FCC ID EHA-BTM4
BTM4
by Intermec Technologies Corporation
Grantee Code: EHA Product Code: BTM4
Latest application date: 2009-02-17
FCC ID Device Details
| FCC ID | EHA-BTM4 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | EHA |
| Product Code | BTM4 |
| Applicant Business | Intermec Technologies Corporation 🇺🇸 |
| Related Domains |  honeywell.com |
| Equipment Class | BTM4 |
| Test Firm | Northwest EMC, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2009-02-17 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2008-10-27 |
| 2402-2480 MHz | Original Equipment | 2008-03-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Test Setup Photos | 2009-02-17 | PDF 1.9 MB |
| User Manual | Users Manual | 2008-10-27 | PDF 1.9 MB |
| Compliance Insert | Users Manual | 2008-03-12 | PDF 1,019.9 KB |
| User Manual | Users Manual | 2008-03-12 | PDF 804.4 KB |
| Internal photos | Internal Photos | 2008-03-12 | PDF 687.7 KB |
| External Photos | External Photos | 2009-02-17 | PDF 887.4 KB |
| External Photos | External Photos | 2008-03-12 | PDF 86 KB |
| ID Label | ID Label/Location Info | 2008-03-12 | PDF 32.5 KB |
| Antenna Info | Operational Description | 2008-03-12 | PDF 62.7 KB |
| Exclusive Test Setup Photos | Test Setup Photos | 2008-03-12 | PDF 454.6 KB |
| NWEMC Test Setup Photos | Test Setup Photos | 2008-03-12 | PDF 879.7 KB |
| Exclusive Test Report part 1 | Test Report | 2008-03-12 | PDF 3.3 MB |
| Exclusive Test Report part 2 | Test Report | 2008-03-12 | PDF 2.7 MB |
| NWEMC Test report | Test Report | 2008-03-12 | PDF 1.6 MB |
| Attestation regrading modulation limitations | Attestation Statements | 2008-03-12 | PDF 113.5 KB |
| Agent authorization letter | Cover Letter(s) | 2009-02-17 | PDF 89.1 KB |
| Compliance Opinion | Cover Letter(s) | 2009-02-17 | PDF 15.4 KB |
| Cover letter | Cover Letter(s) | 2009-02-17 | PDF 33 KB |
| Agent Authorization letter | Cover Letter(s) | 2008-10-27 | PDF 89.1 KB |
| Compliance Opinion | Cover Letter(s) | 2008-10-27 | PDF 15.7 KB |
| Cover Letter | Cover Letter(s) | 2008-10-27 | PDF 33 KB |
| Compliance Opinion | Cover Letter(s) | 2008-03-12 | PDF 15.2 KB |
| Cover letter | Cover Letter(s) | 2008-03-12 | PDF 115.2 KB |
| Modular approval letter | Cover Letter(s) | 2008-03-12 | PDF 116.3 KB |
| Request for confidentiality | Cover Letter(s) | 2008-03-12 | PDF 116.4 KB |
| MPE estimates | RF Exposure Info | 2009-02-17 | PDF 912.8 KB |
| RF Exposure | RF Exposure Info | 2008-10-27 | PDF 907.8 KB |
| MPE Estimates CK61 with IP30 | RF Exposure Info | 2008-03-12 | PDF 11.4 KB |
| MPE Estimates CN3 EHA01CN3 with IP30 | RF Exposure Info | 2008-03-12 | PDF 12.6 KB |
| MPE Estimates CN3 EHA06CN3 with IP30 | RF Exposure Info | 2008-03-12 | PDF 12.6 KB |
Application Information
| Application ID | s0yr0RlwdNMZauNKJEhPyg== |
|---|---|
| Final Action Date | 2009-02-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006654503 |
| Model | -BTM4 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | BTM4 |
| Responsible Party | Brian Rudick, VP & GC, Honeywell Scanning & Mobility, brian.rudick@honeywell.com , 803-835-8769 |
| Agent | Sean Sean Sean, Intermec, sean.mackellar@intermec.com  , 425-356-1765 |
| Test Firm | Greg Kiemel, Northwest EMC, Inc., gkiemel@nwemc.com  , 503-844-4066 |
| TCB Email | dtolman@nwemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Singular Modular Approval. Output power is peak conducted. Portable exposure conditions are limited to 9.64 mW peak conducted and must not be co-located or operating in conjunction with any other antenna or transmitter. Mobile exposure conditions are limited to 28.8mW peak conducted and must not be co-located or operating in conjunction with any other antenna or transmitter. Collocated transmitter operating configurations in the grantees model IP30 RFID scanner have been evaluated as described in filings under this FCC ID with optional FCC IDs EHAIM4 (Model IP30), EHA802UIAG (Model CK61), HN2-BTM311 (Model CK61), EHA-01CN3 (Model CN3), EHA-06CN3 (Model CN3e), EHA-CK3DHIB (Model CK3) and EHA-CK3DDIB (Model CK3). Other collocation configurations require separate evaluation. For mobile collocated operating configurations in the IP30 as described in this and previous filings under this FCC ID, the antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Additionally, for operating configurations in the IP30, operation is limited to 9.64 mW peak conducted and non-EDR modes only. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| s0yr0RlwdNMZauNKJEhPyg== | 2009-02-17 | Class II permissive change or modification of presently authorized equipment |
| fRQ3gn85iRDR/NlHn+klDQ== | 2008-10-27 | Class II permissive change or modification of presently authorized equipment |
| oSD6xLuHA922p968J9ZG5g== | 2008-03-12 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0288000 | 15C |
Grants
TCB Grant - Application s0yr0RlwdNMZauNKJEhPyg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 02/17/2009 Application Dated: 02/17/2009 |
| Intermec Technologies Corporation |
| 9680 Old Bailes Rd. |
| Fort Mill, SC 29707 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHA-BTM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | BTM4 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0288 |
| Limited Singular Modular Approval. Output power is peak conducted. Portable exposure conditions are limited to 9.64 mW peak conducted and must not be co-located or operating in conjunction with any other antenna or transmitter. Mobile exposure conditions are limited to 28.8mW peak conducted and must not be co-located or operating in conjunction with any other antenna or transmitter. Collocated transmitter operating configurations in the grantees model IP30 RFID scanner have been evaluated as described in filings under this FCC ID with optional FCC IDs EHAIM4 (Model IP30), EHA802UIAG (Model CK61), HN2-BTM311 (Model CK61), EHA-01CN3 (Model CN3), EHA-06CN3 (Model CN3e), EHA-CK3DHIB (Model CK3) and EHA-CK3DDIB (Model CK3). Other collocation configurations require separate evaluation. For mobile collocated operating configurations in the IP30 as described in this and previous filings under this FCC ID, the antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Additionally, for operating configurations in the IP30, operation is limited to 9.64 mW peak conducted and non-EDR modes only. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application s0yr0RlwdNMZauNKJEhPyg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States |
Date of Grant: 02/17/2009 Application Dated: 02/17/2009 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHA-BTM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | BTM4 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0288 |
| Limited Singular Modular Approval. Output power is peak conducted. Portable exposure conditions are limited to 9.64 mW peak conducted and must not be co-located or operating in conjunction with any other antenna or transmitter. Mobile exposure conditions are limited to 28.8mW peak conducted and must not be co-located or operating in conjunction with any other antenna or transmitter. Collocated transmitter operating configurations in the grantees model IP30 RFID scanner have been evaluated as described in filings under this FCC ID with optional FCC IDs EHAIM4 (Model IP30), EHA802UIAG (Model CK61), HN2-BTM311 (Model CK61), EHA-01CN3 (Model CN3), EHA-06CN3 (Model CN3e), EHA-CK3DHIB (Model CK3) and EHA-CK3DDIB (Model CK3). Other collocation configurations require separate evaluation. For mobile collocated operating configurations in the IP30 as described in this and previous filings under this FCC ID, the antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Additionally, for operating configurations in the IP30, operation is limited to 9.64 mW peak conducted and non-EDR modes only. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 03/12/2008 Application Dated: 03/12/2008 |
| Intermec Technologies Corporation |
| 9680 Old Bailes Rd. |
| Fort Mill, SC 29707 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHA-BTM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | BTM4 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0288 |
| Limited Modular Approval. Output power is peak conducted. Portable exposure conditions are limited to 9.64 mW peak conducted and must not be co-located or operating in conjunction with any other antenna or transmitter. Mobile exposure conditions are limited to 28.8mW peak conducted and must not be co-located or operating in conjunction with any other antenna or transmitter. Collocated transmitter operating configurations in the grantees model IP30 RFID scanner have been evaluated as described in this filing with optional FCC IDs EHAIM4 (Model IP30), EHA802UIAG (Model CK61), HN2-BTM311 (Model CK61), EHA-01CN3 (Model CN3), and EHA-06CN3 (Model CN3e). Other collocation configurations require separate evaluation. For mobile collocated operating configurations in the IP30 as described in this filing, the antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Additionally, for operating configurations in the IP30, operation is limited to 9.64 mW peak conducted and non-EDR modes only. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application oSD6xLuHA922p968J9ZG5g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States |
Date of Grant: 03/12/2008 Application Dated: 03/12/2008 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHA-BTM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | BTM4 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0288 |
| Limited Modular Approval. Output power is peak conducted. Portable exposure conditions are limited to 9.64 mW peak conducted and must not be co-located or operating in conjunction with any other antenna or transmitter. Mobile exposure conditions are limited to 28.8mW peak conducted and must not be co-located or operating in conjunction with any other antenna or transmitter. Collocated transmitter operating configurations in the grantees model IP30 RFID scanner have been evaluated as described in this filing with optional FCC IDs EHAIM4 (Model IP30), EHA802UIAG (Model CK61), HN2-BTM311 (Model CK61), EHA-01CN3 (Model CN3), and EHA-06CN3 (Model CN3e). Other collocation configurations require separate evaluation. For mobile collocated operating configurations in the IP30 as described in this filing, the antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Additionally, for operating configurations in the IP30, operation is limited to 9.64 mW peak conducted and non-EDR modes only. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 10/27/2008 Application Dated: 10/27/2008 |
| Intermec Technologies Corporation |
| 9680 Old Bailes Rd. |
| Fort Mill, SC 29707 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHA-BTM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | BTM4 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0288 |
| Limited Singular Modular Approval. Output power is peak conducted. Portable exposure conditions are limited to 9.64 mW peak conducted and must not be co-located or operating in conjunction with any other antenna or transmitter. Mobile exposure conditions are limited to 28.8mW peak conducted and must not be co-located or operating in conjunction with any other antenna or transmitter. Collocated transmitter operating configurations in the grantees model IP30 RFID scanner have been evaluated as described in filings under this FCC ID with optional FCC IDs EHAIM4 (Model IP30), EHA802UIAG (Model CK61), HN2-BTM311 (Model CK61), EHA-01CN3 (Model CN3), EHA-06CN3 (Model CN3e), and EHA-CK3DHIB (Model CK3). Other collocation configurations require separate evaluation. For mobile collocated operating configurations in the IP30 as described in this and previous filings under this FCC ID, the antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Additionally, for operating configurations in the IP30, operation is limited to 9.64 mW peak conducted and non-EDR modes only. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Limited Single Modular |
EAS Grant - Application fRQ3gn85iRDR/NlHn+klDQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States |
Date of Grant: 10/27/2008 Application Dated: 10/27/2008 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHA-BTM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | BTM4 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0288 |
| Limited Singular Modular Approval. Output power is peak conducted. Portable exposure conditions are limited to 9.64 mW peak conducted and must not be co-located or operating in conjunction with any other antenna or transmitter. Mobile exposure conditions are limited to 28.8mW peak conducted and must not be co-located or operating in conjunction with any other antenna or transmitter. Collocated transmitter operating configurations in the grantees model IP30 RFID scanner have been evaluated as described in filings under this FCC ID with optional FCC IDs EHAIM4 (Model IP30), EHA802UIAG (Model CK61), HN2-BTM311 (Model CK61), EHA-01CN3 (Model CN3), EHA-06CN3 (Model CN3e), and EHA-CK3DHIB (Model CK3). Other collocation configurations require separate evaluation. For mobile collocated operating configurations in the IP30 as described in this and previous filings under this FCC ID, the antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Additionally, for operating configurations in the IP30, operation is limited to 9.64 mW peak conducted and non-EDR modes only. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Limited Single Modular |
| Mail To: |