FCC ID E2KBE200D2
WLAN and BT, 2x2 PCIe M.2 2230 adapter card
by Dell Inc.
Grantee Code: E2K Product Code: BE200D2
Latest application date: 2024-04-01
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-04-01 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2024-04-01 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-04-01 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-04-01 |
| 5955-6415 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200D2 Grant Date: 09/14/2023 | 2023-11-29 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200D2 Grant Date: 08/23/2023 | 2023-11-29 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200D2 Grant Date: 08/23/2023 | 2023-11-29 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200D2 Grant Date: 08/23/2023 | 2023-11-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual-1 | Users Manual | 2024-04-04 | PDF 101.6 KB |
| User Manual-2 | Users Manual | 2024-04-04 | PDF 4.4 MB |
| Internal Photos-1 | Internal Photos | 2024-04-04 | PDF 2.3 MB |
| Internal Photos-2 | Internal Photos | 2024-04-04 | PDF 5.7 MB |
| Internal Photos-3 | Internal Photos | 2024-04-04 | PDF 5.2 MB |
| ID Label and Location | Internal Photos | 2024-04-01 | PDF 112.3 KB |
| External Photos-1 | External Photos | 2024-04-04 | PDF 4.5 MB |
| External Photos-2 | External Photos | 2024-04-04 | PDF 4.1 MB |
| External Photos | External Photos | 2024-03-12 | PDF 104.8 KB |
| ID Label and Location | ID Label/Location Info | 2024-04-01 | PDF 112.3 KB |
| ID Label and Location | ID Label/Location Info | 2023-11-29 | PDF 60.9 KB |
| Test Set Up Photos_SAR | Test Setup Photos | 2024-04-04 | PDF 1.2 MB |
| Test Report_Antenna-1 | Test Report | 2024-04-01 | PDF 1.2 MB |
| Test Report_Antenna-2 | Test Report | 2024-04-01 | PDF 1.1 MB |
| Test Report_Antenna-3 | Test Report | 2024-04-01 | PDF 1.2 MB |
| Test Report_Antenna-4 | Test Report | 2024-04-01 | PDF 1.3 MB |
| US Agent and Cover Equipment letter | Attestation Statements | 2024-04-01 | PDF 181.2 KB |
| C2PC_Description of Change Letter | Cover Letter(s) | 2024-04-01 | PDF 66.9 KB |
| LTC Request Letter | Cover Letter(s) | 2024-04-01 | PDF 168.3 KB |
| POA | Cover Letter(s) | 2024-04-01 | PDF 174.5 KB |
| POA_Contact | Cover Letter(s) | 2024-04-01 | PDF 237.9 KB |
| STC Request Letter Metadata only | Cover Letter(s) | 2024-04-01 | PDF 172.3 KB |
| STC Request Letter_R1 | Cover Letter(s) | 2024-04-01 | PDF 171.8 KB |
| Change in FCC ID Request Letter | Cover Letter(s) | 2023-11-29 | PDF 160.8 KB |
| POA_from original approval holder | Cover Letter(s) | 2023-11-29 | PDF 117.9 KB |
| STC Request Letter | Cover Letter(s) | 2023-11-29 | PDF 167.7 KB |
| SAR Report-1 | RF Exposure Info | 2024-04-01 | PDF 1.7 MB |
| SAR Report-2 | RF Exposure Info | 2024-04-01 | PDF 3.2 MB |
| SAR Report-3 | RF Exposure Info | 2024-04-01 | PDF 4.8 MB |
| SAR Report-4 | RF Exposure Info | 2024-04-01 | PDF 1.7 MB |
| Operational Description Metadata only | Operational Description | PDF 683.2 KB | |
| Software Security Information Metadata only | SDR Software/Security Inf | PDF 964.6 KB |
Application Information
| Application ID | vHoLupG5VvHG/P7K/IAqgw== |
|---|---|
| Final Action Date | 2024-04-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008359580 |
| Model | BE200D2 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | WLAN and BT, 2x2 PCIe M.2 2230 adapter card |
| Responsible Party | Don A Bobo, Distinguished Member of Technical Staff, don_bobo@dell.com  , 512-728-5508 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com  , +886-3-260-0884 |
| TCB Email | vina.kerai@nemko.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 04/04/2024 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 38mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Tablet Computer, model: T07H, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.29 W/kg and 1.13 W/kg, respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| vHoLupG5VvHG/P7K/IAqgw== | 2024-04-01 | Class II permissive change or modification of presently authorized equipment |
| uG85AK1tXtm4B59ZJrTnWg== | 2024-04-01 | Class II permissive change or modification of presently authorized equipment |
| lmOe89LU8VahTQw/vM/xJg== | 2024-04-01 | Class II permissive change or modification of presently authorized equipment |
| gnX82RQ3LCT+w2fMweS3uQ== | 2024-04-01 | Class II permissive change or modification of presently authorized equipment |
| yKJinBF2RJduiRzkpYvKTw== | 2023-11-29 | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200D2 Grant Date: 09/14/2023 |
| yAXA0zrU8lOKKxLa5p7cMA== | 2023-11-29 | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200D2 Grant Date: 08/23/2023 |
| iR31peTbqVpA1VSUOBkMeg== | 2023-11-29 | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200D2 Grant Date: 08/23/2023 |
| Vo/z73snl555LPuzXou5tQ== | 2023-11-29 | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200D2 Grant Date: 08/23/2023 |
| R3L6Jl18tHHNmS2udgyvkA== | 2023-11-29 | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200D2 Grant Date: 08/14/2023 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.034 | 15C | CC |
| 2402-2480 MHz | 0.0340000 | 15C | CC |
| 2412-2472 MHz | 0.998 | 15C | CC, MO |
| 2422-2462 MHz | 0.995 | 15C | CC, MO |
| 5210 MHz | 0.164 | 15E | CC, MO |
| 5250 MHz | 0.116 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.15 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.248 | 15E | CC, MO, ND |
| 5290 MHz | 0.15 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.143 | 15E | CC, MO, ND |
| 5510-5670 MHz | 0.242 | 15E | CC, MO, ND |
| 5530-5610 MHz | 0.239 | 15E | CC, MO, ND |
| 5570 MHz | 0.203 | 15E | CC, MO, ND |
| 5690 MHz | 0.244 | 15E | CC, MO, ND |
| 5710 MHz | 0.248 | 15E | CC, MO, ND |
| 5720 MHz | 0.132 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.451 | 15E | CC, MO |
| 5755-5795 MHz | 0.437 | 15E | CC, MO |
| 5775 MHz | 0.286 | 15E | CC, MO |
| 5815 MHz | 0.378 | 15E | CC, EP, MO |
| 5835-5875 MHz | 0.713 | 15E | CC, EP, MO |
| 5845-5885 MHz | 0.327 | 15E | CC, EP, MO |
| 5855 MHz | 0.84 | 15E | CC, EP, MO |
| 5955-6415 MHz | 0.57 | 15E | CC, EP, MO |
| 5965-7085 MHz | 0.024 | 15E | CC, EP, MO |
| 5965-6405 MHz | 0.934 | 15E | CC, EP, MO |
| 5985-7025 MHz | 0.05 | 15E | CC, EP, MO |
| 5985-6385 MHz | 0.912 | 15E | CC, EP, MO |
| 6025-6985 MHz | 0.094 | 15E | CC, EP, MO |
| 6025-6345 MHz | 0.634 | 15E | CC, EP, MO |
| 6105-6265 MHz | 0.234 | 15E | CC, EP, MO |
| 6105-6905 MHz | 0.161 | 15E | CC, EP, MO |
| 6535-6855 MHz | 0.565 | 15E | CC, EP, MO |
| 6565-6845 MHz | 0.868 | 15E | CC, EP, MO |
| 6625-6785 MHz | 0.862 | 15E | CC, EP, MO |
| 6665 MHz | 0.573 | 15E | CC, EP, MO |
Grants
TCB Grant - Application yKJinBF2RJduiRzkpYvKTw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/29/2023 Application Dated: 11/15/2023 |
| Dell Inc. |
| One Dell Way |
| Round Rock, TX 78682 |
| Attention: Don Bobo , Distinguished Member of Technical Staff |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KBE200D2 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | WLAN and BT, 2x2 PCIe M.2 2230 adapter card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.024 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.05 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.094 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.161 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5965.0 - 6405.0 | 0.934 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.912 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.634 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.234 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.565 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.868 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.862 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.573 |
| Power Output listed is EIRP. The first five rows reported above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.63 W/kg and 1.59 W/kg respectively. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 45mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application yKJinBF2RJduiRzkpYvKTw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Dell Inc. One Dell Way Round Rock, TX 78682 United States |
Date of Grant: 11/29/2023 Application Dated: 11/15/2023 |
| Attention: Don Bobo , Distinguished Member of Technical Staff |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KBE200D2 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | WLAN and BT, 2x2 PCIe M.2 2230 adapter card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.024 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.05 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.094 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.161 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5965.0 - 6405.0 | 0.934 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.912 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.634 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.234 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.565 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.868 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.862 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.573 |
| Power Output listed is EIRP. The first five rows reported above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.63 W/kg and 1.59 W/kg respectively. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 45mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/29/2023 Application Dated: 11/14/2023 |
| Dell Inc. |
| One Dell Way |
| Round Rock, TX 78682 |
| Attention: Don Bobo , Distinguished Member of Technical Staff |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KBE200D2 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN and BT, 2x2 PCIe M.2 2230 adapter card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.034 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.995 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 38mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application yAXA0zrU8lOKKxLa5p7cMA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Dell Inc. One Dell Way Round Rock, TX 78682 United States |
Date of Grant: 11/29/2023 Application Dated: 11/14/2023 |
| Attention: Don Bobo , Distinguished Member of Technical Staff |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KBE200D2 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN and BT, 2x2 PCIe M.2 2230 adapter card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.034 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.995 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 38mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/29/2023 Application Dated: 11/14/2023 |
| Dell Inc. |
| One Dell Way |
| Round Rock, TX 78682 |
| Attention: Don Bobo , Distinguished Member of Technical Staff |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KBE200D2 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN and BT, 2x2 PCIe M.2 2230 adapter card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.034 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 38mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Vo/z73snl555LPuzXou5tQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Dell Inc. One Dell Way Round Rock, TX 78682 United States |
Date of Grant: 11/29/2023 Application Dated: 11/14/2023 |
| Attention: Don Bobo , Distinguished Member of Technical Staff |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KBE200D2 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN and BT, 2x2 PCIe M.2 2230 adapter card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.034 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 38mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 04/01/2024 Application Dated: 01/10/2024 |
| Dell Inc. |
| One Dell Way |
| Round Rock, TX 78682 |
| Attention: Don Bobo , Distinguished Member of Technical Staff |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KBE200D2 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN and BT, 2x2 PCIe M.2 2230 adapter card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.034 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 38mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Tablet Computer, model: T07H, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.29 W/kg and 1.13 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application vHoLupG5VvHG/P7K/IAqgw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Dell Inc. One Dell Way Round Rock, TX 78682 United States |
Date of Grant: 04/01/2024 Application Dated: 01/10/2024 |
| Attention: Don Bobo , Distinguished Member of Technical Staff |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KBE200D2 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN and BT, 2x2 PCIe M.2 2230 adapter card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.034 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 38mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Tablet Computer, model: T07H, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.29 W/kg and 1.13 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 04/01/2024 Application Dated: 01/10/2024 |
| Dell Inc. |
| One Dell Way |
| Round Rock, TX 78682 |
| Attention: Don Bobo , Distinguished Member of Technical Staff |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KBE200D2 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN and BT, 2x2 PCIe M.2 2230 adapter card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.034 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.995 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 38mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Tablet Computer, model: T07H, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.96 W/kg and 1.02 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application uG85AK1tXtm4B59ZJrTnWg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Dell Inc. One Dell Way Round Rock, TX 78682 United States |
Date of Grant: 04/01/2024 Application Dated: 01/10/2024 |
| Attention: Don Bobo , Distinguished Member of Technical Staff |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KBE200D2 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN and BT, 2x2 PCIe M.2 2230 adapter card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.034 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.995 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 38mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Tablet Computer, model: T07H, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.96 W/kg and 1.02 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/29/2023 Application Dated: 11/14/2023 |
| Dell Inc. |
| One Dell Way |
| Round Rock, TX 78682 |
| Attention: Don Bobo , Distinguished Member of Technical Staff |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KBE200D2 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | WLAN and BT, 2x2 PCIe M.2 2230 adapter card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
EAS Grant - Application R3L6Jl18tHHNmS2udgyvkA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Dell Inc. One Dell Way Round Rock, TX 78682 United States |
Date of Grant: 11/29/2023 Application Dated: 11/14/2023 |
| Attention: Don Bobo , Distinguished Member of Technical Staff |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KBE200D2 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | WLAN and BT, 2x2 PCIe M.2 2230 adapter card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 04/01/2024 Application Dated: 01/10/2024 |
| Dell Inc. |
| One Dell Way |
| Round Rock, TX 78682 |
| Attention: Don Bobo , Distinguished Member of Technical Staff |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KBE200D2 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN and BT, 2x2 PCIe M.2 2230 adapter card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.147 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.245 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.164 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.116 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.15 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.248 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.15 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.143 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.242 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.248 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.132 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.244 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.239 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.203 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.451 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.437 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.286 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC EP MO | 15E | 5835.0 - 5875.0 | 0.713 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.84 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.378 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 38mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Tablet Computer, model: T07H, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.84 W/kg and 1.13 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application lmOe89LU8VahTQw/vM/xJg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Dell Inc. One Dell Way Round Rock, TX 78682 United States |
Date of Grant: 04/01/2024 Application Dated: 01/10/2024 |
| Attention: Don Bobo , Distinguished Member of Technical Staff |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KBE200D2 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN and BT, 2x2 PCIe M.2 2230 adapter card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.147 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.245 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.164 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.116 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.15 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.248 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.15 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.143 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.242 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.248 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.132 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.244 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.239 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.203 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.451 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.437 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.286 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC EP MO | 15E | 5835.0 - 5875.0 | 0.713 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.84 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.378 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 38mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Tablet Computer, model: T07H, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.84 W/kg and 1.13 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/29/2023 Application Dated: 11/15/2023 |
| Dell Inc. |
| One Dell Way |
| Round Rock, TX 78682 |
| Attention: Don Bobo , Distinguished Member of Technical Staff |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KBE200D2 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN and BT, 2x2 PCIe M.2 2230 adapter card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.147 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.245 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.164 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.116 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.15 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.248 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.15 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.143 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.242 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.248 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.132 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.244 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.239 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.203 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.451 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.437 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.286 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC EP MO | 15E | 5835.0 - 5875.0 | 0.713 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.84 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.378 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 38mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application iR31peTbqVpA1VSUOBkMeg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Dell Inc. One Dell Way Round Rock, TX 78682 United States |
Date of Grant: 11/29/2023 Application Dated: 11/15/2023 |
| Attention: Don Bobo , Distinguished Member of Technical Staff |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KBE200D2 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN and BT, 2x2 PCIe M.2 2230 adapter card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.147 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.245 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.164 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.116 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.15 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.248 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.15 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.143 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.242 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.248 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.132 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.244 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.239 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.203 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.451 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.437 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.286 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC EP MO | 15E | 5835.0 - 5875.0 | 0.713 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.84 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.378 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 38mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 04/01/2024 Application Dated: 01/10/2024 |
| Dell Inc. |
| One Dell Way |
| Round Rock, TX 78682 |
| Attention: Don Bobo , Distinguished Member of Technical Staff |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KBE200D2 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | WLAN and BT, 2x2 PCIe M.2 2230 adapter card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.024 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.05 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.094 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.161 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5965.0 - 6405.0 | 0.934 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.912 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.634 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.234 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.565 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.868 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.862 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.573 |
| Power Output listed is EIRP. The first five rows reported above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.63 W/kg and 1.59 W/kg respectively. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 45mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Tablet Computer, model: T07H, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.78 W/kg and 1.07 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application gnX82RQ3LCT+w2fMweS3uQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Dell Inc. One Dell Way Round Rock, TX 78682 United States |
Date of Grant: 04/01/2024 Application Dated: 01/10/2024 |
| Attention: Don Bobo , Distinguished Member of Technical Staff |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KBE200D2 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | WLAN and BT, 2x2 PCIe M.2 2230 adapter card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.024 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.05 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.094 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.161 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5965.0 - 6405.0 | 0.934 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.912 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.634 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.234 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.565 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.868 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.862 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.573 |
| Power Output listed is EIRP. The first five rows reported above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.63 W/kg and 1.59 W/kg respectively. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 45mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Tablet Computer, model: T07H, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.78 W/kg and 1.07 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |