FCC ID E2KDWBT1
802.11b/g Wireless Lan Card
by Dell Inc.
Grantee Code: E2K Product Code: DWBT1
Latest application date: 2008-11-03
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2008-11-03 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2008-10-19 |
| 2412-2462 MHz | Original Equipment | 2008-08-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual for host 1 of 2 | Users Manual | 2009-01-31 | PDF 21.8 KB |
| User manual for host 2 of 2 | Users Manual | 2009-01-31 | PDF 737.9 KB |
| User manual | Users Manual | 2008-12-31 | PDF 687.9 KB |
| User manual | Users Manual | 2008-11-28 | PDF 207.2 KB |
| User manual statement 1 | Users Manual | 2008-11-28 | PDF 27.5 KB |
| User manual statement 2 | Users Manual | 2008-11-28 | PDF 25.3 KB |
| User manual statement 3 | Users Manual | 2008-11-28 | PDF 32.1 KB |
| External photos | External Photos | 2008-11-28 | PDF 174.1 KB |
| Internal photos | Internal Photos | 2008-11-28 | PDF 466 KB |
| External photos for host | External Photos | 2009-01-31 | PDF 698.4 KB |
| Host external photos | External Photos | 2008-12-31 | PDF 120.5 KB |
| Label format and location | ID Label/Location Info | 2008-11-03 | PDF 1.5 MB |
| Label format | ID Label/Location Info | 2008-10-19 | PDF 438.3 KB |
| Label location | ID Label/Location Info | 2008-10-19 | PDF 891.4 KB |
| Label format and location | ID Label/Location Info | 2008-08-04 | PDF 353.7 KB |
| Test setup photos | Test Setup Photos | 2009-01-31 | PDF 210.5 KB |
| SAR test setup photos | Test Setup Photos | 2008-12-31 | PDF 119.4 KB |
| Test setup photos | Test Setup Photos | 2008-12-31 | PDF 368.2 KB |
| Test setup photos | Test Setup Photos | 2008-11-28 | PDF 451.8 KB |
| Test report | Test Report | 2008-11-03 | PDF 915.6 KB |
| SAR test report | RF Exposure Info | 2008-10-19 | PDF 425.9 KB |
| Test report | Test Report | 2008-10-19 | PDF 570.5 KB |
| Test report | Test Report | 2008-08-04 | PDF 1.1 MB |
| Agent authorization letter | Cover Letter(s) | 2008-11-03 | PDF 61.5 KB |
| Authorization letter | Cover Letter(s) | 2008-11-03 | PDF 254.3 KB |
| Class II permissive change letter | Cover Letter(s) | 2008-11-03 | PDF 55 KB |
| Confidentiality request letter | Cover Letter(s) | 2008-11-03 | PDF 54.3 KB |
| Agent authorization letter | Cover Letter(s) | 2008-10-19 | PDF 43.5 KB |
| Authorization letter | Cover Letter(s) | 2008-10-19 | PDF 255.7 KB |
| Class II permissive change letter | Cover Letter(s) | 2008-10-19 | PDF 55.8 KB |
| Confidentiality request letter | Cover Letter(s) | 2008-10-19 | PDF 68.5 KB |
| Agent authorization letter | Cover Letter(s) | 2008-08-04 | PDF 25.6 KB |
| Authorization letter | Cover Letter(s) | 2008-08-04 | PDF 254.3 KB |
| Confidentiality request letter | Cover Letter(s) | 2008-08-04 | PDF 114.7 KB |
| Modular approval request letter | Cover Letter(s) | 2008-08-04 | PDF 26.3 KB |
| TCB Q and A | Cover Letter(s) | 2008-08-04 | PDF 126.4 KB |
| D2450v2 sn728 20080411c | RF Exposure Info | 2008-10-19 | PDF 1.6 MB |
| SAR EX3DV4 SN3552 | RF Exposure Info | 2008-10-19 | PDF 1.3 MB |
| SAR test plot | RF Exposure Info | 2008-10-19 | PDF 1 MB |
| Antenna specification | Parts List/Tune Up Info | 2008-08-04 | PDF 530.6 KB |
Application Information
| Application ID | oTMMFbNfhcD8I0HXKHOoDg== |
|---|---|
| Final Action Date | 2008-11-03 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0016660250 |
| Model | DWBT1 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11b/g Wireless Lan Card |
| Responsible Party | Richard Worley, Regulatory Engineer, Richard_Worley@dell.com  , 512-728-1081 |
| Test Firm | Kurt Chen, Compliance Certification Services Inc., kurt.chen@ccsrf.com  , 886-3-3240332 |
| TCB Email | mike.kuo@ccsemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 01/31/2009 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| oTMMFbNfhcD8I0HXKHOoDg== | 2008-11-03 | Class II permissive change or modification of presently authorized equipment |
| 4ptgeOoHiL+cu8168lUPGw== | 2008-10-19 | Class II permissive change or modification of presently authorized equipment |
| 9/CVS+r07JYDprhfEs5m1A== | 2008-08-04 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.0510000 | 15C |
Grants
TCB Grant - Application oTMMFbNfhcD8I0HXKHOoDg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/03/2008 Application Dated: 11/03/2008 |
| Dell Inc. |
| One Dell Way |
| Round Rock, TX 78682 |
| Attention: Richard Worley , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KDWBT1 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Wireless Lan Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.051 |
| Class II permissive by implementing two-way authentication to allow end user installation in a specific laptop PC as documented in this filing. Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. |
| Single Modular |
EAS Grant - Application oTMMFbNfhcD8I0HXKHOoDg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Dell Inc. One Dell Way Round Rock, TX 78682 United States |
Date of Grant: 11/03/2008 Application Dated: 11/03/2008 |
| Attention: Richard Worley , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KDWBT1 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Wireless Lan Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.051 |
| Class II permissive by implementing two-way authentication to allow end user installation in a specific laptop PC as documented in this filing. Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. |
| Single Modular |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/04/2008 Application Dated: 08/04/2008 |
| Dell Inc. |
| One Dell Way |
| Round Rock, TX 78682 |
| Attention: Richard Worley , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KDWBT1 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Wireless Lan Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.051 |
| Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Single Modular |
EAS Grant - Application 9/CVS+r07JYDprhfEs5m1A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Dell Inc. One Dell Way Round Rock, TX 78682 United States |
Date of Grant: 08/04/2008 Application Dated: 08/04/2008 |
| Attention: Richard Worley , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KDWBT1 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Wireless Lan Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.051 |
| Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Single Modular |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/19/2008 Application Dated: 10/19/2008 |
| Dell Inc. |
| One Dell Way |
| Round Rock, TX 78682 |
| Attention: Richard Worley , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KDWBT1 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Wireless Lan Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.051 |
| Class II permissive by implementing two-way authentication to allow end user installation and adding a portable configuration in a specific laptop PC as documented in this filing. Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR values as documented in this filing is 0.121 W/kg. |
| Single Modular |
EAS Grant - Application 4ptgeOoHiL+cu8168lUPGw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Dell Inc. One Dell Way Round Rock, TX 78682 United States |
Date of Grant: 10/19/2008 Application Dated: 10/19/2008 |
| Attention: Richard Worley , Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E2KDWBT1 |
| Name of Grantee: | Dell Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Wireless Lan Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.051 |
| Class II permissive by implementing two-way authentication to allow end user installation and adding a portable configuration in a specific laptop PC as documented in this filing. Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR values as documented in this filing is 0.121 W/kg. |
| Single Modular |
| Mail To: |