO ND 15E 5260.0  -  5320.0 0.045  
CC MO ND 15E 5470.0  -  5745.0 0.045  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725 orVV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing.This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.

Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application w/01yi5lvqV4PmUUQfAeRg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 09/08/2008

Application Dated: 09/08/2008
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5725.0  -  5850.0 0.441  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725 orVV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing. This transmitter is restricted to indoor use only within the5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.
Single Modular

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application w/01yi5lvqV4PmUUQfAeRg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 09/08/2008

Application Dated: 09/08/2008
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5725.0  -  5850.0 0.441  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725 orVV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing. This transmitter is restricted to indoor use only within the5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.

Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ulQJGeOKxv8O917j2Q0v0A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 08/14/2009

Application Dated: 08/14/2009
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.045  
CC MO ND 15E 5260.0  -  5320.0 0.045  
CC MO ND 15E 5500.0  -  5700.0 0.045  

Power Output listed is aggregate conducted. Modular approval. This module is approved for use in the host described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize the Bios Locking and Radio Selection features. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3 x 3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application ulQJGeOKxv8O917j2Q0v0A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 08/14/2009

Application Dated: 08/14/2009
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.045  
CC MO ND 15E 5260.0  -  5320.0 0.045  
CC MO ND 15E 5500.0  -  5700.0 0.045  

Power Output listed is aggregate conducted. Modular approval. This module is approved for use in the host described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize the Bios Locking and Radio Selection features. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3 x 3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application U+ZqUJvTpAvvXPGWgTGIEA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 06/25/2008

Application Dated: 06/23/2008
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5725.0  -  5850.0 0.441  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725 or VV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing.This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application U+ZqUJvTpAvvXPGWgTGIEA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 06/25/2008

Application Dated: 06/23/2008
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5725.0  -  5850.0 0.441  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725 or VV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing.This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application TYTQPkYz4BmJnRUEld6z8Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 09/18/2008

Application Dated: 09/18/2008
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.045  
CC MO ND 15E 5260.0  -  5320.0 0.045  
CC MO ND 15E 5470.0  -  5745.0 0.045  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725 or VV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing.This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.
Single Modular

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application TYTQPkYz4BmJnRUEld6z8Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 09/18/2008

Application Dated: 09/18/2008
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.045  
CC MO ND 15E 5260.0  -  5320.0 0.045  
CC MO ND 15E 5470.0  -  5745.0 0.045  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725 or VV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing.This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.

Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application TyQk1dq8fKEvyP2uQuegPQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 10/01/2008

Application Dated: 09/30/2008
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5725.0  -  5850.0 0.441  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725orVV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing. This transmitter is restricted to indoor useonlywithinthe5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.
Single Modular

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application TyQk1dq8fKEvyP2uQuegPQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 10/01/2008

Application Dated: 09/30/2008
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5725.0  -  5850.0 0.441  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725orVV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing. This transmitter is restricted to indoor useonlywithinthe5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.

Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application tVlDFYiP1uxMlOFTL4hlPQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 08/14/2009

Application Dated: 08/14/2009
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5725.0  -  5850.0 0.441  

Power Output listed is aggregate conducted. Modular approval. This module is approved for use in the host described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize the Bios Locking and Radio Selection features. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3 x 3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application tVlDFYiP1uxMlOFTL4hlPQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 08/14/2009

Application Dated: 08/14/2009
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5725.0  -  5850.0 0.441  

Power Output listed is aggregate conducted. Modular approval. This module is approved for use in the host described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize the Bios Locking and Radio Selection features. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3 x 3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application tqAWWC3lldLdA66betI70w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 11/13/2008

Application Dated: 11/12/2008
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5725.0  -  5850.0 0.441  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725 or VV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking and Radio Selection features as documented in this filing. This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application tqAWWC3lldLdA66betI70w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 11/13/2008

Application Dated: 11/12/2008
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5725.0  -  5850.0 0.441  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725 or VV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking and Radio Selection features as documented in this filing. This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application tCE0izkPqgJj2UGaTLrdEg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 04/23/2009

Application Dated: 04/22/2009
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5725.0  -  5850.0 0.441  

Power Output listed is aggregate conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The module may be co-located with the following FCC ID(s): PKRNVWE725 or VV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking and Radio Selection features as documented in this filing. This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3 x 3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application tCE0izkPqgJj2UGaTLrdEg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 04/23/2009

Application Dated: 04/22/2009
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5725.0  -  5850.0 0.441  

Power Output listed is aggregate conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The module may be co-located with the following FCC ID(s): PKRNVWE725 or VV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking and Radio Selection features as documented in this filing. This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3 x 3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application t8eBYfsz7ZzNjCL2ERywAA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 08/31/2009

Application Dated: 08/28/2009
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.045  
CC MO ND 15E 5260.0  -  5320.0 0.045  
CC MO ND 15E 5500.0  -  5700.0 0.045  

Power Output listed is aggregate conducted. Modular approval. This module is approved for use in the host described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize the Bios Locking and Radio Selection features. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3 x 3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application t8eBYfsz7ZzNjCL2ERywAA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 08/31/2009

Application Dated: 08/28/2009
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.045  
CC MO ND 15E 5260.0  -  5320.0 0.045  
CC MO ND 15E 5500.0  -  5700.0 0.045  

Power Output listed is aggregate conducted. Modular approval. This module is approved for use in the host described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize the Bios Locking and Radio Selection features. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3 x 3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application RgboORwrFTki+EVubZJwnA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 07/08/2008

Application Dated: 07/08/2008
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.044  
CC MO 15E 5260.0  -  5320.0 0.045  
CC MO 15E 5470.0  -  5745.0 0.045  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725 orVV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing.This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.

Single Modular

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application RgboORwrFTki+EVubZJwnA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 07/08/2008

Application Dated: 07/08/2008
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.044  
CC MO 15E 5260.0  -  5320.0 0.045  
CC MO 15E 5470.0  -  5745.0 0.045  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725 orVV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing.This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.

Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application R53+BQ9bxIqi3xfD/HVVGA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 08/31/2009

Application Dated: 08/28/2009
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5745.0  -  5825.0 0.441  

Power Output listed is aggregate conducted. Modular approval. This module is approved for use in the host described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize the Bios Locking and Radio Selection features. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3 x 3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application R53+BQ9bxIqi3xfD/HVVGA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 08/31/2009

Application Dated: 08/28/2009
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5745.0  -  5825.0 0.441  

Power Output listed is aggregate conducted. Modular approval. This module is approved for use in the host described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize the Bios Locking and Radio Selection features. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3 x 3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application R42tnOaFILS+DlSIeb6Mjg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 04/23/2009

Application Dated: 04/22/2009
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.045  
CC MO ND 15E 5260.0  -  5320.0 0.045  
CC MO ND 15E 5500.0  -  5700.0 0.045  

Power Output listed is aggregate conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The module may be co-located with the following FCC ID(s): PKRNVWE725 or VV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking and Radio Selection features as documented in this filing. This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3 x 3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application R42tnOaFILS+DlSIeb6Mjg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 04/23/2009

Application Dated: 04/22/2009
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.045  
CC MO ND 15E 5260.0  -  5320.0 0.045  
CC MO ND 15E 5500.0  -  5700.0 0.045  

Power Output listed is aggregate conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The module may be co-located with the following FCC ID(s): PKRNVWE725 or VV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking and Radio Selection features as documented in this filing. This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3 x 3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application PFcpNvws1aWPrBiuCPxEKA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 06/11/2009

Application Dated: 06/11/2009
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.045  
CC MO ND 15E 5260.0  -  5320.0 0.045  
CC MO ND 15E 5500.0  -  5700.0 0.045  

Power Output listed is aggregate conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The module may be co-located with the following FCC ID(s): PKRNVWE725 or VV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking and Radio Selection features as documented in this filing. This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3 x 3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application PFcpNvws1aWPrBiuCPxEKA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 06/11/2009

Application Dated: 06/11/2009
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.045  
CC MO ND 15E 5260.0  -  5320.0 0.045  
CC MO ND 15E 5500.0  -  5700.0 0.045  

Power Output listed is aggregate conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The module may be co-located with the following FCC ID(s): PKRNVWE725 or VV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking and Radio Selection features as documented in this filing. This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3 x 3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application Oyq4kI5OE/n85tmBR2YeIQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 09/29/2008

Application Dated: 09/29/2008
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5725.0  -  5850.0 0.441  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725 orVV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing. This transmitter is restricted to indoor use onlywithinthe5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.
Single Modular

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Oyq4kI5OE/n85tmBR2YeIQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 09/29/2008

Application Dated: 09/29/2008
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5725.0  -  5850.0 0.441  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725 orVV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing. This transmitter is restricted to indoor use onlywithinthe5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.

Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application O0cSYcq4xb4xWy7DjxU0Yw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 09/30/2009

Application Dated: 09/29/2009
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.045  
CC MO ND 15E 5260.0  -  5320.0 0.045  
CC MO ND 15E 5500.0  -  5700.0 0.045  

Power Output listed is aggregate conducted. Modular approval. This module is approved for use in the host described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize the Bios Locking and Radio Selection features. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3 x 3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application O0cSYcq4xb4xWy7DjxU0Yw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 09/30/2009

Application Dated: 09/29/2009
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.045  
CC MO ND 15E 5260.0  -  5320.0 0.045  
CC MO ND 15E 5500.0  -  5700.0 0.045  

Power Output listed is aggregate conducted. Modular approval. This module is approved for use in the host described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize the Bios Locking and Radio Selection features. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3 x 3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application LTFz9EdtIIDCQeZi5oa0Aw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 09/29/2008

Application Dated: 09/29/2008
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.045  
CC MO ND 15E 5260.0  -  5320.0 0.045  
CC MO ND 15E 5470.0  -  5745.0 0.045  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725 orVV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing.This transmitter is restricted to indoor use only within the5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.
Single Modular

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application LTFz9EdtIIDCQeZi5oa0Aw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 09/29/2008

Application Dated: 09/29/2008
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.045  
CC MO ND 15E 5260.0  -  5320.0 0.045  
CC MO ND 15E 5470.0  -  5745.0 0.045  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725 orVV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing.This transmitter is restricted to indoor use only within the5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.

Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application jzOUlNpprxt14rJYBHfTAQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 01/28/2009

Application Dated: 01/28/2009
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5725.0  -  5850.0 0.441  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitter within a host device,except in accordance with FCC multi-transmitter product procedures. The module may be co-located with the following FCC ID(s): PKRNVWE725 or VV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking and Radio Selection features as documented in this filing. This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3 x 3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application jzOUlNpprxt14rJYBHfTAQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 01/28/2009

Application Dated: 01/28/2009
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.438  
CC MO 15C 5725.0  -  5850.0 0.441  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitter within a host device,except in accordance with FCC multi-transmitter product procedures. The module may be co-located with the following FCC ID(s): PKRNVWE725 or VV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking and Radio Selection features as documented in this filing. This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3 x 3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application JqY6rQ1v7b5neHGgcK5mlQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 10/01/2008

Application Dated: 09/30/2008
Dell Inc.
One Dell Way
Round Rock, TX 78682
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.045  
CC MO ND 15E 5260.0  -  5320.0 0.045  
CC MO ND 15E 5470.0  -  5745.0 0.045  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725orVV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing.This transmitter is restricted to indoor use only withinthe5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.
Single Modular

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application JqY6rQ1v7b5neHGgcK5mlQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dell Inc.
One Dell Way
Round Rock, TX 78682
United States 		  Date of Grant: 10/01/2008

Application Dated: 09/30/2008
 
Attention: Richard Worley , Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E2K533ANH
Name of Grantee:  Dell Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wi-Fi Link 5300 Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.045  
CC MO ND 15E 5260.0  -  5320.0 0.045  
CC MO ND 15E 5470.0  -  5745.0 0.045  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. The module may be co-located with the following FCC ID(s): PKRNVWE725orVV7-MBMF3507G-D as documented in this filing. The final host device must utilize the Bios Locking feature as documented in this filing.This transmitter is restricted to indoor use only withinthe5.15-5.25GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Highest reported SAR value is: 1.565 W/kg.

Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: