FCC ID EHA700C-SMC45-1

This application does not exist.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 12/28/2004 Application Dated: 11/24/2004

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHA700C-SMC45-1
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	PCS Licensed Transmitter held to ear
Notes:	GPRS portable to allow co-location with IP3
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	24E	1850.2  -  1909.8	0.891	0.03  PM	300KGXW

Radiated power is .891 W EIRP. This transmitter operates only in the grantees Model 700C. Co-located transmitter operating configurations with optional WLAN FCC ID: HN22011B-2 and optional Bluetooth FCC ID: (HN2ABTM3-3 or FCC ID: EHABTS080) have been evaluated as described in this filing. This transmitter may also be co-located with Intermec's Bluetooth-enabled printer, Model 6820, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When configured with the IP3 or the 6820, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. Other co-location configurations require separate evaluation. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 WLAN body-worn 0.15 W/kg Part 24 Head: 0.65 W/kg; Body-worn: 0.57 W/kg.

TCB Grant - Application kk0dBglM1rm5gCalAD8xaw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124

Date of Grant: 07/07/2004 Application Dated: 07/07/2004

Intermec Technologies Corporation

9680 Old Bailes Rd.

Fort Mill, SC 29707

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHA700C-SMC45-1
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	PCS Licensed Transmitter held to ear
Notes:	SMC45 in 700C

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	24E	1850.2  -  1909.8	0.891	0.03  PM	300KGXW

Radiated power is .891 W EIRP. This transmitter operates only in the grantees Model 700C. Co-located transmitter operating configurations with optional WLAN FCC ID: HN22011B-2 and optional Bluetooth FCC ID: HN2ABTM3-3 have been evaluated as described in this filing. This transmitter may also be co-located with Intermec’s Bluetooth-enabled printer, Model 6820, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When configured with the IP3 or the 6820, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. Other co-location configurations require separate evaluation. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 WLAN body-worn 0.15 W/kg Part 24 Head: 0.65 W/kg; Body-worn: 0.57 W/kg.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 07/07/2004 Application Dated: 07/07/2004

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHA700C-SMC45-1
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	PCS Licensed Transmitter held to ear
Notes:	SMC45 in 700C
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	24E	1850.2  -  1909.8	0.891	0.03  PM	300KGXW

Radiated power is .891 W EIRP. This transmitter operates only in the grantees Model 700C. Co-located transmitter operating configurations with optional WLAN FCC ID: HN22011B-2 and optional Bluetooth FCC ID: HN2ABTM3-3 have been evaluated as described in this filing. This transmitter may also be co-located with Intermec’s Bluetooth-enabled printer, Model 6820, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When configured with the IP3 or the 6820, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. Other co-location configurations require separate evaluation. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 WLAN body-worn 0.15 W/kg Part 24 Head: 0.65 W/kg; Body-worn: 0.57 W/kg.

TCB Grant - Application Fnctu+oXoU99XWbq+gd6mg==

EAS Grant - Application Fnctu+oXoU99XWbq+gd6mg==

TCB Grant - Application AKcxxypA4qMkMX9gcMWDMg==

EAS Grant - Application AKcxxypA4qMkMX9gcMWDMg==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 02/05/2004 Application Dated: 05/06/2003

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHA700C-SMC45-1
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	PCS Licensed Transmitter held to ear
Notes:	Notepad Computer with 3 Radio Lans
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	24E	1850.2  -  1909.8	0.891	0.03  PM	300KGXW

Radiated power is .891 W EIRP. This transmitter operates only in the grantee's Model 700C. Colocated transmitter operating configurations with optional WLAN FCC ID: HN22011B-2 and optional Bluetooth FCC ID: HN2ABTM3-3 have been evaluated as described in this filing. Other colocation configurations require separate evaluation. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 WLAN body-worn 0.15 W/kg Part 24 Head: 0.65 W/kg; Body-worn: 0.57 W/kg.

TCB Grant - Application 7k/pwj9K0XCADAD/Sgg7+Q==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124

Date of Grant: 12/29/2004 Application Dated: 12/29/2004

Intermec Technologies Corporation

9680 Old Bailes Rd.

Fort Mill, SC 29707

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHA700C-SMC45-1
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	PCS Licensed Transmitter held to ear
Notes:	SMC45 in 700C

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	24E	1850.2  -  1909.8	0.891	0.03  PM	300KGXW

Radiated power is .891 W EIRP. This transmitter operates only in the grantees Model 700C. Co-located transmitter operating configurations with optional WLAN FCC ID: HN22011B-2 and optional Bluetooth FCC ID: (HN2ABTM3-3 or FCC ID: EHABTS080) have been evaluated as described in this filing. This transmitter may also be co-located with Intermec’s Bluetooth-enabled printers, Model 6820 or Model PW40, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When configured with the IP3, the 6820, or the PW40, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. Other co-location configurations require separate evaluation. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 WLAN body-worn 0.15 W/kg Part 24 Head: 0.65 W/kg; Body-worn: 0.57 W/kg.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 12/29/2004 Application Dated: 12/29/2004

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHA700C-SMC45-1
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	PCS Licensed Transmitter held to ear
Notes:	SMC45 in 700C
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	24E	1850.2  -  1909.8	0.891	0.03  PM	300KGXW

Radiated power is .891 W EIRP. This transmitter operates only in the grantees Model 700C. Co-located transmitter operating configurations with optional WLAN FCC ID: HN22011B-2 and optional Bluetooth FCC ID: (HN2ABTM3-3 or FCC ID: EHABTS080) have been evaluated as described in this filing. This transmitter may also be co-located with Intermec’s Bluetooth-enabled printers, Model 6820 or Model PW40, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When configured with the IP3, the 6820, or the PW40, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. Other co-location configurations require separate evaluation. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 WLAN body-worn 0.15 W/kg Part 24 Head: 0.65 W/kg; Body-worn: 0.57 W/kg.

TCB Grant - Application 50begQFxUZ5YkWs1X4tIKw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124

Date of Grant: 03/04/2004 Application Dated: 03/04/2004

Intermec Technologies Corporation

9680 Old Bailes Rd.

Fort Mill, SC 29707

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHA700C-SMC45-1
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	PCS Licensed Transmitter held to ear
Notes:	GPRS portable to allow co-location with IP3

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	24E	1850.2  -  1909.8	0.891	0.03  PM	300KGXW

Radiated power is .891 W EIRP. This transmitter operates only in the grantees Model 700C. Co-located transmitter operating configurations with optional WLAN FCC ID: HN22011B-2 and optional Bluetooth FCC ID: HN2ABTM3-3 have been evaluated as described in this filing. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When configured with the IP3, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. Other co-location configurations require separate evaluation. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 WLAN body-worn 0.15 W/kg Part 24 Head: 0.65 W/kg; Body-worn: 0.57 W/kg.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 03/04/2004 Application Dated: 03/04/2004

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHA700C-SMC45-1
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	PCS Licensed Transmitter held to ear
Notes:	GPRS portable to allow co-location with IP3
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	24E	1850.2  -  1909.8	0.891	0.03  PM	300KGXW

Radiated power is .891 W EIRP. This transmitter operates only in the grantees Model 700C. Co-located transmitter operating configurations with optional WLAN FCC ID: HN22011B-2 and optional Bluetooth FCC ID: HN2ABTM3-3 have been evaluated as described in this filing. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When configured with the IP3, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. Other co-location configurations require separate evaluation. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 WLAN body-worn 0.15 W/kg Part 24 Head: 0.65 W/kg; Body-worn: 0.57 W/kg.

Mail To: