FCC ID EHADRCB

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124

Date of Grant: 09/21/2006 Application Dated: 09/21/2006

Intermec Technologies Corporation

9680 Old Bailes Rd.

Fort Mill, SC 29707

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHADRCB
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	DRCB
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.078

Output power is conducted. Limited Modular Approval for installation and operation in the grantees handheld/inventory terminals and mobile computers. Optional collocated transmitter operating configuration with FCC IDs EHABTM210, EHAMC75, EHABTS080 have been evaluated as described in previous filings under this FCC ID. This filing under this FCC ID evaluated collocation for operation in a mobile RF exposure condition with FCC ID: HN2-BTM311 in the grantees mobile computer (Model CV30). Other collocation configurations require separate evaluation. For mobile operating configurations, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. SAR was evaluated in held-to-ear, held-to-face, and body-worn beltclip configurations. Body-worn operations are restricted to the specific belt-clips / holsters / accessories tested as described in previous filings under this FCC ID. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for Part 15 single and co-transmitting configurations under this FCC ID are: head: 0.13 W/kg; body-worn: 0.29 W/kg.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 09/21/2006 Application Dated: 09/21/2006

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHADRCB
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	DRCB
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.078

Output power is conducted. Limited Modular Approval for installation and operation in the grantees handheld/inventory terminals and mobile computers. Optional collocated transmitter operating configuration with FCC IDs EHABTM210, EHAMC75, EHABTS080 have been evaluated as described in previous filings under this FCC ID. This filing under this FCC ID evaluated collocation for operation in a mobile RF exposure condition with FCC ID: HN2-BTM311 in the grantees mobile computer (Model CV30). Other collocation configurations require separate evaluation. For mobile operating configurations, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. SAR was evaluated in held-to-ear, held-to-face, and body-worn beltclip configurations. Body-worn operations are restricted to the specific belt-clips / holsters / accessories tested as described in previous filings under this FCC ID. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for Part 15 single and co-transmitting configurations under this FCC ID are: head: 0.13 W/kg; body-worn: 0.29 W/kg.

TCB Grant - Application rnl1Jijt2io1PYscMFxp5A==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124

Date of Grant: 01/22/2008 Application Dated: 01/22/2008

Intermec Technologies Corporation

9680 Old Bailes Rd.

Fort Mill, SC 29707

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHADRCB
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	DRCB
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.078

Output power is conducted. Limited Modular Approval for installation and operation in the grantees handheld/inventory terminals and mobile computers. Optional collocated transmitter operating configuration with FCC IDs EHABTM210, EHAMC75, EHABTS080, EHAEM3420; HN2-BTM311, EHABTS080-1, EHARFID915PCC-6, EHAIM4 have been evaluated as described in filings under this FCC ID. Other collocation configurations require separate evaluation. For mobile operating configurations, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. SAR was evaluated for certain held-to-ear, held-to-face, and body-worn beltclip configurations. Body-worn operations are restricted to the specific belt-clips / holsters / accessories tested as described in filings under this FCC ID. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for Part 15 single and co-transmitting configurations under this FCC ID are: head: 0.39 W/kg; body-worn: 0.78 W/kg.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 01/22/2008 Application Dated: 01/22/2008

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHADRCB
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	DRCB
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.078

Output power is conducted. Limited Modular Approval for installation and operation in the grantees handheld/inventory terminals and mobile computers. Optional collocated transmitter operating configuration with FCC IDs EHABTM210, EHAMC75, EHABTS080, EHAEM3420; HN2-BTM311, EHABTS080-1, EHARFID915PCC-6, EHAIM4 have been evaluated as described in filings under this FCC ID. Other collocation configurations require separate evaluation. For mobile operating configurations, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. SAR was evaluated for certain held-to-ear, held-to-face, and body-worn beltclip configurations. Body-worn operations are restricted to the specific belt-clips / holsters / accessories tested as described in filings under this FCC ID. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for Part 15 single and co-transmitting configurations under this FCC ID are: head: 0.39 W/kg; body-worn: 0.78 W/kg.

TCB Grant - Application qqc8dw7t8+H8TG/nAs3ONA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124

Date of Grant: 10/01/2006 Application Dated: 10/01/2006

Intermec Technologies Corporation

9680 Old Bailes Rd.

Fort Mill, SC 29707

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHADRCB
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	DRCB
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.078

Output power is conducted. Limited Modular Approval for installation and operation in the grantees handheld/inventory terminals and mobile computers. Optional collocated transmitter operating configuration with FCC IDs EHABTM210, EHAMC75, EHABTS080 have been evaluated as described in previous filings under this FCC ID. A previous filing under this FCC ID evaluated collocation for operation in a mobile RF exposure condition with FCC ID: HN2-BTM311 in the grantees mobile computer (Model CV30). This filing under this FCC ID evaluated mobile co-location with FCC ID’s: EHABTS080-1, EHARFID915PCC-6, and EHAIM4. Other collocation configurations require separate evaluation. For mobile operating configurations, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. SAR was evaluated in held-to-ear, held-to-face, and body-worn beltclip configurations. Body-worn operations are restricted to the specific belt-clips / holsters / accessories tested as described in previous filings under this FCC ID. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for Part 15 single and co-transmitting configurations under this FCC ID are: head: 0.13 W/kg; body-worn: 0.29 W/kg.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 10/01/2006 Application Dated: 10/01/2006

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHADRCB
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	DRCB
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.078

Output power is conducted. Limited Modular Approval for installation and operation in the grantees handheld/inventory terminals and mobile computers. Optional collocated transmitter operating configuration with FCC IDs EHABTM210, EHAMC75, EHABTS080 have been evaluated as described in previous filings under this FCC ID. A previous filing under this FCC ID evaluated collocation for operation in a mobile RF exposure condition with FCC ID: HN2-BTM311 in the grantees mobile computer (Model CV30). This filing under this FCC ID evaluated mobile co-location with FCC ID’s: EHABTS080-1, EHARFID915PCC-6, and EHAIM4. Other collocation configurations require separate evaluation. For mobile operating configurations, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. SAR was evaluated in held-to-ear, held-to-face, and body-worn beltclip configurations. Body-worn operations are restricted to the specific belt-clips / holsters / accessories tested as described in previous filings under this FCC ID. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for Part 15 single and co-transmitting configurations under this FCC ID are: head: 0.13 W/kg; body-worn: 0.29 W/kg.

TCB Grant - Application P8z4lS2XezqeJpU3iv1evA==

EAS Grant - Application P8z4lS2XezqeJpU3iv1evA==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 07/13/2007 Application Dated: 06/15/2007

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHADRCB
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	DRCB
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.078

Output power is conducted. Limited Modular Approval for installation and operation in the grantees handheld/inventory terminals and mobile computers. Optional collocated transmitter operating configuration with FCC IDs EHABTM210, EHAMC75, EHABTS080, EHAEM3420; HN2-BTM311, EHABTS080-1, EHARFID915PCC-6, EHAIM4 have been evaluated as described in filings under this FCC ID. Other collocation configurations require separate evaluation. For mobile operating configurations, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. SAR was evaluated for certain held-to-ear, held-to-face, and body-worn beltclip configurations. Body-worn operations are restricted to the specific belt-clips / holsters / accessories tested as described in filings under this FCC ID. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for Part 15 single and co-transmitting configurations under this FCC ID are: head: 0.39 W/kg; body-worn: 0.78 W/kg.

TCB Grant - Application OoH4R6s/Ip88V/tEEFjZqA==

EAS Grant - Application OoH4R6s/Ip88V/tEEFjZqA==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 12/22/2006 Application Dated: 10/11/2006

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHADRCB
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	DRCB
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.078

Output power is conducted. Limited Modular Approval for installation and operation in the grantees handheld/inventory terminals and mobile computers. Optional collocated transmitter operating configuration with FCC IDs EHABTM210, EHAMC75, EHABTS080, EHAEM3420; HN2-BTM311, (mobile-Model CV30); EHABTS080-1, EHARFID915PCC-6, EHAIM4 (mobile). have been evaluated as described in filings under this FCC ID. Other collocation configurations require separate evaluation. For mobile operating configurations, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. SAR was evaluated in held-to-ear, held-to-face, and body-worn beltclip configurations. Body-worn operations are restricted to the specific belt-clips / holsters / accessories tested as described in previous filings under this FCC ID. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for Part 15 single and co-transmitting configurations under this FCC ID are: head: 0.39 W/kg; body-worn: 0.78 W/kg.

TCB Grant - Application E4/Lv3PhkDn+/1lbT7xoGQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124

Date of Grant: 05/02/2006 Application Dated: 05/02/2006

Intermec Technologies Corporation

9680 Old Bailes Rd.

Fort Mill, SC 29707

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHADRCB
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	DRCB
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.078

Output power is conducted. Limited Modular Approval for installation and operation only in the grantees Model CN2B and Model 730 handheld devices. Collocated transmitter operating configuration with optional FCC ID: EHABTM210 has been evaluated as described in this filing. Other collocation configurations require separate evaluation. SAR was evaluated in held-to-face and body-worn beltclip configurations. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 Head: 0.04 W/kg; Body-worn: 0.29 W/kg.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 05/02/2006 Application Dated: 05/02/2006

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHADRCB
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	DRCB
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.078

Output power is conducted. Limited Modular Approval for installation and operation only in the grantees Model CN2B and Model 730 handheld devices. Collocated transmitter operating configuration with optional FCC ID: EHABTM210 has been evaluated as described in this filing. Other collocation configurations require separate evaluation. SAR was evaluated in held-to-face and body-worn beltclip configurations. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 Head: 0.04 W/kg; Body-worn: 0.29 W/kg.

TCB Grant - Application bkKhbTJpl1LDuhOiozx4+w==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124

Date of Grant: 11/10/2011 Application Dated: 11/10/2011

Intermec Technologies Corporation

9680 Old Bailes Rd.

Fort Mill, SC 29707

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHADRCB
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	DRCB
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.078

Output power is conducted. Limited Modular Approval for installation and operation in the grantees handheld/inventory terminals and mobile computers. Optional collocated transmitter operating configuration with FCC IDs EHABTM210, EHAMC75, EHABTS080, EHAEM3420; HN2-BTM311, EHABTS080-1, EHARFID915PCC-6, EHAIM4, EHA-BTM312 have been evaluated as described in filings under this FCC ID. Other collocation configurations require separate evaluation. For mobile operating configurations, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in filings under this FCC ID. SAR was evaluated for certain held-to-ear, held-to-face, and body-worn beltclip configurations. Body-worn operations are restricted to the specific belt-clips / holsters / accessories tested as described in filings under this FCC ID. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for Part 15 single and co-transmitting configurations under this FCC ID are: head: 0.39 W/kg; body-worn: 0.78 W/kg.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 11/10/2011 Application Dated: 11/10/2011

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHADRCB
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	DRCB
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.078

Output power is conducted. Limited Modular Approval for installation and operation in the grantees handheld/inventory terminals and mobile computers. Optional collocated transmitter operating configuration with FCC IDs EHABTM210, EHAMC75, EHABTS080, EHAEM3420; HN2-BTM311, EHABTS080-1, EHARFID915PCC-6, EHAIM4, EHA-BTM312 have been evaluated as described in filings under this FCC ID. Other collocation configurations require separate evaluation. For mobile operating configurations, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in filings under this FCC ID. SAR was evaluated for certain held-to-ear, held-to-face, and body-worn beltclip configurations. Body-worn operations are restricted to the specific belt-clips / holsters / accessories tested as described in filings under this FCC ID. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for Part 15 single and co-transmitting configurations under this FCC ID are: head: 0.39 W/kg; body-worn: 0.78 W/kg.

TCB Grant - Application bc8ESfEv009FHUWjXs1Nmw==

EAS Grant - Application bc8ESfEv009FHUWjXs1Nmw==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 09/12/2006 Application Dated: 06/27/2006

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHADRCB
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	DRCB
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.078

Output power is conducted. Limited Modular Approval for installation and operation only in the grantees handheld/inventory terminals. Optional collocated transmitter operating configuration with FCC IDs EHABTM210, EHAMC75, EHABTS080 have been evaluated as described in filings under this FCC ID; other collocation configurations require separate evaluation. SAR was evaluated in held-to-ear, held-to-face, and body-worn beltclip configurations. Body-worn operations are restricted to the specific belt-clips / holsters / accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for Part 15 single and co-transmitting configurations under this FCC ID are: head: 0.13 W/kg; body-worn: 0.29 W/kg.

TCB Grant - Application 9HMzD8yQCOEeHiv93IAssA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124

Date of Grant: 09/19/2007 Application Dated: 09/19/2007

Intermec Technologies Corporation

9680 Old Bailes Rd.

Fort Mill, SC 29707

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHADRCB
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	DRCB
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.078

Output power is conducted. Limited Modular Approval for installation and operation in the grantees handheld/inventory terminals and mobile computers. Optional collocated transmitter operating configuration with FCC IDs EHABTM210, EHAMC75, EHABTS080, EHAEM3420; HN2-BTM311, EHABTS080-1, EHARFID915PCC-6, EHAIM4 have been evaluated as described in filings under this FCC ID. Other collocation configurations require separate evaluation. For mobile operating configurations, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. SAR was evaluated for certain held-to-ear, held-to-face, and body-worn beltclip configurations. Body-worn operations are restricted to the specific belt-clips / holsters / accessories tested as described in filings under this FCC ID. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for Part 15 single and co-transmitting configurations under this FCC ID are: head: 0.39 W/kg; body-worn: 0.78 W/kg.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 09/19/2007 Application Dated: 09/19/2007

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHADRCB
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	DRCB
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.078

Output power is conducted. Limited Modular Approval for installation and operation in the grantees handheld/inventory terminals and mobile computers. Optional collocated transmitter operating configuration with FCC IDs EHABTM210, EHAMC75, EHABTS080, EHAEM3420; HN2-BTM311, EHABTS080-1, EHARFID915PCC-6, EHAIM4 have been evaluated as described in filings under this FCC ID. Other collocation configurations require separate evaluation. For mobile operating configurations, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. SAR was evaluated for certain held-to-ear, held-to-face, and body-worn beltclip configurations. Body-worn operations are restricted to the specific belt-clips / holsters / accessories tested as described in filings under this FCC ID. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for Part 15 single and co-transmitting configurations under this FCC ID are: head: 0.39 W/kg; body-worn: 0.78 W/kg.

Mail To:

EA821242

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124

Date of Grant: 03/20/2006 Application Dated: 03/20/2006

Intermec Technologies Corporation

9680 Old Bailes Rd.

Fort Mill, SC 29707

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHADRCB
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	DRCB
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.078

Output power is conducted. Limited Modular Approval for installation and operation only in the grantees Model CN2B handheld device. Collocated transmitter operating configuration with optional FCC ID: EHABTM210 has been evaluated as described in this filing. Other collocation configurations require separate evaluation. SAR was evaluated in held-to-face and body-worn beltclip configurations. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 Head: 0.04 W/kg; Body-worn: 0.29 W/kg

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 03/20/2006 Application Dated: 03/20/2006

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EHADRCB
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	DRCB
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.078

Output power is conducted. Limited Modular Approval for installation and operation only in the grantees Model CN2B handheld device. Collocated transmitter operating configuration with optional FCC ID: EHABTM210 has been evaluated as described in this filing. Other collocation configurations require separate evaluation. SAR was evaluated in held-to-face and body-worn beltclip configurations. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 Head: 0.04 W/kg; Body-worn: 0.29 W/kg

Mail To: