FCC ID E675JS0101
Wideband Radio Heads (WRH)
by Powerwave Technologies Inc
Grantee Code: E67 Product Code: 5JS0101
Latest application date: 2008-04-22
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 940-941 MHz | Original Equipment | 2008-04-22 |
| 935-940 MHz | Original Equipment | 2008-04-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2008-04-22 | PDF 623.7 KB |
| External Photos | External Photos | 2008-04-22 | PDF 236.9 KB |
| ID Label Location | ID Label/Location Info | 2008-04-22 | PDF 553.8 KB |
| Operational Description | Operational Description | 2008-04-22 | PDF 6.9 KB |
| Part 24E Photos | Test Setup Photos | 2008-04-22 | PDF 56.9 KB |
| Part 90 Test Setup Photos | Test Setup Photos | 2008-04-22 | PDF 56.9 KB |
| Test Report 1 | Test Report | 2008-04-22 | PDF 215.3 KB |
| Test Report 2 | Test Report | 2008-04-22 | PDF 585.1 KB |
| Test Report 3 | Test Report | 2008-04-22 | PDF 257.6 KB |
| Authorization Letter | Cover Letter(s) | 2008-04-22 | PDF 13 KB |
| Confidentiality Letter | Cover Letter(s) | 2008-04-22 | PDF 34.9 KB |
| TCB Correspondance | Cover Letter(s) | 2008-04-22 | PDF 21.2 KB |
| Parts List and Tune Up Info | Parts List/Tune Up Info | 2008-04-22 | PDF 623.7 KB |
| Parts list and Tune up Information | Parts List/Tune Up Info | 2008-04-22 | PDF 623.7 KB |
Application Information
| Application ID | D+gkKWTpGoJfQ90QAx0HkA== |
|---|---|
| Final Action Date | 2008-04-22 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0006343024 |
| Model | 5JS0101 |
| Frequency Range | 940-941 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | Wideband Radio Heads (WRH) |
| Responsible Party | Jeff Dale, Principal Reliability Engineer, jdale@pwav.com  , 714 466-1476 |
| Agent | Jessina Jessina Jessina, CKC Certification Services, LLC, TCB@ckccertification.com  , 209-966-5240 |
| Technical Contact | Jessina Hunter, CKC Certification Services, LLC, TCB@ckccertification.com , 209-966-5240 |
| Test Firm | Steve Behm, CKC Laboratories, Inc., steve.behm@ckc.com  , 2099665240 |
| TCB Email | TCB@ckccertification.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 20W and the peak radiated output power must not exceed 1000W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| D+gkKWTpGoJfQ90QAx0HkA== | 2008-04-22 | Original Equipment |
| 1kBHNEdO9jnd2oaosRf4Pw== | 2008-04-22 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application D+gkKWTpGoJfQ90QAx0HkA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 04/22/2008 Application Dated: 04/21/2008 |
| Powerwave Technologies Inc |
| 1801 E St Andrew Pl. |
| Santa Ana, CA 92705 |
| Attention: Jeff Dale , Principal Reliability Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E675JS0101 |
| Name of Grantee: | Powerwave Technologies Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Wideband Radio Heads (WRH) |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24D | 940.0 - 941.0 | 20.0 | Amp | D7W | |
| 24E | 1930.0 - 1990.0 | 20.0 | Amp | F9W | |
| 24E | 1930.0 - 1990.0 | 20.0 | Amp | G7W | |
| 24E | 1930.0 - 1990.0 | 20.0 | Amp | GXW | |
| 24E | 1930.0 - 1990.0 | 20.0 | Amp | DXW |
| Power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 20W and the peak radiated output power must not exceed 1000W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. |
EAS Grant - Application D+gkKWTpGoJfQ90QAx0HkA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Powerwave Technologies Inc 1801 E St Andrew Pl. Santa Ana, CA 92705 United States |
Date of Grant: 04/22/2008 Application Dated: 04/21/2008 |
| Attention: Jeff Dale , Principal Reliability Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E675JS0101 |
| Name of Grantee: | Powerwave Technologies Inc |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Wideband Radio Heads (WRH) |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24D | 940.0 - 941.0 | 20.0 | Amp | D7W | |
| 24E | 1930.0 - 1990.0 | 20.0 | Amp | F9W | |
| 24E | 1930.0 - 1990.0 | 20.0 | Amp | G7W | |
| 24E | 1930.0 - 1990.0 | 20.0 | Amp | GXW | |
| 24E | 1930.0 - 1990.0 | 20.0 | Amp | DXW |
| Power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 20W and the peak radiated output power must not exceed 1000W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 04/22/2008 Application Dated: 04/21/2008 |
| Powerwave Technologies Inc |
| 1801 E St Andrew Pl. |
| Santa Ana, CA 92705 |
| Attention: Jeff Dale , Principal Reliability Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E675JS0101 |
| Name of Grantee: | Powerwave Technologies Inc |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Wideband Radio Heads (WRH) |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 935.0 - 940.0 | 20.0 | Amp | D7W |
| Power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 20W and the peak radiated output power must not exceed 1000W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. |
EAS Grant - Application 1kBHNEdO9jnd2oaosRf4Pw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Powerwave Technologies Inc 1801 E St Andrew Pl. Santa Ana, CA 92705 United States |
Date of Grant: 04/22/2008 Application Dated: 04/21/2008 |
| Attention: Jeff Dale , Principal Reliability Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | E675JS0101 |
| Name of Grantee: | Powerwave Technologies Inc |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Wideband Radio Heads (WRH) |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 935.0 - 940.0 | 20.0 | Amp | D7W |
| Power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 20W and the peak radiated output power must not exceed 1000W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. |
| Mail To: |