FCC ID E2K5HCKT

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 01/12/2005 Application Dated: 01/12/2005

Dell Inc.

One Dell Way

Round Rock, TX 78682

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Digital Transmission System
Notes:	Notebook Computer w/ Intel PRO/Wireless 2195ABG

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.257
CC	15C	5745.0  -  5825.0	0.12589

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 01/12/2005 Application Dated: 01/12/2005

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Digital Transmission System
Notes:	Notebook Computer w/ Intel PRO/Wireless 2195ABG
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.257
CC	15C	5745.0  -  5825.0	0.12589

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Y71NNQ04MNYb2epL805R9g==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 10/19/2005 Application Dated: 10/19/2005

Dell Inc.

One Dell Way

Round Rock, TX 78682

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Notebook Computer w/ Intel PRO/Wireless 2195ABG

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.038

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 10/19/2005 Application Dated: 10/19/2005

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Notebook Computer w/ Intel PRO/Wireless 2195ABG
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.038

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application UCNL7O8XboumLMdduLuTzw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 10/19/2005 Application Dated: 10/19/2005

Dell Inc.

One Dell Way

Round Rock, TX 78682

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Digital Transmission System
Notes:	Notebook Computer w/ Intel PRO/Wireless 2195ABG

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.257
CC	15C	5745.0  -  5825.0	0.12589

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 10/19/2005 Application Dated: 10/19/2005

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Digital Transmission System
Notes:	Notebook Computer w/ Intel PRO/Wireless 2195ABG
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.257
CC	15C	5745.0  -  5825.0	0.12589

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application tbdIixkd3+3DkwvM4xi5mQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 05/04/2005 Application Dated: 05/04/2005

Dell Inc.

One Dell Way

Round Rock, TX 78682

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Digital Transmission System
Notes:	Notebook PC with Intel PRO/Wireless 2195ABG WLAN

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.257
CC	15C	5745.0  -  5825.0	0.12589

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 05/04/2005 Application Dated: 05/04/2005

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Digital Transmission System
Notes:	Notebook PC with Intel PRO/Wireless 2195ABG WLAN
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.257
CC	15C	5745.0  -  5825.0	0.12589

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application R+xijBZ9/r+19KH+Ccr0JA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 01/12/2005 Application Dated: 01/12/2005

Dell Inc.

One Dell Way

Round Rock, TX 78682

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Notebook Computer w/ Intel PRO/Wireless 2195ABG

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.038

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 01/12/2005 Application Dated: 01/12/2005

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Notebook Computer w/ Intel PRO/Wireless 2195ABG
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.038

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application qmWJQQ79HPgQYfyNDTwMIA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 02/10/2005 Application Dated: 02/10/2005

Dell Inc.

One Dell Way

Round Rock, TX 78682

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Notebook PC with Intel PRO/Wireless 2195ABG WLAN

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.038

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 02/10/2005 Application Dated: 02/10/2005

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Notebook PC with Intel PRO/Wireless 2195ABG WLAN
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.038

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application q2LUqS9WMfL8pIDvB9GeaA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 01/06/2005 Application Dated: 01/06/2005

Dell Inc.

One Dell Way

Round Rock, TX 78682

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Digital Transmission System
Notes:	802.11a/b/g Mini PCI Type 3A Card

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.257
CC	15C	5745.0  -  5825.0	0.12589

Class II permissive change filing. "OEM integration only" and "the device cannot be sold to the General Public". This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in the filing. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. -- The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported SAR values are at 2.4 GHz 1.31W/kg, and at 5.8 GHz 1.32W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 01/06/2005 Application Dated: 01/06/2005

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Digital Transmission System
Notes:	802.11a/b/g Mini PCI Type 3A Card
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.257
CC	15C	5745.0  -  5825.0	0.12589

Class II permissive change filing. "OEM integration only" and "the device cannot be sold to the General Public". This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in the filing. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. -- The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported SAR values are at 2.4 GHz 1.31W/kg, and at 5.8 GHz 1.32W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application ooMpLp554mAOgvVRQpaEqg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 01/07/2005 Application Dated: 01/07/2005

Dell Inc.

One Dell Way

Round Rock, TX 78682

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Notebook Computer w/ Intel PRO/Wireless 2195ABG

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.038

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 01/07/2005 Application Dated: 01/07/2005

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Notebook Computer w/ Intel PRO/Wireless 2195ABG
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.038

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application lX5E+JqgOKsG33Oi9zJgxA==

EAS Grant - Application lX5E+JqgOKsG33Oi9zJgxA==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 09/03/2004 Application Dated: 06/28/2004

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11a/b/g Mini PCI type 3B Card
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15E	5180.0  -  5320.0	0.038

"OEM integration only" and "the device cannot be sold to the General Public". This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in the filing. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. -- The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported SAR values are at 5.2 GHz 0.87 W/kg.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application KH0ZISQZujPPqBX1tbfXgQ==

Mail To:

Michael Heckrotte, Engineering Manager

COMPLIANCE CERTIFICATION SERVICES

561F MONTEREY ROAD

MORGAN HILL, CA 95037

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 02/11/2005 Application Dated: 02/11/2005

Dell Inc.

One Dell Way

Round Rock, TX 78682

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Notebook PC with Intel PRO/Wireless 2195ABG WLAN

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.038

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 02/11/2005 Application Dated: 02/11/2005

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Notebook PC with Intel PRO/Wireless 2195ABG WLAN
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.038

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Jb5lZItVMwELplmJj/pwog==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 02/10/2005 Application Dated: 02/10/2005

Dell Inc.

One Dell Way

Round Rock, TX 78682

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Digital Transmission System
Notes:	Notebook PC with Intel PRO/Wireless 2195ABG WLAN

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.257
CC	15C	5745.0  -  5825.0	0.12589

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 02/10/2005 Application Dated: 02/10/2005

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Digital Transmission System
Notes:	Notebook PC with Intel PRO/Wireless 2195ABG WLAN
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.257
CC	15C	5745.0  -  5825.0	0.12589

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application i8FKWe6zeVasIbEX3gemRw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 01/07/2005 Application Dated: 01/07/2005

Dell Inc.

One Dell Way

Round Rock, TX 78682

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Notebook Computer w/ Intel PRO/Wireless 2195ABG

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.038

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 01/07/2005 Application Dated: 01/07/2005

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Notebook Computer w/ Intel PRO/Wireless 2195ABG
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.038

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application goU75pR69CQgGp8WOPSeVA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 10/21/2005 Application Dated: 10/21/2005

Dell Inc.

One Dell Way

Round Rock, TX 78682

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Digital Transmission System
Notes:	Notebook Computer w/ Intel PRO/Wireless 2195ABG

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.257
CC	15C	5745.0  -  5825.0	0.12589

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 10/21/2005 Application Dated: 10/21/2005

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Digital Transmission System
Notes:	Notebook Computer w/ Intel PRO/Wireless 2195ABG
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.257
CC	15C	5745.0  -  5825.0	0.12589

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application GjW8EW8btmLzs6wxZl9Vvw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 01/07/2005 Application Dated: 01/07/2005

Dell Inc.

One Dell Way

Round Rock, TX 78682

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Digital Transmission System
Notes:	Notebook Computer w/ Intel PRO/Wireless 2195ABG

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.257
CC	15C	5745.0  -  5825.0	0.12589

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 01/07/2005 Application Dated: 01/07/2005

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Digital Transmission System
Notes:	Notebook Computer w/ Intel PRO/Wireless 2195ABG
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.257
CC	15C	5745.0  -  5825.0	0.12589

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application evCAPGeVhpHgQZXAaGzhpQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 05/04/2005 Application Dated: 05/04/2005

Dell Inc.

One Dell Way

Round Rock, TX 78682

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Notebook PC with Intel PRO/Wireless 2195ABG WLAN

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.038

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 05/04/2005 Application Dated: 05/04/2005

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Notebook PC with Intel PRO/Wireless 2195ABG WLAN
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.038

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application bG8yjG1YeQOC18gTztQ96g==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 02/11/2005 Application Dated: 02/11/2005

Dell Inc.

One Dell Way

Round Rock, TX 78682

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Digital Transmission System
Notes:	Notebook PC with Intel PRO/Wireless 2195ABG WLAN

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.257
CC	15C	5745.0  -  5825.0	0.12589

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 02/11/2005 Application Dated: 02/11/2005

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Digital Transmission System
Notes:	Notebook PC with Intel PRO/Wireless 2195ABG WLAN
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.257
CC	15C	5745.0  -  5825.0	0.12589

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.45 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 7ujJIaoGBEH1PaoA2dn2hA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 01/06/2005 Application Dated: 01/06/2005

Dell Inc.

One Dell Way

Round Rock, TX 78682

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11a/b/g Mini PCI type 3A Card

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.038

Class II permissive change filing. "OEM integration only" and "the device cannot be sold to the General Public". This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in the filing. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. -- The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported SAR values are at 5.2 GHz 0.87 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 01/06/2005 Application Dated: 01/06/2005

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11a/b/g Mini PCI type 3A Card
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.038

Class II permissive change filing. "OEM integration only" and "the device cannot be sold to the General Public". This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in the filing. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. -- The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported SAR values are at 5.2 GHz 0.87 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 7eaYQbTGLX+wy7gHypYs1g==

EAS Grant - Application 7eaYQbTGLX+wy7gHypYs1g==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 01/25/2005 Application Dated: 10/21/2004

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Notebook Computer with Intel PRO/Wireless 2915ABG
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5320.0	0.038

This Permissive Change/Modification was originally issued on 12/30/2004.

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.87 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 5jvv+ONrS2b/45FDubIH1Q==

EAS Grant - Application 5jvv+ONrS2b/45FDubIH1Q==

Mail To:

Rick Candelas, Lab Manager

Aegis Labs, Inc.

22431 Antonio Parkway #B160-417

Rancho Santa Margarita, CA 92688

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 09/03/2004 Application Dated: 06/28/2004

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Digital Transmission System
Notes:	802.11a/b/g Mini PCI type 3B Card
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.257
CE	15C	5745.0  -  5825.0	0.12589

"OEM integration only" and "the device cannot be sold to the General Public". This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in the filing. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. -- The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in this filing is applicable to demonstrate compliance for a final host product only as shown in this filing. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported SAR values are at 2.4 GHz 0.41 W/kg, and at 5.8 GHz 0.85 W/kg.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application 3o8ApmuiwMYTpu+q7TEtDQ==

EAS Grant - Application 3o8ApmuiwMYTpu+q7TEtDQ==

Mail To:

Michael Heckrotte, Engineering Manager

COMPLIANCE CERTIFICATION SERVICES

561F MONTEREY ROAD

MORGAN HILL, CA 95037

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Dell Inc. One Dell Way Round Rock, TX 78682 United States

Date of Grant: 01/25/2005 Application Dated: 10/21/2004

Attention: Don Bobo , Distinguished Member of Technical Staff

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E2K5HCKT
Name of Grantee:	Dell Inc.
Equipment Class:	Digital Transmission System
Notes:	Notebook Computer with Intel PRO/Wireless 2915ABG
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	5745.0  -  5825.0	0.12589
CC	15C	2412.0  -  2462.0	0.257

This Permissive Change/Modification was originally issued on 12/30/2004.

Device is for OEM integration only and must not be sold to the General Public. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final host products only as shown in the filings under this FCC ID. Installation of this device into other host products requires the submission of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The highest reported body SAR values for the composite-device filings under this FCC ID are: 2.4 GHz-band 1.31 W/kg; 5.2 GHz-band 0.87 W/kg; 5.8 GHz-band 1.32 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To:

Rick Candelas,

Aegis Labs, Inc.

22431 Antonio Parkway #B160-417

Rancho Santa Margarita, CA 92688