FCC ID E5MDS-RCL220

E5M-DS-RCL220, E5M DSRCL220, E5MDS-RCL220, E5MDS-RCL22O, E5MD5-RCL220, ESMDS-RCL220

GE MDS, LLC 220MHz Data Transceiver Module for use in the GE MDS Orbit platform DS-RCL220

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: E5MDS-RCL220 is E5M. The remaining characters of the FCC ID, DS-RCL220, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: 220MHz Data Transceiver Module for use in the GE MDS Orbit platform

Application: 220MHz Data Transceiver Module for use in the GE MDS Orbit platform
Equipment Class: TNB - Licensed Non-Broadcast Station Transmitter
Short Link: fcc.id/E5MDS-RCL220
Sources: FCC.gov | FCC.report
Registered By: GE MDS, LLC - E5M (United States)

App #	Purpose	Date	Unique ID
1	Original Equipment	2023-12-13	NnVzqVE16vfcabGDza36ag==

Operating Frequencies

Frequency Range	Power Output	Tolerance	Emission Designator	Rule Parts	Line Entry
217.0125-219.9875 MHz	1.9231 Watts	0.75ppm	6K57G1D	90.259	1
220-222 MHz	1.9588 Watts	0.86ppm	6K57G1D	90T	2

Exhibits

Document	Type	Submitted Available
RCL220 Module Integration Guide R1	Users Manual Adobe Acrobat PDF (738 kB)	2023-11-21 2024-01-27
Label and location	ID Label/Location Info Adobe Acrobat PDF (769 kB)	2023-11-13 2023-12-13
Label	ID Label/Location Info Adobe Acrobat PDF (483 kB)	2023-11-13 2023-12-13
RF exposure	RF Exposure Info Adobe Acrobat PDF (230 kB)	2023-11-13 2023-12-13
RCL220 FCC Part 90 test report	Test Report Adobe Acrobat PDF (2070 kB)	2023-11-13 2023-12-13
Confidentiality Request letter	Cover Letter(s) Adobe Acrobat PDF (244 kB)	2023-11-13 2023-12-13
FCC Modular Approval Request	Cover Letter(s) Adobe Acrobat PDF (43 kB)	2023-11-13 2023-12-13
Internal photo	Internal Photos Adobe Acrobat PDF (613 kB)	2023-11-13 2024-01-27
External photo	External Photos Adobe Acrobat PDF (2316 kB)	2023-11-13 2024-01-27
test setup photo	Test Setup Photos Adobe Acrobat PDF (395 kB)	2023-11-13 2024-01-27
Agent Authorization	Cover Letter(s) Adobe Acrobat PDF (235 kB)	2023-11-13 2023-12-13
US agent for service of process	Attestation Statements Adobe Acrobat PDF (89 kB)	2023-11-13 2023-12-13
Certification Applicant	Attestation Statements Adobe Acrobat PDF (143 kB)	2023-11-13 2023-12-13
Certification Equipment Type	Attestation Statements Adobe Acrobat PDF (152 kB)	2023-11-13 2023-12-13
Operation description	Operational Description Adobe Acrobat PDF (789 kB)	2023-11-13
RCL220 Module Integration Guide	Users Manual Adobe Acrobat PDF (738 kB)	2023-11-21 2024-01-27
Attestation Statements BOM	Parts List/Tune Up Info Adobe Acrobat PDF (539 kB)	2023-11-13
Host Integration instruction	Users Manual Adobe Acrobat PDF (923 kB)	2023-11-13 2024-01-27
Block diagram	Block Diagram Adobe Acrobat PDF (104 kB)	2023-11-13
Schematics	Schematics Adobe Acrobat PDF (1405 kB)	2023-11-13

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	GE MDS, LLC
FCC Registration Number (FRN):	0033030735
Alphanumeric FCC ID:	E5MDSRCL220
Unique Application Identifier:	NnVzqVE16vfcabGDza36ag==
Line one:	175 Science Parkway
City:	Rochester
State:	New York
Country:	United States
Zip Code:	14620-4261

TCB Information

TCB Application Email Address:	certification@micomlabs.com
TCB Scope:	B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)

FCC ID

Grantee Code:	E5M
Product Code:	DS-RCL220

Person at the applicant's address to receive grant or for contact

Name:	John Barenys
Title:	Senior Operations Manager

Telephone Number:

585-683-4254

Extension:

Fax Number:	585-241-5590
Email:	john.barenys@ge.com

Technical Contact

Firm Name:	GE MDS, LLC
Country:	United States

E-Mail:

john.barenys@ge.com

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: Yes

If so, specify the short-term confidentiality release date (MM/DD/YYYY format): 01/27/2024
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	220MHz Data Transceiver Module for use in the GE MDS Orbit platform

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? Yes

Modular Equipment

Modular Type: Limited Single Modular Approval

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: MiCOM Labs

First Name: Gordon

Last Name: Hurst

Telephone Number:

925-462-0304

Extension:

Fax Number: 925-462-0306

E-mail: gordon_hurst@micomlabs.com

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Limited Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 36 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: John Barenys

Title of authorized signature:

Grants

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566

Date of Grant: 12/13/2023

Application Dated: 11/13/2023

GE MDS, LLC

175 Science Parkway

Rochester, NY 14620-4261

Attention: John Barenys , Senior Operations Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	E5MDS-RCL220

Name of Grantee:	GE MDS, LLC

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	220MHz Data Transceiver Module for use in the GE MDS Orbit platform
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90.259	217.0125 - 219.9875	1.9231	0.75 PM	6K57G1D
	90T	220.0 - 222.0	1.9588	0.86 PM	6K57G1D

Limited Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 36 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

GE MDS, LLC
175 Science Parkway
Rochester, NY 14620-4261
United States