FCC ID E5MDS-9810

Spread Spectrum Data Tranceiver

by GE MDS LLC

Grantee Code: E5M   Product Code: DS9810
Latest application date: 2007-10-16

FCC ID Device Details

FCC IDE5MDS-9810
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeE5M
Product CodeDS9810
Applicant BusinessGE MDS LLC 🇺🇸
Related Domains ge.com
Equipment ClassSpread Spectrum Data Tranceiver
Test FirmNational Technical Systems - Silicon Valley

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.2-927.8 MHzClass II permissive change or modification of presently authorized equipment2007-10-16
902.2-927.8 MHzOriginal Equipment2004-07-29

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2007-10-16PDF 1.6 MB
Manual Metadata onlyUsers Manual2004-07-29PDF 3.2 MB
Manual revision 2Users Manual2004-07-29PDF 1.6 MB
Manual rf statementUsers Manual2004-07-29PDF 98.5 KB
Internal PhotosInternal Photos2007-10-16PDF 362.2 KB
Internal photosInternal Photos2004-07-29PDF 982.8 KB
External PhotosExternal Photos2007-10-16PDF 161 KB
External photosExternal Photos2004-07-29PDF 241.5 KB
Label and LocationID Label/Location Info2007-10-16PDF 219.7 KB
FCC ID label infoID Label/Location Info2004-07-29PDF 285.2 KB
Test Setup PhotosTest Setup Photos2007-10-16PDF 145.4 KB
Test setup photosTest Setup Photos2004-07-29PDF 331.8 KB
Test ReportTest Report2007-10-16PDF 224.2 KB
Set up photosTest Report2004-07-29PDF 331.8 KB
Test report Metadata onlyTest Report2004-07-29PDF 349.7 KB
Test report revisedTest Report2004-07-29PDF 308.5 KB
Antenna Change LetterCover Letter(s)2007-10-16PDF 131.4 KB
Authorization LetterCover Letter(s)2007-10-16PDF 46.1 KB
Confidentiality LetterCover Letter(s)2007-10-16PDF 42 KB
Premissive Change LetterCover Letter(s)2007-10-16PDF 86.5 KB
Response LetterCover Letter(s)2007-10-16PDF 122 KB
ATCB commentsCover Letter(s)2004-07-29PDF 19.4 KB
POACover Letter(s)2004-07-29PDF 33.2 KB
Request for confidentialityCover Letter(s)2004-07-29PDF 33.6 KB
Response to ATCBCover Letter(s)2004-07-29PDF 28.9 KB
ammendment changeCover Letter(s)2004-07-29PDF 22.4 KB
RF Exposure MPERF Exposure Info2007-10-16PDF 39.6 KB
Antenna info 1RF Exposure Info2004-07-29PDF 344.3 KB
Antenna info 2RF Exposure Info2004-07-29PDF 436.3 KB
MPE Metadata onlyRF Exposure Info2004-07-29PDF 52.8 KB
MPE revised Metadata onlyRF Exposure Info2004-07-29PDF 52.8 KB
MPE revision 3RF Exposure Info2004-07-29PDF 56.3 KB
Block diagram Metadata onlyBlock DiagramPDF 86 KB
Schematics Metadata onlySchematicsPDF 717.3 KB
Hopping sequence Metadata onlyOperational DescriptionPDF 46.4 KB
Operational description Metadata onlyOperational DescriptionPDF 139.2 KB

Application Information

Application ID1kioGqt7PcRFYw6P6bVtrQ==
Final Action Date2007-10-16
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0016050429
ModelDS-9810
Frequency Range902.2-927.8 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionSpread Spectrum Data Tranceiver
Responsible PartyDennis W McCarthy, Agency Compliance Engineer, Dennis.Mccarthy2@ge.com , 585-242-8440
Technical ContactMark Hill, Elliott Labs, doc@elliottlabs.com , 408-254-7800
Test FirmDavid Bare, National Technical Systems - Silicon Valley, david.bare@nts.com , 510-578-3500
TCB EmailHotline@atcb.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. The antenna(s) used with this transmitter must be professionally installed. The antenna(s) used with this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing, or antenna(s) of the same type and lesser gain, may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
1kioGqt7PcRFYw6P6bVtrQ==2007-10-16Class II permissive change or modification of presently authorized equipment
fStt2iZdYydp4gsKCMfugQ==2004-07-29Original Equipment

Equipment Authorization

FrequencyOutputRules
902.2-927.8 MHz0.955000015C

Grants

TCB Grant - Application fStt2iZdYydp4gsKCMfugQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/29/2004

Application Dated: 07/29/2004
GE MDS, LLC
175 Science Parkway
Rochester, NY 14620-4261
 
Attention: Justin Smith , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E5MDS-9810
Name of Grantee:  GE MDS, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Spread Spectrum Data Tranceiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.2  -  927.8 0.955  

Power Output listed is Conducted. The antenna(s) used with this transmitter must be professionally installed. The antenna(s) used with this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing, or antenna(s) of the same type and lesser gain, may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application fStt2iZdYydp4gsKCMfugQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

GE MDS, LLC
175 Science Parkway
Rochester, NY 14620-4261
United States
  Date of Grant: 07/29/2004

Application Dated: 07/29/2004
 
Attention: Justin Smith , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E5MDS-9810
Name of Grantee:  GE MDS, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Spread Spectrum Data Tranceiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.2  -  927.8 0.955  

Power Output listed is Conducted. The antenna(s) used with this transmitter must be professionally installed. The antenna(s) used with this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing, or antenna(s) of the same type and lesser gain, may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application 1kioGqt7PcRFYw6P6bVtrQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 10/16/2007

Application Dated: 10/12/2007
GE MDS LLC
175 Science Parkway
Rochester, NY 14620-4261
 
Attention: Dennis McCarthy , Agency Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E5MDS-9810
Name of Grantee:  GE MDS LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Spread Spectrum Data Tranceiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.2  -  927.8 0.955  

Power Output listed is Conducted. The antenna(s) used with this transmitter must be professionally installed. The antenna(s) used with this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing, or antenna(s) of the same type and lesser gain, may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 1kioGqt7PcRFYw6P6bVtrQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

GE MDS LLC
175 Science Parkway
Rochester, NY 14620-4261
United States
  Date of Grant: 10/16/2007

Application Dated: 10/12/2007
 
Attention: Dennis McCarthy , Agency Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E5MDS-9810
Name of Grantee:  GE MDS LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Spread Spectrum Data Tranceiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.2  -  927.8 0.955  

Power Output listed is Conducted. The antenna(s) used with this transmitter must be professionally installed. The antenna(s) used with this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing, or antenna(s) of the same type and lesser gain, may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: