FCC ID E5MDS-EL806
EL806 OEM Transnet
by GE MDS LLC
Grantee Code: E5M Product Code: DSEL806
Latest application date: 2011-05-17
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.2-927.6 MHz | Class II permissive change or modification of presently authorized equipment | 2011-05-17 |
| 902.2-927.6 MHz | Class II permissive change or modification of presently authorized equipment | 2005-12-15 |
| 902.2-927.6 MHz | Class II permissive change or modification of presently authorized equipment | 2003-08-20 |
| 902.2-927.6 MHz | Original Equipment | 2003-05-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Host User Manual | Users Manual | 2011-05-17 | PDF 1.7 MB |
| User Manual | Users Manual | 2011-05-17 | PDF 983.8 KB |
| users manual | Users Manual | 2003-05-14 | PDF 1.5 MB |
| Internal Photo | Internal Photos | 2005-12-15 | PDF 190.6 KB |
| internal photos | Internal Photos | 2003-05-14 | PDF 536.1 KB |
| External Photo | External Photos | 2005-12-15 | PDF 254.3 KB |
| external photos | External Photos | 2003-05-14 | PDF 555.7 KB |
| Label Info | ID Label/Location Info | 2005-12-15 | PDF 28.5 KB |
| label sample and location | ID Label/Location Info | 2003-05-14 | PDF 382.4 KB |
| SAR Setup Photos | Test Setup Photos | 2011-05-17 | PDF 548.4 KB |
| Setup Photos | Test Setup Photos | 2011-05-17 | PDF 112.3 KB |
| Test Photos | Test Setup Photos | 2005-12-15 | PDF 185.3 KB |
| test set up photos | Test Setup Photos | 2003-05-14 | PDF 713.5 KB |
| SAR test Report | RF Exposure Info | 2011-05-17 | PDF 1.4 MB |
| Test Report | Test Report | 2011-05-17 | PDF 237.4 KB |
| Test Report Revised | Test Report | 2005-12-15 | PDF 205.5 KB |
| test report | Test Report | 2003-05-14 | PDF 1.1 MB |
| unintentional radiators test report | Test Report | 2003-05-14 | PDF 1.3 MB |
| Agent Authorization | Cover Letter(s) | 2011-05-17 | PDF 254.5 KB |
| Antenna Spec | Cover Letter(s) | 2011-05-17 | PDF 436.3 KB |
| Cover Letter | Cover Letter(s) | 2011-05-17 | PDF 157.9 KB |
| Authorization | Cover Letter(s) | 2005-12-15 | PDF 30.2 KB |
| Comments and Response 1 | Cover Letter(s) | 2005-12-15 | PDF 34.9 KB |
| Comments and Response 2 | Cover Letter(s) | 2005-12-15 | PDF 678.3 KB |
| Comments and Response 3 | Cover Letter(s) | 2005-12-15 | PDF 18.2 KB |
| PC explanation | Cover Letter(s) | 2005-12-15 | PDF 30.5 KB |
| Mfg Letter | Cover Letter(s) | 2003-08-20 | PDF 162.7 KB |
| class II change letter | Cover Letter(s) | 2003-08-20 | PDF 154.9 KB |
| confidentiality letter | Cover Letter(s) | 2003-05-14 | PDF 118.9 KB |
| cover letter | Cover Letter(s) | 2003-05-14 | PDF 161.5 KB |
| MPE calculation | RF Exposure Info | 2011-05-17 | PDF 22.2 KB |
| RF Exposure Info | RF Exposure Info | 2005-12-15 | PDF 55.1 KB |
| block diagram Metadata only | Block Diagram | PDF 72.8 KB | |
| schematics Metadata only | Schematics | PDF 855 KB | |
| operational description Metadata only | Operational Description | PDF 207.8 KB | |
| parts list Metadata only | Parts List/Tune Up Info | PDF 43.7 KB |
Application Information
| Application ID | US4Y6T0hoERmMuIOK6GUXw== |
|---|---|
| Final Action Date | 2011-05-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0016050429 |
| Model | DS-EL806 |
| Frequency Range | 902.2-927.6 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | EL806 OEM Transnet |
| Responsible Party | Dennis W McCarthy, Agency Compliance Engineer, Dennis.Mccarthy2@ge.com  , 585-242-8440 |
| Agent | Mark Mark Mark, Elliott Laboratories, svtcb@NTScorp.com  , 510 578 3500 |
| Test Firm | David Bare, National Technical Systems - Silicon Valley, david.bare@nts.com  , 510-578-3500 |
| TCB Email | SVTCB@ntscorp.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. Professional installation of this product is required. This modular approval is limited to use when installed in devices approved by third-party OEMs, devices produced by the Grantee, or specific devices as shown in application under this FCC ID. The antenna(s) to be used with this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This permissive change adds a 2dBi antenna and a specific portable use host configuration. SAR compliance for body-worn operations are restricted the specific belt-clips/holsters/accessories tested for this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance. The highest reported SAR value is: Body-worn 0.525 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| US4Y6T0hoERmMuIOK6GUXw== | 2011-05-17 | Class II permissive change or modification of presently authorized equipment |
| T5ZtW/pfX2Qmz4QP0+x2Qg== | 2005-12-15 | Class II permissive change or modification of presently authorized equipment |
| ksIVtke3UeI8HzekVyUEBg== | 2003-08-20 | Class II permissive change or modification of presently authorized equipment |
| Ed8NKG+VKNfxLq6SIwEdQg== | 2003-05-14 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application US4Y6T0hoERmMuIOK6GUXw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
National Technical Systems - Silicon Valley 41039 Boyce Road Fremont, CA 94538 |
Date of Grant: 05/17/2011 Application Dated: 05/16/2011 |
| GE MDS LLC |
| 175 Science Parkway |
| Rochester, NY 14620-4261 |
| Attention: Dennis McCarthy , Agency Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E5MDS-EL806 |
| Name of Grantee: | GE MDS LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | EL806 OEM Transnet |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.6 | 1.0 |
| Power listed is conducted. Professional installation of this product is required. This modular approval is limited to use when installed in devices approved by third-party OEMs, devices produced by the Grantee, or specific devices as shown in application under this FCC ID. The antenna(s) to be used with this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This permissive change adds a 2dBi antenna and a specific portable use host configuration. SAR compliance for body-worn operations are restricted the specific belt-clips/holsters/accessories tested for this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance. The highest reported SAR value is: Body-worn 0.525 W/kg. |
EAS Grant - Application US4Y6T0hoERmMuIOK6GUXw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
GE MDS LLC 175 Science Parkway Rochester, NY 14620-4261 United States |
Date of Grant: 05/17/2011 Application Dated: 05/16/2011 |
| Attention: Dennis McCarthy , Agency Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E5MDS-EL806 |
| Name of Grantee: | GE MDS LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | EL806 OEM Transnet |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.6 | 1.0 |
| Power listed is conducted. Professional installation of this product is required. This modular approval is limited to use when installed in devices approved by third-party OEMs, devices produced by the Grantee, or specific devices as shown in application under this FCC ID. The antenna(s) to be used with this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This permissive change adds a 2dBi antenna and a specific portable use host configuration. SAR compliance for body-worn operations are restricted the specific belt-clips/holsters/accessories tested for this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance. The highest reported SAR value is: Body-worn 0.525 W/kg. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/15/2005 Application Dated: 12/15/2005 |
| GE MDS, LLC |
| 175 Science Parkway |
| Rochester, NY 14620-4261 |
| Attention: Justin Smith , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E5MDS-EL806 |
| Name of Grantee: | GE MDS, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | EL806 OEM Transnet |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 902.2 - 927.6 | 1.0 |
| Power listed is conducted. Professional installation of this product is required. This Limited Modular Approval is limited for use when installed in devices approved by third-party OEMs, devices produced by the Grantee, or specific devices as shown in applications under this FCC ID. The antenna(s) to be used with this Limited Modular Approved transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
EAS Grant - Application T5ZtW/pfX2Qmz4QP0+x2Qg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
GE MDS, LLC 175 Science Parkway Rochester, NY 14620-4261 United States |
Date of Grant: 12/15/2005 Application Dated: 12/15/2005 |
| Attention: Justin Smith , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E5MDS-EL806 |
| Name of Grantee: | GE MDS, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | EL806 OEM Transnet |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 902.2 - 927.6 | 1.0 |
| Power listed is conducted. Professional installation of this product is required. This Limited Modular Approval is limited for use when installed in devices approved by third-party OEMs, devices produced by the Grantee, or specific devices as shown in applications under this FCC ID. The antenna(s) to be used with this Limited Modular Approved transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 08/20/2003 Application Dated: 08/20/2003 |
| GE MDS, LLC |
| 175 Science Parkway |
| Rochester, NY 14620-4261 |
| Attention: Justin Smith , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E5MDS-EL806 |
| Name of Grantee: | GE MDS, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | EL806 OEM Transnet |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 902.2 - 927.6 | 1.0 |
| Power listed is conducted. Professional installation of this product is required. This Limited Modular Approval is limited for use when installed in devices approved by third-party OEMs, or produced by the Grantee. The antenna(s) to be used with this Limited Modular Approved transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application ksIVtke3UeI8HzekVyUEBg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
GE MDS, LLC 175 Science Parkway Rochester, NY 14620-4261 United States |
Date of Grant: 08/20/2003 Application Dated: 08/20/2003 |
| Attention: Justin Smith , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E5MDS-EL806 |
| Name of Grantee: | GE MDS, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | EL806 OEM Transnet |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 902.2 - 927.6 | 1.0 |
| Power listed is conducted. Professional installation of this product is required. This Limited Modular Approval is limited for use when installed in devices approved by third-party OEMs, or produced by the Grantee. The antenna(s) to be used with this Limited Modular Approved transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 05/14/2003 Application Dated: 05/14/2003 |
| GE MDS, LLC |
| 175 Science Parkway |
| Rochester, NY 14620-4261 |
| Attention: Justin Smith , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E5MDS-EL806 |
| Name of Grantee: | GE MDS, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | EL806 OEM Transnet |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 902.2 - 927.6 | 1.0 |
| Power listed is conducted. This Modular Approval is limited to OEM installation for mobile and fixed applications only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This module is approved for use with the antennas and minimum length of cables as documented in this filing. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application Ed8NKG+VKNfxLq6SIwEdQg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
GE MDS, LLC 175 Science Parkway Rochester, NY 14620-4261 United States |
Date of Grant: 05/14/2003 Application Dated: 05/14/2003 |
| Attention: Justin Smith , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E5MDS-EL806 |
| Name of Grantee: | GE MDS, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | EL806 OEM Transnet |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 902.2 - 927.6 | 1.0 |
| Power listed is conducted. This Modular Approval is limited to OEM installation for mobile and fixed applications only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This module is approved for use with the antennas and minimum length of cables as documented in this filing. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |