FCC ID EHAIM4
EHA-IM4, EHA IM4, EHAIM4, EHA1M4
Intermec Technologies Corporation IM4 IM4
An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product.
For example, the grantee code for FCC ID: EHAIM4 is EHA. The remaining characters of the FCC ID, IM4, are often associated with the product model, but they can be random. These letters are chosen by the applicant.
In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.
Purchase on Amazon:
IM4
- Application: IM4
- Equipment Class: DTS - Digital Transmission System
- Short Link: fcc.id/EHAIM4
- Sources: FCC.gov | FCC.report
- Registered By: Intermec Technologies Corporation - EHA (United States)
| App # | Purpose | Date | Unique ID |
|---|---|---|---|
| 1 | Original Equipment | 2005-10-24 | IclOM30mJQHUdqp5hHqBWw== |
| 2 | Class II Permissive Change | 2006-10-01 | ifv7Uge5FFrEjfGI8ndNRw== |
| 3 | Class II Permissive Change | 2008-03-12 | YOm+tNcRCOuCew+8YAPLxw== |
| 4 | Class II Permissive Change | 2008-10-27 | eGq/sGIC0NM09dJ+NIU26Q== |
| 5 | Class II Permissive Change | 2009-02-17 | RQUwzcp53LpcKQ282mNgdQ== |
| 6 | Class II Permissive Change | 2010-07-14 | 3mzJApRDthXaYH7SqbkhQg== |
| 7 | Class II Permissive Change | 2012-04-18 | nfycznnbAGPHnLxOOcbvvA== |
| 8 | Class II Permissive Change | 2012-10-30 | sCt7FEWaJLdqTnd7EzkJHQ== |
Operating Frequencies
| Frequency Range | Power Output | Rule Parts | App # |
|---|---|---|---|
| 902.75-927.25 MHz | 860.99 mW | 15C | 6.1 |
| 902.75-927.25 MHz | 860.99 mW | 15C | 4.1 |
| 902.75-927.25 MHz | 860.99 mW | 15C | 1.1 |
| 902.75-927.25 MHz | 860.99 mW | 15C | 2.1 |
| 902.75-927.25 MHz | 860.99 mW | 15C | 7.1 |
| 902.75-927.25 MHz | 860.99 mW | 15C | 5.1 |
| 902.75-927.25 MHz | 860.99 mW | 15C | 8.1 |
| 902.75-927.25 MHz | 860.99 mW | 15C | 3.1 |
Exhibits
Available Exhibits
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 8 | User Manual | Users Manual Adobe Acrobat PDF (3902 kB) |
2012-10-30 2012-10-30 |
| 8 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (640 kB) |
2012-10-30 2012-10-30 |
| 8 | External Photos | External Photos Adobe Acrobat PDF (2470 kB) |
2012-10-30 2012-10-30 |
| 8 | Cover letter | Cover Letter(s) Adobe Acrobat PDF (46 kB) |
2012-10-30 2012-10-30 |
| 8 | Compliance Opinion | Cover Letter(s) Adobe Acrobat PDF (21 kB) |
2012-10-30 2012-10-30 |
| 8 | Compliance Insert | Users Manual Adobe Acrobat PDF (2284 kB) |
2012-10-30 2012-10-30 |
| 7 | User Manual | Users Manual Adobe Acrobat PDF (510 kB) |
2012-04-18 2012-04-18 |
| 7 | RF Exposure 4 | RF Exposure Info Adobe Acrobat PDF (102 kB) |
2012-04-18 2012-04-18 |
| 7 | RF Exposure 3 | RF Exposure Info Adobe Acrobat PDF (106 kB) |
2012-04-18 2012-04-18 |
| 7 | RF Exposure 2 | RF Exposure Info Adobe Acrobat PDF (108 kB) |
2012-04-18 2012-04-18 |
| 7 | RF Exposure 1 | RF Exposure Info Adobe Acrobat PDF (95 kB) |
2012-04-18 2012-04-18 |
| 7 | External Photos 2 | External Photos Adobe Acrobat PDF (941 kB) |
2012-04-18 2012-04-18 |
| 7 | External Photos 1 | External Photos Adobe Acrobat PDF (586 kB) |
2012-04-18 2012-04-18 |
| 7 | Cover letter | Cover Letter(s) Adobe Acrobat PDF (81 kB) |
2012-04-18 2012-04-18 |
| 7 | Compliance Opinion | Cover Letter(s) Adobe Acrobat PDF (15 kB) |
2012-04-18 2012-04-18 |
| 6 | RF Exposure IP30 CN4 GSM | RF Exposure Info Adobe Acrobat PDF (372 kB) |
2010-07-14 2010-07-14 |
| 6 | RF Exposure IP30 CN4 CDMA | RF Exposure Info Adobe Acrobat PDF (371 kB) |
2010-07-14 2010-07-14 |
| 6 | User Guide | Users Manual Adobe Acrobat PDF (2938 kB) |
2010-07-14 2010-07-14 |
| 6 | User Manual | Users Manual Adobe Acrobat PDF (1242 kB) |
2010-07-14 2010-07-14 |
| 6 | Cover letter | Cover Letter(s) Adobe Acrobat PDF (35 kB) |
2010-07-14 2010-07-14 |
| 6 | Compliance Opinion | Cover Letter(s) Adobe Acrobat PDF (16 kB) |
2010-07-14 2010-07-14 |
| 5 | Compliance Opinion | Cover Letter(s) Adobe Acrobat PDF (15 kB) |
2009-02-17 2009-02-17 |
| 5 | MPE Estimates | RF Exposure Info Adobe Acrobat PDF (912 kB) |
2009-02-17 2009-02-17 |
| 5 | User Manual | Users Manual Adobe Acrobat PDF (1905 kB) |
2009-02-17 2009-02-17 |
| 5 | Cover letter | Cover Letter(s) Adobe Acrobat PDF (33 kB) |
2009-02-17 2009-02-17 |
| 5 | External Photos | External Photos Adobe Acrobat PDF (887 kB) |
2009-02-17 2009-02-17 |
| 5 | Agent Authorization | Cover Letter(s) Adobe Acrobat PDF (89 kB) |
2009-02-17 2009-02-17 |
| 4 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (907 kB) |
2008-10-27 2008-10-27 |
| 4 | User Manual | Users Manual Adobe Acrobat PDF (1905 kB) |
2008-10-27 2008-10-27 |
| 4 | Cover letter | Cover Letter(s) Adobe Acrobat PDF (33 kB) |
2008-10-27 2008-10-27 |
| 4 | External Photos | External Photos Adobe Acrobat PDF (887 kB) |
2008-10-27 2008-10-27 |
| 4 | Compliance Opinion | Cover Letter(s) Adobe Acrobat PDF (15 kB) |
2008-10-27 2008-10-27 |
| 4 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (89 kB) |
2008-10-27 2008-10-27 |
| 3 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (170 kB) |
2008-03-12 2008-03-12 |
| 3 | Technical Report | Test Report Adobe Acrobat PDF (487 kB) |
2008-03-12 2008-03-12 |
| 3 | MPE Estimates CN3 EHA06CN3 with IP30 | RF Exposure Info Adobe Acrobat PDF (12 kB) |
2008-03-12 2008-03-12 |
| 3 | MPE Estimates CN3 eha01CN3 with IP30 | RF Exposure Info Adobe Acrobat PDF (12 kB) |
2008-03-12 2008-03-12 |
| 3 | MPE Estimates CK61 with IP30 | RF Exposure Info Adobe Acrobat PDF (11 kB) |
2008-03-12 2008-03-12 |
| 3 | USer Manual | Users Manual Adobe Acrobat PDF (804 kB) |
2008-03-12 2008-03-12 |
| 3 | Compliance Insert | Users Manual Adobe Acrobat PDF (1019 kB) |
2008-03-12 2008-03-12 |
| 3 | Antenna Info | Operational Description Adobe Acrobat PDF (206 kB) |
2008-03-12 2008-03-12 |
| 3 | Cover letter | Cover Letter(s) Adobe Acrobat PDF (111 kB) |
2008-03-12 2008-03-12 |
| 3 | External PHotos CN3 | External Photos Adobe Acrobat PDF (1378 kB) |
2008-03-12 2008-03-12 |
| 3 | External Photos CK61 | External Photos Adobe Acrobat PDF (1598 kB) |
2008-03-12 2008-03-12 |
| 3 | Compliance Opinion | Cover Letter(s) Adobe Acrobat PDF (15 kB) |
2008-03-12 2008-03-12 |
| 2 | MPE Estimates | RF Exposure Info Adobe Acrobat PDF (31 kB) |
2006-10-01 2006-10-01 |
| 2 | External Photos 4 | External Photos Adobe Acrobat PDF (86 kB) |
2006-10-01 2006-10-01 |
| 2 | External Photos 3 | External Photos Adobe Acrobat PDF (109 kB) |
2006-10-01 2006-10-01 |
| 2 | External Photos 2 | External Photos Adobe Acrobat PDF (64 kB) |
2006-10-01 2006-10-01 |
| 2 | External Photos 1 | External Photos Adobe Acrobat PDF (174 kB) |
2006-10-01 2006-10-01 |
| 2 | Compliance Opinion | Cover Letter(s) Adobe Acrobat PDF (18 kB) |
2006-10-01 2006-10-01 |
| 2 | Cover letter | Cover Letter(s) Adobe Acrobat PDF (9 kB) |
2006-10-01 2006-10-01 |
| 1 | Users Manual | Users Manual Adobe Acrobat PDF (475 kB) |
2005-10-24 2005-10-24 |
| 1 | Users Manual supplement | Users Manual Adobe Acrobat PDF (198 kB) |
2005-10-24 2005-10-24 |
| 1 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (1496 kB) |
2005-10-24 2005-10-24 |
| 1 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (24 kB) |
2005-10-24 2005-10-24 |
| 1 | Request for confidentiality | Cover Letter(s) Adobe Acrobat PDF (53 kB) |
2005-10-24 2005-10-24 |
| 1 | Technical Report | Test Report Adobe Acrobat PDF (2370 kB) |
2005-10-24 2005-10-24 |
| 1 | OEM Integration Guide | Users Manual Adobe Acrobat PDF (166 kB) |
2005-10-24 2005-10-24 |
| 1 | Modular Approval Requirements Letter | Cover Letter(s) Adobe Acrobat PDF (10 kB) |
2005-10-24 2005-10-24 |
| 1 | Internal Photos | Internal Photos Adobe Acrobat PDF (361 kB) |
2005-10-24 2005-10-24 |
| 1 | FCC ID Label | ID Label/Location Info Adobe Acrobat PDF (1430 kB) |
2005-10-24 2005-10-24 |
| 1 | External Photos | External Photos Adobe Acrobat PDF (361 kB) |
2005-10-24 2005-10-24 |
| 1 | Cover Letter | Cover Letter(s) Adobe Acrobat PDF (7 kB) |
2005-10-24 2005-10-24 |
| 1 | Antenna Info 4 | Operational Description Adobe Acrobat PDF (59 kB) |
2005-10-24 2005-10-24 |
| 1 | Antenna Info 3 | Operational Description Adobe Acrobat PDF (71 kB) |
2005-10-24 2005-10-24 |
| 1 | Antenna Info 2 | Operational Description Adobe Acrobat PDF (53 kB) |
2005-10-24 2005-10-24 |
| 1 | Antenna Info 1 | Operational Description Adobe Acrobat PDF (23 kB) |
2005-10-24 2005-10-24 |
| 1 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (47 kB) |
2005-10-24 2005-10-24 |
APP # 8 (2012-10-30)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 8 | User Manual | Users Manual Adobe Acrobat PDF (3902 kB) |
2012-10-30 00:00:00 2012-10-30 00:00:00 |
| 8 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (640 kB) |
2012-10-30 00:00:00 2012-10-30 00:00:00 |
| 8 | External Photos | External Photos Adobe Acrobat PDF (2470 kB) |
2012-10-30 00:00:00 2012-10-30 00:00:00 |
| 8 | Cover letter | Cover Letter(s) Adobe Acrobat PDF (46 kB) |
2012-10-30 00:00:00 2012-10-30 00:00:00 |
| 8 | Compliance Opinion | Cover Letter(s) Adobe Acrobat PDF (21 kB) |
2012-10-30 00:00:00 2012-10-30 00:00:00 |
| 8 | Compliance Insert | Users Manual Adobe Acrobat PDF (2284 kB) |
2012-10-30 00:00:00 2012-10-30 00:00:00 |
APP # 7 (2012-04-18)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 7 | User Manual | Users Manual Adobe Acrobat PDF (510 kB) |
2012-04-18 00:00:00 2012-04-18 00:00:00 |
| 7 | RF Exposure 4 | RF Exposure Info Adobe Acrobat PDF (102 kB) |
2012-04-18 00:00:00 2012-04-18 00:00:00 |
| 7 | RF Exposure 3 | RF Exposure Info Adobe Acrobat PDF (106 kB) |
2012-04-18 00:00:00 2012-04-18 00:00:00 |
| 7 | RF Exposure 2 | RF Exposure Info Adobe Acrobat PDF (108 kB) |
2012-04-18 00:00:00 2012-04-18 00:00:00 |
| 7 | RF Exposure 1 | RF Exposure Info Adobe Acrobat PDF (95 kB) |
2012-04-18 00:00:00 2012-04-18 00:00:00 |
| 7 | External Photos 2 | External Photos Adobe Acrobat PDF (941 kB) |
2012-04-18 00:00:00 2012-04-18 00:00:00 |
| 7 | External Photos 1 | External Photos Adobe Acrobat PDF (586 kB) |
2012-04-18 00:00:00 2012-04-18 00:00:00 |
| 7 | Cover letter | Cover Letter(s) Adobe Acrobat PDF (81 kB) |
2012-04-18 00:00:00 2012-04-18 00:00:00 |
| 7 | Compliance Opinion | Cover Letter(s) Adobe Acrobat PDF (15 kB) |
2012-04-18 00:00:00 2012-04-18 00:00:00 |
APP # 6 (2010-07-14)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 6 | RF Exposure IP30 CN4 GSM | RF Exposure Info Adobe Acrobat PDF (372 kB) |
2010-07-14 00:00:00 2010-07-14 00:00:00 |
| 6 | RF Exposure IP30 CN4 CDMA | RF Exposure Info Adobe Acrobat PDF (371 kB) |
2010-07-14 00:00:00 2010-07-14 00:00:00 |
| 6 | User Guide | Users Manual Adobe Acrobat PDF (2938 kB) |
2010-07-14 00:00:00 2010-07-14 00:00:00 |
| 6 | User Manual | Users Manual Adobe Acrobat PDF (1242 kB) |
2010-07-14 00:00:00 2010-07-14 00:00:00 |
| 6 | Cover letter | Cover Letter(s) Adobe Acrobat PDF (35 kB) |
2010-07-14 00:00:00 2010-07-14 00:00:00 |
| 6 | Compliance Opinion | Cover Letter(s) Adobe Acrobat PDF (16 kB) |
2010-07-14 00:00:00 2010-07-14 00:00:00 |
APP # 5 (2009-02-17)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 5 | Compliance Opinion | Cover Letter(s) Adobe Acrobat PDF (15 kB) |
2009-02-17 00:00:00 2009-02-17 00:00:00 |
| 5 | MPE Estimates | RF Exposure Info Adobe Acrobat PDF (912 kB) |
2009-02-17 00:00:00 2009-02-17 00:00:00 |
| 5 | User Manual | Users Manual Adobe Acrobat PDF (1905 kB) |
2009-02-17 00:00:00 2009-02-17 00:00:00 |
| 5 | Cover letter | Cover Letter(s) Adobe Acrobat PDF (33 kB) |
2009-02-17 00:00:00 2009-02-17 00:00:00 |
| 5 | External Photos | External Photos Adobe Acrobat PDF (887 kB) |
2009-02-17 00:00:00 2009-02-17 00:00:00 |
| 5 | Agent Authorization | Cover Letter(s) Adobe Acrobat PDF (89 kB) |
2009-02-17 00:00:00 2009-02-17 00:00:00 |
APP # 4 (2008-10-27)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 4 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (907 kB) |
2008-10-27 00:00:00 2008-10-27 00:00:00 |
| 4 | User Manual | Users Manual Adobe Acrobat PDF (1905 kB) |
2008-10-27 00:00:00 2008-10-27 00:00:00 |
| 4 | Cover letter | Cover Letter(s) Adobe Acrobat PDF (33 kB) |
2008-10-27 00:00:00 2008-10-27 00:00:00 |
| 4 | External Photos | External Photos Adobe Acrobat PDF (887 kB) |
2008-10-27 00:00:00 2008-10-27 00:00:00 |
| 4 | Compliance Opinion | Cover Letter(s) Adobe Acrobat PDF (15 kB) |
2008-10-27 00:00:00 2008-10-27 00:00:00 |
| 4 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (89 kB) |
2008-10-27 00:00:00 2008-10-27 00:00:00 |
APP # 3 (2008-03-12)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (170 kB) |
2008-03-12 00:00:00 2008-03-12 00:00:00 |
| 3 | Technical Report | Test Report Adobe Acrobat PDF (487 kB) |
2008-03-12 00:00:00 2008-03-12 00:00:00 |
| 3 | MPE Estimates CN3 EHA06CN3 with IP30 | RF Exposure Info Adobe Acrobat PDF (12 kB) |
2008-03-12 00:00:00 2008-03-12 00:00:00 |
| 3 | MPE Estimates CN3 eha01CN3 with IP30 | RF Exposure Info Adobe Acrobat PDF (12 kB) |
2008-03-12 00:00:00 2008-03-12 00:00:00 |
| 3 | MPE Estimates CK61 with IP30 | RF Exposure Info Adobe Acrobat PDF (11 kB) |
2008-03-12 00:00:00 2008-03-12 00:00:00 |
| 3 | USer Manual | Users Manual Adobe Acrobat PDF (804 kB) |
2008-03-12 00:00:00 2008-03-12 00:00:00 |
| 3 | Compliance Insert | Users Manual Adobe Acrobat PDF (1019 kB) |
2008-03-12 00:00:00 2008-03-12 00:00:00 |
| 3 | Antenna Info | Operational Description Adobe Acrobat PDF (206 kB) |
2008-03-12 00:00:00 2008-03-12 00:00:00 |
| 3 | Cover letter | Cover Letter(s) Adobe Acrobat PDF (111 kB) |
2008-03-12 00:00:00 2008-03-12 00:00:00 |
| 3 | External PHotos CN3 | External Photos Adobe Acrobat PDF (1378 kB) |
2008-03-12 00:00:00 2008-03-12 00:00:00 |
| 3 | External Photos CK61 | External Photos Adobe Acrobat PDF (1598 kB) |
2008-03-12 00:00:00 2008-03-12 00:00:00 |
| 3 | Compliance Opinion | Cover Letter(s) Adobe Acrobat PDF (15 kB) |
2008-03-12 00:00:00 2008-03-12 00:00:00 |
APP # 2 (2006-10-01)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | MPE Estimates | RF Exposure Info Adobe Acrobat PDF (31 kB) |
2006-10-01 00:00:00 2006-10-01 00:00:00 |
| 2 | External Photos 4 | External Photos Adobe Acrobat PDF (86 kB) |
2006-10-01 00:00:00 2006-10-01 00:00:00 |
| 2 | External Photos 3 | External Photos Adobe Acrobat PDF (109 kB) |
2006-10-01 00:00:00 2006-10-01 00:00:00 |
| 2 | External Photos 2 | External Photos Adobe Acrobat PDF (64 kB) |
2006-10-01 00:00:00 2006-10-01 00:00:00 |
| 2 | External Photos 1 | External Photos Adobe Acrobat PDF (174 kB) |
2006-10-01 00:00:00 2006-10-01 00:00:00 |
| 2 | Compliance Opinion | Cover Letter(s) Adobe Acrobat PDF (18 kB) |
2006-10-01 00:00:00 2006-10-01 00:00:00 |
| 2 | Cover letter | Cover Letter(s) Adobe Acrobat PDF (9 kB) |
2006-10-01 00:00:00 2006-10-01 00:00:00 |
APP # 1 (2005-10-24)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Users Manual | Users Manual Adobe Acrobat PDF (475 kB) |
2005-10-24 00:00:00 2005-10-24 00:00:00 |
| 1 | Users Manual supplement | Users Manual Adobe Acrobat PDF (198 kB) |
2005-10-24 00:00:00 2005-10-24 00:00:00 |
| 1 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (1496 kB) |
2005-10-24 00:00:00 2005-10-24 00:00:00 |
| 1 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (24 kB) |
2005-10-24 00:00:00 2005-10-24 00:00:00 |
| 1 | Request for confidentiality | Cover Letter(s) Adobe Acrobat PDF (53 kB) |
2005-10-24 00:00:00 2005-10-24 00:00:00 |
| 1 | Technical Report | Test Report Adobe Acrobat PDF (2370 kB) |
2005-10-24 00:00:00 2005-10-24 00:00:00 |
| 1 | OEM Integration Guide | Users Manual Adobe Acrobat PDF (166 kB) |
2005-10-24 00:00:00 2005-10-24 00:00:00 |
| 1 | Modular Approval Requirements Letter | Cover Letter(s) Adobe Acrobat PDF (10 kB) |
2005-10-24 00:00:00 2005-10-24 00:00:00 |
| 1 | Internal Photos | Internal Photos Adobe Acrobat PDF (361 kB) |
2005-10-24 00:00:00 2005-10-24 00:00:00 |
| 1 | FCC ID Label | ID Label/Location Info Adobe Acrobat PDF (1430 kB) |
2005-10-24 00:00:00 2005-10-24 00:00:00 |
| 1 | External Photos | External Photos Adobe Acrobat PDF (361 kB) |
2005-10-24 00:00:00 2005-10-24 00:00:00 |
| 1 | Cover Letter | Cover Letter(s) Adobe Acrobat PDF (7 kB) |
2005-10-24 00:00:00 2005-10-24 00:00:00 |
| 1 | Antenna Info 4 | Operational Description Adobe Acrobat PDF (59 kB) |
2005-10-24 00:00:00 2005-10-24 00:00:00 |
| 1 | Antenna Info 3 | Operational Description Adobe Acrobat PDF (71 kB) |
2005-10-24 00:00:00 2005-10-24 00:00:00 |
| 1 | Antenna Info 2 | Operational Description Adobe Acrobat PDF (53 kB) |
2005-10-24 00:00:00 2005-10-24 00:00:00 |
| 1 | Antenna Info 1 | Operational Description Adobe Acrobat PDF (23 kB) |
2005-10-24 00:00:00 2005-10-24 00:00:00 |
| 1 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (47 kB) |
2005-10-24 00:00:00 2005-10-24 00:00:00 |
| 1 | Frequency Block Diagram | Block Diagram Adobe Acrobat PDF (59 kB) |
2005-10-24 00:00:00 N/A |
| 1 | Theory of Operation | Operational Description Adobe Acrobat PDF (73 kB) |
2005-10-24 00:00:00 N/A |
| 1 | Schematics | Schematics Adobe Acrobat PDF (754 kB) |
2005-10-24 00:00:00 N/A |
Application Forms
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Applications are submitted for FCC ID and Grant requests. Click an above application to view details
Grants
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 07/14/2010 |
| Intermec Technologies Corporation |
| 9680 Old Bailes Rd. |
| Fort Mill, SC 29707 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHAIM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IM4 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.86099 |
| Limited Single Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. In previous filings under this FCC ID, this transmitter has been evaluated for co-location with FCC IDs: EHAMC75, EHABTS080, EHADRCB, used in Intermecs hand-held terminal model 700C. Additionally, collocated transmitter operating configurations in the grantees model IP30 RFID scanner have been evaluated as described in filings under this FCC ID with optional FCC IDs EHA-BTM4 (Model IP30), EHA802UIAG (Model CK61), HN2-BTM311 (Model CK61), EHA-01CN3 (Model CN3), EHA-06CN3 (Model CN3e), EHA-CK3DHIB (Model CK3), EHA-CK3DDIB (Model CK3), EHA-03CN4 (Model CN4), and EHA-04CN4 (Model CN4). For mobile collocated operating configurations in the IP30 as described in this and previous filings under this FCC ID, the antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States |
Date of Grant: 07/14/2010 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHAIM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IM4 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.86099 |
| Limited Single Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. In previous filings under this FCC ID, this transmitter has been evaluated for co-location with FCC IDs: EHAMC75, EHABTS080, EHADRCB, used in Intermecs hand-held terminal model 700C. Additionally, collocated transmitter operating configurations in the grantees model IP30 RFID scanner have been evaluated as described in filings under this FCC ID with optional FCC IDs EHA-BTM4 (Model IP30), EHA802UIAG (Model CK61), HN2-BTM311 (Model CK61), EHA-01CN3 (Model CN3), EHA-06CN3 (Model CN3e), EHA-CK3DHIB (Model CK3), EHA-CK3DDIB (Model CK3), EHA-03CN4 (Model CN4), and EHA-04CN4 (Model CN4). For mobile collocated operating configurations in the IP30 as described in this and previous filings under this FCC ID, the antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |
EA730596 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 10/27/2008 |
| Intermec Technologies Corporation |
| 9680 Old Bailes Rd. |
| Fort Mill, SC 29707 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHAIM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IM4 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.86099 |
| Limited Single Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. In previous filings under this FCC ID, this transmitter has been evaluated for co-location with FCC IDs: EHAMC75, EHABTS080, EHADRCB, used in Intermecs hand-held terminal model 700C. Additionally, collocated transmitter operating configurations in the grantees model IP30 RFID scanner have been evaluated as described in filings under this FCC ID with optional FCC IDs EHA-BTM4 (Model IP30), EHA802UIAG (Model CK61), HN2-BTM311 (Model CK61), EHA-01CN3 (Model CN3), EHA-06CN3 (Model CN3e), and EHA-CK3DHIB (Model CK3). Other collocation configurations require separate evaluation. For mobile collocated operating configurations in the IP30 as described in this and previous filings under this FCC ID, the antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Limited Single Modular |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States |
Date of Grant: 10/27/2008 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHAIM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IM4 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.86099 |
| Limited Single Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. In previous filings under this FCC ID, this transmitter has been evaluated for co-location with FCC IDs: EHAMC75, EHABTS080, EHADRCB, used in Intermecs hand-held terminal model 700C. Additionally, collocated transmitter operating configurations in the grantees model IP30 RFID scanner have been evaluated as described in filings under this FCC ID with optional FCC IDs EHA-BTM4 (Model IP30), EHA802UIAG (Model CK61), HN2-BTM311 (Model CK61), EHA-01CN3 (Model CN3), EHA-06CN3 (Model CN3e), and EHA-CK3DHIB (Model CK3). Other collocation configurations require separate evaluation. For mobile collocated operating configurations in the IP30 as described in this and previous filings under this FCC ID, the antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Limited Single Modular |
| Mail To: |
EA496098 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 10/24/2005 |
| Intermec Technologies Corporation |
| 9680 Old Bailes Rd. |
| Fort Mill, SC 29707 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHAIM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IM4 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.86099 |
| Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States |
Date of Grant: 10/24/2005 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHAIM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IM4 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.86099 |
| Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |
EA607317 |
| TCB |
GRANT OF EQUIPMENT
AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Northwest EMC, Inc.
22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 10/01/2006
|
| Intermec Technologies Corporation |
| 9680 Old Bailes Rd. |
|
Fort Mill, SC 29707
|
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHAIM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IM4 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts |
Frequency
Range (MHZ) |
Output
Watts |
Frequency
Tolerance |
Emission
Designator |
| 15C | 902.75 - 927.25 | 0.86099 |
| Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter has additionally been evaluated for co-location with FCC IDs: EHAMC75, EHABTS080, EHADRCB, used in Intermecs hand-held terminal model 700C. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Intermec Technologies Corporation
9680 Old Bailes Rd. Fort Mill, SC 29707 United States |
Date of Grant: 10/01/2006
|
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHAIM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IM4 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts |
Frequency
Range (MHZ) |
Output
Watts |
Frequency
Tolerance |
Emission
Designator |
| 15C | 902.75 - 927.25 | 0.86099 |
|
Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter has additionally been evaluated for co-location with FCC IDs: EHAMC75, EHABTS080, EHADRCB, used in Intermecs hand-held terminal model 700C. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| Mail To: |
|
EA484587 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 04/18/2012 |
| Intermec Technologies Corporation |
| 9680 Old Bailes Rd. |
| Fort Mill, SC 29707 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHAIM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IM4 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.86099 |
| Limited Single Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. In previous filings under this FCC ID, this transmitter has been evaluated for co-location with FCC IDs: EHAMC75, EHABTS080, EHADRCB, used in Intermecs hand-held terminal model 700C. Additionally, collocated transmitter operating configurations in the grantees model IP30 RFID scanner have been evaluated as described in filings under this FCC ID with optional FCC IDs EHA-BTM4 (Model IP30), EHA802UIAG (Model CK61), HN2-BTM311 (Model CK61), EHA-01CN3 (Model CN3), EHA-06CN3 (Model CN3e), EHA-CK3DHIB (Model CK3), EHA-CK3DDIB (Model CK3), EHA-03CN4 (Model CN4), and EHA-04CN4 (Model CN4). For mobile collocated operating configurations in the IP30 as described in this and previous filings under this FCC ID, the antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States |
Date of Grant: 04/18/2012 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHAIM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IM4 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.86099 |
| Limited Single Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. In previous filings under this FCC ID, this transmitter has been evaluated for co-location with FCC IDs: EHAMC75, EHABTS080, EHADRCB, used in Intermecs hand-held terminal model 700C. Additionally, collocated transmitter operating configurations in the grantees model IP30 RFID scanner have been evaluated as described in filings under this FCC ID with optional FCC IDs EHA-BTM4 (Model IP30), EHA802UIAG (Model CK61), HN2-BTM311 (Model CK61), EHA-01CN3 (Model CN3), EHA-06CN3 (Model CN3e), EHA-CK3DHIB (Model CK3), EHA-CK3DDIB (Model CK3), EHA-03CN4 (Model CN4), and EHA-04CN4 (Model CN4). For mobile collocated operating configurations in the IP30 as described in this and previous filings under this FCC ID, the antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
| Mail To: |
EA631275 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 02/17/2009 |
| Intermec Technologies Corporation |
| 9680 Old Bailes Rd. |
| Fort Mill, SC 29707 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHAIM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IM4 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.86099 |
| Limited Single Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. In previous filings under this FCC ID, this transmitter has been evaluated for co-location with FCC IDs: EHAMC75, EHABTS080, EHADRCB, used in Intermecs hand-held terminal model 700C. Additionally, collocated transmitter operating configurations in the grantees model IP30 RFID scanner have been evaluated as described in filings under this FCC ID with optional FCC IDs EHA-BTM4 (Model IP30), EHA802UIAG (Model CK61), HN2-BTM311 (Model CK61), EHA-01CN3 (Model CN3), EHA-06CN3 (Model CN3e), EHA-CK3DHIB (Model CK3),and EHA-CK3DDIB (Model CK3). Other collocation configurations require separate evaluation. For mobile collocated operating configurations in the IP30 as described in this and previous filings under this FCC ID, the antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States |
Date of Grant: 02/17/2009 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHAIM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IM4 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.86099 |
| Limited Single Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. In previous filings under this FCC ID, this transmitter has been evaluated for co-location with FCC IDs: EHAMC75, EHABTS080, EHADRCB, used in Intermecs hand-held terminal model 700C. Additionally, collocated transmitter operating configurations in the grantees model IP30 RFID scanner have been evaluated as described in filings under this FCC ID with optional FCC IDs EHA-BTM4 (Model IP30), EHA802UIAG (Model CK61), HN2-BTM311 (Model CK61), EHA-01CN3 (Model CN3), EHA-06CN3 (Model CN3e), EHA-CK3DHIB (Model CK3),and EHA-CK3DDIB (Model CK3). Other collocation configurations require separate evaluation. For mobile collocated operating configurations in the IP30 as described in this and previous filings under this FCC ID, the antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |
EA416838 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 10/30/2012 |
| Intermec Technologies Corporation |
| 9680 Old Bailes Rd. |
| Fort Mill, SC 29707 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHAIM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IM4 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.86099 |
| Limited Single Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. In previous filings under this FCC ID, this transmitter has been evaluated for co-location with FCC IDs: EHAMC75, EHABTS080, EHADRCB, used in Intermecs hand-held terminal model 700C. Additionally, collocated transmitter operating configurations in the grantees model IP30 RFID scanner have been evaluated as described in filings under this FCC ID with optional FCC IDs EHA-BTM4 (Model IP30), EHA802UIAG (Model CK61), HN2-BTM311 (Model CK61), EHA-01CN3 (Model CN3), EHA-06CN3 (Model CN3e), EHA-CK3DHIB (Model CK3), EHA-CK3DDIB (Model CK3), EHA-03CN4 (Model CN4), and EHA-04CN4 (Model CN4). For mobile collocated operating configurations in the IP30 as described in this and previous filings under this FCC ID, the antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States |
Date of Grant: 10/30/2012 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHAIM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IM4 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.86099 |
| Limited Single Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. In previous filings under this FCC ID, this transmitter has been evaluated for co-location with FCC IDs: EHAMC75, EHABTS080, EHADRCB, used in Intermecs hand-held terminal model 700C. Additionally, collocated transmitter operating configurations in the grantees model IP30 RFID scanner have been evaluated as described in filings under this FCC ID with optional FCC IDs EHA-BTM4 (Model IP30), EHA802UIAG (Model CK61), HN2-BTM311 (Model CK61), EHA-01CN3 (Model CN3), EHA-06CN3 (Model CN3e), EHA-CK3DHIB (Model CK3), EHA-CK3DDIB (Model CK3), EHA-03CN4 (Model CN4), and EHA-04CN4 (Model CN4). For mobile collocated operating configurations in the IP30 as described in this and previous filings under this FCC ID, the antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |
EA782042 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 03/12/2008 |
| Intermec Technologies Corporation |
| 9680 Old Bailes Rd. |
| Fort Mill, SC 29707 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHAIM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IM4 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.86099 |
| Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. In previous filings under this FCC ID, this transmitter has been evaluated for co-location with FCC IDs: EHAMC75, EHABTS080, EHADRCB, used in Intermecs hand-held terminal model 700C. Additionally, collocated transmitter operating configurations have been evaluated as described in this filing with optional FCC IDs EHA-BTM4 (Model IP30), EHA802UIAG (Model CK61), HN2-BTM311 (Model CK61), EHA-01CN3 (Model CN3), and EHA-06CN3 (Model CN3e). Other collocation configurations require separate evaluation. For mobile operating configurations as described in this filing, the antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States |
Date of Grant: 03/12/2008 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EHAIM4 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IM4 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.86099 |
| Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. In previous filings under this FCC ID, this transmitter has been evaluated for co-location with FCC IDs: EHAMC75, EHABTS080, EHADRCB, used in Intermecs hand-held terminal model 700C. Additionally, collocated transmitter operating configurations have been evaluated as described in this filing with optional FCC IDs EHA-BTM4 (Model IP30), EHA802UIAG (Model CK61), HN2-BTM311 (Model CK61), EHA-01CN3 (Model CN3), and EHA-06CN3 (Model CN3e). Other collocation configurations require separate evaluation. For mobile operating configurations as described in this filing, the antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |
EA512758 |