FCC ID E2KEXMG1A

Class II Permissive Change: Enables portable use when integrated into the DELL Portable Computer P200G. The highest reported SAR for the body and simultaneous transmission use conditions are 1.15 W/kg and 1.48 W/kg, respectively.

Class II Permissive Change: Enables portable use when integrated into the DELL Portable Computer P195G. The highest reported SAR for the body and simultaneous transmission use conditions are 0.44 W/kg and 1.20 W/kg, respectively.

Class II Permissive Change: Limited Single Modular Approval, address RF Exposure along with the WLAN module (FCC ID: PD9AX211NG or PD9BE200NG) co-location in the host of DELL Portable Computer, model: P148G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10W/kg and 1.29W/kg, respectively.

Class II Permissive Change: Limited Single Modular Approval, address RF Exposure along with the WLAN module (FCC ID: PD9AX211NG or PD9BE200NG) co-location in the host of DELL Portable Computer, model: P148G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10W/kg and 1.29W/kg, respectively.

Class II Permissive Change: Limited Single Modular Approval, address RF Exposure along with the WLAN module (FCC ID: PD9AX211NG or PD9BE200NG) co-location in the host of DELL Portable Computer, model: P148G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10W/kg and 1.29W/kg, respectively.

Class II Permissive Change: Limited Single Modular Approval, address RF Exposure along with the WLAN module (FCC ID: PD9AX211NG or PD9BE200NG) co-location in the host of DELL Portable Computer, model: P148G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10W/kg and 1.29W/kg, respectively.

Power listed is maximum conducted output power. This device supports LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 48. This device supports intra-band uplink carrier aggregation. Single modular approval for mobile RF exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module grantee is responsible for providing the documentation to the host integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Power listed is maximum conducted output power. This device supports LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 48. This device supports intra-band uplink carrier aggregation. Single modular approval for mobile RF exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module grantee is responsible for providing the documentation to the host integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Class II Permissive Change: Enables portable use when integrated into the DELL Portable Computer P126F. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change: Enables portable use when integrated into the DELL Portable Computer P126F. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change: Enables portable use when integrated into the DELL Portable Computer P195G.

Class II Permissive Change: The intention of this application is to demonstrate the compliance for the co-location of multiple simultaneously transmitting modules within this host device as described in this application. The highest reported SAR for the body and simultaneous transmission use conditions are 1.20 W/kg and 1.50 W/kg, respectively.

Class II Permissive Change: Enables portable use when integrated into the DELL Portable Computer P174G. The highest reported SAR for the body, and simultaneous transmission use conditions are < 0.10 W/kg and 1.45 W/kg, respectively.

Class II Permissive Change: Enables portable use when integrated into the DELL Portable Computer P174G. The highest reported SAR for the body, and simultaneous transmission use conditions are < 0.10 W/kg and 1.45 W/kg, respectively.