1. FCC ID
  2. EHA
  3. EHA-RC10

FCC ID EHA-RC10

802.11bg, BT, WWAN Combo Module

by Intermec Technologies Corporation

Grantee Code: EHA   Product Code: RC10
Latest application date: 2009-01-31

FCC ID Device Details

FCC IDEHA-RC10
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeEHA
Product CodeRC10
Applicant BusinessIntermec Technologies Corporation 🇺🇸
Related Domains honeywell.com
Equipment Class802.11bg, BT, WWAN Combo Module
Test FirmCompliance Certification Services

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: J9CFENWAY-1 Grant Date: 01/08/20092009-01-31
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: J9CFENWAY-1 Grant Date: 01/08/20092009-01-31
824.2-848.8 MHzChange in identification of presently authorized equipment. Original FCC ID: J9CFENWAY-1 Grant Date: 01/08/20092009-01-31

Exhibits

DocumentTypeAvailableFile
External PhotosExternal Photos2009-01-31PDF 265.9 KB
FCC ID label formatID Label/Location Info2009-01-31PDF 95.9 KB
FCC ID label format and locationID Label/Location Info2009-01-31PDF 95.9 KB
Applicant Request LetterCover Letter(s)2009-01-31PDF 43.5 KB
Applicant request letterCover Letter(s)2009-01-31PDF 43.5 KB
Authorization letterCover Letter(s)2009-01-31PDF 35.2 KB

Application Information

Application IDlYkYGwSz//yxwXNfr355iQ==
Final Action Date2009-01-31
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: J9CFENWAY-1 Grant Date: 01/08/2009
Applicant FRN0006654503
Model-RC10
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11bg, BT, WWAN Combo Module
Responsible PartyBrian Rudick, VP & GC, Honeywell Scanning & Mobility, brian.rudick@honeywell.com , 803-835-8769
AgentThu Thu Thu, Compliance Certification Services, thu.chan@ccsemc.com , 510-771-1000
Test FirmThu Chan, Compliance Certification Services, thu.chan@ccsemc.com , 510-771-1122
TCB Emailmike.kuo@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval. Power listed is the maximum peak conducted output power. Approval is limited to OEM installation only. RF Exposure compliance of this device in all final host configurations is the responsibility of the Grantee. For Mobile RF exposure category, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Portable RF Exposure category use requires SAR evaluation and additional certification for host-specific installations. Antennas must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
lYkYGwSz//yxwXNfr355iQ==2009-01-31Change in identification of presently authorized equipment. Original FCC ID: J9CFENWAY-1 Grant Date: 01/08/2009
L0hi/ab4nihpc3Q2Gk09cg==2009-01-31Change in identification of presently authorized equipment. Original FCC ID: J9CFENWAY-1 Grant Date: 01/08/2009
I/qibC3D0gKQYjc04qy5pw==2009-01-31Change in identification of presently authorized equipment. Original FCC ID: J9CFENWAY-1 Grant Date: 01/08/2009

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.2-848.8 MHz1.8662.5ppm244KGXW22H
824.2-848.8 MHz1.0962.5ppm248KG7W22H
826.4-846.6 MHz0.3092.5ppm4M19F9W22H
1712.4-1754 MHz0.2822.5ppm4M24F9W27
1850.2-1909.8 MHz0.8992.5ppm246KGXW24E
1850.2-1909.8 MHz0.8412.5ppm246KG7W24E
1852.4-1907.5 MHz0.3162.5ppm4M20F9W24E
2402-2480 MHz0.001640015C
2412-2462 MHz0.194540015C

Grants

TCB Grant - Application lYkYGwSz//yxwXNfr355iQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 01/31/2009

Application Dated: 01/31/2009
Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EHA-RC10
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: Digital Transmission System
Notes: 802.11bg, BT, WWAN Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.19454  

Modular Approval. Power listed is the maximum peak conducted output power. Approval is limited to OEM installation only. RF Exposure compliance of this device in all final host configurations is the responsibility of the Grantee. For Mobile RF exposure category, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Portable RF Exposure category use requires SAR evaluation and additional certification for host-specific installations. Antennas must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

EAS Grant - Application lYkYGwSz//yxwXNfr355iQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
United States 		  Date of Grant: 01/31/2009

Application Dated: 01/31/2009
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EHA-RC10
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: Digital Transmission System
Notes: 802.11bg, BT, WWAN Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.19454  

Modular Approval. Power listed is the maximum peak conducted output power. Approval is limited to OEM installation only. RF Exposure compliance of this device in all final host configurations is the responsibility of the Grantee. For Mobile RF exposure category, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Portable RF Exposure category use requires SAR evaluation and additional certification for host-specific installations. Antennas must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.



TCB Grant - Application L0hi/ab4nihpc3Q2Gk09cg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 01/31/2009

Application Dated: 01/31/2009
Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EHA-RC10
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11bg, BT, WWAN Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.00164  

Modular Approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filing may be used with this transmitter. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application L0hi/ab4nihpc3Q2Gk09cg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
United States 		  Date of Grant: 01/31/2009

Application Dated: 01/31/2009
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EHA-RC10
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11bg, BT, WWAN Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.00164  

Modular Approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filing may be used with this transmitter. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application I/qibC3D0gKQYjc04qy5pw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 01/31/2009

Application Dated: 01/31/2009
Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EHA-RC10
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: PCS Licensed Transmitter
Notes: 802.11bg, BT, WWAN Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.866 2.5  PM 244KGXW
22H 824.2  -  848.8 1.096 2.5  PM 248KG7W
22H 826.4  -  846.6 0.309 2.5  PM 4M19F9W
24E 1850.2  -  1909.8 0.899 2.5  PM 246KGXW
24E 1850.2  -  1909.8 0.841 2.5  PM 246KG7W
24E 1852.4  -  1907.5 0.316 2.5  PM 4M20F9W
27 1712.4  -  1754.0 0.282 2.5  PM 4M24F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.0715 W, Part 24 EIRP 0.8318 W, Part 27 0.6026 W. This device contains modes not operational in U.S. Territories. Modular Approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters except in accordance with FCC multi-transmitter product procedures.. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into portable RF Exposure category devices requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application I/qibC3D0gKQYjc04qy5pw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
United States 		  Date of Grant: 01/31/2009

Application Dated: 01/31/2009
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EHA-RC10
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: PCS Licensed Transmitter
Notes: 802.11bg, BT, WWAN Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.866 2.5  PM 244KGXW
22H 824.2  -  848.8 1.096 2.5  PM 248KG7W
22H 826.4  -  846.6 0.309 2.5  PM 4M19F9W
24E 1850.2  -  1909.8 0.899 2.5  PM 246KGXW
24E 1850.2  -  1909.8 0.841 2.5  PM 246KG7W
24E 1852.4  -  1907.5 0.316 2.5  PM 4M20F9W
27 1712.4  -  1754.0 0.282 2.5  PM 4M24F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.0715 W, Part 24 EIRP 0.8318 W, Part 27 0.6026 W. This device contains modes not operational in U.S. Territories. Modular Approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters except in accordance with FCC multi-transmitter product procedures.. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into portable RF Exposure category devices requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: