FCC ID E5A-ADRFID
RFID Enabled Thermal Printer
by Printronix Inc
Grantee Code: E5A Product Code: ADRFID
Latest application date: 2004-06-25
FCC ID Device Details
| FCC ID | E5A-ADRFID |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | E5A |
| Product Code | ADRFID |
| Applicant Business | Printronix Inc 🇺🇸 |
| Related Domains |  printronix.com  ckc.com |
| Equipment Class | RFID Enabled Thermal Printer |
| Test Firm | CKC Laboratories, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902-928 MHz | Class II permissive change or modification of presently authorized equipment | 2004-06-25 |
| 902-928 MHz | Original Equipment | 2003-11-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2003-11-14 | PDF 3.8 MB |
| Internal Photos | Internal Photos | 2004-06-25 | PDF 1,008.5 KB |
| Internal Photos | Internal Photos | 2003-11-14 | PDF 2.6 MB |
| External Photos | External Photos | 2003-11-14 | PDF 270 KB |
| Label | ID Label/Location Info | 2003-11-14 | PDF 121.5 KB |
| Label Location | ID Label/Location Info | 2003-11-14 | PDF 84.5 KB |
| Test Setup Photos | Test Setup Photos | 2004-06-25 | PDF 290 KB |
| Test Setup Photos | Test Setup Photos | 2003-11-14 | PDF 176.8 KB |
| Test Report | Test Report | 2004-06-25 | PDF 1.1 MB |
| Test Report | Test Report | 2003-11-14 | PDF 1.1 MB |
| Confidentiality Letter | Cover Letter(s) | 2004-06-25 | PDF 24.2 KB |
| Letter of Changes | Cover Letter(s) | 2004-06-25 | PDF 33.5 KB |
| TCB Responses | Cover Letter(s) | 2004-06-25 | PDF 32.1 KB |
| FCC Confidentiality Letter | Cover Letter(s) | 2003-11-14 | PDF 28.8 KB |
| MPE Calculations | RF Exposure Info | 2004-06-25 | PDF 73.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 14.7 KB | |
| Schematics Metadata only | Schematics | PDF 80.1 KB | |
| Operational Description Metadata only | Operational Description | PDF 8.6 KB | |
| Operational Description Metadata only | Operational Description | PDF 8.5 KB |
Application Information
| Application ID | fKRTWiI7iH3/luHTHWAEug== |
|---|---|
| Final Action Date | 2004-06-25 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0009654054 |
| Model | ADRFID |
| Frequency Range | 902-928 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RFID Enabled Thermal Printer |
| Responsible Party | Andrew Edwards, Director, Product Development, aedwards@printronix.com , 714-368-2548 |
| Agent | Mary Ellen Mary Ellen Mary Ellen, CKC Laboratories, Inc., reports@ckc.com , 209-966-5240 |
| Technical Contact | Mary Ellen Clayton, CKC Laboratories, Inc., reports@ckc.com , 209-966-5240 |
| Non-Technical Contact | Mary Ellen Clayton, CKC Laboratories, Inc., reports@ckc.com , 209-966-5240 |
| Test Firm | Steve Behm, CKC Laboratories, Inc., steve.behm@ckc.com , 2099665240 |
| TCB Email | info@ckccertification.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output is conducted. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| fKRTWiI7iH3/luHTHWAEug== | 2004-06-25 | Class II permissive change or modification of presently authorized equipment |
| Qp3cGD+CDEbhlEFebvS8xw== | 2003-11-14 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Qp3cGD+CDEbhlEFebvS8xw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 11/14/2003 Application Dated: 11/14/2003 |
| Printronix Inc |
| 15345 Barranca Parkway |
| Irvine, CA 92618 |
| Attention: Andrew Edwards , Director, Product Development |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E5A-ADRFID |
| Name of Grantee: | Printronix Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Enabled Thermal Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 902.0 - 928.0 | 0.836 |
| Power output is conducted. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application Qp3cGD+CDEbhlEFebvS8xw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Printronix Inc 15345 Barranca Parkway Irvine, CA 92618 United States |
Date of Grant: 11/14/2003 Application Dated: 11/14/2003 |
| Attention: Andrew Edwards , Director, Product Development |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E5A-ADRFID |
| Name of Grantee: | Printronix Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Enabled Thermal Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 902.0 - 928.0 | 0.836 |
| Power output is conducted. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 06/25/2004 Application Dated: 06/25/2004 |
| Printronix Inc |
| 15345 Barranca Parkway |
| Irvine, CA 92618 |
| Attention: Andrew Edwards , Director, Product Development |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E5A-ADRFID |
| Name of Grantee: | Printronix Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Enabled Thermal Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 902.0 - 928.0 | 0.85 |
| Power output is conducted. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application fKRTWiI7iH3/luHTHWAEug==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Printronix Inc 15345 Barranca Parkway Irvine, CA 92618 United States |
Date of Grant: 06/25/2004 Application Dated: 06/25/2004 |
| Attention: Andrew Edwards , Director, Product Development |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E5A-ADRFID |
| Name of Grantee: | Printronix Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Enabled Thermal Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 902.0 - 928.0 | 0.85 |
| Power output is conducted. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |