FCC ID E5MDS-NX915

NX915 900 MHz OEM DTS / FHSS Module

by GE MDS LLC

Grantee Code: E5M   Product Code: DSNX915
Latest application date: 2013-11-07

FCC ID Device Details

FCC IDE5MDS-NX915
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeE5M
Product CodeDSNX915
Applicant BusinessGE MDS LLC 🇺🇸
Related Domains ge.com
Equipment ClassNX915 900 MHz OEM DTS / FHSS Module
Test FirmUltraTech Engineering Labs Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.7-927.3 MHzClass II permissive change or modification of presently authorized equipment2013-11-07
902.7-927.3 MHzOriginal Equipment2013-04-24
902.7-927.3 MHzOriginal Equipment2013-04-23

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2013-04-24PDF 469.7 KB
Internal PhotosInternal Photos2013-04-24PDF 383.2 KB
External PhotosExternal Photos2013-04-24PDF 223.6 KB
External Photos_AntennasExternal Photos2013-04-24PDF 176.5 KB
Label & LocationID Label/Location Info2013-04-24PDF 170.1 KB
Setup PhotosTest Setup Photos2013-11-07PDF 603.8 KB
Setup PhotosTest Setup Photos2013-04-24PDF 802.3 KB
Revised Test ReportTest Report2013-11-07PDF 615.1 KB
Updated Test ReportTest Report2013-04-24PDF 1 MB
Test ReportTest Report2013-04-23PDF 1.2 MB
LMA ChecklistAttestation Statements2013-04-24PDF 37.4 KB
Modular Approval RequestAttestation Statements2013-04-24PDF 30.7 KB
Part 15B DeclarationAttestation Statements2013-04-24PDF 25.7 KB
Authority LetterCover Letter(s)2013-11-07PDF 86.9 KB
C2PC Letter_ApplicantCover Letter(s)2013-11-07PDF 43.4 KB
Cover LetterCover Letter(s)2013-11-07PDF 78.7 KB
Authority LetterCover Letter(s)2013-04-24PDF 26 KB
Confidentiality LetterCover Letter(s)2013-04-24PDF 25.7 KB
Cover LetterCover Letter(s)2013-04-24PDF 48.8 KB
Cover LetterCover Letter(s)2013-04-23PDF 49 KB
RF Expo InfoRF Exposure Info2013-11-07PDF 68.6 KB
RF Expo InfoRF Exposure Info2013-04-24PDF 65.7 KB

Application Information

Application ID+94tW+j7Fc/1jTLYIsDaZg==
Final Action Date2013-11-07
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0016050429
ModelDS-NX915
Frequency Range902.7-927.3 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionNX915 900 MHz OEM DTS / FHSS Module
Responsible PartyDennis W McCarthy, Agency Compliance Engineer, Dennis.Mccarthy2@ge.com , 585-242-8440
AgentDan Dan Dan, UltraTech Engineering Labs Inc., dan@ultratech-labs.com , 9058291570
Test FirmDharmajit Solanki, UltraTech Engineering Labs Inc., dharmajit@ultratech-labs.com , 905-829-1570
TCB Emailvic@ultratech-labs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited modular approval. Power listed is conducted. The module may only be installed in professionally installed hosts systems containing the appropriate voltage regulation circuitry and marketed by the OEM detailed in the filing. Marketing to the general public is prohibited. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must be in accordance with configurations described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance. Class II Permissive Change: the software is changed to incorporate a wider bandwidth and higher speed modem operating in the DTS rules.

Applications

Application IDDatePurpose
+94tW+j7Fc/1jTLYIsDaZg==2013-11-07Class II permissive change or modification of presently authorized equipment
/JvOSY5BQ+3q9IDoArpRig==2013-04-24Original Equipment
wlaTRZlj/oR+MR7cQCZ1QA==2013-04-23Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
902.7-927.3 MHz0.62115CBC, CC
902.7-927.3 MHz1.000000015CBC, CC
903.008-926.993 MHz0.75915CBC, CC
903.008-926.993 MHz0.91615CBC, CC
903.315-926.685 MHz115CBC, CC

Grants

TCB Grant - Application wlaTRZlj/oR+MR7cQCZ1QA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada
Date of Grant: 04/23/2013

Application Dated: 04/23/2013
GE MDS LLC
175 Science Parkway
Rochester, NY 14620-4261
 
Attention: Dennis McCarthy , Agency Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E5MDS-NX915
Name of Grantee:  GE MDS LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: NX915 900 MHz OEM DTS / FHSS Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC CC 15C 902.7  -  927.3 1.0  

Limited modular approval. Power listed is conducted. The module may only be installed in professionally installed hosts systems containing the appropriate voltage regulation circuitry and marketed by the OEM detailed in the filing. Marketing to the general public is prohibited. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must be in accordance with configurations described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application wlaTRZlj/oR+MR7cQCZ1QA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

GE MDS LLC
175 Science Parkway
Rochester, NY 14620-4261
United States
  Date of Grant: 04/23/2013

Application Dated: 04/23/2013
 
Attention: Dennis McCarthy , Agency Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E5MDS-NX915
Name of Grantee:  GE MDS LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: NX915 900 MHz OEM DTS / FHSS Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC CC 15C 902.7  -  927.3 1.0  

Limited modular approval. Power listed is conducted. The module may only be installed in professionally installed hosts systems containing the appropriate voltage regulation circuitry and marketed by the OEM detailed in the filing. Marketing to the general public is prohibited. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must be in accordance with configurations described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application /JvOSY5BQ+3q9IDoArpRig==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada
Date of Grant: 04/24/2013

Application Dated: 04/23/2013
GE MDS LLC
175 Science Parkway
Rochester, NY 14620-4261
 
Attention: Dennis McCarthy , Agency Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E5MDS-NX915
Name of Grantee:  GE MDS LLC
Equipment Class: Digital Transmission System
Notes: NX915 900 MHz OEM DTS / FHSS Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC CC 15C 902.7  -  927.3 0.621  
BC CC 15C 903.0075  -  926.9925 0.759  
BC CC 15C 903.0075  -  926.9925 0.916  

Limited modular approval. Power listed is conducted. The module may only be installed in professionally installed hosts systems containing the appropriate voltage regulation circuitry and marketed by the OEM detailed in the filing. Marketing to the general public is prohibited. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must be in accordance with configurations described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application /JvOSY5BQ+3q9IDoArpRig==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

GE MDS LLC
175 Science Parkway
Rochester, NY 14620-4261
United States
  Date of Grant: 04/24/2013

Application Dated: 04/23/2013
 
Attention: Dennis McCarthy , Agency Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E5MDS-NX915
Name of Grantee:  GE MDS LLC
Equipment Class: Digital Transmission System
Notes: NX915 900 MHz OEM DTS / FHSS Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC CC 15C 902.7  -  927.3 0.621  
BC CC 15C 903.0075  -  926.9925 0.759  
BC CC 15C 903.0075  -  926.9925 0.916  

Limited modular approval. Power listed is conducted. The module may only be installed in professionally installed hosts systems containing the appropriate voltage regulation circuitry and marketed by the OEM detailed in the filing. Marketing to the general public is prohibited. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must be in accordance with configurations described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application +94tW+j7Fc/1jTLYIsDaZg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada
Date of Grant: 11/07/2013

Application Dated: 11/07/2013
GE MDS LLC
175 Science Parkway
Rochester, NY 14620-4261
 
Attention: Dennis McCarthy , Agency Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E5MDS-NX915
Name of Grantee:  GE MDS LLC
Equipment Class: Digital Transmission System
Notes: NX915 900 MHz OEM DTS / FHSS Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC CC 15C 902.7  -  927.3 0.621  
BC CC 15C 903.0075  -  926.9925 0.759  
BC CC 15C 903.0075  -  926.9925 0.916  
BC CC 15C 903.315  -  926.685 1.0  

Limited modular approval. Power listed is conducted. The module may only be installed in professionally installed hosts systems containing the appropriate voltage regulation circuitry and marketed by the OEM detailed in the filing. Marketing to the general public is prohibited. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must be in accordance with configurations described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance.

Class II Permissive Change: the software is changed to incorporate a wider bandwidth and higher speed modem operating in the DTS rules.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application +94tW+j7Fc/1jTLYIsDaZg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

GE MDS LLC
175 Science Parkway
Rochester, NY 14620-4261
United States
  Date of Grant: 11/07/2013

Application Dated: 11/07/2013
 
Attention: Dennis McCarthy , Agency Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  E5MDS-NX915
Name of Grantee:  GE MDS LLC
Equipment Class: Digital Transmission System
Notes: NX915 900 MHz OEM DTS / FHSS Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC CC 15C 902.7  -  927.3 0.621  
BC CC 15C 903.0075  -  926.9925 0.759  
BC CC 15C 903.0075  -  926.9925 0.916  
BC CC 15C 903.315  -  926.685 1.0  

Limited modular approval. Power listed is conducted. The module may only be installed in professionally installed hosts systems containing the appropriate voltage regulation circuitry and marketed by the OEM detailed in the filing. Marketing to the general public is prohibited. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must be in accordance with configurations described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance.

Class II Permissive Change: the software is changed to incorporate a wider bandwidth and higher speed modem operating in the DTS rules.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: