WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited

Fujitsu Limited Stylistic Q Series Tablet PC

FCC ID Filing: EJE-WB0105
Purchase on Amazon: Stylistic Q Series Tablet PC

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 2 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 3 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 4 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 5 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 6 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 7 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 8 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 9 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 10 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 11 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 12 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 13 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 14 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 15 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 16 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 17 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 18 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 19 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 20 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 21 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 22 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 23 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 24 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 25 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 26 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 27 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 28 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 29 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 30 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 31 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 32 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 33 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 34 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 35 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 36 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 37 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 38 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 39 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 40 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 41 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 42 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 43 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 44 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 45 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 46 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 47 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 48 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 49 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 50 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 51 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 52 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 53 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 54 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 55 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 56 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 57 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 58 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 59 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 60 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 61 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 62 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 63 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 64 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 65 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 66 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 67 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 68 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 69 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 70 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 71 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 72 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 73 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 74 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 75 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 76 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 77 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 78 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 79 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 80 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 81 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 82 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 83 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 84 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 85 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 86 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 87 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 88 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 89 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 90 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 91 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 92 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 93 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 94 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 95 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 96 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 97 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 98 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 99 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 100 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 101 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 102 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 103 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 104 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 105 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 106 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 107 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 108 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 109 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 110 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 111 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 112 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 113 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 114 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 115 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 116 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 117 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 118 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 119 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 120 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 121 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 122 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 123 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 124 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 125 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 126 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 127 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 128 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 129 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 130 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 131 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 132 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 133 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 134 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 135 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 136 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 137 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 138 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 139 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 140 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 141 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 142 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 143 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 144 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 145 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 146 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 147 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 148 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 149 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 150 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 151 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 152 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 153 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 154 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 155 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 156 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 157 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 158 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 159 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 160 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 161 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 162 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 163 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 164 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 165 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 166 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 167 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 168 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 169 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 170 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 171 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 172 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 173 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 174 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 175 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 176 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 177 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 178 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 179 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 180 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 181 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 182 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 183 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 184 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 185 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 186 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 187 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 188 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 189 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 190 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 191 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 192 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 193 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 194 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 195 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 196 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 197 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 198 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 199 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 200 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 201 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 202 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 203 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 204 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 205 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 206 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 207 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 208 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 209 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Page 210 of WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited

EMC Test Report
Application for Grant of Equipment Authorization
FCC Part 15 Subpart C
Models: 7265D2W and 7265D2W AN
FCC ID:
APPLICANT:
TEST SITE(S):
IC SITE REGISTRATION #:
REPORT DATE:
FINAL TEST DATES:
TOTAL NUMBER OF PAGES:
PROGRAM MGR /
TECHNICAL REVIEWER:
______________________________
David W. Bare
Chief Engineer
PD97265D2
Intel Mobile Communications
100 Center Point Circle, Suite 200
Columbia, SC 29210, USA
National Technical Systems - Silicon Valley
41039 Boyce Road.
Fremont, CA. 94538-2435
2845B-3; 2845B-4, 2845B-5, 2845B-7
July 8, 2014
June 5 through June 20, 2014
210
QUALITY ASSURANCE DELEGATE /
FINAL REPORT PREPARER:
______________________________
David Guidotti
Senior Technical Writer
National Technical Systems - Silicon Valley is accredited by the A2LA, certificate number 0214.26, to perform
the test(s) listed in this report, except where noted otherwise. This report and the information contained herein
represent the results of testing test articles identified and selected by the client performed to specifications and/or
procedures selected by the client. National Technical Systems (NTS) makes no representations, expressed or
implied, that such testing is adequate (or inadequate) to demonstrate efficiency, performance, reliability, or any
other characteristic of the articles being tested, or similar products. This report should not be relied upon as an
endorsement or certification by NTS of the equipment tested, nor does it represent any statement whatsoever as
to its merchantability or fitness of the test article, or similar products, for a particular purpose. This report shall
not be reproduced except in full
File: R95717
Page 1
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
REVISION HISTORY
Rev#
File: R95717
Date
July 8, 2014
Comments
Modified By
First release
Page 2
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
TABLE OF CONTENTS
REVISION HISTORY ................................................................................................................................................2
TABLE OF CONTENTS ............................................................................................................................................3
SCOPE ..........................................................................................................................................................................4
OBJECTIVE ................................................................................................................................................................4
STATEMENT OF COMPLIANCE ...........................................................................................................................5
DEVIATIONS FROM THE STANDARDS ..............................................................................................................5
TEST RESULTS SUMMARY ...................................................................................................................................6
DIGITAL TRANSMISSION SYSTEMS (2400 – 2483.5MHZ) ..............................................................................6
GENERAL REQUIREMENTS APPLICABLE TO ALL BANDS ..........................................................................6
MEASUREMENT UNCERTAINTIES....................................................................................................................7
EQUIPMENT UNDER TEST (EUT) DETAILS ......................................................................................................8
GENERAL................................................................................................................................................................8
ANTENNA SYSTEM ..............................................................................................................................................8
ENCLOSURE ...........................................................................................................................................................8
MODIFICATIONS ...................................................................................................................................................8
SUPPORT EQUIPMENT .........................................................................................................................................8
EUT INTERFACE PORTS ......................................................................................................................................9
EUT OPERATION ...................................................................................................................................................9
TEST SITE .................................................................................................................................................................10
GENERAL INFORMATION .................................................................................................................................10
CONDUCTED EMISSIONS CONSIDERATIONS ..............................................................................................10
RADIATED EMISSIONS CONSIDERATIONS ..................................................................................................10
MEASUREMENT INSTRUMENTATION ............................................................................................................11
RECEIVER SYSTEM ............................................................................................................................................11
INSTRUMENT CONTROL COMPUTER ............................................................................................................11
LINE IMPEDANCE STABILIZATION NETWORK (LISN) ...............................................................................11
FILTERS/ATTENUATORS ..................................................................................................................................12
ANTENNAS ...........................................................................................................................................................12
ANTENNA MAST AND EQUIPMENT TURNTABLE .......................................................................................12
INSTRUMENT CALIBRATION ...........................................................................................................................12
TEST PROCEDURES ..............................................................................................................................................13
EUT AND CABLE PLACEMENT ........................................................................................................................13
CONDUCTED EMISSIONS ..................................................................................................................................13
RADIATED EMISSIONS ......................................................................................................................................14
CONDUCTED EMISSIONS FROM ANTENNA PORT ......................................................................................16
BANDWIDTH MEASUREMENTS ......................................................................................................................16
SPECIFICATION LIMITS AND SAMPLE CALCULATIONS ...........................................................................17
CONDUCTED EMISSIONS SPECIFICATION LIMITS: FCC 15.207; FCC 15.107(A), RSS GEN ...................17
GENERAL TRANSMITTER RADIATED EMISSIONS SPECIFICATION LIMITS .........................................18
RECEIVER RADIATED SPURIOUS EMISSIONS SPECIFICATION LIMITS .................................................18
OUTPUT POWER LIMITS – DIGITAL TRANSMISSION SYSTEMS ..............................................................18
TRANSMIT MODE SPURIOUS RADIATED EMISSIONS LIMITS – FHSS AND DTS SYSTEMS.................19
SAMPLE CALCULATIONS - CONDUCTED EMISSIONS ...............................................................................19
SAMPLE CALCULATIONS - RADIATED EMISSIONS ....................................................................................19
SAMPLE CALCULATIONS - FIELD STRENGTH TO EIRP CONVERSION ...................................................20
APPENDIX A TEST EQUIPMENT CALIBRATION DATA ..............................................................................21
APPENDIX B TEST DATA .....................................................................................................................................24
END OF REPORT ..................................................................................................................................................210
File: R95717
Page 3
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
SCOPE
An electromagnetic emissions test has been performed on the Intel Mobile Communications
model 7265D2W, pursuant to the following rules:
FCC Part 15 Subpart C
Conducted and radiated emissions data has been collected, reduced, and analyzed within this
report in accordance with measurement guidelines set forth in the following reference
standards and as outlined in National Technical Systems - Silicon Valley test procedures:
ANSI C63.10-2009
FCC DTS Measurement Guidance KDB558074
The intentional radiator above has been tested in a simulated typical installation to
demonstrate compliance with the relevant Industry Canada performance and procedural
standards.
Final system data was gathered in a mode that tended to maximize emissions by varying
orientation of EUT, orientation of power and I/O cabling, antenna search height, and antenna
polarization.
Every practical effort was made to perform an impartial test using appropriate test equipment
of known calibration. All pertinent factors have been applied to reach the determination of
compliance.
OBJECTIVE
The primary objective of the manufacturer is compliance with the regulations outlined in the
previous section.
Prior to marketing in the USA, all unlicensed transmitters and transceivers require
certification. Receive-only devices operating between 30 MHz and 960 MHz are subject to
either certification or a manufacturer’s declaration of conformity, with all other receive-only
devices exempt from the technical requirements.
Prior to marketing in Canada, Class I transmitters, receivers and transceivers require
certification. Class II devices are required to meet the appropriate technical requirements but
are exempt from certification requirements.
Certification is a procedure where the manufacturer submits test data and technical
information to a certification body and receives a certificate or grant of equipment
authorization upon successful completion of the certification body’s review of the submitted
documents. Once the equipment authorization has been obtained, the label indicating
compliance must be attached to all identical units, which are subsequently manufactured.
Testing was performed only on model 7265D2W. This model was considered representative
of the following models:
7265D2W and 7265D2W AN
File: R95717
Page 4
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
STATEMENT OF COMPLIANCE
The tested sample of Intel Mobile Communications model 7265D2W complied with the
requirements of the following regulations:
Industry Canada RSS-Gen Issue 3
RSS 210 Issue 8 “Low-power Licence-exempt Radiocommunication Devices (All
Frequency Bands): Category I Equipment”
FCC Part 15 Subpart C
Maintenance of compliance is the responsibility of the manufacturer. Any modifications to
the product should be assessed to determine their potential impact on the compliance status of
the device with respect to the standards detailed in this test report.
The test results recorded herein are based on a single type test of Intel Mobile
Communications model 7265D2W and therefore apply only to the tested sample. The
sample was selected and prepared by Steven Hackett of Intel Mobile Communications.
DEVIATIONS FROM THE STANDARDS
No deviations were made from the published requirements listed in the scope of this report.
File: R95717
Page 5
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
TEST RESULTS SUMMARY
DIGITAL TRANSMISSION SYSTEMS (2400 – 2483.5MHz)
FCC
Rule Part
RSS
Rule Part
Description
Measured Value /
Comments
Limit / Requirement
Result
15.247(a)
RSS 210
A8.2
Digital Modulation
Systems uses OFDM /
DSSS techniques
System must utilize a
digital transmission
technology
Complies
15.247 (a) (2)
RSS 210
A8.2 (1)
6dB Bandwidth
10.04 MHz
>500kHz
Complies
1Watt, EIRP limited to
4 Watts.
Complies
8dBm/3kHz
Complies
< -20dBc Note 2
Complies
15.207 in restricted
bands, all others
< -20dBc
Complies
Limit / Requirement
Result
(margin)
Unique or integral
antenna required
Complies
Refer to page 17
Complies
Refer to OET 65, FCC
Part 1 and RSS 102
Complies
15.247 (b) (3)
RSS 210
A8.2 (4)
Output Power
(multipoint systems)
b mode: 18.3 dBm
g mode: 20.4 dBm
n20 mode: 22.8 dBm
n40 mode: 21.8 dBm
BLE mode: 3.5 dBm
EIRP = 0.400 W Note 1
15.247(d)
RSS 210
A8.2 (2)
Power Spectral Density
1.3 dBm / 3kHz
Antenna Port Spurious
All spurious emissions <
Emissions 30MHz – 25
-20dBc
GHz
Radiated Spurious
15.247(c) /
53.5 dBµ V/m @ 2390.0
RSS 210 A8.5
Emissions
15.209
MHz (-0.5 dB)
30MHz – 25 GHz
Note 1: EIRP calculated using antenna gain of 3.2 dBi for the highest EIRP system.
15.247(c)
RSS 210 A8.5
GENERAL REQUIREMENTS APPLICABLE TO ALL BANDS
FCC Rule
Part
RSS
Rule part
Description
15.203
RF Connector
15.207
RSS GEN
Table 4
AC Conducted
Emissions
15.247 (b) (5)
15.407 (f)
RSS 102
RF Exposure
Requirements
File: R95717
Measured Value /
Comments
Unique iPex-4
connector
62.0 dBµ V @ 0.152
MHz (-3.9 dB)
Refer to SAR report and
RSS 102 declaration
and User Manual
statements
Page 6
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
MEASUREMENT UNCERTAINTIES
ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated
with the emissions test results be included in the report. The measurement uncertainties
given below are based on a 95% confidence level and were calculated in accordance with
UKAS document LAB 34.
Measurement Type
Measurement Unit
Frequency Range
Expanded Uncertainty
RF power, conducted (power meter)
RF power, conducted (Spectrum analyzer)
Conducted emission of transmitter
Conducted emission of receiver
Radiated emission (substitution method)
dBm
dBm
dBm
dBm
dBm
25 to 7000 MHz
25 to 7000 MHz
25 to 26500 MHz
25 to 26500 MHz
25 to 26500 MHz
25 to 1000 MHz
1000 to 40000 MHz
0.15 to 30 MHz
± 0.52 dB
± 0.7 dB
± 0.7 dB
± 0.7 dB
± 2.5 dB
± 3.6 dB
± 6.0 dB
± 2.4 dB
Radiated emission (field strength)
dBμV/m
Conducted Emissions (AC Power)
dBμV
File: R95717
Page 7
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
EQUIPMENT UNDER TEST (EUT) DETAILS
GENERAL
The Intel Mobile Communications models 7265D2W and 7265D2W AN are 2x2 Wi-Fi
and Bluetooth radio modules which support 802.11abgnac in 2x2 (MIMO) and 1x1
(SISO) modes & BT 4.0 (Basic rate, EDR and BLE modes). Since the EUT would be
placed on a tabletop during operation, the EUT was treated as tabletop equipment during
testing to simulate the end-user environment. The electrical rating of the EUT is 3.3
VDC.
The sample was received on June 5, 2014 and tested on June 5 through June 20, 2014.
The EUT consisted of the following component(s):
Manufacturer
Intel Mobile
Communications
Model
7265D2W
Description
Serial Number
FCC and Canada IDs
M.2 Card form factor
00:15:00:F1:5B:5D or
PD97265D2
Bluetooth / IEEE
00:15:00:F1:5B:3A
1000M-7265D2
802.11a/b/g/n/ac wireless
network adapter
ANTENNA SYSTEM
The EUT antenna is a two-antenna PIFA antenna system – Shanghai Universe
Communication Electron Co., Ltd. One or both antennas are used for WiFi operation and
one for Bluetooth operation. For Bluetooth: Tx is chain B, Rx is chain B. For WiFi, only
Chain A is used for transmit in the 2.4GHz band when Bluetooth is active, both chains
can be used in 5GHz bands.
ENCLOSURE
The EUT has no enclosure. It is designed to be installed within the enclosure of a host
computer.
MODIFICATIONS
No modifications were made to the EUT during the time the product was at NTS Silicon
Valley.
SUPPORT EQUIPMENT
The following equipment was used as support equipment for testing:
File: R95717
Company
Model
Description
Serial Number
FCC ID
Dell
Hanns G
Logitech
Intel
DCCY
HX191DPBUFLF6
5680157
NGFF Extension REV
01
Desktop computer
LCD monitor
Mouse
Extension Board
BJYN64J
017GR3XY00286
LNA20956449
4164912-200
Page 8
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
EUT INTERFACE PORTS
The I/O cabling configuration during testing was as follows:
Port
Antenna (x2)
Desktop Mini PCIe Slot
Desktop USB
Desktop AC power supply
Power (test fixture)
Desktop USB
Desktop USB
Desktop Display
Connected To
Antenna
Extension Board
Extension Board
AC Main
Computer
Keyboard
Mouse
Monitor
Cable(s)
Description
Shielded or Unshielded
Length(m)
RF cable
Ribbon
Multiwire
power cable
Multiwire
Multiwire
Multiwire
Multiwire
Shielded
Unshielded
Unshielded
Unshielded
Unshielded
Shielded
Shielded
Shielded
0.3
0.8
1.2
2.3
1.5
1.0
1.0
1.0
EUT OPERATION
During emissions testing the EUT was transmitting on the frequency & at the power level
selected in the proprietary DRTU control software.
File: R95717
Page 9
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
TEST SITE
GENERAL INFORMATION
Final test measurements were taken at the test sites listed below. Pursuant to section
2.948 of the FCC’s Rules and section 3.3 of RSP-100, construction, calibration, and
equipment data has been filed with the Commission and with industry Canada.
Site
Chamber 3
Chamber 4
Chamber 5
Chamber 7
Designation / Registration Numbers
FCC
Canada
US0027
US0027
US0027
US0027
2845B-3
2845B-4
2845B-5
2845B-7
Location
41039 Boyce Road
Fremont,
CA 94538-2435
ANSI C63.4 recommends that ambient noise at the test site be at least 6 dB below the
allowable limits. Ambient levels are below this requirement. The test site(s) contain
separate areas for radiated and conducted emissions testing. Considerable engineering
effort has been expended to ensure that the facilities conform to all pertinent
requirements of ANSI C63.4.
CONDUCTED EMISSIONS CONSIDERATIONS
Conducted emissions testing is performed in conformance with ANSI C63.10.
Measurements are made with the EUT connected to the public power network through a
nominal, standardized RF impedance, which is provided by a line impedance stabilization
network, known as a LISN. A LISN is inserted in series with each current-carrying
conductor in the EUT power cord.
RADIATED EMISSIONS CONSIDERATIONS
The FCC has determined that radiation measurements made in a shielded enclosure are
not suitable for determining levels of radiated emissions. Radiated measurements are
performed in an open field environment or in a semi-anechoic chamber. The test sites are
maintained free of conductive objects within the CISPR defined elliptical area
incorporated in ANSI C63.4 guidelines and meet the Normalized Site Attenuation (NSA)
requirements of ANSI C63.4.
File: R95717
Page 10
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
MEASUREMENT INSTRUMENTATION
RECEIVER SYSTEM
An EMI receiver as specified in CISPR 16-1-1 is used for emissions measurements. The
receivers used can measure over the frequency range of 9 kHz up to 2000 MHz. These
receivers allow both ease of measurement and high accuracy to be achieved. The
receivers have Peak, Average, and CISPR (Quasi-peak) detectors built into their design
so no external adapters are necessary. The receiver automatically sets the required
bandwidth for the CISPR detector used during measurements. If the repetition frequency
of the signal being measured is below 20Hz, peak measurements are made in lieu of
Quasi-Peak measurements.
For measurements above the frequency range of the receivers, a spectrum analyzer is
utilized because it provides visibility of the entire spectrum along with the precision and
versatility required to support engineering analysis. Average measurements above
1000MHz are performed on the spectrum analyzer using the linear-average method with
a resolution bandwidth of 1 MHz and a video bandwidth of 10 Hz, unless the signal is
pulsed in which case the average (or video) bandwidth of the measuring instrument is
reduced to onset of pulse desensitization and then increased.
INSTRUMENT CONTROL COMPUTER
The receivers utilize either a Rohde & Schwarz EZM Spectrum Monitor/Controller or
contain an internal Spectrum Monitor/Controller to view and convert the receiver
measurements to the field strength at an antenna or voltage developed at the LISN
measurement port, which is then compared directly with the appropriate specification
limit. This provides faster, more accurate readings by performing the conversions
described under Sample Calculations within the Test Procedures section of this report.
Results are printed in a graphic and/or tabular format, as appropriate. A personal
computer is used to record all measurements made with the receivers.
The Spectrum Monitor provides a visual display of the signal being measured. In
addition, the controller or a personal computer run automated data collection programs
which control the receivers. This provides added accuracy since all site correction
factors, such as cable loss and antenna factors are added automatically.
LINE IMPEDANCE STABILIZATION NETWORK (LISN)
Line conducted measurements utilize a fifty microhenry Line Impedance Stabilization
Network as the monitoring point. The LISN used also contains a 250 uH CISPR adapter.
This network provides for calibrated radio frequency noise measurements by the design
of the internal low pass and high pass filters on the EUT and measurement ports,
respectively.
File: R95717
Page 11
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
FILTERS/ATTENUATORS
External filters and precision attenuators are often connected between the receiving
antenna or LISN and the receiver. This eliminates saturation effects and non-linear
operation due to high amplitude transient events.
ANTENNAS
A loop antenna is used below 30 MHz. For the measurement range 30 MHz to 1000
MHz either a combination of a biconical antenna and a log periodic or a bi-log antenna is
used. Above 1000 MHz, horn antennas are used. The antenna calibration factors to
convert the received voltage to an electric field strength are included with appropriate
cable loss and amplifier gain factors to determine an overall site factor, which is then
programmed into the test receivers or incorporated into the test software.
ANTENNA MAST AND EQUIPMENT TURNTABLE
The antennas used to measure the radiated electric field strength are mounted on a nonconductive antenna mast equipped with a motor-drive to vary the antenna height.
Measurements below 30 MHz are made with the loop antenna at a fixed height of 1m
above the ground plane.
ANSI C63.10 specifies that the test height above ground for table mounted devices shall
be 80 centimeters. Floor mounted equipment shall be placed on the ground plane if the
device is normally used on a conductive floor or separated from the ground plane by
insulating material from 3 to 12 mm if the device is normally used on a non-conductive
floor as specified in ANSI C63.4. During radiated measurements, the EUT is positioned
on a motorized turntable in conformance with this requirement.
INSTRUMENT CALIBRATION
All test equipment is regularly checked to ensure that performance is maintained in
accordance with the manufacturer's specifications. All antennas are calibrated at regular
intervals with respect to tuned half-wave dipoles. An exhibit of this report contains the
list of test equipment used and calibration information.
File: R95717
Page 12
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
TEST PROCEDURES
EUT AND CABLE PLACEMENT
The regulations require that interconnecting cables be connected to the available ports of
the unit and that the placement of the unit and the attached cables simulate the worst case
orientation that can be expected from a typical installation, so far as practicable. To this
end, the position of the unit and associated cabling is varied within the guidelines of
ANSI C63.10, and the worst-case orientation is used for final measurements.
CONDUCTED EMISSIONS
Conducted emissions are measured at the plug end of the power cord supplied with the
EUT. Excess power cord length is wrapped in a bundle between 30 and 40 centimeters in
length near the center of the cord. Preliminary measurements are made to determine the
highest amplitude emission relative to the specification limit for all the modes of
operation. Placement of system components and varying of cable positions are performed
in each mode. A final peak mode scan is then performed in the position and mode for
which the highest emission was noted on all current carrying conductors of the power
cord.
LISN
EUT
LISN
AE
0.4m
0.8m
Figure 1 Typical Conducted Emissions Test Configuration
File: R95717
Page 13
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
RADIATED EMISSIONS
A preliminary scan of the radiated emissions is performed in which all significant EUT
frequencies are identified with the system in a nominal configuration. At least two scans
are performed, one scan for each antenna polarization (horizontal and vertical; loop
parallel and perpendicular to the EUT). During the preliminary scans, the EUT is rotated
through 360˚, the antenna height is varied (for measurements above 30 MHz) and cable
positions are varied to determine the highest emission relative to the limit. Preliminary
scans may be performed in a fully anechoic chamber for the purposes of identifying the
frequencies of the highest emissions from the EUT.
A speaker is provided in the receiver to aid in discriminating between EUT and ambient
emissions. Other methods used during the preliminary scan for EUT emissions involve
scanning with near field magnetic loops, monitoring I/O cables with RF current clamps,
and cycling power to the EUT.
Final maximization is a phase in which the highest amplitude emissions identified in the
spectral search are viewed while the EUT azimuth angle is varied from 0 to 360 degrees
relative to the receiving antenna. The azimuth, which results in the highest emission is
then maintained while varying the antenna height from one to four meters (for
measurements above 30 MHz, measurements below 30 MHz are made with the loop
antenna at a fixed height of 1m). The result is the identification of the highest amplitude
for each of the highest peaks. Each recorded level is corrected in the receiver using
appropriate factors for cables, connectors, antennas, and preamplifier gain.
When testing above 18 GHz, the receive antenna is located at 1meter from the EUT and
the antenna height is restricted to a maximum of 2.5 meters.
REAR VIEW
0.4m
AC Outlets (flush-mounted)
0.8m
SIDE VIEW
Typical Test Configuration for Radiated Field Strength Measurements
File: R95717
Page 14
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
EUT
Antenna
The anechoic materials on the walls and ceiling ensure compliance with the normalized site
attenuation requirements of CISPR 16 / CISPR 22 / ANSI C63.4 for an alternate test site at the
measurement distances used.
Floor-standing equipment is placed on the floor with insulating supports between the unit and the
ground plane.
EUT
Antenna
height range
1 to 4 m
0.8m
Test Configuration for Radiated Field Strength Measurements
Semi-Anechoic Chamber, Plan and Side Views
File: R95717
Page 15
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
CONDUCTED EMISSIONS FROM ANTENNA PORT
Direct measurements of power, bandwidth and power spectral density are performed,
where possible, with the antenna port of the EUT connected to either the power meter or
spectrum analyzer via a suitable attenuator and/or filter. These are used to ensure that the
front end of the measurement instrument is not overloaded by the fundamental
transmission.
EUT
Attenuator
(optional)
Spectrum
Analyzer (or
Power Meter)
Test Configuration for Antenna Port Measurements
Measurement bandwidths (video and resolution) are set in accordance with the relevant
standards and NTS Silicon Valley’s test procedures for the type of radio being tested.
When power measurements are made using a resolution bandwidth less than the signal
bandwidth the power is calculated by summing the power across the signal bandwidth
using either the analyzer channel power function or by capturing the trace data and
calculating the power using software. In both cases the summed power is corrected to
account for the equivalent noise bandwidth (ENBW) of the resolution bandwidth used.
If power averaging is used (typically for certain digital modulation techniques), the EUT
is configured to transmit continuously. Power averaging is performed using either the
built-in function of the analyzer or, if the analyzer does not feature power averaging,
using external software. In both cases the average power is calculated over a number of
sweeps (typically 100). When the EUT cannot be configured to continuously transmit
then either the analyzer is configured to perform a gated sweep to ensure that the power
is averaged over periods that the device is transmitting or power averaging is disabled
and a max-hold feature is used.
If a power meter is used to make output power measurements the sensor head type (peak
or average) is stated in the test data table.
BANDWIDTH MEASUREMENTS
The 6dB, 20dB, 26dB and/or 99% signal bandwidth are measured using the bandwidths
recommended by ANSI C63.10 and RSS GEN.
File: R95717
Page 16
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
SPECIFICATION LIMITS AND SAMPLE CALCULATIONS
The limits for conducted emissions are given in units of microvolts, and the limits for
radiated emissions are given in units of microvolts per meter at a specified test distance.
Data is measured in the logarithmic form of decibels relative to one microvolt, or dB
microvolts (dBuV). For radiated emissions, the measured data is converted to the field
strength at the antenna in dB microvolts per meter (dBuV/m). The results are then
converted to the linear forms of uV and uV/m for comparison to published specifications.
For reference, converting the specification limits from linear to decibel form is
accomplished by taking the base ten logarithm, then multiplying by 20. These limits in
both linear and logarithmic form are as follows:
CONDUCTED EMISSIONS SPECIFICATION LIMITS: FCC 15.207; FCC 15.107(a), RSS GEN
The table below shows the limits for the emissions on the AC power line from an
intentional radiator and a receiver.
Frequency
(MHz)
0.150 to 0.500
0.500 to 5.000
5.000 to 30.000
File: R95717
Average
Limit
(dBuV)
Quasi Peak
Limit
(dBuV)
Linear decrease on
logarithmic frequency axis
between 56.0 and 46.0
46.0
50.0
Linear decrease on
logarithmic frequency axis
between 66.0 and 56.0
56.0
60.0
Page 17
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
GENERAL TRANSMITTER RADIATED EMISSIONS SPECIFICATION LIMITS
The table below shows the limits for the spurious emissions from transmitters that fall in
restricted bands 1 (with the exception of transmitters operating under FCC Part 15 Subpart
D and RSS 210 Annex 9), the limits for all emissions from a low power device operating
under the general rules of RSS 310 (tables 3 and 4), RSS 210 (table 2) and FCC Part 15
Subpart C section 15.209.
Frequency Range
(MHz)
Limit
(uV/m)
Limit
(dBuV/m @ 3m)
0.009-0.490
2400/FKHz @ 300m
67.6-20*log10(FKHz) @ 300m
0.490-1.705
24000/FKHz @ 30m
87.6-20*log10(FKHz) @ 30m
1.705 to 30
30 @ 30m
29.5 @ 30m
30 to 88
100 @ 3m
40 @ 3m
88 to 216
150 @ 3m
43.5 @ 3m
216 to 960
200 @ 3m
46.0 @ 3m
Above 960
500 @ 3m
54.0 @ 3m
RECEIVER RADIATED SPURIOUS EMISSIONS SPECIFICATION LIMITS
The table below shows the limits for the spurious emissions from receivers as detailed in
FCC Part 15.109, RSS 210 Table 2, RSS GEN Table 1 and RSS 310 Table 3. Note that
receivers operating outside of the frequency range 30 MHz – 960 MHz are exempt from
the requirements of 15.109.
Frequency Range
(MHz)
Limit
(uV/m @ 3m)
Limit
(dBuV/m @ 3m)
30 to 88
100
40
88 to 216
150
43.5
216 to 960
200
46.0
Above 960
500
54.0
OUTPUT POWER LIMITS – DIGITAL TRANSMISSION SYSTEMS
The table below shows the limits for output power and output power density. Where the
signal bandwidth is less than 20 MHz the maximum output power is reduced to the power
spectral density limit plus 10 times the log of the bandwidth (in MHz).
Operating Frequency (MHz)
Output Power
Power Spectral Density
902 – 928
2400 – 2483.5
5725 – 5850
1 Watt (30 dBm)
1 Watt (30 dBm)
1 Watt (30 dBm)
8 dBm/3kHz
8 dBm/3kHz
8 dBm/3kHz
The maximum permitted output power is reduced by 1dB for every dB the antenna gain
exceeds 6dBi. Fixed point-to-point applications using the 5725 – 5850 MHz band are not
subject to this restriction.
The restricted bands are detailed in FCC 15.203, RSS 210 Table 1 and RSS 310 Table 2
File: R95717
Page 18
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
TRANSMIT MODE SPURIOUS RADIATED EMISSIONS LIMITS – FHSS and DTS SYSTEMS
The limits for unwanted (spurious) emissions from the transmitter falling in the restricted
bands are those specified in the general limits sections of FCC Part 15 and RSS 210. All
other unwanted (spurious) emissions shall be at least 20dB below the level of the highest
in-band signal level (30dB if the power is measured using the sample detector/power
averaging method).
SAMPLE CALCULATIONS - CONDUCTED EMISSIONS
Receiver readings are compared directly to the conducted emissions specification limit
(decibel form) as follows:
Rr - S = M
where:
Rr = Receiver Reading in dBuV
S = Specification Limit in dBuV
M = Margin to Specification in +/- dB
SAMPLE CALCULATIONS - RADIATED EMISSIONS
Receiver readings are compared directly to the specification limit (decibel form). The
receiver internally corrects for cable loss, preamplifier gain, and antenna factor. The
calculations are in the reverse direction of the actual signal flow, thus cable loss is added
and the amplifier gain is subtracted. The Antenna Factor converts the voltage at the
antenna coaxial connector to the field strength at the antenna elements.
A distance factor, when used for electric field measurements above 30MHz, is calculated
by using the following formula:
Fd = 20*LOG10 (Dm/Ds)
where:
Fd = Distance Factor in dB
Dm = Measurement Distance in meters
Ds = Specification Distance in meters
For electric field measurements below 30MHz the extrapolation factor is either
determined by making measurements at multiple distances or a theoretical value is
calculated using the formula:
Fd = 40*LOG10 (Dm/Ds)
Measurement Distance is the distance at which the measurements were taken and
Specification Distance is the distance at which the specification limits are based. The
antenna factor converts the voltage at the antenna coaxial connector to the field strength
at the antenna elements.
File: R95717
Page 19
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
The margin of a given emission peak relative to the limit is calculated as follows:
Rc = Rr + Fd
and
M = Rc - Ls
where:
Rr = Receiver Reading in dBuV/m
Fd = Distance Factor in dB
Rc = Corrected Reading in dBuV/m
Ls = Specification Limit in dBuV/m
M = Margin in dB Relative to Spec
SAMPLE CALCULATIONS - FIELD STRENGTH TO EIRP CONVERSION
Where the radiated electric field strength is expressed in terms of the equivalent isotropic
radiated power (eirp), or where a field strength measurement of output power is made in
lieu of a direct measurement, the following formula is used to convert between eirp and
field strength at a distance of d (meters) from the equipment under test:
= 1000000 √ 30 P
microvolts per meter
where P is the eirp (Watts)
For a measurement at 3m the conversion from a logarithmic value for field strength
(dBuV/m) to an eirp power (dBm) is -95.3dB.
File: R95717
Page 20
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
Appendix A Test Equipment Calibration Data
Radio Antenna Port (Power and Spurious Emissions), 05-Jun-14
Manufacturer
Description
Model
Rohde & Schwarz
EMI Test Receiver, 20 Hz-7 GHz ESIB7
Radiated Spurious Emissions, Bandedges, 2.4 GHz, 06-Jun-14
Manufacturer
Description
Model
EMCO
Antenna, Horn, 1-18 GHz
3115
(SA40-Red)
Rohde & Schwarz
EMI Test Receiver, 20 Hz-7 GHz ESIB7
Radiated Spurious Emissions, Bandedges, 2.4 GHz, 09-Jun-14
Manufacturer
Description
Model
EMCO
Antenna, Horn, 1-18 GHz
3115
(SA40-Red)
Rohde & Schwarz
EMI Test Receiver, 20 Hz-7 GHz ESIB7
Radiated Spurious Emissions, Bandedges, 2.4 GHz, 10-Jun-14
Manufacturer
Description
Model
EMCO
Antenna, Horn, 1-18 GHz
3115
(SA40-Red)
Rohde & Schwarz
EMI Test Receiver, 20 Hz-7 GHz ESIB7
Radiated Spurious Emissions, 1000 - 25,000 MHz, 11-Jun-14
Manufacturer
Description
Model
EMCO
Antenna, Horn, 1-18 GHz
3115
(SA40-Red)
Hewlett Packard
SpecAn 9 kHz - 40 GHz, FT
8564E (84125C)
(SA40) Blue
Rohde & Schwarz
EMI Test Receiver, 20 Hz-7 GHz ESIB7
Hewlett Packard
Microwave Preamplifier, 18449B
26.5GHz
Micro-Tronics
Band Reject Filter, 2400-2500
BRM50702-02
MHz
Radiated Emissions, 1,000 - 6,500 MHz and 18,000 - 26,000MHz, 12-Jun-14
Manufacturer
Description
Model
Hewlett Packard
SpecAn 9 kHz - 40 GHz, FT
8564E (84125C)
(SA40) Blue
Rohde & Schwarz
EMI Test Receiver, 20 Hz-7 GHz ESIB7
EMCO
Antenna, Horn, 1-18 GHz
3115
Hewlett Packard
Head (Inc flex cable,
84125C
(1742,1743) Blue)
Hewlett Packard
HF Amplifier, 45 MHz -50 GHz
83051A (84125C)
(with 1620)
Hewlett Packard
HF Amplifier, 45 MHz -50 GHz
83051A (84125C)
(with 1620)
A. H. Systems
Purple System Horn, 18-40GHz
SAS-574, p/n: 2581
File: R95717
Asset #
1538
Cal Due
12/14/2014
Asset #
1142
Cal Due
8/23/2014
1538
12/14/2014
Asset #
1142
Cal Due
8/23/2014
1538
12/14/2014
Asset #
1142
Cal Due
8/23/2014
1538
12/14/2014
Asset #
1142
Cal Due
8/23/2014
1393
5/6/2015
1538
1780
12/14/2014
11/26/2014
2249
10/3/2014
Asset #
1393
Cal Due
5/6/2015
1538
1561
1620
12/14/2014
7/12/2014
5/6/2015
1742
5/6/2015
1743
5/6/2015
2160
6/28/2014
Page 21
National Technical Systems - Silicon Valley -- EMC Department
Radiated Emissions, 1,000 - 26,000 MHz, 16-Jun-14
Manufacturer
Description
Hewlett Packard
SpecAn 9 KHz-26.5 GHz, NonProgram
EMCO
Antenna, Horn, 1-18 GHz
Hewlett Packard
Microwave Preamplifier, 126.5GHz
Micro-Tronics
Band Reject Filter, 2400-2500
MHz
Radiated Emissions, 1,000 - 6,000 MHz, 16-Jun-14
Manufacturer
Description
EMCO
Antenna, Horn, 1-18 GHz
Rohde & Schwarz
EMI Test Receiver, 20 Hz-7 GHz
Radiated Emissions, 1,000 - 18,000 MHz, 16-Jun-14
Manufacturer
Description
Hewlett Packard
SpecAn 9 KHz-26.5 GHz, NonProgram
EMCO
Antenna, Horn, 1-18 GHz
Hewlett Packard
Microwave Preamplifier, 126.5GHz
Micro-Tronics
Band Reject Filter, 2400-2500
MHz
Radiated Emissions, 18,000 - 26,500 MHz, 17-Jun-14
Manufacturer
Description
Hewlett Packard
SpecAn 9 kHz - 40 GHz, FT
(SA40) Blue
Hewlett Packard
HF Amplifier, 45 MHz -50 GHz
(with 1620)
Hewlett Packard
HF Amplifier, 45 MHz -50 GHz
(with 1620)
A. H. Systems
Purple System Horn, 18-40GHz
Test Report
Report Date: July 8, 2014
Model
8563E
Asset #
284
Cal Due
2/26/2015
3115
8449B
786
870
12/20/2015
2/20/2015
BRM50702-02
1683
8/2/2014
Model
3115
ESIB7
Asset #
786
1538
Cal Due
12/20/2015
12/14/2014
Model
8563E
Asset #
284
Cal Due
2/26/2015
3115
8449B
786
870
12/20/2015
2/20/2015
BRM50702-02
1683
8/2/2014
Model
8564E (84125C)
Asset #
1393
Cal Due
5/6/2015
83051A (84125C)
1742
5/6/2015
83051A (84125C)
1743
5/6/2015
SAS-574, p/n: 2581
2160
6/28/2014
Asset #
2139
Cal Due
4/8/2015
2442
12/19/2014
Asset #
1422
1423
Cal Due
1/24/2015
9/17/2014
2139
4/8/2015
Radio Antenna Port (Power and Spurious Emissions), 17-Jun-14
Manufacturer
Description
Model
Agilent Technologies
PSA, Spectrum Analyzer,
E4446A
(installed options, 111, 115, 123,
1DS, B7J, HYX,
Agilent Technologies
USB Average Power Sensor
U2001A
Radio Antenna Port (Power and Spurious Emissions), 18-Jun-14
Manufacturer
Description
Model
Rohde & Schwarz
Power Meter, Single Channel
NRVS
Rohde & Schwarz
Power Sensor 100 uW - 2 Watts NRV-Z32
use with 20dB attenuator
sn:1031.6959.00 only
Agilent Technologies
PSA, Spectrum Analyzer,
E4446A
(installed options, 111, 115, 123,
1DS, B7J, HYX,
File: R95717
Page 22
National Technical Systems - Silicon Valley -- EMC Department
Radio Antenna Port (Power and Spurious Emissions), 19-Jun-14
Manufacturer
Description
Model
Rohde & Schwarz
Power Sensor, 1 uW-100 mW,
NRV-Z51
DC-18 GHz, 50ohms
Rohde & Schwarz
Power Meter, Dual Channel
NRVD
Rohde & Schwarz
Power Sensor 100 uW - 2 Watts NRV-Z32
use with 20dB attenuator
sn:1031.6959.00 only
Agilent Technologies
PSA, Spectrum Analyzer,
E4446A
(installed options, 111, 115, 123,
1DS, B7J, HYX,
Radio Antenna Port (Power and Spurious Emissions), 20-Jun-14
Manufacturer
Description
Model
Rohde & Schwarz
Power Meter, Dual Channel
NRVD
Rohde & Schwarz
Power Sensor 100 uW - 2 Watts NRV-Z32
use with 20dB attenuator
sn:1031.6959.00 only
Agilent Technologies
PSA, Spectrum Analyzer,
E4446A
(installed options, 111, 115, 123,
1DS, B7J, HYX,
File: R95717
Test Report
Report Date: July 8, 2014
Asset #
1070
Cal Due
6/6/2015
1071
1423
3/24/2015
9/17/2014
2139
4/8/2015
Asset #
1071
1423
Cal Due
3/24/2015
9/17/2014
2139
4/8/2015
Page 23
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
Appendix B Test Data
T95471 Pages 25 – 166
T95472 Pages 167 - 209
File: R95717
Page 24
EMC Test Data
Client: Intel Corporation
Product 7265D2W
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Environment:
Contact: Steve Hackett
Emissions Standard(s): FCC Part 15.247, 15.407, RSS-210
Immunity Standard(s): -
J94914
T95471
Christine Krebill
Radio
EMC Test Data
For The
Intel Corporation
Product
7265D2W
Date of Last Test: 7/10/2014
R95717
Cover
Page 25
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Power vs. Data Rate
In normal operating modes the card uses power settings stored on EEPROM to set the output power. For a given nominal output power
the actual transmit power normally is redcued as the data rate increases, therefore testing was performed at the data rate in the mode
wiht highest power to determine compliance with the requirements.
The following power measurements were made using a GATED average power meter and with the device configured in a continuous
transmit mode on Chain 1 at the various data rates in each mode to verify the highest power mode:
Sample Notes
MAC Address: 001500F15B5D DRTU Tool Version 1.7.3-935 Driver version 17.1.0.11
BT Address: 001500F15B61 DRTU Tool Version 1.7.3-935 Driver version 17.1.0.11
Date of Test: 6/5/2014
Test Engineer: John Caizzi
Test Location: Lab 4
Insertion loss of cable = .4 dB at 2.4 GHz.
Mode
802.11b
802.11g
R95717
Data Rate
Power (dBm)
5.5
11
12
18
24
36
48
54
9.7
9.6
9.5
9.4
4.6
4.5
4.5
4.4
4.3
4.3
4.2
4.2
Power & Duty Cycle
Power
setting
7.0
7.0
Page 26
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Mode
802.11n
20MHz
802.11n/ac
40MHz
Note :
R95717
Data Rate
Power (dBm)
HT0
HT1
HT2
HT3
HT4
HT5
HT6
HT7
HT0
HT1
HT2
HT3
HT4
HT5
HT6
HT7
4.6
4.5
4.5
4.4
4.2
4.1
4.2
4.2
4.4
4.3
4.2
4.1
4.0
3.9
3.9
3.9
J94914
T95471
Christine Krebill
N/A
Power
setting
7.0
7.0
Power setting - the software power setting used during testing
testing, included for reference only
only.
Power & Duty Cycle
Page 27
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Duty Cycle
Date of Test: 6/5/14 & 6/12/14
Test Engineer: John Caizzi
Test Location: Lab 4 / Chamber 7
Duty cycle measurements performed on the worse case data rate for power.
Notes: Measurements taken with maximum RBW/VBW settings allowed.
Mode
Data Rate
11b
11g
n20
n40
BT basic
BT EDR
BTLE
HT0
HT0
Duty Cycle Constant
(x)
DC?
0.99
0.99
0.99
0.97
0.77
0.77
0.63
Yes
Yes
Yes
Yes
Yes
Yes
Yes
T (ms)
Pwr Cor
Factor*
2.272
2.06
1.919
0.944
2.906
2.885
0.391
0.0
0.0
0.0
0.1
1.1
1.1
2.0
Lin Volt
Cor
Factor**
0.0
0.0
0.0
0.2
2.2
2.3
3.9
Min VBW
for FS (Hz)
440
485
521
1059
344
347
2558
* Correction factor when using RMS/Power averaging - 10*log(1/x)
** Correction factor when using linear voltage average - 20*log(1/x)
T = Minimum transmission duration
R95717
Power & Duty Cycle
Page 28
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
R95717
Power & Duty Cycle
J94914
T95471
Christine Krebill
N/A
Page 29
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
R95717
Power & Duty Cycle
J94914
T95471
Christine Krebill
N/A
Page 30
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
R95717
Power & Duty Cycle
J94914
T95471
Christine Krebill
N/A
Page 31
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
R95717
Power & Duty Cycle
J94914
T95471
Christine Krebill
N/A
Page 32
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
R95717
Power & Duty Cycle
J94914
T95471
Christine Krebill
N/A
Page 33
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
R95717
Power & Duty Cycle
J94914
T95471
Christine Krebill
N/A
Page 34
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
R95717
Power & Duty Cycle
J94914
T95471
Christine Krebill
N/A
Page 35
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
R95717
Power & Duty Cycle
J94914
T95471
Christine Krebill
N/A
Page 36
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
R95717
Power & Duty Cycle
J94914
T95471
Christine Krebill
N/A
Page 37
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
R95717
Power & Duty Cycle
J94914
T95471
Christine Krebill
N/A
Page 38
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
R95717
Power & Duty Cycle
J94914
T95471
Christine Krebill
N/A
Page 39
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
RSS 210 and FCC 15.247 (DTS) Antenna Port Measurements
Power, PSD, Bandwidth and Spurious Emissions
Test Specific Details
Objective:
The objective of this test session is to perform final qualification testing of the EUT with respect to the
specification listed above.
Date of Test: 6/18/2014
Test Engineer: John Caizzi / Jack Liu
Test Location: Lab 4A
Config. Used: 1
Config Change: none
EUT Voltage: 3.3Vdc
General Test Configuration
The EUT was connected to the spectrum analyzer or power meter via a suitable attenuator. All measurements were made on a single
chain.
All measurements have been corrected to allow for the external attenuators used.
Ambient Conditions:
Temperature:
Rel. Humidity:
18-20 °C
30-35 %
Summary of Results
Test Performed
Limit
Pass / Fail
Output Power
15.247(b)
Pass
Power spectral Density (PSD)
Minimum 6dB Bandwidth
99% Bandwidth
Spurious emissions
15.247(d)
15.247(a)
RSS GEN
15.247(b)
Pass
Pass
Pass
Run #
Pwr setting
Avg Pwr
Result / Margin
b mode: 18.2 dBm
g mode: 20.4 dBm
n20 mode: 21.2 dBm
n40 mode: 20.6 dBm
1.1 dBm/10kHz
10.043 MHz
36.16 MHz
All emissions < -20 dBc
Modifications Made During Testing
No modifications were made to the EUT during testing
Deviations From The Standard
No deviations were made from the requirements of the standard.
Procedure Comments:
Measurements performed in accordance with FCC KDB 558074
R95717
2.4GHz DTS Antenna - Chain A
Page 40
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Mode
Data Rate
11b
11g
n20
n40
HT0
HT0
Duty Cycle Constant
(x)
DC?
0.99
0.99
0.99
0.97
Yes
Yes
Yes
Yes
T (ms)
Pwr Cor
Factor*
2.272
2.06
1.919
0.944
0.0
0.0
0.0
0.1
Lin Volt
Cor
Factor**
0.0
0.0
0.0
0.2
J94914
T95471
Christine Krebill
N/A
Min VBW
for FS (Hz)
440
485
521
1059
Sample Notes
MAC Address: 001500F15B5D DRTU Tool Version 1.7.3-935 Driver version 17.1.0.11
R95717
2.4GHz DTS Antenna - Chain A
Page 41
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #1: Output Power
Mode:
Power
Setting2
14.5
15.0
14.0
11b
Mode:
Power
Setting2
17.0
21.0
15.0
11g
Mode:
Power
Setting2
17.0
22.0
15.0
n20
Mode:
Power
Setting2
16.5
21.0
15.5
n40
Note 1:
Note 2:
Note 3:
R95717
Frequency (MHz)
2412
2442
2462
Frequency (MHz)
2412
2442
2462
Frequency (MHz)
2412
2442
2462
Frequency (MHz)
2422
2437
2452
Output Power
mW
(dBm) 1
17.6
57.5
18.2
66.1
17.5
56.2
Antenna
Gain (dBi)
3.2
3.2
3.2
Output Power
mW
(dBm) 1
17.1
51.3
20.4
109.6
15.5
35.5
Antenna
Gain (dBi)
3.2
3.2
3.2
Output Power
mW
(dBm) 1
17.1
51.3
21.2
131.8
15.5
35.5
Antenna
Gain (dBi)
3.2
3.2
3.2
Output Power
mW
(dBm) 1
15.6
36.3
20.6
114.8
14.9
30.9
Antenna
Gain (dBi)
3.2
3.2
3.2
Result
Pass
Pass
Pass
Result
Pass
Pass
Pass
Result
Pass
Pass
Pass
Result
Pass
Pass
Pass
0.120
0.138
0.117
Output Power
mW
(dBm) 3
16.8
47.9
17.3
53.7
16.7
46.8
0.107
0.229
0.074
Output Power
mW
(dBm) 3
14.2
26.3
17.5
56.2
12.8
19.1
0.107
0.275
0.074
Output Power
mW
(dBm) 3
14.1
25.7
17.7
58.9
12.6
18.2
0.076
0.240
0.065
Output Power
mW
(dBm) 3
13.5
22.4
16.7
46.8
12.8
19.1
EIRP
dBm
20.8
21.4
20.7
EIRP
dBm
20.3
23.6
18.7
EIRP
dBm
20.3
24.4
18.7
EIRP
dBm
18.8
23.8
18.1
Output power measured using a peak power meter, spurious limit is -20dBc.
Power setting - the software power setting used during testing, included for reference only.
Power measured using average power meter (non-gated) and is included for reference only.
2.4GHz DTS Antenna - Chain A
Page 42
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #2: Power spectral Density
Mode:
Power
Setting
14.5
15.0
14.0
11b
Mode:
Power
Setting
17.0
21.0
15.0
11g
Mode:
Power
Setting
17
17.00
23.0
15.0
n20
Mode:
Power
Setting
16.5
23.0
15.5
n40
Note 1:
R95717
Frequency (MHz)
2412
2442
2462
Frequency (MHz)
2412
2442
2462
Frequency (MHz)
2412
2442
2462
Frequency (MHz)
2422
2437
2452
PSD
(dBm/10kHz) Note 1
0.5
1.1
0.2
Result
Limit
dBm/3kHz
8.0
Pass
8.0
Pass
8.0
Pass
PSD
(dBm/10kHz) Note 1
-5.3
-2.4
-8.5
Limit
dBm/3kHz
8.0
8.0
8.0
Result
PSD
(dBm/10kHz) Note 1
52
-5.2
-1.0
-8.1
Limit
dBm/3kHz
88.00
8.0
8.0
Result
PSD
(dBm/10kHz) Note 1
-10.0
-4.0
-9.7
Limit
dBm/3kHz
8.0
8.0
8.0
Result
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Test performed per method PKSPD, in KDB 558074. Power spectral density measured using: 3kHz ≤ RBW ≤ 100kHz,
VBW=3*RBW, peak detector, span = 1.5*DTS BW, auto sweep time, max hold.
2.4GHz DTS Antenna - Chain A
Page 43
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
R95717
2.4GHz DTS Antenna - Chain A
J94914
T95471
Christine Krebill
N/A
Page 44
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #3: Signal Bandwidth
Mode:
Mode:
Mode:
Mode:
Note 1:
R95717
11b
Power
Setting
15.0
Frequency (MHz)
11g
Power
Setting
20.5
Frequency (MHz)
n20
Power
Setting
21.0
Frequency (MHz)
n40
Power
Setting
17.5
Frequency (MHz)
2442
2442
2442
2442
Bandwidth (MHz)
6dB
99%
10.043
12.43
RBW Setting (kHz)
6dB
99%
100
300
Bandwidth (MHz)
6dB
99%
15.135
16.81
RBW Setting (MHz)
6dB
99%
100
300
Bandwidth (MHz)
6dB
99%
15.125
18.17
RBW Setting (MHz)
6dB
99%
100
300
Bandwidth (MHz)
6dB
99%
35.132
36.16
RBW Setting (MHz)
6dB
99%
100
470
DTS BW: RBW=100kHz, VBW ≥ 3*RBW, peak detector, max hold, auto sweep time.
99% BW: RBW=1-5% of of 99%BW, VBW ≥ 3*RBW, peak detector, max hold, auto sweep time.
2.4GHz DTS Antenna - Chain A
Page 45
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #4a: Out of Band Spurious Emissions
Date of Test: 6/17/2014
Test Engineer: Jack Liu
Test Location: FT Lab# 4A
Mode: 802.11b
Power
Frequency (MHz)
Setting
2412
14.5
2442
15.0
2462
14.0
J94914
T95471
Christine Krebill
N/A
Config. Used: 1
Config Change: None
EUT Voltage: 3.3Vdc
Mode
Limit
Result
-30dBc
-30dBc
-30dBc
Pass
Pass
Pass
Plots for low channel
R95717
2.4GHz DTS Antenna - Chain A
Page 46
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Additional plot showing compliance with -30dBc limit from 2390 MHz to 2400 MHz. Radiated measurements used to show compliance
with the limits in the restricted band below 2390 MHz.
Plots for center channel
R95717
2.4GHz DTS Antenna - Chain A
Page 47
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Plots for high channel
R95717
2.4GHz DTS Antenna - Chain A
Page 48
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #4b: Out of Band Spurious Emissions
Date of Test: 6/17/2014
Test Engineer: Jack Liu, M. Birgani
Test Location: FT Lab# 4A
J94914
T95471
Christine Krebill
N/A
Config. Used: 1
Config Change: None
EUT Voltage: 3.3Vdc
Mode: 802.11g
Frequency (MHz)
2412
2442
2462
Power
Setting
17.0
21.0
15.0
Mode
Limit
Result
-20dBc
-20dBc
-20dBc
Pass
Pass
Pass
Plots for low channel
R95717
2.4GHz DTS Antenna - Chain A
Page 49
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Additional plot showing compliance with -20dBc limit from 2390 MHz to 2400 MHz. Radiated measurements used to show compliance
with the limits in the restricted band below 2390 MHz.
Plots for center channel
R95717
2.4GHz DTS Antenna - Chain A
Page 50
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Plots for high channel
R95717
2.4GHz DTS Antenna - Chain A
Page 51
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #4c: Out of Band Spurious Emissions
Date of Test: 6/17/2014
Test Engineer: M. Birgani
Test Location: FT Lab# 4A
J94914
T95471
Christine Krebill
N/A
Config. Used: 1
Config Change: None
EUT Voltage: 3.3Vdc
Mode: 802.11n20
Frequency (MHz)
2412
2442
2462
Power
Setting
17.0
23.0
15.0
Mode
Limit
Result
n20
n20
n20
-20dBc
-20dBc
-20dBc
Pass
Pass
Pass
Plots for low channel
R95717
2.4GHz DTS Antenna - Chain A
Page 52
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Additional plot showing compliance with -20dBc limit from 2390 MHz to 2400 MHz. Radiated measurements used to show compliance
with the limits in the restricted band below 2390 MHz.
Plots for center channel
R95717
2.4GHz DTS Antenna - Chain A
Page 53
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Plots for high channel
R95717
2.4GHz DTS Antenna - Chain A
Page 54
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #4d: Out of Band Spurious Emissions
Date of Test: 6/17/2014
Test Engineer: M. Birgani
Test Location: FT Lab# 4A
J94914
T95471
Christine Krebill
N/A
Config. Used: 1
Config Change: None
EUT Voltage: 3.3Vdc
Mode: 802.11n40
Frequency (MHz)
2422
2437
2452
Power
Setting
16.5
23.0
15.5
Mode
Limit
Result
n40
n40
n40
-20dBc
-20dBc
-20dBc
Pass
Pass
Pass
Plots for low channel
R95717
2.4GHz DTS Antenna - Chain A
Page 55
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Additional plot showing compliance with -30dBc limit from 2390 MHz to 2400 MHz. Radiated measurements used to show compliance
with the limits in the restricted band below 2390 MHz.
Plots for center channel
R95717
2.4GHz DTS Antenna - Chain A
Page 56
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Plots for high channel
R95717
2.4GHz DTS Antenna - Chain A
Page 57
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
RSS 210 and FCC 15.247 (DTS) Antenna Port Measurements
Power, PSD, Bandwidth and Spurious Emissions
Test Specific Details
Objective:
The objective of this test session is to perform final qualification testing of the EUT with respect to the
specification listed above.
Config. Used: 1
Config Change: none
EUT Voltage: 3.3Vdc
Date of Test: 6/18/2014
Test Engineer: John Caizzi / Jack Liu
Test Location: Lab 4A
General Test Configuration
The EUT was connected to the spectrum analyzer or power meter via a suitable attenuator. All measurements were made on a single
chain.
All measurements have been corrected to allow for the external attenuators used.
Ambient Conditions:
Temperature:
Rel. Humidity:
24 °C
38 %
Summary of Results
Test Performed
Limit
Pass / Fail
Output Power
15.247(b)
Pass
Power spectral Density (PSD)
Minimum 6dB Bandwidth
99% Bandwidth
Spurious emissions
15.247(d)
15.247(a)
RSS GEN
15.247(b)
Pass
Pass
Pass
Run #
Pwr setting
Avg Pwr
Result / Margin
b mode: 18.3 dBm
g mode: 20.2 dBm
n20 mode: 20.8 dBm
n40 mode: 19.7 dBm
1.3 dBm/10kHz
10.043 MHz
36.33 MHz
All emissions < -20 dBc
Modifications Made During Testing
No modifications were made to the EUT during testing
Deviations From The Standard
No deviations were made from the requirements of the standard.
R95717
2.4GHz DTS Antenna - Chain B
Page 58
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Procedure Comments:
Measurements performed in accordance with FCC KDB 558074
Mode
11b
11g
n20
n40
Duty Cycle Constant
Data Rate
(x)
DC?
HT0
HT0
0.99
0.99
0.99
0.97
Yes
Yes
Yes
Yes
T (ms)
Pwr Cor
Factor*
2.272
2.06
1.919
0.944
0.0
0.0
0.0
0.1
Lin Volt
Cor
Factor**
0.0
0.0
0.0
0.2
Min VBW
for FS (Hz)
440
485
521
1059
Sample Notes
MAC Address: 001500F15B5D DRTU Tool Version 1.7.3-935 Driver version 17.1.0.11
R95717
2.4GHz DTS Antenna - Chain B
Page 59
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #1: Output Power
Mode:
Power
Setting2
21.5
22.0
21.0
11b
Mode:
Power
Setting2
24.0
27.0
21.5
11g
Mode:
Power
Setting2
24.0
29.0
22.0
n20
Mode:
Power
Setting2
21.5
25.0
20.5
n40
Note 1:
Note 2:
Note 3:
R95717
Frequency (MHz)
2412
2442
2462
Frequency (MHz)
2412
2442
2462
Frequency (MHz)
2412
2442
2462
Frequency (MHz)
2422
2442
2452
Output Power
mW
(dBm) 1
18.3
67.6
18.2
66.1
17.8
60.3
Antenna
Gain (dBi)
3.2
3.2
3.2
Output Power
mW
(dBm) 1
18.2
66.1
20.2
104.7
15.5
35.5
Antenna
Gain (dBi)
3.2
3.2
3.2
O t tP
Output
Power
mW
(dBm) 1
18.3
67.6
20.8
120.2
16.1
40.7
A t
Antenna
Gain (dBi)
3.2
3.2
3.2
Output Power
mW
(dBm) 1
14.7
29.5
19.5
89.1
14.1
25.7
Antenna
Gain (dBi)
3.2
3.2
3.2
Result
Pass
Pass
Pass
Result
Pass
Pass
Pass
Result
Pass
Pass
Pass
Result
Pass
Pass
Pass
EIRP
dBm
21.5
21.4
21.0
0.141
0.138
0.126
Output Power
mW
(dBm) 3
16.6
45.7
17.7
58.9
16.6
45.7
0.138
0.219
0.074
Output Power
mW
(dBm) 3
14.6
28.8
17.3
53.7
12.4
17.4
0.141
0.251
0.085
O t tP
Output
Power
mW
(dBm) 3
14.8
30.2
17.4
55.0
12.8
19.1
0.062
0.186
0.054
Output Power
mW
(dBm) 3
13.5
22.4
15.2
33.1
11.4
13.8
EIRP
dBm
21.4
23.4
18.7
EIRP
dBm
21.5
24.0
19.3
EIRP
dBm
17.9
22.7
17.3
Output power measured using a peak power meter, spurious limit is -20dBc.
Power setting - the software power setting used during testing, included for reference only.
Power measured using average power meter (non-gated) and is included for reference only.
2.4GHz DTS Antenna - Chain B
Page 60
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #2: Power spectral Density
Mode:
Power
Setting
21.5
22.0
21.0
11b
Mode:
Power
Setting
24.0
27.0
21.5
11g
Mode:
Power
Setting
24
24.00
29.0
22.0
n20
Mode:
Power
Setting
21.5
28.0
20.5
n40
Note 1:
R95717
Frequency (MHz)
2412
2442
2462
Frequency (MHz)
2412
2442
2462
Frequency (MHz)
2412
2442
2462
Frequency (MHz)
2422
2442
2452
PSD
(dBm/10kHz) Note 1
1.3
1.2
0.5
Limit
dBm/3kHz
8.0
8.0
8.0
Result
PSD
(dBm/10kHz) Note 1
-4.4
-3.2
-7.1
Limit
dBm/3kHz
8.0
8.0
8.0
Result
PSD
(dBm/10kHz) Note 1
51
-5.1
-1.7
-7.7
Limit
dBm/3kHz
88.00
8.0
8.0
Result
PSD
(dBm/10kHz) Note 1
-9.3
-5.6
-11.3
Limit
dBm/3kHz
8.0
8.0
8.0
Result
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Test performed per method PKSPD, in KDB 558074. Power spectral density measured using: 3kHz ≤ RBW ≤ 100kHz,
VBW=3*RBW, peak detector, span = 1.5*DTS BW, auto sweep time, max hold.
2.4GHz DTS Antenna - Chain B
Page 61
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
R95717
2.4GHz DTS Antenna - Chain B
J94914
T95471
Christine Krebill
N/A
Page 62
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #3: Signal Bandwidth
Mode:
Mode:
Mode:
Mode:
Note 1:
R95717
11b
Power
Setting
22.0
Frequency (MHz)
11g
Power
Setting
27.0
Frequency (MHz)
n20
Power
Setting
29.0
Frequency (MHz)
n40
Power
Setting
28.0
Frequency (MHz)
2442
2442
2442
2442
Bandwidth (MHz)
6dB
99%
10.043
12.47
RBW Setting (kHz)
6dB
99%
100
300
Bandwidth (MHz)
6dB
99%
15.125
16.92
RBW Setting (MHz)
6dB
99%
100
300
Bandwidth (MHz)
6dB
99%
15.125
19.15
RBW Setting (MHz)
6dB
99%
100
300
Bandwidth (MHz)
6dB
99%
35.078
36.33
RBW Setting (MHz)
6dB
99%
100
510
DTS BW: RBW=100kHz, VBW ≥ 3*RBW, peak detector, max hold, auto sweep time.
99% BW: RBW=1-5% of of 99%BW, VBW ≥ 3*RBW, peak detector, max hold, auto sweep time.
2.4GHz DTS Antenna - Chain B
Page 63
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #4a: Out of Band Spurious Emissions
Mode: 802.11b
Frequency (MHz)
2412
2442
2462
Power
Setting
21.5
22.0
21.0
Mode
Limit
Result
-20dBc
-20dBc
-20dBc
Pass
Pass
Pass
Plots for low channel
R95717
2.4GHz DTS Antenna - Chain B
Page 64
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Additional plot showing compliance with -20dBc limit from 2390 MHz to 2400 MHz. Radiated measurements used to show compliance
with the limits in the restricted band below 2390 MHz.
Plot for center channel
R95717
2.4GHz DTS Antenna - Chain B
Page 65
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Plot for high channel
R95717
2.4GHz DTS Antenna - Chain B
Page 66
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #4b: Out of Band Spurious Emissions
Mode: 802.11g
Frequency (MHz)
2412
2442
2462
Power
Setting
27.0
27.0
21.5
Mode
Limit
Result
-20dBc
-20dBc
-20dBc
Pass
Pass
Pass
Plots for low channel
R95717
2.4GHz DTS Antenna - Chain B
Page 67
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Additional plot showing compliance with -20dBc limit from 2390 MHz to 2400 MHz. Radiated measurements used to show compliance
with the limits in the restricted band below 2390 MHz.
Plots for center channel
R95717
2.4GHz DTS Antenna - Chain B
Page 68
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Plots for high channel
R95717
2.4GHz DTS Antenna - Chain B
Page 69
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #4c: Out of Band Spurious Emissions
Mode: 802.11n20
Frequency (MHz)
2412
2442
2462
Power
Setting
29.0
29.0
22.0
Mode
Limit
Result
n20
n20
n20
-20dBc
-20dBc
-20dBc
Pass
Pass
Pass
Plot for low channel
R95717
2.4GHz DTS Antenna - Chain B
Page 70
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Additional plot showing compliance with -20dBc limit from 2390 MHz to 2400 MHz. Radiated measurements used to show compliance
with the limits in the restricted band below 2390 MHz.
Plot for center channel
R95717
2.4GHz DTS Antenna - Chain B
Page 71
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Plot for high channel
R95717
2.4GHz DTS Antenna - Chain B
Page 72
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #4d: Out of Band Spurious Emissions
Mode: 802.11n40
Frequency (MHz)
2422
2442
2452
Power
Setting
28.0
28.0
20.5
Mode
Limit
Result
n40
n40
n40
-20dBc
-20dBc
-20dBc
Pass
Pass
Pass
Plot for low channel
R95717
2.4GHz DTS Antenna - Chain B
Page 73
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Additional plot showing compliance with -20dBc limit from 2390 MHz to 2400 MHz. Radiated measurements used to show compliance
with the limits in the restricted band below 2390 MHz.
Plots for center channel
R95717
2.4GHz DTS Antenna - Chain B
Page 74
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Plots for high channel
R95717
2.4GHz DTS Antenna - Chain B
Page 75
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
RSS 210 and FCC 15.247 (DTS) Antenna Port Measurements
Power, PSD, Bandwidth and Spurious Emissions
Test Specific Details
Objective:
The objective of this test session is to perform final qualification testing of the EUT with respect to the
specification listed above.
Date of Test: 6/18/2014
Test Engineer: J. Liu, M. Birgani
Test Location: Lab 4A
Config. Used: 1
Config Change: none
EUT Voltage: 3.3Vdc
General Test Configuration
The EUT was connected to the spectrum analyzer or power meter via a suitable attenuator. All measurements were made on a single
chain.
All measurements have been corrected to allow for the external attenuators used.
Ambient Conditions:
Temperature:
Rel. Humidity:
24 °C
38 %
R lt
Summary
off Results
Test Performed
Limit
Pass / Fail
Output Power
15.247(b)
Pass
Power spectral Density (PSD)
15.247(d)
Pass
Minimum 6dB Bandwidth
99% Bandwidth
Spurious emissions
15.247(a)
RSS GEN
15.247(b)
Run #
Pwr setting
Avg Pwr
Result / Margin
n20: 22.8 dBm
n40: 21.8 dBm
n20: 0.6dBm/10kHz
n40: -2.7 dBm/10kHz
These measurements
are covered by the
single chain data
Modifications Made During Testing
No modifications were made to the EUT during testing
Deviations From The Standard
No deviations were made from the requirements of the standard.
R95717
2.4GHz DTS Antenna MIMO
Page 76
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Procedure Comments:
Measurements performed in accordance with FCC KDB 558074
Mode
n20
n40
Duty Cycle Constant
Data Rate
(x)
DC?
HT0
HT0
0.99
0.97
Yes
Yes
T (ms)
Pwr Cor
Factor*
1.919
0.944
0.0
0.1
Lin Volt
Cor
Factor**
0.0
0.2
Min VBW
for FS (Hz)
521
1059
Sample Notes
MAC Address: 001500F15B5D DRTU Tool Version 1.7.3-935 Driver version 17.1.0.11
Antenna Gain Information
Antenna Gain (dBi) / Chain
Freq
24003.2
3.2
2483.5
For devices that support CDD modes
Min # of spatial streams:
Max # of spatial streams:
Notes:
Notes:
R95717
BF
MultiChain
Legacy
CDD
Sectorized
/ Xpol
Dir G
(PWR)
Dir G
(PSD)
No
No
Yes
No
3.2
6.2
BF = beamforming mode supported, Multichain Legacy = 802.11 legacy data rates supported for multichain transmissions,
CDD = Cyclic Delay Diversity (or Cyclic Shift Diversity) modes supported, Sectorized / Xpol = antennas are sectorized or
cross polarized.
Dir G (PWR) = total gain (Gant + Array Gain) for power calculations; Dir G (PSD) = total gain for PSD calculations Both are
based on FCC KDB 662911. Depending on the modes supported, the Array Gain value for power could be different from the
PSD value.
2.4GHz DTS Antenna MIMO
Page 77
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #1: Output Power
Operating Mode: 802.11n20
Directional Gain (dBi):
3.2
Frequency
(MHz)
2412
2442
2462
Chain
Software
Setting
16.0
21.5
23.0
29.0
16.5
21.0
Power1
dBm
14.3
15.5
19.5
20.1
15.1
14.7
Total Power
mW
dBm
Limit
dBm
62.4
18.0
30.0
191.5
22.8
30.0
61.9
17.9
30.0
Total Power
mW
dBm
Limit
dBm
27.0
14.3
30.0
151.7
21.8
30.0
28.9
14.6
30.0
Max Power
(W)
Result
Power eirp
(W)
Pass
0.191
Pass
0.400
Pass
Power
(dBm)2
12.0
12.2
17.3
17.4
12.0
10.3
Operating Mode: 802.11n40
Directional Gain (dBi):
3.2
Frequency
(MHz)
2422
2437
2452
Note 1:
Note 2:
R95717
Chain
Software
Setting
14
14.00
19.5
23.0
28.0
13.5
19.5
Power1
dBm
11
11.55
11.1
18.8
18.8
11.7
11.5
Max Power
(W)
Result
Power eirp
(W)
Pass
0.152
Pass
Pass
0.317
Power
(dBm)2
99.77
9.6
16.7
16.7
9.4
9.4
Output power measured using a peak power meter, spurious limit is -20dBc.
Power measured using average power meter (non-gated) and is included for reference only.
2.4GHz DTS Antenna MIMO
Page 78
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #2: Power spectral Density
Mode: n20
Power
Frequency (MHz)
Setting
2412
16.0 / 21.5
2442
23.0 / 29.0
2462
16.5 / 21.0
Mode: n40
Power
Frequency (MHz)
Setting
2422
14.0 / 19.5
2437
23.0 / 28.0
2462
13.5 / 19.5
Note 1:
Note 2:
R95717
Chain 1
-9.3
-2.6
-8.7
PSD (dBm/10kHz) Note 1
Chain 2
Chain 3
Chain 4
-7.5
-2.2
-8.1
Total
-5.3
0.6
-5.4
Limit
dBm/3kHz
7.8
7.8
7.8
Chain 1
-12.7
-5.2
-12.4
PSD (dBm/10kHz) Note 1
Chain 2
Chain 3
Chain 4
-14.3
-6.4
-14.0
Total
-10.4
-2.7
-10.1
Limit
dBm/3kHz
7.8
7.8
7.8
Result
Pass
Pass
Pass
Result
Pass
Pass
Pass
Test performed per method PKSPD, in KDB 558074. Power spectral density measured using: 3kHz ≤ RBW ≤ 100kHz,
VBW=3*RBW, peak detector, span = 1.5*DTS BW, auto sweep time, max hold.
Power setting - if a single number the same power setting was used for each chain. If multiple numbers the power setting for
(e g x,y
x y would indicate power setting x for chain 11, power setting y for chain 2.
each chain is separated by a comma (e.g.
2.4GHz DTS Antenna MIMO
Page 79
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
R95717
2.4GHz DTS Antenna MIMO
J94914
T95471
Christine Krebill
N/A
Page 80
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
RSS 210 and FCC 15.247 (DTS) Radiated Spurious Emissions
Test Specific Details
Objective:
The objective of this test session is to perform final qualification testing of the EUT with respect to the
specification listed above.
General Test Configuration
The EUT and all local support equipment were located on the turntable for radiated spurious emissions testing.
For radiated emissions testing the measurement antenna was located 3 meters from the EUT, unless otherwise noted.
Ambient Conditions:
Temperature:
Rel. Humidity:
25 °C
30 %
Summary of Results - Device Operating in the 2400-2483.5 MHz Band
Run #
R95717
Mode
n20
Channel
12412MHz
11 2462MHz
12412MHz
22417MHz
10 2457MHz
11 2462MHz
12412MHz
22417MHz
10 2457MHz
11 2462MHz
Target
Power
Power
Setting
16 5
16.5
14 5
14.5
16.5
14.0
14.0
17.0
15.5
18.5
15.5
18.5
12.5
15.0
14.0
17.0
15.5
19.0
15.5
18.5
12.5
15.0
Test Performed
Limit
Restricted Band Edge
(2390 MHz)
Restricted Band Edge
(2483.5 MHz)
Restricted Band Edge
(2390 MHz)
FCC Part 15.209 /
15.247( c)
Restricted Band Edge
(2483.5 MHz)
Restricted Band Edge
(2390 MHz)
FCC Part 15.209 /
15.247( c)
Restricted Band Edge
(2483.5 MHz)
2.4GHz Wifi BE RE - Chain A
Result / Margin
47.9 dBµV/m @ 2385.4
MHz (-6.1 dB)
48.6 dBµV/m @ 2488.8
MHz (-5.4 dB)
47.8 dBµV/m @ 2390.0
MHz (-6.2 dB)
47.5 dBµV/m @ 2390.0
MHz (-6.5 dB)
47.6 dBµV/m @ 2483.6
MHz (-6.4 dB)
45.3 dBµV/m @ 2483.5
MHz (-8.7 dB)
48.2 dBµV/m @ 2390.0
MHz (-5.8 dB)
48.8 dBµV/m @ 2390.0
MHz (-5.2 dB)
48.9 dBµV/m @ 2483.5
MHz (-5.1 dB)
47.1 dBµV/m @ 2483.5
MHz (-6.9 dB)
Page 81
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
n40
n40
n40
n40
n40
32422MHz
42427MHz 72442MHz
82447MHz
92452MHz
13.5
13.5
14.5
14.4
14.5
14.5
13.5
13.7
12.5
12.8
Restricted Band Edge
(2390 MHz)
Restricted Band Edge
(2483.5 MHz)
Restricted Band Edge
(2483.5 MHz)
Restricted Band Edge
(2483.5 MHz)
Restricted Band Edge
(2483.5 MHz)
J94914
T95471
Christine Krebill
N/A
52.1 dBµV/m @ 2389.8
MHz (-1.9 dB)
51.5 dBµV/m @ 2483.5
MHz (-2.5 dB)
FCC Part 15.209 / 50.4 dBµV/m @ 2483.5
15.247( c)
MHz (-3.6 dB)
52.4 dBµV/m @ 2483.5
MHz (-1.6 dB)
52.3 dBµV/m @ 2483.5
MHz (-1.7 dB)
Modifications Made During Testing
No modifications were made to the EUT during testing
Deviations From The Standard
No deviations were made from the requirements of the standard.
Sample Notes
MAC Address: 001500F15B5D DRTU Tool Version 1.7.3-935 Driver version 17.1.0.11
Antenna: Skycross WiMax/WLAN
R95717
2.4GHz Wifi BE RE - Chain A
Page 82
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Procedure Comments:
Measurements performed in accordance with FCC KDB 558074
Peak measurements performed with: RBW=1MHz, VBW=3MHz, peak detector, max hold, auto sweep time
Unless otherwise stated/noted, emission has duty cycle ≥ 98% and was measured using RBW=1MHz, VBW=10Hz, peak detector, linear
average mode, auto sweep time, max hold.
Mode
Data Rate
11b
11g
n20
n40
HT0
HT0
Duty Cycle Constant
(x)
DC?
0.99
0.99
0.99
0.97
Yes
Yes
Yes
Yes
T (ms)
Pwr Cor
Factor*
2.272
2.06
1.919
0.944
0.0
0.0
0.0
0.1
Lin Volt
Cor
Factor**
0.0
0.0
0.0
0.2
Min VBW
for FS (Hz)
440
485
521
1059
Measurement Specific Notes:
Note 1:
Note 2:
N t 3:
Note
Note 4:
R95717
Emission in non-restricted band, but limit of 15.209 used.
Emission in non-restricted band, the limit was set 20dB below the level of the fundamental and measured in 100kHz.
Emission has duty cycle < 98%, but constant, average measurement performed: RBW=1MHz,
RBW 1MHz, VBW=10Hz,
VBW 10Hz, peak detector,
linear averaging, auto sweep, trace average 100 traces, measurement corrected by Linear Voltage correction factor
Plots of the average bandedge do not account for any duty cycle correction. Refer to the tabular results for final
measurements.
2.4GHz Wifi BE RE - Chain A
Page 83
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #1: Radiated Bandedge Measurements
Date of Test: 6/6/2014 0:00
Test Engineer: John Caizzi
Test Location: Chamber 7
Channel:
Tx Chain:
Config. Used: 1
Config Change: none
EUT Voltage: 3.3 VDC
Mode:
Data Rate:
Target (dBm)
16.5
Power Settings
Measured (dBm)
16.8
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Frequency
Level
Pol
Detector
Azimuth
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
278
2385.270
47.1
54.0
-6.9
278
2379.820
52.9
74.0
-21.1
PK
AVG
308
2385.350
47.9
54.0
-6.1
2385 510
53 8
74 0
-20
308
2385.510
53.8
74.0
20.22
PK
R95717
2.4GHz Wifi BE RE - Chain A
Software Setting
14.5
Height
meters
1.04
1.04
1.00
1 00
1.00
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 84
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
11
Mode:
Data Rate:
Target (dBm)
16.5
Power Settings
Measured (dBm)
16.7
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
279
2488.720
46.5
54.0
-7.5
279
2485.880
52.8
74.0
-21.2
PK
AVG
252
2488.760
48.6
54.0
-5.4
252
2485.720
54.6
74.0
-19.4
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain A
Software Setting
14.0
Height
meters
1.11
1.11
1.12
1.12
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 85
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #2: Radiated Bandedge Measurements
Date of Test: 6/6/2014 0:00
Test Engineer: John Caizzi
Test Location: Chamber 7
Channel:
Tx Chain:
Config. Used: 1
Config Change: none
EUT Voltage: 3.3 VDC
Mode:
Data Rate:
Target (dBm)
14.0
Power Settings
Measured (dBm)
14.2
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
282
2390.000
46.2
54.0
-7.8
282
2389.280
58.0
74.0
-16.0
PK
AVG
249
2390.000
47.8
54.0
-6.2
2389 920
59 9
74 0
-14
249
2389.920
59.9
74.0
14.11
PK
R95717
2.4GHz Wifi BE RE - Chain A
Software Setting
17.0
Height
meters
1.00
1.00
1.46
1 46
1.46
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 86
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
Mode:
Data Rate:
Target (dBm)
15.5
Power Settings
Measured (dBm)
15.5
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
282
2390.000
45.9
54.0
-8.1
282
2387.350
60.6
74.0
-13.4
PK
AVG
249
2390.000
47.5
54.0
-6.5
249
2384.790
60.5
74.0
-13.5
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain A
Software Setting
18.5
Height
meters
1.00
1.00
1.45
1.45
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 87
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
10
Mode:
Data Rate:
Target (dBm)
15.5
Power Settings
Measured (dBm)
15.8
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
215
2483.500
45.8
54.0
-8.2
215
2485.550
59.7
74.0
-14.3
PK
AVG
230
2483.570
47.6
54.0
-6.4
230
2485.880
62.3
74.0
-11.7
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain A
Software Setting
18.5
Height
meters
1.60
1.60
1.57
1.57
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 88
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
11
Mode:
Data Rate:
Target (dBm)
12.5
Power Settings
Measured (dBm)
12.8
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
225
2483.570
44.6
54.0
-9.4
225
2484.130
58.1
74.0
-15.9
PK
AVG
230
2483.500
45.3
54.0
-8.7
230
2485.320
58.7
74.0
-15.3
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain A
Software Setting
15.0
Height
meters
1.59
1.59
1.57
1.57
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 89
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #3: Radiated Bandedge Measurements
Date of Test: 6/6/2014 0:00
Test Engineer: John Caizzi
Test Location: Chamber 7
Channel:
Tx Chain:
Config. Used: 1
Config Change: none
EUT Voltage: 3.3 VDC
Mode:
Data Rate:
n20
HT0
Target (dBm)
14.0
Power Settings
Measured (dBm)
14.1
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
278
2390.000
45.1
54.0
-8.9
278
2384.630
58.4
74.0
-15.6
PK
AVG
248
2390.000
48.2
54.0
-5.8
2389 760
62 9
74 0
-11
248
2389.760
62.9
74.0
11.11
PK
R95717
2.4GHz Wifi BE RE - Chain A
Software Setting
17.0
Height
meters
1.00
1.00
1.44
1 44
1.44
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 90
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
Mode:
Data Rate:
n20
HT0
Target (dBm)
15.5
Power Settings
Measured (dBm)
15.8
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
278
2390.000
48.0
54.0
-6.0
278
2389.920
59.8
74.0
-14.2
PK
AVG
244
2390.000
48.8
54.0
-5.2
244
2389.120
62.2
74.0
-11.8
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain A
Software Setting
19.0
Height
meters
1.00
1.00
1.00
1.00
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 91
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
10
Mode:
Data Rate:
n20
HT0
Target (dBm)
15.5
Power Settings
Measured (dBm)
15.7
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
279
2483.500
46.6
54.0
-7.4
279
2483.930
61.1
74.0
-12.9
PK
AVG
252
2483.530
48.9
54.0
-5.1
252
2483.960
62.7
74.0
-11.3
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain A
Software Setting
18.5
Height
meters
1.13
1.13
1.14
1.14
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 92
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
11
Mode:
Data Rate:
n20
HT0
Target (dBm)
12.5
Power Settings
Measured (dBm)
12.6
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
251
2483.530
47.1
54.0
-6.9
251
2483.900
61.6
74.0
-12.4
PK
AVG
281
2483.570
44.5
54.0
-9.5
281
2485.320
58.0
74.0
-16.0
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain A
Software Setting
15.0
Height
meters
1.11
1.11
1.11
1.11
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 93
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #4: Radiated Bandedge Measurements
Date of Test: 6/6/2014 0:00
Test Engineer: Joseph Cadigal
Test Location: FT Chamber#7
Channel:
Tx Chain:
Config. Used: 1
Config Change: none
EUT Voltage: 3.3 VDC
Mode:
Data Rate:
n40
HT0
Target (dBm)
13.5
Power Settings
Measured (dBm)
13.5
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
304
2389.840
52.1
54.0
-1.9
304
2389.600
62.3
74.0
-11.7
PK
AVG
276
2389.840
48.3
54.0
-5.7
2388 880
59 5
74 0
-14
276
2388.880
59.5
74.0
14.55
PK
R95717
2.4GHz Wifi BE RE - Chain A
Software Setting
16.5
Height
meters
1.2
1.2
1.3
13
1.3
Comments
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
Page 94
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
Mode:
Data Rate:
n40
HT0
Target (dBm)
14.5
Power Settings
Measured (dBm)
14.4
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
304
2483.500
51.5
54.0
-2.5
304
2483.500
62.3
74.0
-11.7
PK
AVG
276
2483.500
48.5
54.0
-5.5
276
2483.500
58.6
74.0
-15.4
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain A
Software Setting
17.5
Height
meters
1.2
1.2
1.1
1.1
Comments
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
Page 95
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
Mode:
Data Rate:
n40
HT0
Target (dBm)
14.5
Power Settings
Measured (dBm)
14.5
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
274
2483.500
50.4
54.0
-3.6
274
2483.930
60.7
74.0
-13.3
PK
AVG
299
2483.500
48.0
54.0
-6.0
299
2483.730
59.8
74.0
-14.2
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain A
Software Setting
17.5
Height
meters
1.1
1.1
1.0
1.0
Comments
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
Page 96
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
Mode:
Data Rate:
n40
HT0
Target (dBm)
13.5
Power Settings
Measured (dBm)
13.7
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
194
2483.530
52.4
54.0
-1.6
194
2484.100
65.4
74.0
-8.6
PK
AVG
275
2483.530
51.5
54.0
-2.5
275
2483.670
62.0
74.0
-12.0
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain A
Software Setting
16.5
Height
meters
1.0
1.0
1.1
1.1
Comments
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
Page 97
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
Mode:
Data Rate:
n40
HT0
Target (dBm)
12.5
Power Settings
Measured (dBm)
12.8
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
303
2483.500
52.3
54.0
-1.7
303
2484.530
64.9
74.0
-9.1
PK
AVG
282
2483.500
51.5
54.0
-2.5
282
2484.100
63.4
74.0
-10.6
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain A
Software Setting
15.5
Height
meters
1.2
1.2
1.2
1.2
Comments
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
Page 98
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
RSS 210 and FCC 15.247 (DTS) Radiated Spurious Emissions
Test Specific Details
Objective:
The objective of this test session is to perform final qualification testing of the EUT with respect to the
specification listed above.
General Test Configuration
The EUT and all local support equipment were located on the turntable for radiated spurious emissions testing.
For radiated emissions testing the measurement antenna was located 3 meters from the EUT, unless otherwise noted.
Ambient Conditions:
Temperature:
Rel. Humidity:
25 °C
30 %
Summary of Results - Device Operating in the 2400-2483.5 MHz Band
Run #
R95717
Mode
Channel
12412MHz
11 2462MHz
12412MHz
22417MHz
10 2457MHz
11 2462MHz
Target
Power
Power
Setting
16 5
16.5
21 5
21.5
16.5
21.0
14.5
24.0
15.5
25.0
15.5
25.0
12.5
21.5
Test Performed
Limit
Result / Margin
FCC Part 15.209 /
15.247( c)
47.9 dBµV/m @ 2389.3
MHz (-6.1 dB)
47.1 dBµV/m @ 2488.8
MHz (-6.9 dB)
48.0 dBµV/m @ 2390.0
MHz (-6.0 dB)
47.8 dBµV/m @ 2390.0
MHz (-6.2 dB)
46.2 dBµV/m @ 2483.5
MHz (-7.8 dB)
46.1 dBµV/m @ 2483.5
MHz (-7.9 dB)
Restricted Band Edge
(2390 MHz)
Restricted Band Edge
(2483.5 MHz)
Restricted Band Edge
(2390 MHz)
Restricted Band Edge
(2483.5 MHz)
2.4GHz Wifi BE RE - Chain B
Page 99
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
n20
n40
12412MHz
22417MHz
10 2457MHz
11 2462MHz
32422MHz
42427MHz 62437MHz
72442MHz
82447MHz
92452MHz
14.5
24.0
15.5
25.0
15.5
25.5
12.5
22.0
13.5
21.5
14.5
22.5
16.5
25.0
13.5
23.0
12.5
22.0
11.5
20.5
Restricted Band Edge
(2390 MHz)
Restricted Band Edge
(2483.5 MHz)
Restricted Band Edge
(2390 MHz)
Restricted Band Edge
(2483.5 MHz)
FCC Part 15.209 /
15.247( c)
J94914
T95471
Christine Krebill
N/A
49.6 dBµV/m @ 2390.0
MHz (-4.4 dB)
47.6 dBµV/m @ 2390.0
MHz (-6.4 dB)
47.2 dBµV/m @ 2483.6
MHz (-6.8 dB)
46.7 dBµV/m @ 2483.5
MHz (-7.3 dB)
53.0 dBµV/m @ 2390.0
MHz (-1.0 dB)
53.5 dBµV/m @ 2390.0
MHz (-0.5 dB)
53.4 dBµV/m @ 2483.5
MHz (-0.6 dB)
51.4 dBµV/m @ 2483.5
MHz (-2.6 dB)
51.8 dBµV/m @ 2483.5
MHz (-2.2 dB)
49.8 dBµV/m @ 2483.5
MHz (-4.2 dB)
Modifications Made During Testing
No modifications were made to the EUT during testing
Deviations From The Standard
No deviations were made from the requirements of the standard.
Sample Notes
MAC Address: 001500F15B5D DRTU Tool Version 1.7.3-935 Driver version 17.1.0.11
Antenna: Skycross WiMax/WLAN
R95717
2.4GHz Wifi BE RE - Chain B
Page 100
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Procedure Comments:
Measurements performed in accordance with FCC KDB 558074
Peak measurements performed with: RBW=1MHz, VBW=3MHz, peak detector, max hold, auto sweep time
Unless otherwise stated/noted, emission has duty cycle ≥ 98% and was measured using RBW=1MHz, VBW=10Hz, peak detector, linear
average mode, auto sweep time, max hold.
Mode
Data Rate
11b
11g
n20
n40
HT0
HT0
Duty Cycle Constant
(x)
DC?
0.99
0.99
0.99
0.97
Yes
Yes
Yes
Yes
T (ms)
Pwr Cor
Factor*
2.272
2.06
1.919
0.944
0.0
0.0
0.0
0.1
Lin Volt
Cor
Factor**
0.0
0.0
0.0
0.2
Min VBW
for FS (Hz)
440
485
521
1059
Measurement Specific Notes:
Note 3:
N t 6:
Note
R95717
Emission has duty cycle < 98%, but constant, average measurement performed: RBW=1MHz, VBW=10Hz, peak detector,
linear averaging, auto sweep, trace average 100 traces, measurement corrected by Linear Voltage correction factor
Plots of the average bandedge do not account for any duty cycle correction. Refer to the tabular results for final
measurements.
2.4GHz Wifi BE RE - Chain B
Page 101
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #1: Radiated Bandedge Measurements
Date of Test: 6/6/2014 0:00
Test Engineer: Joseph Cadigal
Test Location: FT Chamber#7
Channel:
Tx Chain:
Mode:
Data Rate:
Config. Used: 1
Config Change: none
EUT Voltage: 3.3 VDC
Target (dBm)
16.5
Power Settings
Measured (dBm)
16.6
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
172
2389.280
47.9
54.0
-6.1
172
2389.840
54.0
74.0
-20.0
PK
AVG
14
2389.360
44.9
54.0
-9.1
14
2371.160
53.3
74.0
-20.7
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain B
Software Setting
21.5
Height
meters
1.2
1.2
1.1
1.1
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 102
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
11
Mode:
Data Rate:
Target (dBm)
16.5
Power Settings
Measured (dBm)
16.6
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
172
2488.790
47.1
54.0
-6.9
172
2488.430
55.0
74.0
-19.0
PK
AVG
20
2488.790
43.2
54.0
-10.8
20
2496.990
52.8
74.0
-21.2
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain B
Software Setting
21.0
Height
meters
1.1
1.1
1.0
1.0
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 103
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #2: Radiated Bandedge Measurements
Date of Test: 6/9/2014 0:00
Test Engineer: John Caizzi
Test Location: Chamber 7
Channel:
Tx Chain:
Config. Used: 1
Config Change: none
EUT Voltage: 3.3 VDC
Mode:
Data Rate:
Target (dBm)
14.5
Power Settings
Measured (dBm)
14.6
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
166
2390.000
48.0
54.0
-6.0
166
2389.600
62.4
74.0
-11.6
PK
AVG
84
2390.000
44.8
54.0
-9.2
2389 760
57 7
74 0
-16
84
2389.760
57.7
74.0
16.33
PK
R95717
2.4GHz Wifi BE RE - Chain B
Software Setting
24.0
Height
meters
1.10
1.10
1.00
1 00
1.00
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 104
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
Mode:
Data Rate:
Target (dBm)
15.5
Power Settings
Measured (dBm)
15.7
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
193
2390.000
47.8
54.0
-6.2
193
2385.670
64.7
74.0
-9.3
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain B
Software Setting
25.0
Height
meters
1.00
1.00
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 105
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
10
Mode:
Data Rate:
Target (dBm)
15.5
Power Settings
Measured (dBm)
15.5
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
170
2483.530
46.2
54.0
-7.8
170
2484.950
61.6
74.0
-12.4
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain B
Software Setting
25.0
Height
meters
1.11
1.11
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 106
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
11
Mode:
Data Rate:
Target (dBm)
12.5
Power Settings
Measured (dBm)
12.4
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
164
2483.500
46.1
54.0
-7.9
164
2484.760
61.2
74.0
-12.8
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain B
Software Setting
21.5
Height
meters
1.10
1.10
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 107
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #3: Radiated Bandedge Measurements
Date of Test: 6/9/2014 0:00
Test Engineer: John Caizzi
Test Location: Chamber 7
Channel:
Tx Chain:
Config. Used: 1
Config Change: none
EUT Voltage: 3.3 VDC
Mode:
Data Rate:
n20
HT0
Target (dBm)
14.5
Power Settings
Measured (dBm)
14.8
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
162
2390.000
49.6
54.0
-4.4
162
2389.120
63.2
74.0
-10.8
PK
AVG
98
2390.000
48.6
54.0
-5.4
2388 320
63 4
74 0
-10
98
2388.320
63.4
74.0
10.66
PK
R95717
2.4GHz Wifi BE RE - Chain B
Software Setting
24.0
Height
meters
1.14
1.14
1.11
1 11
1.11
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 108
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
Mode:
Data Rate:
n20
HT0
Target (dBm)
15.5
Power Settings
Measured (dBm)
15.6
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
161
2390.000
47.6
54.0
-6.4
161
2389.760
62.0
74.0
-12.0
PK
AVG
98
2390.000
45.9
54.0
-8.1
98
2388.080
61.1
74.0
-12.9
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain B
Software Setting
25.0
Height
meters
1.11
1.11
1.09
1.09
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 109
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
10
Mode:
Data Rate:
n20
HT0
Target (dBm)
15.5
Power Settings
Measured (dBm)
15.7
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
167
2483.570
47.2
54.0
-6.8
167
2486.510
60.3
74.0
-13.7
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain B
Software Setting
25.5
Height
meters
1.10
1.10
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 110
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
11
Mode:
Data Rate:
n20
HT0
Target (dBm)
12.5
Power Settings
Measured (dBm)
12.8
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
162
2483.500
46.7
54.0
-7.3
162
2484.000
61.0
74.0
-13.0
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain B
Software Setting
22.0
Height
meters
1.10
1.10
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 111
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #4: Radiated Bandedge Measurements
Date of Test: 6/9/2014 0:00
Test Engineer: John Caizzi
Test Location: Chamber 7
Channel:
Tx Chain:
Config. Used: 1
Config Change: none
EUT Voltage: 3.3 VDC
Mode:
Data Rate:
n40
HT0
Target (dBm)
13.5
Power Settings
Measured (dBm)
13.5
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
98
2390.000
53.0
54.0
-1.0
98
2389.760
66.5
74.0
-7.5
PK
AVG
165
2390.000
52.6
54.0
-1.4
2388 400
65 0
74 0
-99.00
165
2388.400
65.0
74.0
PK
R95717
2.4GHz Wifi BE RE - Chain B
Software Setting
21.5
Height
meters
1.09
1.09
1.14
1 14
1.14
Comments
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
Page 112
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
Mode:
Data Rate:
n40
HT0
Target (dBm)
14.5
Power Settings
Measured (dBm)
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
166
2390.000
53.5
54.0
-0.5
166
2389.600
66.7
74.0
-7.3
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain B
Software Setting
22.5
Height
meters
1.13
1.13
Comments
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
Page 113
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Config. Used: 1
Config Change: none
EUT Voltage: 3.3 VDC
Date of Test: 6/9/2014 0:00
Test Engineer: Jack Liu
Test Location: Chamber 7
Channel:
Tx Chain:
Mode:
Data Rate:
n40
HT0
Target (dBm)
16.5
Power Settings
Measured (dBm)
15.2
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
171
2483.500
53.4
54.0
-0.6
171
2483.960
67.9
74.0
-6.1
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain B
Software Setting
25.0
Height
meters
1.1
1.1
Comments
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
Page 114
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Config. Used: 1
Config Change: none
EUT Voltage: 3.3 VDC
Date of Test: 6/9/2014 0:00
Test Engineer: John Caizzi
Test Location: Chamber 7
Channel:
Tx Chain:
Mode:
Data Rate:
n40
HT0
Target (dBm)
13.5
Power Settings
Measured (dBm)
13.7
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
170
2483.500
51.4
54.0
-2.6
170
2484.920
64.6
74.0
-9.4
PK
AVG
76
2483.530
48.0
54.0
-6.0
76
2484.290
60.8
74.0
-13.2
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain B
Software Setting
23.0
Height
meters
1.12
1.12
1.00
1.00
Comments
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
Page 115
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Date of Test: 6/9/2014 0:00
Test Engineer: Jack Liu
Test Location: Chamber 7
Channel:
Tx Chain:
Config. Used: 1
Config Change: none
EUT Voltage: 3.3 VDC
Mode:
Data Rate:
n40
HT0
Target (dBm)
12.5
Power Settings
Measured (dBm)
12.7
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
176
2483.500
51.8
54.0
-2.2
176
2484.720
65.3
74.0
-8.7
PK
AVG
74
2483.570
46.9
54.0
-7.1
74
2485.420
59.5
74.0
-14.5
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain B
Software Setting
22.0
Height
meters
1.1
1.1
1.8
1.8
Comments
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
Page 116
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
Mode:
Data Rate:
n40
HT0
Target (dBm)
11.5
Power Settings
Measured (dBm)
11.4
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
179
2483.500
49.8
54.0
-4.2
179
2484.130
61.7
74.0
-12.3
PK
AVG
62
2483.500
47.0
54.0
-7.0
62
2484.360
59.7
74.0
-14.3
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - Chain B
Software Setting
20.5
Height
meters
1.0
1.0
1.0
1.0
Comments
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz, Note 3
POS; RB 1 MHz; VB: 3 MHz
Page 117
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
RSS 210 and FCC 15.247 (DTS) Radiated Spurious Emissions
Test Specific Details
Objective:
The objective of this test session is to perform final qualification testing of the EUT with respect to the
specification listed above.
General Test Configuration
The EUT and all local support equipment were located on the turntable for radiated spurious emissions testing.
For radiated emissions testing the measurement antenna was located 3 meters from the EUT, unless otherwise noted.
Ambient Conditions:
Temperature:
Rel. Humidity:
R95717
24 °C
35 %
2.4GHz Wifi BE RE - MIMO
Page 118
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Summary of Results - Device Operating in the 2400-2483.5 MHz Band
Run #
R95717
Mode
n20
40
n40
Channel
12412MHz
22417MHz
32422MHz
92452MHz
10 2457MHz
11 2462MHz
32422MHz
42427MHz 72442MHz
82447MHz
92452MHz
Target
Power
12.0, 12.0
13.5, 13.5
17.5, 17.5
17.5, 17.5
13.5, 13.5
12.0, 12.0
9.5, 9.5
11.5, 11.5
11.5, 11.5
10.5, 10.5
9.5, 9.5
Power
Setting
16.0
21.5
17.0
22.5
23.0
28.0
21.5
27.0
16.0
21.5
16.5
21.0
14.0
19.5
15.5
21.0
99.55
20.0
15.0
21.0
13.5
19.5
Test Performed
Limit
Result / Margin
FCC Part 15.209 /
15.247( c)
50.7 dBµV/m @ 2389.9
MHz (-3.3 dB)
49.4 dBµV/m @ 2390.0
MHz (-4.6 dB)
52.8 dBµV/m @ 2389.7
MHz (-1.2 dB)
52.9 dBµV/m @ 2483.5
MHz (-1.1 dB)
49.2 dBµV/m @ 2483.6
MHz (-4.8 dB)
52.8 dBµV/m @ 2483.5
MHz (-1.2 dB)
47.4 dBµV/m @ 2389.9
MHz (-6.6 dB)
49.1 dBµV/m @ 2389.4
MHz (-4.9 dB)
52
52.22 dBµV/m @ 2483
2483.55
MHz (-1.8 dB)
52.9 dBµV/m @ 2483.5
MHz (-1.1 dB)
53.0 dBµV/m @ 2483.5
MHz (-1.0 dB)
Restricted Band Edge
(2390 MHz)
Restricted Band Edge
(2483.5 MHz)
Restricted Band Edge
(2390 MHz)
Restricted Band Edge
(2483.5 MHz)
2.4GHz Wifi BE RE - MIMO
Page 119
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Modifications Made During Testing
No modifications were made to the EUT during testing
Deviations From The Standard
No deviations were made from the requirements of the standard.
Sample Notes
MAC Address: 001500F15B5D DRTU Tool Version 1.7.3-935 Driver version 17.1.0.11
Antenna: Skycross WiMax/WLAN
Procedure Comments:
Measurements performed in accordance with FCC KDB 558074
Peak measurements performed with: RBW=1MHz, VBW=3MHz, peak detector, max hold, auto sweep time
Unless otherwise stated/noted, emission has duty cycle ≥ 98% and was measured using RBW=1MHz, VBW=10Hz, peak detector, linear
average mode, auto sweep time, max hold.
Mode
Data Rate
n20
n40
HT0
HT0
Dutyy Cycle
Constant
(x)
DC?
0.99
0.97
Yes
Yes
T (ms)
Pwr Cor
Factor*
1.919
0.944
0.0
0.1
Lin Volt
Cor
Factor**
0.0
0.2
Min VBW
for FS (Hz)
521
1059
Measurement Specific Notes:
Note 1:
Note 2:
R95717
Emission has duty cycle < 98%, but constant, average measurement performed: RBW=1MHz, VBW=10Hz, peak detector,
linear averaging, auto sweep, trace average 100 traces, measurement corrected by Linear Voltage correction factor
Plots of the average bandedge do not account for any duty cycle correction. Refer to the tabular results for final
measurements.
2.4GHz Wifi BE RE - MIMO
Page 120
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #1: Radiated Bandedge Measurements
Config. Used: 1
Config Change: none
EUT Voltage: 3.3 VDC
Date of Test: 6/10/2014 0:00
Test Engineer: John Caizzi
Test Location: Chamber 7
Channel:
Tx Chain:
Chain
Both
12.0
Mode:
Data Rate:
Target (dBm)
12.0
n20
HT0
Total
15.0
Power Settings
Measured (dBm)
12.0
12.2
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
71
2389.920
50.7
54.0
-3.3
71
2388.160
64.0
74.0
-10.0
PK
-8.1
2390.000
45.9
54.0
8.1
AVG
212
2384.150
59.2
74.0
-14.8
PK
212
R95717
2.4GHz Wifi BE RE - MIMO
Height
meters
1.27
1.27
2.41
2.41
Software Setting
Total
15.1
16.0, 21.5
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 121
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
Chain
Both
13.5
Mode:
Data Rate:
Target (dBm)
13.5
J94914
T95471
Christine Krebill
N/A
n20
HT0
Total
16.5
Power Settings
Measured (dBm)
13.5
13.6
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
69
2390.000
47.2
54.0
-6.8
69
2389.600
61.2
74.0
-12.8
PK
AVG
149
2390.000
49.4
54.0
-4.6
149
2389.440
62.9
74.0
-11.1
PK
Note 7
The setting .5 dB below target gave a result higher than .5 dB below limit.
R95717
2.4GHz Wifi BE RE - MIMO
Height
meters
1.27
1.27
1.26
1.26
Software Setting
Total
17.0, 22.5
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 122
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
Chain
Both
17.5
Mode:
Data Rate:
Target (dBm)
17.5
n20
HT0
Total
20.5
Power Settings
Measured (dBm)
17.3
17.5
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
216
2389.680
52.8
54.0
-1.2
216
2386.470
71.1
74.0
-2.9
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - MIMO
Height
meters
1.19
1.19
Software Setting
Total
23.0, 28.0
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 123
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
Chain
Both
17.5
Mode:
Data Rate:
Target (dBm)
17.5
n20
HT0
Total
20.5
Power Settings
Measured (dBm)
17.5
17.6
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
172
2483.530
52.9
54.0
-1.1
172
2484.000
69.3
74.0
-4.7
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - MIMO
Height
meters
1.15
1.15
Software Setting
Total
21.5, 27.0
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 124
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Tx Chain:
Chain
10
Both
13.5
Mode:
Data Rate:
Target (dBm)
13.5
n20
HT0
Total
16.5
Power Settings
Measured (dBm)
13.5
13.5
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
174
2483.600
49.2
54.0
-4.8
174
2484.290
63.5
74.0
-10.5
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - MIMO
Height
meters
1.17
1.17
Software Setting
Total
16.0, 21.5
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 125
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Date of Test: 6/10/2014 0:00
Test Engineer: Jack Liu
Test Location: Chamber 7
Channel:
Tx Chain:
Chain
11
Both
12.0
Mode:
Data Rate:
Target (dBm)
12.0
Config. Used: 1
Config Change: none
EUT Voltage: 3.3 VDC
n20
HT0
Total
15.0
Power Settings
Measured (dBm)
12.0
10.3
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
176
2483.530
52.8
54.0
-1.2
176
2483.630
68.1
74.0
-5.9
PK
AVG
20
2483.500
43.7
54.0
-10.3
20
2483.530
59.2
74.0
-14.8
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - MIMO
Height
meters
1.1
1.1
1.4
1.4
Software Setting
Total
14.2
16.5, 21
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 126
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #2: Radiated Bandedge Measurements
Config. Used: 1
Config Change: none
EUT Voltage: 3.3 VDC
Date of Test: 6/10/2014 0:00
Test Engineer: Joseph Cadigal
Test Location: FT Chamber#7
Channel:
Tx Chain:
Chain
Both
9.5
Mode:
Data Rate:
Target (dBm)
9.5
n40
HT0
Total
12.5
Power Settings
Measured (dBm)
9.7
9.6
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
221
2389.920
47.4
54.0
-6.6
221
2389.440
57.6
74.0
-16.4
PK
2390 000
45 0
54 0
-99.00
2390.000
45.0
54.0
AVG
195
2389.680
55.8
74.0
-18.2
PK
195
R95717
2.4GHz Wifi BE RE - MIMO
Height
meters
1.2
1.2
10
1.0
1.0
Software Setting
Total
12.7
14.0, 19.5
Comments
POS; RB 1 MHz; VB: 10 Hz, Note 1
POS; RB 1 MHz; VB: 3 MHz
Hz Note 1
POS; RB 1 MHz; VB: 10 Hz,
POS; RB 1 MHz; VB: 3 MHz
Page 127
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Mode:
Tx Chain:
Both
Data Rate:
Chain
11.5
Target (dBm)
11.5
n40
HT0
Total
14.5
Power Settings
Measured (dBm)
11.0
11.0
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
220
2389.360
49.1
54.0
-4.9
220
2383.750
59.8
74.0
-14.2
PK
AVG
248
2390.000
43.2
54.0
-11.0
248
2389.280
52.7
74.0
-21.3
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - MIMO
Height
meters
1.2
1.2
2.3
2.3
Software Setting
Total
14.0
15.5, 21
Comments
POS; RB 1 MHz; VB: 10 Hz, Note 1
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz, Note 1
POS; RB 1 MHz; VB: 3 MHz
Page 128
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Mode:
Tx Chain:
Both
Data Rate:
Chain
11.5
Target (dBm)
11.5
n40
HT0
Total
14.5
Power Settings
Measured (dBm)
9.5
11.0
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
172
2483.500
52.2
54.0
-1.8
172
2484.360
62.8
74.0
-14.2
PK
AVG
282
2483.530
43.8
54.0
-11.0
282
2483.700
58.3
74.0
-21.3
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - MIMO
Height
meters
1.2
1.2
1.1
1.1
Software Setting
Total
13.3
14.0, 20.0
Comments
POS; RB 1 MHz; VB: 10 Hz, Note 1
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz, Note 1
POS; RB 1 MHz; VB: 3 MHz
Page 129
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Mode:
Tx Chain: Both
Data Rate:
Chain
10.5
Target (dBm)
10.5
n40
HT0
Total
13.5
Power Settings
Measured (dBm)
10.8
10.8
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
172
2483.500
52.9
54.0
-1.1
172
2484.160
65.4
74.0
-14.2
PK
AVG
282
2483.630
46.4
54.0
-11.0
282
2484.560
59.1
74.0
-21.3
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - MIMO
Height
meters
1.7
1.7
1.0
1.0
Software Setting
Total
13.8
15.0, 21.0
Comments
POS; RB 1 MHz; VB: 10 Hz, Note 1
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz, Note 1
POS; RB 1 MHz; VB: 3 MHz
Page 130
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Channel:
Mode:
Tx Chain: Both
Data Rate:
Chain
9.5
Target (dBm)
9.5
n40
HT0
Total
12.5
Power Settings
Measured (dBm)
9.4
9.4
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
169
2483.500
53.0
54.0
-1.0
169
2484.890
64.8
74.0
-14.2
PK
AVG
282
2483.670
47.4
54.0
-11.0
282
2484.130
58.7
74.0
-21.3
PK
R95717
J94914
T95471
Christine Krebill
N/A
2.4GHz Wifi BE RE - MIMO
Height
meters
1.1
1.1
1.1
1.1
Software Setting
Total
12.4
13.5, 19.5
Comments
POS; RB 1 MHz; VB: 10 Hz, Note 1
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz, Note 1
POS; RB 1 MHz; VB: 3 MHz
Page 131
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
RSS 210 and FCC 15.247 (DTS) Radiated Spurious Emissions
Test Specific Details
Objective:
The objective of this test session is to perform final qualification testing of the EUT with respect to the
specification listed above.
General Test Configuration
The EUT and all local support equipment were located on the turntable for radiated spurious emissions testing.
For radiated emissions testing the measurement antenna was located 3 meters from the EUT, unless otherwise noted.
Ambient Conditions:
Temperature:
Rel. Humidity:
??? °C
??? %
Summary of Results - Device Operating in the 2400-2483.5 MHz Band
Run #
Mode
Channel
Target
Power
Power
Setting
Test Performed
116.5
15.5
2412MHz
b71
17.5
15.0
Chain A 2442MHz
11 16.5
14.0
Radiated Emissions,
2462MHz
1 - 25 GHz
116.5
21.5
2412MHz
b72
17.5
22.0
Chain B 2442MHz
11 16.5
21.0
2462MHz
Scans on center channel in all three OFDM modes to determine the worst case mode.
7g17.5
21.0
Chain A 2442MHz
g717.5
27.0
Radiated Emissions,
Chain
2442MHz
1 - 25 GHz
7n20 - Chain
17.5
23.0 / 29.0
A+B
2442MHz
6n40 - Chain
16.5
23.0 / 28.0
A+B
2437MHz
R95717
2.4GHz Wifi Spurious RE
Limit
Result / Margin
FCC Part 15.209 /
15.247( c)
49.3 dBµV/m @ 3000.2
MHz (-4.7 dB)
39.5 dBµV/m @ 4884.0
MHz (-14.5 dB)
46.7 dBµV/m @ 4924.0
MHz (-7.3 dB)
40.6 dBµV/m @ 4824.0
MHz (-13.4 dB)
39.9 dBµV/m @ 4884.0
MHz (-14.1 dB)
42.7 dBµV/m @ 4924.0
MHz (-11.3 dB)
FCC Part 15.209 /
15.247( c)
40.3 dBµV/m @ 1599.1
MHz (-13.7 dB)
39.4 dBµV/m @
11678.9 MHz (-14.6 dB)
33.4 dBµV/m @ 1598.8
MHz (-20.6 dB)
35.4 dBµV/m @ 1598.6
MHz (-18.6 dB)
Page 132
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Measurements on low and high channels in worst-case OFDM mode.
g114.5
24.0
Radiated Emissions,
Chain B 2412MHz
1 - 25 GHz
g11 0.0
8.0
Chain
2462MHz
1n20 - Chain
12 / 12
16 / 21
Radiated Emissions,
A+B
2412MHz
1 - 25 GHz
11 n20 - Chain
0.0
4 / 8.5
A+B
2462MHz
FCC Part 15.209 /
15.247( c)
FCC Part 15.209 /
15.247( c)
J94914
T95471
Christine Krebill
N/A
No radio realated
emissions
No radio realated
emissions
No radio realated
emissions
No radio realated
emissions
Modifications Made During Testing
No modifications were made to the EUT during testing
Deviations From The Standard
No deviations were made from the requirements of the standard.
Sample Notes
MAC Address: 001500F15B5D DRTU Tool Version 1.7.3-935 Driver version 17.1.0.11
Antenna:
Procedure Comments:
Measurements performed in accordance with FCC KDB 558074
Peak measurements performed with: RBW=1MHz, VBW=3MHz, peak detector, max hold, auto sweep time.
Unless otherwise stated/noted, emission has duty cycle ≥ 98% and was measured using RBW=1MHz, VBW=10Hz, peak detector, linear
average mode, auto sweep time, max hold.
2.4GHz band reject filter used
R95717
Mode
Data Rate
11b
11g
n20
n40
HT0
HT0
Duty Cycle Constant
(x)
DC?
0.99
0.99
0.99
0.97
Yes
Yes
Yes
Yes
T (ms)
Pwr Cor
Factor*
2.272
2.06
1.919
0.944
0.0
0.0
0.0
0.1
2.4GHz Wifi Spurious RE
Lin Volt
Cor
Factor**
0.0
0.0
0.0
0.2
Min VBW
for FS (Hz)
440
485
521
1059
Page 133
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Measurement Specific Notes:
Note 1:
Note 2:
Note 3:
Note 4
R95717
Emission in non-restricted band, but limit of 15.209 used.
Emission in non-restricted band, the limit was set 20dB below the level of the fundamental and measured in 100kHz.
Emission has duty cycle < 98%, but constant, average measurement performed: RBW=1MHz, VBW=10Hz, peak detector,
linear averaging, auto sweep, trace average 100 traces, measurement corrected by Linear Voltage correction factor
Signal does not change with channel, not radio related, measured in run 1a.
2.4GHz Wifi Spurious RE
Page 134
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #1: Radiated Spurious Emissions, 1,000 - 25000 MHz. Operating Mode: 802.11b
Date of Test: 6/11/2014, 6/12/2014
Test Engineer: John Caizzi / Deniz Demirci
Test Location: Chamber 7
Config. Used: 1
Config Change: none
EUT Voltage: 3.3 VDC
Run #1a: Low Channel
Channel:
Tx Chain:
Mode:
Data Rate:
Target (dBm)
16.5
Frequency
MHz
1499.200
1499.370
1599.000
1592.170
3000.220
6000.450
R95717
Level
dBV/m
44.9
52.5
40.1
56.5
49.3
45.8
Pol
v/h
15.209 / 15.247
Limit
Margin
54.0
-9.1
74.0
-21.5
54.0
-13.9
-17.5
74.0
17.5
54.0
-4.7
54.0
-8.2
Power Settings
Measured (dBm)
17.7
Detector
Pk/QP/Avg
AVG
PK
AVG
PK
PK
PK
Azimuth
degrees
210
210
286
286
10
12
2.4GHz Wifi Spurious RE
Software Setting
15.5
Height
meters
1.25
1.25
1.02
1.02
1.00
1.00
Comments
Note 1
Note 1
Page 135
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #1b: Center Channel
Channel:
Tx Chain:
Mode:
Data Rate:
Target (dBm)
17.5
Frequency
MHz
10620.000
1591.670
1491.670
3000.000
5991.670
4500.000
4883.990
4884.020
R95717
Level
dBV/m
48.4
48.3
47.9
45.3
43.7
38.3
39.5
45.2
Pol
v/h
15.209 / 15.247
Limit
Margin
54.0
-5.6
54.0
-5.7
54.0
-6.1
54.0
-8.7
54.0
-10.3
54.0
-15.7
54.0
-14.5
74.0
-28.8
Power Settings
Measured (dBm)
17.3
Detector
Pk/QP/Avg
Peak
Peak
Peak
Peak
Peak
Peak
AVG
PK
Azimuth
degrees
350
258
208
10
278
111
111
2.4GHz Wifi Spurious RE
Software Setting
15.0
Height
meters
2.5
1.0
1.5
1.0
1.0
1.0
1.02
1.02
Comments
Emission not seen when investigated
Note 4
Note 4
Note 1, note 4
Note 1, note 4
Note 1
Page 136
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Note:
R95717
J94914
T95471
Christine Krebill
N/A
Scans made between 18 - 25 GHz with the measurement antenna moved around the card and its antennas 20-50cm from
the device indicated there were no significant emissions in this frequency range
2.4GHz Wifi Spurious RE
Page 137
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #1c: High Channel
Channel:
Tx Chain:
11
Mode:
Data Rate:
Target (dBm)
16.5
Frequency
MHz
4924.010
4924.220
4924.020
4923.790
1591.670
1491.670
3000.000
5991.670
Note:
R95717
Level
dBV/m
46.7
56.4
45.9
56.5
48.4
47.8
47.2
42.0
Pol
v/h
15.209 / 15.247
Limit
Margin
54.0
-7.3
74.0
-17.6
54.0
-8.1
74.0
-17.5
54.0
-5.6
54.0
-6.2
54.0
-6.8
54.0
-12.0
Power Settings
Measured (dBm)
16.7
Detector
Pk/QP/Avg
AVG
PK
AVG
PK
Peak
Peak
Peak
Peak
Azimuth
degrees
163
163
140
140
272
220
12
12
Software Setting
14.0
Height
meters
1.0
1.0
1.0
1.0
1.0
1.5
1.0
1.0
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Note 4
Note 4
Note 1, note 4
Note 1, note 4
Scans made between 18 - 25 GHz with the measurement antenna moved around the card and its antennas 20-50cm
from the device indicated there were no significant emissions in this frequency range
2.4GHz Wifi Spurious RE
Page 138
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #2: Radiated Spurious Emissions, 1,000 - 25000 MHz. Operating Mode: 802.11b
Run #2a: Low Channel
Channel:
Tx Chain:
Mode:
Data Rate:
Target (dBm)
16.5
Frequency
MHz
1591.670
1491.670
3000.000
5991.670
4823.980
4823.830
R95717
Level
dBV/m
48.8
47.6
46.2
42.0
40.6
45.7
Pol
v/h
15.209 / 15.247
Limit
Margin
54.0
-5.2
54.0
-6.4
54.0
-7.8
54.0
-12.0
54.0
-13.4
74.0
-28.3
Power Settings
Measured (dBm)
17.4
Detector
Pk/QP/Avg
Peak
Peak
Peak
Peak
AVG
PK
Azimuth
degrees
280
228
12
254
223
223
2.4GHz Wifi Spurious RE
Software Setting
21.5
Height
meters
1.0
1.5
1.0
1.0
1.0
1.0
Comments
Note 4
Note 4
Note 1, note 4
Note 1, note 4
Page 139
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #2b: Center Channel
Channel:
Tx Chain:
Mode:
Data Rate:
Target (dBm)
17.5
Frequency
MHz
1600.000
1491.670
3000.000
4883.330
5991.670
4883.950
4884.160
Note:
R95717
Level
dBV/m
49.6
48.4
47.0
41.6
42.5
39.9
45.3
Pol
v/h
15.209 / 15.247
Limit
Margin
54.0
-4.4
54.0
-5.6
54.0
-7.0
54.0
-12.4
54.0
-11.5
54.0
-14.1
74.0
-28.7
Power Settings
Measured (dBm)
17.7
Detector
Pk/QP/Avg
Peak
Peak
Peak
Peak
Peak
AVG
PK
Azimuth
degrees
260
211
222
249
226
226
Software Setting
22.0
Height
meters
1.0
1.5
1.0
1.0
1.0
1.00
1.00
Comments
Note 4
Note 4
Note 1, note 4
Note 1, note 4
Scans made between 18 - 25 GHz with the measurement antenna moved around the card and its antennas 20-50cm
20 50cm from
the device indicated there were no significant emissions in this frequency range
2.4GHz Wifi Spurious RE
Page 140
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #2c: High Channel
Channel:
Tx Chain:
11
Mode:
Data Rate:
Target (dBm)
16.5
Frequency
MHz
4924.020
4916.970
4924.020
4926.790
4943.950
1491.670
3000.000
1591.670
1158 330
1158.330
6000.000
4941.670
Note:
R95717
Level
dBV/m
42.7
55.2
42.4
55.0
39.8
48.3
47.7
47.6
43 9
43.9
43.6
43.4
Pol
v/h
15.209 / 15.247
Limit
Margin
54.0
-11.3
74.0
-18.8
54.0
-11.6
74.0
-19.0
54.0
-14.2
54.0
-5.7
54.0
-6.3
54.0
-6.4
54 0
-10
54.0
10.11
54.0
-10.4
54.0
-10.6
Power Settings
Measured (dBm)
16.6
Detector
Pk/QP/Avg
AVG
PK
AVG
PK
AVG
Peak
Peak
Peak
Peak
Peak
Peak
Azimuth
degrees
307
307
191
191
159
217
257
215
12
194
Software Setting
21.0
Height
meters
1.0
1.0
1.3
1.3
1.14
1.5
1.0
1.0
10
1.0
1.0
1.0
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Note 4
Note 1, note 4
Note 4
Note 1, note 4
Scans made between 18 - 25 GHz with the measurement antenna moved around the card and its antennas 20-50cm from
the device indicated there were no significant emissions in this frequency range
2.4GHz Wifi Spurious RE
Page 141
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #3: Radiated Spurious Emissions, 1,000 - 25000 MHz. Operating Mode: OFDM
Date of Test: 6/11/2014 0:00
Config. Used: 1
Test Engineer: John Caizzi / Jack Liu
Config Change: none
Test Location: Chamber 7
EUT Voltage: 3.3 VDC
Run #3a: Center Channel
Channel:
Tx Chain:
Mode:
Data Rate:
Target (dBm)
17.5
Frequency
MHz
1591.670
1491.670
3000.000
6000.000
1599.140
1592.200
Note:
R95717
Level
dBV/m
50.8
47.4
46.5
42.1
40.3
57.1
Pol
v/h
15.209 / 15.247
Limit
Margin
54.0
-3.2
54.0
-6.6
54.0
-7.5
54.0
-11.9
54.0
-13.7
-16.9
74.0
16.9
Power Settings
Measured (dBm)
17.5
Detector
Pk/QP/Avg
Peak
Peak
Peak
Peak
AVG
PK
Azimuth
degrees
289
227
12
253
276
276
Software Setting
21.0
Height
meters
1.0
1.5
1.0
1.0
1.0
1.0
Comments
Note 4
Note 1, note 4
Note 1, note 4
Note 4
Note 4
Scans made between 18 - 25 GHz with the measurement antenna moved around the card and its antennas 20-50cm from
the device indicated there were no significant emissions in this frequency range
2.4GHz Wifi Spurious RE
Page 142
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Date of Test: 6/11/2014 0:00
Test Engineer: Jack Liu
Test Location: Chamber 7
J94914
T95471
Christine Krebill
N/A
Config. Used: 1
Config Change: none
EUT Voltage: 3.3 VDC
Run #3b: Center Channel
Channel:
Tx Chain:
Mode:
Data Rate:
Target (dBm)
17.5
Frequency
MHz
11678.900
11667.070
3000.120
1499.120
1497 850
1497.850
1598.950
1596.580
R95717
Level
dBV/m
39.4
50.8
50.1
43.9
51 7
51.7
34.0
54.6
Pol
v/h
15.209 / 15.247
Limit
Margin
54.0
-14.6
74.0
-23.2
54.0
-3.9
54.0
-10.1
74 0
-22
74.0
22.33
54.0
-20.0
74.0
-19.4
Power Settings
Measured (dBm)
17.3
Detector
Pk/QP/Avg
AVG
PK
PK
AVG
PK
AVG
PK
Azimuth
degrees
201
201
223
223
239
239
2.4GHz Wifi Spurious RE
Software Setting
27.0
Height
meters
1.0
1.0
1.0
1.3
13
1.3
1.0
1.0
Comments
Notes 1, 4
Note 4
Note 4
Note 4
Note 4
Page 143
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Note:
R95717
J94914
T95471
Christine Krebill
N/A
Scans made between 18 - 25 GHz with the measurement antenna moved around the card and its antennas 20-50cm from
the device indicated there were no significant emissions in this frequency range
2.4GHz Wifi Spurious RE
Page 144
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #3c: Center Channel
Channel:
Tx Chain:
Chain
Frequency
MHz
1598.750
1595.680
3000.210
1499.110
1497.740
Note:
R95717
Mode:
Data Rate:
A+B
17.5
Level
dBV/m
33.4
55.8
49.4
44.0
51.3
Target (dBm)
17.5
Pol
v/h
n20
HT0
Total
20.5
15.209 / 15.247
Limit
Margin
54.0
-20.6
74.0
-18.2
54.0
-4.6
54.0
-10.0
74.0
-22.7
Power Settings
Measured (dBm)
17.3
17.4
Detector
Pk/QP/Avg
AVG
PK
PK
AVG
PK
Azimuth
degrees
268
268
219
219
Height
meters
1.0
1.0
1.0
1.2
1.2
Software Setting
Total
20.4
23.0, 29.0
Comments
Note 4
Note 4
Notes 1, 4
Note 4
Note 4
Scans made between 18 - 25 GHz with the measurement antenna moved around the card and its antennas 20-50cm from
the device indicated there were no significant emissions in this frequency range
2.4GHz Wifi Spurious RE
Page 145
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #3d: Center Channel
Channel:
Tx Chain:
Chain
Frequency
MHz
1598.640
1593.840
3000.250
1498.970
1498.270
R95717
Mode:
Data Rate:
A+B
16.5
Level
dBV/m
35.4
55.9
48.8
43.5
52.2
Target (dBm)
16.5
Pol
v/h
n40
HT0
Total
19.5
15.209 / 15.247
Limit
Margin
54.0
-18.6
74.0
-18.1
54.0
-5.2
54.0
-10.5
74.0
-21.8
Power Settings
Measured (dBm)
16.7
16.7
Detector
Pk/QP/Avg
AVG
PK
PK
AVG
PK
Azimuth
degrees
275
275
219
219
2.4GHz Wifi Spurious RE
Height
meters
1.0
1.0
1.0
1.4
1.4
Software Setting
Total
19.7
23.0, 28.0
Comments
Note 4
Note 4
Notes 1, 4
Note 4
Note 4
Page 146
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Note:
R95717
J94914
T95471
Christine Krebill
N/A
Scans made between 18 - 25 GHz with the measurement antenna moved around the card and its antennas 20-50cm from
the device indicated there were no significant emissions in this frequency range
2.4GHz Wifi Spurious RE
Page 147
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #4: Radiated Spurious Emissions, 1,000 - 25000 MHz. Operating Mode: Worse case from Run #2
Date of Test: 6/12/2014
Config. Used: 1
Test Engineer: Deniz Demirci
Config Change: None
Test Location: FT Ch# 7
EUT Voltage: 3.3 VDC
Run #4a: Low Channel
Channel:
Mode:
Tx Chain:
Data Rate:
Target (dBm)
14.5
Frequency
MHz
3000.200
3000.210
4496.730
4498.280
1598.910
1592.490
1498.890
1499.460
R95717
Level
dBV/m
46.8
49.8
33.9
46.5
35.9
57.8
43.1
53.6
Pol
v/h
15.209 / 15.247
Limit
Margin
54.0
-7.2
74.0
-24.2
54.0
-20.1
74.0
-27.5
54.0
-18.1
-16.2
74.0
16.2
54.0
-10.9
74.0
-20.4
Power Settings
Measured (dBm)
14.6
Detector
Pk/QP/Avg
AVG
PK
AVG
PK
AVG
PK
AVG
PK
Azimuth
degrees
266
266
268
268
210
210
2.4GHz Wifi Spurious RE
Software Setting
24.0
Height
meters
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.2
Comments
Notes 1, 4
Notes 1, 4
Note 4
Note 4
Note 4
Note 4
Note 4
Note 4
Page 148
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #4b: High Channel
Channel:
11
Tx Chain:
Mode:
Data Rate:
Target (dBm)
0.0
Frequency
MHz
1499.020
1499.030
1598.870
1594.070
3000.210
3000.220
4496.880
4497.200
R95717
Level
dBV/m
44.1
53.7
34.4
53.3
47.2
50.4
33.9
46.5
Pol
v/h
J94914
T95471
Christine Krebill
N/A
15.209 / 15.247
Limit
Margin
54.0
-9.9
74.0
-20.3
54.0
-19.6
74.0
-20.7
54.0
-6.8
74.0
-23.6
54.0
-20.1
74.0
-27.5
Power Settings
Measured (dBm)
0.3
Detector
Pk/QP/Avg
AVG
PK
AVG
PK
AVG
PK
AVG
PK
Azimuth
degrees
211
211
220
220
279
279
2.4GHz Wifi Spurious RE
Software Setting
8.0
Height
meters
1.3
1.3
1.0
1.0
1.0
1.0
1.0
1.0
Comments
Note 4
Note 4
Note 4
Note 4
Notes 1, 4
Notes 1, 4
Note 4
Note 4
Page 149
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #4c: Low Channel
Channel:
A+B
Tx Chain:
Chain
Frequency
MHz
4496.870
4496.870
3000.200
3000.210
1499.010
1499.170
1598.650
1596.930
R95717
12.0
Level
dBV/m
33.5
46.1
47.2
50.2
44.6
53.0
35.9
57.6
Mode:
Data Rate:
Target (dBm)
12.0
Pol
v/h
J94914
T95471
Christine Krebill
N/A
n20
HT0
Total
15.0
15.209 / 15.247
Limit
Margin
54.0
-20.5
74.0
-27.9
54.0
-6.8
74.0
-23.8
54.0
-9.4
74.0
-21.0
54.0
-18.1
74.0
-16.4
Power Settings
Measured (dBm)
12.2
12.2
Detector
Pk/QP/Avg
AVG
PK
AVG
PK
AVG
PK
AVG
PK
Azimuth
degrees
274
274
10
10
212
212
269
269
2.4GHz Wifi Spurious RE
Height
meters
1.0
1.0
1.0
1.0
1.3
1.3
1.0
1.0
Software Setting
Total
15.2
16 / 21.5
Comments
Note 4
Note 4
Notes 1, 4
Notes 1, 4
Note 4
Note 4
Note 4
Note 4
Page 150
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #4d: High Channel
Channel:
11
A+B
Tx Chain:
Chain
Frequency
MHz
1598.480
1592.920
1499.180
1498.570
3000.240
3000.170
4496.970
4497.330
R95717
0.0
Level
dBV/m
35.3
55.6
43.5
52.5
46.9
49.9
33.6
46.6
Mode:
Data Rate:
Target (dBm)
0.0
Pol
v/h
J94914
T95471
Christine Krebill
N/A
n20
HT0
Total
3.0
15.209 / 15.247
Limit
Margin
54.0
-18.7
74.0
-18.4
54.0
-10.5
74.0
-21.5
54.0
-7.1
74.0
-24.1
54.0
-20.4
74.0
-27.4
Power Settings
Measured (dBm)
0.1
0.2
Detector
Pk/QP/Avg
AVG
PK
AVG
PK
AVG
PK
AVG
PK
Azimuth
degrees
258
258
215
215
10
10
277
277
2.4GHz Wifi Spurious RE
Height
meters
1.0
1.0
1.4
1.4
1.0
1.0
1.0
1.0
Software Setting
Total
3.2
4 / 8.5
Comments
Note 4
Note 4
Note 4
Note 4
Notes 1, 4
Notes 1, 4
Note 4
Note 4
Page 151
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
RSS 210 and FCC 15.247 (DTS) Antenna Port Measurements
Power, PSD, Bandwidth and Spurious Emissions
Test Specific Details
Objective:
The objective of this test session is to perform final qualification testing of the EUT with respect to the
specification listed above.
Date of Test: 6/19/2014
John Caizzi
Test Engineer:
Joseph Cadigal
Test Location: Lab 4A
Config. Used: 1
Config Change: none
Host Unit Voltage
General Test Configuration
When measuring the conducted emissions from the EUT's antenna port, the antenna port of the EUT was connected to the spectrum
analyzer or power meter via a suitable attenuator to prevent overloading the measurement system. All measurements are corrected to
allow for the external attenuators used.
Ambient Conditions:
Temperature:
Rel. Humidity:
23 °C
35 %
Summary of Results
MAC Address: 001500F15B5D DRTU Tool Version 1.7.3-935 Driver version 17.1.0.11
Test Performed
Limit
Run # Pwr setting Avg Pwr
15.247(b)
Output Power
15.247(d)
Power spectral Density (PSD)
Default
Minimum 6dB Bandwidth
15.247(a)
99% Bandwidth
RSS GEN
Spurious emissions
15.247(b)
Result / Margin
Pass / Fail
Pass
3.5 dBm
Pass
-6.5 dBm/3kHz
655 kHz
Pass
1.042 MHz
Pass
All spurious < -20 dBc
Modifications Made During Testing
No modifications were made to the EUT during testing
Deviations From The Standard
No deviations were made from the requirements of the standard.
R95717
DTS Bluetooth Antenna
Page 152
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #1: Output Power
Power
Setting2
Frequency (MHz)
Default
2402
2440
2480
Note 1:
Note 2:
Note 3:
Output Power
mW
(dBm) 1
3.5
2.2
3.3
2.1
3.1
2.0
Antenna
Gain (dBi)
3.2
3.2
3.2
Result
Pass
Pass
Pass
EIRP Note 2
dBm
0.005
6.7
0.004
6.5
0.004
6.3
J94914
T95471
Christine Krebill
N/A
Output Power
mW
(dBm) 3
Output power measured using a peak power meter, spurious limit is -20dBc.
Power setting - the software power setting used during testing, included for reference only.
Power measured using average power meter and is included for reference only.
Run #2: Power spectral Density
Power
Setting
Frequency (MHz)
Default
2402
2440
2480
Note 1:
R95717
PSD
(dBm/10kHz) Note 1
-6.5
-6.6
-6.5
Limit
dBm/3kHz
8.0
8.0
8.0
Result
Pass
Pass
Pass
T t performed
d per method
th d PKSPD
i KDB 558074.
558074 Power
t l density
d it measuredd using:
3kH ≤ RBW ≤ 100kHz,
100kH
Test
PKSPD, in
spectral
3kHz
VBW=3*RBW, peak detector, span = 1.5*DTS BW, auto sweep time, max hold.
DTS Bluetooth Antenna
Page 153
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #3: Signal Bandwidth
Note 1:
Note 2:
R95717
Power
Setting
Frequency (MHz)
Resolution
Bandwidth
Default
2402
2440
2480
Notes 1& 2
J94914
T95471
Christine Krebill
N/A
Bandwidth (MHz)
6dB
99%
0.664
1.042
0.655
1.040
0.667
1.037
6dB bandwidth measured using RB = 100 kHz, VB = 300 kHz.
99% bandwidth measured using RB = 20 kHz, VB = 62 kHz (VB >=3RB)
DTS Bluetooth Antenna
Page 154
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
R95717
DTS Bluetooth Antenna
J94914
T95471
Christine Krebill
N/A
Page 155
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Run #4: Out of Band Spurious Emissions
Frequency (MHz)
Limit
Result
2402
2440
2480
-20dBc
-20dBc
-20dBc
pass
pass
pass
Plots for low channel, power setting = default
R95717
DTS Bluetooth Antenna
Page 156
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Additional plot showing compliance with -20dBc limit from 2390 MHz to 2400 MHz. Radiated measurements used to show compliance
with the limits in the restricted band below 2390 MHz.
Plots for center channel, power setting = defualt
R95717
DTS Bluetooth Antenna
Page 157
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Plots for high channel, power setting = default
Radiated measurements used to show compliance with the limits in the restricted band above 2483.5 MHz.
R95717
DTS Bluetooth Antenna
Page 158
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
RSS 210 and FCC 15.247 (DTS) Radiated Spurious Emissions
Test Specific Details
Objective:
The objective of this test session is to perform final qualification testing of the EUT with respect to the
specification listed above.
General Test Configuration
The EUT and all local support equipment were located on the turntable for radiated spurious emissions testing.
For radiated emissions testing the measurement antenna was located 3 meters from the EUT.
Ambient Conditions:
Temperature:
Rel. Humidity:
24 °C
38 %
Summary of Results - Device Operating in the 2400-2483.5 MHz Band
MAC Address: 001500F15B5D DRTU Tool Version 1.7.3-935 Driver version 17.1.0.11
Power
Measured
Test Performed
Run #
Mode
Channel
Settingg
Power
Restricted Band Edge
(2390 MHz)
Default
3.02
1a
low
Radiated Emissions,
1 - 26 GHz
Bluetooth
Radiated Emissions,
1b
center
Default
3.20
LE
1 - 26 GHz
Restricted Band Edge
(2483.5 MHz)
Default
1c
high
3.40
Radiated Emissions,
1 - 26 GHz
Limit
Result / Margin
FCC Part 15.209 /
15.247( c)
FCC Part 15.209 /
15.247( c)
FCC Part 15.209 /
15.247( c)
FCC Part 15.209 /
15.247( c)
FCC Part 15.209 /
15.247( c)
36.3 dBµV/m @ 2342.1
MHz (-17.7 dB)
No radio realated
emissions
No radio realated
emissions
38.2 dBµV/m @ 2485.0
MHz (-15.8 dB)
No radio realated
emissions
Modifications Made During Testing
No modifications were made to the EUT during testing.
Deviations From The Standard
No deviations were made from the requirements of the standard.
R95717
DTS Bluetooth RE
Page 159
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95471
Christine Krebill
N/A
Sample Notes
BT Address: 001500F15B61 DRTU Tool Version 1.7.3-935 Driver version 17.1.0.11
Antenna: antenna connected.
Duty Cycle: 0.63
Correction Factor (dB) 4.0
R95717
DTS Bluetooth RE
Page 160
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #1: Radiated Spurious Emissions, 1000-26000 MHz. Operating Mode: Low Energy
Date of Test: 6/16/2014 & 6/17/14
Test Engineer: Jack Liu
Test Location: FT Chamber7
J94914
T95471
Christine Krebill
N/A
Run #1a: Low Channel @ 2402 MHz
Power Settings
Target (dBm)
Measured (dBm)
Software Setting
3.02
Default
Chain B
Fundamental Signal Field Strength: Peak and average values measured in 1 MHz, and peak value measured in 100kHz
15.209 / 15.247
Azimuth
Height Comments
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
meters
MHz
dBV/m
Pk
192
1.0
POS; RB 100 kHz; VB: 100 kHz
2401.990
100.5
Pk
78
1.0
POS; RB 100 kHz; VB: 100 kHz
2401.910
95.4
Fundamental emission level @ 3m in 100kHz RBW:
Limit for emissions outside of restricted bands:
Limit for emissions outside of restricted bands:
100.5 dBV/m
80.5 dBV/m
70.5 dBV/m
Band Edge Signal Field Strength - Direct measurement of field strength
15 209 / 15.247
15 247
15.209
Frequency
Level
Pol
Detector
Azimuth
MHz
v/h
Limit
Margin Pk/QP/Avg degrees
dBV/m
AVG
60
2342.060
36.3
54.0
-17.7
60
2342.870
43.4
74.0
-30.6
PK
AVG
71
2341.900
35.1
54.0
-18.9
71
2376.050
42.8
74.0
-31.2
PK
R95717
DTS Bluetooth RE
Limit is -20dBc (Peak power measurement)
Limit is -30dBc (UNII power measurement)
Height
meters
1.0
1.0
1.1
1.1
Comments
Correction Factor (3.96dB) added
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 161
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Other Spurious Emissions
Frequency
Level
MHz
dBV/m
1499.000
43.5
1496.470
51.1
1598.470
39.0
1600.070
60.2
4496.930
39.4
4497.130
51.5
3000.070
46.5
2999.940
50.4
Note 1:
Note 2:
Note 3:
Note 4
R95717
Pol
v/h
15.209 / 15.247
Limit
Margin
54.0
-10.5
74.0
-22.9
54.0
-15.0
74.0
-13.8
54.0
-14.6
74.0
-22.5
54.0
-7.5
74.0
-23.6
Detector
Pk/QP/Avg
AVG
PK
AVG
PK
AVG
PK
AVG
PK
Azimuth
degrees
209
209
267
267
272
272
268
268
Height
meters
1.3
1.3
1.0
1.0
1.0
1.0
1.0
1.0
J94914
T95471
Christine Krebill
N/A
Comments
Note 3
Note 3
Note 3
Note 3
Note 2, 3
Note 2, 3
Note 2, 3
Note 2, 3
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 20dB below the
level of the fundamental and measured in 100kHz.
Signal is not in a restricted band but the more stringent restricted band limit was used.
Not radio related. See notes for 2.4GHz Wifi Spurious RE.
Scans made between 18 - 26GHz with the measurement antenna moved around the card and its antennas 20-50cm from the
device indicated there were no signifcant emissions in this frequency range
DTS Bluetooth RE
Page 162
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #1b: Center Channel @ 2440 MHz
Power Settings
Target (dBm)
Measured (dBm)
3.20
Chain B
Note - measured power in table above is average power, for reference only.
Fundamental Signal Field Strength: Peak value measured in 100kHz
15.209 / 15.247
Frequency
Level
Pol
Detector
v/h
Limit
Margin
Pk/QP/Avg
MHz
dBV/m
Pk
2439.930
100.6
Pk
2439.970
94.0
Fundamental emission level @ 3m in 100kHz RBW:
Limit for emissions outside of restricted bands:
Limit for emissions outside of restricted bands:
Other Spurious Emissions
Frequency
Level
MHz
dBV/m
1498.940
44.0
1497 140
52 5
1497.140
52.5
1593.860
40.6
1597.330
59.4
3000.140
45.9
3000.140
50.5
4496.960
39.8
4496.230
50.6
Note 1:
Note 2:
Note 3:
Note 4
R95717
Pol
v/h
15.209 / 15.247
Limit
Margin
54.0
-10.0
74 0
-21
74.0
21.55
54.0
-13.4
74.0
-14.6
54.0
-8.1
74.0
-23.5
54.0
-14.2
74.0
-23.4
Azimuth
degrees
191
88
100.6 dBV/m
80.6 dBV/m
70.6 dBV/m
Detector
Pk/QP/Avg
AVG
PK
AVG
PK
AVG
PK
AVG
PK
Azimuth
degrees
208
208
274
274
264
264
268
268
J94914
T95471
Christine Krebill
N/A
Software Setting
Default
Height
meters
1.0
1.0
Comments
POS; RB 100 kHz; VB: 100 kHz
POS; RB 100 kHz; VB: 100 kHz
Limit is -20dBc (Peak power measurement)
Limit is -30dBc (UNII power measurement)
Height
meters
1.3
13
1.3
1.0
1.0
1.0
1.0
1.0
1.0
Comments
Note 3
Note 3
Note 3
Note 3
Note 2, 3
Note 2, 3
Note 2, 3
Note 2, 3
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 20dB below the
level of the fundamental and measured in 100kHz.
Signal is not in a restricted band but the more stringent restricted band limit was used.
Not radio related. See notes for 2.4GHz Wifi Spurious RE.
Scans made between 18 - 26GHz with the measurement antenna moved around the card and its antennas 20-50cm from the
device indicated there were no signifcant emissions in this frequency range
DTS Bluetooth RE
Page 163
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
R95717
DTS Bluetooth RE
J94914
T95471
Christine Krebill
N/A
Page 164
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #1c: High Channel @ 2480 MHz
Power Settings
Measured (dBm)
Target (dBm)
3.40
Chain B
Note - measured power in table above is average power, for reference only.
Fundamental Signal Field Strength: Peak value measured in 100kHz
15.209 / 15.247
Frequency
Level
Pol
Detector
v/h
Limit
Margin
Pk/QP/Avg
MHz
dBV/m
Pk
2480.010
98.6
Pk
2479.950
94.4
Fundamental emission level @ 3m in 100kHz RBW:
Limit for emissions outside of restricted bands:
Limit for emissions outside of restricted bands:
Azimuth
degrees
192
92
98.6
dBV/m
78.6 dBV/m
68.6 dBV/m
Band Edge Signal Field Strength - Direct measurement of field strength
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
189
2484.990
38.2
54.0
-15.8
2484 530
56 1
74 0
-17
2484.530
56.1
74.0
17.99
PK
189
2485.020
36.5
54.0
-17.5
AVG
90
90
2484.660
52.4
74.0
-21.6
PK
R95717
DTS Bluetooth RE
J94914
T95471
Christine Krebill
N/A
Software Setting
Default
Height
meters
1.0
1.0
Comments
POS; RB 100 kHz; VB: 100 kHz
POS; RB 100 kHz; VB: 100 kHz
Limit is -20dBc (Peak power measurement)
Limit is -30dBc (UNII power measurement)
Height
meters
1.0
10
1.0
1.0
1.0
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
Page 165
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Other Spurious Emissions
15.209 / 15.247
Frequency
Level
Pol
v/h
Limit
Margin
MHz
dBV/m
1499.140
44.0
54.0
-10.0
1499.240
52.9
74.0
-21.1
1598.760
40.9
54.0
-13.1
1592.460
60.2
74.0
-13.8
3000.150
46.3
54.0
-7.7
3000.190
50.7
74.0
-23.3
4497.060
40.2
54.0
-13.8
4496.200
51.7
74.0
-22.3
Note 1:
Note 2:
Note 3:
Note 4
R95717
Detector
Pk/QP/Avg
AVG
PK
AVG
PK
AVG
PK
AVG
PK
Azimuth
degrees
206
206
263
263
326
326
272
272
Height
meters
1.3
1.3
1.0
1.0
1.0
1.0
1.0
1.0
J94914
T95471
Christine Krebill
N/A
Comments
Note 3
Note 3
Note 3
Note 3
Note 2, 3
Note 2, 3
Note 2, 3
Note 2, 3
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 20dB below the
level of the fundamental and measured in 100kHz.
Signal is not in a restricted band but the more stringent restricted band limit was used.
Not radio related. See notes for 2.4GHz Wifi Spurious RE.
Scans made between 18 - 26GHz with the measurement antenna moved around the card and its antennas 20-50cm from the
device indicated there were no signifcant emissions in this frequency range
DTS Bluetooth RE
Page 166
EMC Test Data
Client: Intel Corporation
Product 7265D2W
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Environment:
Contact: Steve Hackett
Emissions Standard(s): FCC Part 15.247, 15.407, RSS-210
Immunity Standard(s): -
J94914
T95472
Christine Krebill
Radio
EMC Test Data
For The
Intel Corporation
Product
7265D2W
Date of Last Test: 7/8/2014
R95717
Cover
Page 167
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95472
Christine Krebill
N/A
RSS 210 and FCC 15.247 (DTS) Radiated Spurious Emissions
Test Specific Details
Objective:
The objective of this test session is to perform final qualification testing of the EUT with respect to the
specification listed above.
General Test Configuration
The EUT and all local support equipment were located on the turntable for radiated spurious emissions testing.
For radiated emissions testing the measurement antenna was located 3 meters from the EUT.
For Bluetooth: Tx is chain B, Rx is chain B. For WiFi, only Chain A is used for transmit in the 2.4GHz band when Bluetooth is active,
both chains can be used in 5GHz bands.
Ambient Conditions:
Temperature:
Rel. Humidity:
24 °C
39 %
Summary of Results
C Address: 001500F15B3A DRTU Tool Version 1.7.3-935 Driver version 17.1.0.11
MAC
Power
Measured
Test Performed
Run #
Mode
Channel
Setting
Power
BT 1Mb/s
802.11b
2402MHz
2412MHz
10
14.5
4.8
17.6
BT 1Mb/s
802.11b
2480MHz
2462MHz
10
14.0
5.0
17.7
BT 1Mb/s
802.11g
2402MHz
2412MHz
10
20.5
4.8
17.7
BT 1Mb/s
802.11g
2480MHz
2462MHz
10
19.5
5.0
17.5
R95717
Radiated
Emissions
1- 10 GHz
Simultaneous Tx RE
Limit
Result / Margin
FCC 15.247
56.8 dBµ V/m @ 1199.1
MHz (-17.2 dB)
FCC 15.247
43.5 dBµ V/m @ 4924.0
MHz (-10.5 dB)
FCC 15.247
56.3 dBµ V/m @ 1196.0
MHz (-17.7 dB)
FCC 15.247
53.3 dBµ V/m @ 1198.7
MHz (-20.7 dB)
Page 168
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Power
Measured
Test Performed
Setting
Power
WiFi mode for the following runs based on worst case mode from runs 1 through 4
BT 1Mb/s 2402MHz
10
4.8
Radiated
802.11b 2437MHz
14
17.7
Emissions
BT 1Mb/s 2440MHz
10
5.1
1- 10 GHz
802.11b 2412MHz
14.5
17.6
Run #
Mode
Channel
BT 1Mb/s
802.11b
2440MHz
2462MHz
10
14
5.1
17.7
BT 1Mb/s
802.11b
2480MHz
2437MHz
10
14
5.0
17.7
Radiated
Emissions
1- 10 GHz
J94914
T95472
Christine Krebill
N/A
Limit
Result / Margin
FCC 15.247
46.1 dBµ V/m @ 2366.1
MHz (-7.9 dB)
FCC 15.247
41.9 dBµ V/m @ 2356.8
MHz (-12.1 dB)
FCC 15.247
41.3 dBµ V/m @ 4924.0
MHz (-12.7 dB)
FCC 15.247
41.1 dBµ V/m @ 4874.0
MHz (-12.9 dB)
WiFi mode and channel and Bluetooth channel based on the worst case mode from runs 1 through 8
BT 3Mb/s 2440 MHz
1.2
FCC 15.247
Radiated
802.11b 2462 MHz
14
17.7
Emissions
BTLE
2440 MHz Default
3.2
1- 10 GHz
FCC 15.247
10
802.11b 2462 MHz
14
17.7
41.4 dBµ V/m @ 4924.0
MHz (-12.6 dB)
43.5 dBµ V/m @ 4924.0
MHz (-10.5 dB)
11n 20MHz with both chains active at 16.5
16 5 dBm per chain,
chain center channel in each 5GHz band.
band Bluetooth on center
WiFi mode - 802
802.11n
channel, 1Mb/s mode
No intermodulation
BT 1Mb/s 2440MHz
10
5.1
founded
FCC 15.247
11
802.11n20 5200MHz 31.0 / 32.0 16.6 / 16.5
Other Emissions refer to
the spurious RE results
No intermodulation
BT 1Mb/s 2440MHz
10
5.1
founded
FCC 15.247
12
802.11n20 5300MHz 32.0 / 33.0 16.6 / 16.5
Other
Emissions
refer to
Radiated
the
spurious
RE
results
Emissions
No intermodulation
1- 15 GHz
BT 1Mb/s 2440MHz
10
5.1
founded
FCC 15.247
13
802.11n20 5580MHz 28.5 / 29.5 16.5 / 16.6
Other Emissions refer to
the spurious RE results
No intermodulation
BT 1Mb/s 2440MHz
10
5.1
founded
FCC 15.247
14
802.11n20 5785MHz 34.5 / 35.5 16.7 / 16.5
Other Emissions refer to
the spurious RE results
R95717
Simultaneous Tx RE
Page 169
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95472
Christine Krebill
N/A
Modifications Made During Testing
No modifications were made to the EUT during testing
Deviations From The Standard
No deviations were made from the requirements of the standard.
Notes:
Bluetooth uses a frequency hopping algorithm that means that the device, during normal operation, is only on a specific channel for a
short period of time. The average correction factor is calculated as follows:
A maximum length packet has a duration of 5 time slots.
The hopping rate is 1600 hops/second so the maximum dwell time is 5/1600 seconds, or 3.125ms.
With a minimum of 20 hopping channels a channel will not be used more than 4 times in any 100ms period.
The maximum dwell time in a 100ms period is 4 x 3.125ms = 12.5ms.
The average correction factor is, therefore, 20log(12.5/100) =-18dB
As this is a hopping radio this correction factor can be applied to the average value of the signal provided the average value was
measured with the device continuously transmitting. DA 00-0705 permits the use of the average correction on the measured average
value for frequency hopping radios.
All measurements in this data sheet do not include the average correction factor.
Antenna: Skycross WiMax/WLAN
R95717
Simultaneous Tx RE
Page 170
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95472
Christine Krebill
N/A
Run #1: 1-10GHz, 802.11b @ 2412 MHz Chain A, BT Basic Rate @ 2402 MHz Chain B
Date of Test: 6/18/2014
Test Location: FT Chamber #4
Config Change: None
Test Engineer: Jack Liu
Power Settings
Target (dBm)
Measured (dBm)
16.5
17.6
Chain A
4.8
Chain B
Note - measured power in table above is average power, for reference only.
Software Setting
14.5
10.0
Perform normal 1-10 GHz scan with filter for fundamental and then 2-3 GHz scan 20-30 cm from the product wihtout filter.
Preliminary Measurements (Peak versus average limit)
15.209/15.247
Azimuth
Height Comments
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
meters
MHz
dBV/m
1200.000
46.6
54.0
-7.4
Peak
220
1.0
1825.000
52.6
70.0
-17.4
Peak
60
2.2
1591.670
42.4
54.0
-11.6
Peak
260
1.6
R95717
Simultaneous Tx RE
Page 171
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Spurious Emissions excluding allocated band (final measurements at 3m)
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
237
1196.800
31.4
54.0
-22.6
237
1199.130
56.8
74.0
-17.2
PK
AVG
195
1819.800
27.3
54.0
-26.7
195
1819.600
39.2
74.0
-34.8
PK
AVG
61
1594.340
31.2
54.0
-22.8
61
1594.940
47.0
74.0
-27.0
PK
Height
meters
1.0
1.0
1.9
1.9
1.6
1.6
Preliminary Measurements (Peak versus average limit) at 20-30cm from EUT
15.209/15.247
Frequency
Level
Pol
Detector
Azimuth
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
Peak
180
2460.920
55.9
2573.150
43.6
54.0
-10.4
Peak
180
Height
meters
1.0
1.0
Spurious Emissions near allocated band (final measurments at 3m)
15.209 / 15.247
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg
MHz
dBV/m
2573.150
43.6
54.0
-10.4
Peak
No intermodulation founded
Note 1:
Note 2:
Note 3:
R95717
Azimuth
degrees
180
Height
meters
1.0
J94914
T95472
Christine Krebill
N/A
Comments
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
Note 2
Note 2
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
Comments
In band intermittent signal
Note 2
Comments
Note 2
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 20dB below the
level of the fundamental and measured in 100kHz.
Signal is not in a restricted band but the more stringent restricted band limit was used.
Signal is only present when Bluetooth is enabled, average correction for hopping occupancy could be applied
Simultaneous Tx RE
Page 172
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95472
Christine Krebill
N/A
Run #2: 1-10GHz, 802.11b @ 2462 MHz Chain A, BT Basic Rate @ 2480 MHz Chain B
Date of Test: 6/18/2014
Test Location: FT Chamber #4
Test Engineer: Jack Liu / R. Varelas
Config Change: None
Power Settings
Target (dBm)
Measured (dBm)
16.5
17.7
Chain A
5.0
Chain B
Note - measured power in table above is average power, for reference only.
Software Setting
14.0
10.0
Perform normal 1-10 GHz scan with filter for fundamental and then 2-3 GHz scan 20-30 cm from the product wihtout filter.
Preliminary Measurements (Peak versus average limit)
15.209/15.247
Azimuth
Height Comments
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
meters
MHz
dBV/m
1191.670
43.8
54.0
-10.2
Peak
113
1.5
1591.670
38.7
54.0
-15.3
Peak
126
2.0
4925.000
46.2
54.0
-7.8
Peak
143
1.5
R95717
Simultaneous Tx RE
Page 173
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Spurious Emissions excluding allocated band (final measurements at 3m)
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
207
4923.980
43.5
54.0
-10.5
207
4924.070
49.0
74.0
-25.0
PK
AVG
252
1174.670
30.3
54.0
-23.7
252
1195.670
48.7
74.0
-25.3
PK
AVG
284
1597.800
30.3
54.0
-23.7
284
1597.470
48.6
74.0
-25.4
PK
Height
meters
1.0
1.0
1.7
1.7
1.8
1.8
Preliminary Measurements (Peak versus average limit) at 20-30cm from EUT
15.209/15.247
Frequency
Level
Pol
Detector
Azimuth
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
Peak
180
2488.980
53.1
2623.250
41.0
54.0
-13.0
Peak
180
Height
meters
1.0
1.0
Spurious Emissions near allocated band (final measurments at 3m)
15.209 / 15.247
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg
MHz
dBV/m
2623.250
41.0
54.0
-13.0
Peak
No intermodulation founded
Note 1:
Note 2:
Note 3:
R95717
Azimuth
degrees
180
Height
meters
1.0
J94914
T95472
Christine Krebill
N/A
Comments
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
Comments
Refer to Band Edge test result
Note 2
Comments
Note 2
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 20dB below the
level of the fundamental and measured in 100kHz.
Signal is not in a restricted band but the more stringent restricted band limit was used.
Signal is only present when Bluetooth is enabled, average correction for hopping occupancy could be applied.
Simultaneous Tx RE
Page 174
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95472
Christine Krebill
N/A
Run #3: 1-10GHz, 802.11g @ 2412 MHz Chain A, BT Basic Rate @ 2402 MHz Chain B
Date of Test: 6/18/2014
Test Location: FT Chamber #4
Test Engineer: Jack Liu / R. Varelas
Config Change: None
Chain A
Chain B
Target (dBm)
14.0
Power Settings
Measured (dBm)
17.7
5.0
Software Setting
20.5
10.0
Note - measured power in table above is average power, for reference only.
Perform normal 1-10 GHz scan with filter for fundamental and then 2-3 GHz scan 20-30 cm from the product wihtout filter.
Preliminary Measurements (Peak versus average limit)
15.209/15.247
Azimuth
Height Comments
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
meters
MHz
dBV/m
1191.670
46.3
54.0
-7.7
Peak
232
1.0
1241.670
40.0
70.0
-30.0
Peak
216
1.0
1591.670
40.4
54.0
-13.6
Peak
108
2.0
R95717
Simultaneous Tx RE
Page 175
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Spurious Emissions excluding allocated band (final measurements at 3m)
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
227
1197.000
31.8
54.0
-22.2
227
1196.000
56.3
74.0
-17.7
PK
AVG
129
1260.940
29.1
54.0
-24.9
129
1241.070
42.8
74.0
-31.2
PK
AVG
80
1594.540
30.9
54.0
-23.1
80
1594.070
46.2
74.0
-27.8
PK
Height
meters
1.0
1.0
1.4
1.4
1.5
1.5
Preliminary Measurements (Peak versus average limit) at 20-30cm from EUT
15.209/15.247
Frequency
Level
Pol
Detector
Azimuth
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
Peak
180
2462.930
55.3
Peak
180
2384.770
54.8
Height
meters
1.0
1.0
Spurious Emissions near allocated band (final measurments at 3m)
15.209 / 15.247
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg
MHz
dBV/m
No intermodulation founded
Note 1:
Note 2:
Note 3:
R95717
Azimuth
degrees
Height
meters
J94914
T95472
Christine Krebill
N/A
Comments
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
Note 2
Note 2
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
Comments
In band intermittent signal
Refer to Band Edge test result
Comments
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 20dB below the
level of the fundamental and measured in 100kHz.
Signal is not in a restricted band but the more stringent restricted band limit was used.
Signal is only present when Bluetooth is enabled, average correction for hopping occupancy could be applied
Simultaneous Tx RE
Page 176
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95472
Christine Krebill
N/A
Run #4: 1-10GHz, 802.11g @ 2462 MHz Chain A, BT Basic Rate @ 2480 MHz Chain B
Date of Test: 6/18/2014
Test Location: FT Chamber #4
Test Engineer: Jack Liu / R. Varelas
Config Change: None
Chain A
Chain B
Target (dBm)
12.5
Power Settings
Measured (dBm)
17.5
5.0
Software Setting
19.5
10.0
Note - measured power in table above is average power, for reference only.
Perform normal 1-10 GHz scan with filter for fundamental and then 2-3 GHz scan 20-30 cm from the product wihtout filter.
Preliminary Measurements (Peak versus average limit)
15.209/15.247
Azimuth
Height Comments
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
meters
MHz
dBV/m
1600.000
40.2
54.0
-13.8
Peak
221
1.5
1200.000
43.9
54.0
-10.1
Peak
259
1.0
Spurious Emissions excluding allocated band (final measurements at 3m)
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
62
1598.670
31.1
54.0
-22.9
62
1593.930
47.7
74.0
-26.3
PK
AVG
268
1202.800
32.9
54.0
-21.1
268
1198.730
53.3
74.0
-20.7
PK
R95717
Simultaneous Tx RE
Height
meters
1.5
1.5
1.2
1.2
Comments
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
Page 177
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Preliminary Measurements (Peak versus average limit) at 20-30cm from EUT
15.209/15.247
Frequency
Level
Pol
Detector
Azimuth
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
Peak
180
2490.980
55.6
Spurious Emissions near allocated band (final measurments at 3m)
15.209 / 15.247
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg
MHz
dBV/m
No intermodulation founded
Note 1:
Note 2:
Note 3:
R95717
Azimuth
degrees
Height
meters
1.0
Height
meters
J94914
T95472
Christine Krebill
N/A
Comments
Refer to Band Edge test result
Comments
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 20dB below the
level of the fundamental and measured in 100kHz.
Signal is not in a restricted band but the more stringent restricted band limit was used.
Signal is only present when Bluetooth is enabled, average correction for hopping occupancy could be applied
Simultaneous Tx RE
Page 178
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #5: 1-10GHz, 802.11b @ 2437 MHz Chain A, BT Basic Rate @ 2402 MHz Chain B
Date of Test: 6/19/2014
Test Location: FT Chamber 4
Test Engineer: Jack Liu / R. Varelas
Config Change: None
Power Settings
Target (dBm)
Measured (dBm)
17.5
17.7
Chain A
4.8
Chain B
Note - measured power in table above is average power, for reference only.
J94914
T95472
Christine Krebill
N/A
Software Setting
14.0
10.0
Perform normal 1-10 GHz scan with filter for fundamental and then 2-3 GHz scan 20-30 cm from the product wihtout filter.
Preliminary Measurements (Peak versus average limit)
15.209/15.247
Azimuth
Height Comments
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
meters
MHz
dBV/m
1195.120
44.6
54.0
-9.4
Peak
114
1.3
1594.440
41.2
54.0
-12.8
Peak
227
1.6
4874.170
42.4
54.0
-11.6
Peak
141
1.3
Spurious Emissions excluding allocated band (final measurements at 3m)
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
154
4873.970
40.2
54.0
-13.8
154
4873.870
46.9
74.0
-27.1
PK
AVG
223
1594.510
30.4
54.0
-23.6
223
1596.370
46.1
74.0
-27.9
PK
AVG
116
1196.570
30.7
54.0
-23.3
116
1194.630
53.7
74.0
-20.3
PK
R95717
Simultaneous Tx RE
Height
meters
1.9
1.9
1.3
1.3
1.6
1.6
Comments
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
Page 179
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Preliminary Measurements (Peak versus average limit) at 100cm from EUT
15.209/15.247
Frequency
Level
Pol
Detector
Azimuth
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
2368.740
49.2
54.0
-4.8
Peak
210
Height
meters
1.5
Comments
Spurious Emissions near allocated band (final measurments at 3m)
15.209 / 15.247
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg
MHz
dBV/m
AVG
2366.050
46.1
54.0
-7.9
2366.300
54.2
74.0
-19.8
PK
Height
meters
1.4
1.4
Comments
Note 1:
Note 1:
Note 2:
Note 3:
R95717
Azimuth
degrees
155
155
J94914
T95472
Christine Krebill
N/A
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 20dB below the
level of the fundamental and measured in 100kHz.
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 30dB below the
level of the fundamental and measured in 100kHz.
Signal is not in a restricted band but the more stringent restricted band limit was used.
Signal is only present when Bluetooth is enabled, average correction for hopping occupancy could be applied
Simultaneous Tx RE
Page 180
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #6: 1-10GHz, 802.11b @ 2412 MHz Chain A, BT Basic Rate @ 2440 MHz Chain B
Date of Test: 6/19/2014
Test Location: FT Chamber 4
Test Engineer: Jack Liu
Config Change: None
Power Settings
Target (dBm)
Measured (dBm)
16.5
17.6
Chain A
5.1
Chain B
Note - measured power in table above is average power, for reference only.
J94914
T95472
Christine Krebill
N/A
Software Setting
14.5
10.0
Perform normal 1-10 GHz scan with filter for fundamental and then 2-3 GHz scan 20-30 cm from the product wihtout filter.
Preliminary Measurements (Peak versus average limit)
15.209/15.247
Azimuth
Height Comments
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
meters
MHz
dBV/m
1198.140
44.7
54.0
-9.3
Peak
275
1.3
1590.120
40.7
54.0
-13.3
Peak
87
1.9
Spurious Emissions excluding allocated band (final measurements at 3m)
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
277
1198.160
31.0
54.0
-23.0
277
1199.340
50.0
74.0
-24.0
PK
AVG
93
1591.090
28.8
54.0
-25.2
93
1590.570
41.2
74.0
-32.8
PK
R95717
Simultaneous Tx RE
Height
meters
1.0
1.0
1.0
1.0
Comments
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
Page 181
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Preliminary Measurements (Peak versus average limit) at 100cm from EUT
15.209/15.247
Frequency
Level
Pol
Detector
Azimuth
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
Peak
203
2386.770
52.5
2352.710
44.9
54.0
-9.1
Peak
204
Height
meters
1.0
1.5
Spurious Emissions near allocated band (final measurments at 3m)
15.209 / 15.247
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg
MHz
dBV/m
AVG
2356.760
41.9
54.0
-12.1
2356.600
51.1
74.0
-22.9
PK
Height
meters
1.6
1.6
Note 1:
Note 1:
Note 2:
Note 3:
R95717
Azimuth
degrees
204
204
J94914
T95472
Christine Krebill
N/A
Comments
Refer to Band Edge test result
Comments
POS; RB 1 MHz; VB: 10 Hz
POS; RB 1 MHz; VB: 3 MHz
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 20dB below the
level of the fundamental and measured in 100kHz.
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 30dB below the
level of the fundamental and measured in 100kHz.
Signal is not in a restricted band but the more stringent restricted band limit was used.
Signal is only present when Bluetooth is enabled, average correction for hopping occupancy could be applied
Simultaneous Tx RE
Page 182
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #7: 1-10GHz, 802.11b @ 2462 MHz Chain A, BT Basic Rate @ 2440 MHz Chain B
Date of Test: 6/19/2014
Test Location: FT Chamber 4
Test Engineer: Jack Liu
Config Change: None
Power Settings
Target (dBm)
Measured (dBm)
16.5
17.6
Chain A
5.1
Chain B
Note - measured power in table above is average power, for reference only.
J94914
T95472
Christine Krebill
N/A
Software Setting
14.5
10.0
Perform normal 1-10 GHz scan with filter for fundamental and then 2-3 GHz scan 20-30 cm from the product wihtout filter.
Preliminary Measurements (Peak versus average limit)
15.209/15.247
Azimuth
Height Comments
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
meters
MHz
dBV/m
1195.250
45.3
54.0
-8.7
Peak
111
1.3
1590.780
39.5
54.0
-14.5
Peak
103
1.0
4924.000
43.7
54.0
-10.3
Peak
189
1.6
Spurious Emissions excluding allocated band (final measurements at 3m)
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
147
4923.960
41.3
54.0
-12.7
147
4924.020
46.9
74.0
-27.1
PK
AVG
116
1196.560
29.9
54.0
-24.1
116
1196.320
53.6
74.0
-20.4
PK
AVG
101
1592.010
29.2
54.0
-24.8
101
1592.100
40.7
74.0
-33.3
PK
R95717
Simultaneous Tx RE
Height
meters
1.0
1.0
1.6
1.6
1.0
1.0
Comments
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
Page 183
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Preliminary Measurements (Peak versus average limit) at 20-30cm from EUT
15.209/15.247
Frequency
Level
Pol
Detector
Azimuth
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
Peak
182
2488.980
54.7
Spurious Emissions near allocated band (final measurments at 3m)
15.209 / 15.247
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg
MHz
dBV/m
No intermodulation founded
Note 1:
Note 1:
Note 2:
Note 3:
R95717
Azimuth
degrees
Height
meters
1.0
Height
meters
J94914
T95472
Christine Krebill
N/A
Comments
Refer to Band Edge test result
Comments
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 20dB below the
level of the fundamental and measured in 100kHz.
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 30dB below the
level of the fundamental and measured in 100kHz.
Signal is not in a restricted band but the more stringent restricted band limit was used.
Signal is only present when Bluetooth is enabled, average correction for hopping occupancy could be applied
Simultaneous Tx RE
Page 184
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #8: 1-10GHz, 802.11b @ 2437 MHz Chain A, BT Basic Rate @ 2480 MHz Chain B
Date of Test: 6/19/2014
Test Location: FT Chamber 4
Test Engineer: Jack Liu
Config Change: None
Power Settings
Target (dBm)
Measured (dBm)
16.5
17.7
Chain A
5.0
Chain B
Note - measured power in table above is average power, for reference only.
J94914
T95472
Christine Krebill
N/A
Software Setting
14.0
10.0
Perform normal 1-10 GHz scan with filter for fundamental and then 2-3 GHz scan 20-30 cm from the product wihtout filter.
Preliminary Measurements (Peak versus average limit)
15.209/15.247
Azimuth
Height Comments
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
meters
MHz
dBV/m
1192.970
44.7
54.0
-9.3
Peak
224
1.0
1594.110
41.0
54.0
-13.0
Peak
120
1.0
4874.080
42.6
54.0
-11.4
Peak
154
1.9
Spurious Emissions excluding allocated band (final measurements at 3m)
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
154
4874.020
41.1
54.0
-12.9
154
4874.190
47.0
74.0
-27.0
PK
AVG
121
1595.050
31.7
54.0
-22.3
121
1593.860
49.9
74.0
-24.1
PK
AVG
225
1194.440
32.5
54.0
-21.5
225
1194.200
54.0
74.0
-20.0
PK
R95717
Simultaneous Tx RE
Height
meters
1.9
1.9
1.0
1.0
1.0
1.0
Comments
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
Page 185
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Preliminary Measurements (Peak versus average limit) at 20-30cm from EUT
15.209/15.247
Frequency
Level
Pol
Detector
Azimuth
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
No emission founded
Height
meters
Comments
Spurious Emissions near allocated band (final measurments at 3m)
15.209 / 15.247
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg
MHz
dBV/m
No intermodulation founded
Height
meters
Comments
Note 1:
Note 1:
Note 2:
Note 3:
R95717
Azimuth
degrees
J94914
T95472
Christine Krebill
N/A
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 20dB below the
level of the fundamental and measured in 100kHz.
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 30dB below the
level of the fundamental and measured in 100kHz.
Signal is not in a restricted band but the more stringent restricted band limit was used.
Signal is only present when Bluetooth is enabled, average correction for hopping occupancy could be applied
Simultaneous Tx RE
Page 186
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #9: 1-10GHz, 802.11b @ 2412 MHz Chain A, BT EDR Rate @ 2440 MHz Chain B
Date of Test: 6/19/2014
Test Location: FT Chamber 4
Test Engineer: Jack Liu
Config Change: None
Power Settings
Target (dBm)
Measured (dBm)
16.5
17.7
Chain A
1.2
Chain B
Note - measured power in table above is average power, for reference only.
J94914
T95472
Christine Krebill
N/A
Software Setting
14.0
6.0
Perform normal 1-10 GHz scan with filter for fundamental and then 2-3 GHz scan 100 cm from the product wihtout filter.
Preliminary Measurements (Peak versus average limit)
15.209/15.247
Azimuth
Height Comments
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
meters
MHz
dBV/m
1245.000
46.2
70.0
-23.8
Peak
119
1.3
1593.170
38.0
54.0
-16.0
Peak
124
1.0
4924.030
45.2
54.0
-8.8
Peak
115
1.3
Spurious Emissions excluding allocated band (final measurements at 3m)
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
146
4923.970
41.4
54.0
-12.6
146
4923.840
47.1
74.0
-26.9
PK
AVG
122
1593.770
32.0
54.0
-22.0
122
1592.460
47.7
74.0
-26.3
PK
117
1244.940
52.4
68.3
-15.9
PK
R95717
Simultaneous Tx RE
Height
meters
1.9
1.9
1.0
1.0
0.9
Comments
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
RB 1 MHz;VB 3 MHz;Peak
Page 187
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Preliminary Measurements (Peak versus average limit) at 20-30cm from EUT
15.209/15.247
Frequency
Level
Pol
Detector
Azimuth
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
No intermodulation founded
Height
meters
Comments
Spurious Emissions near allocated band (final measurments at 3m)
15.209 / 15.247
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg
MHz
dBV/m
No intermodulation founded
Height
meters
Comments
Note 1:
Note 1:
Note 2:
Note 3:
R95717
Azimuth
degrees
J94914
T95472
Christine Krebill
N/A
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 20dB below the
level of the fundamental and measured in 100kHz.
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 30dB below the
level of the fundamental and measured in 100kHz.
Signal is not in a restricted band but the more stringent restricted band limit was used.
Signal is only present when Bluetooth is enabled, average correction for hopping occupancy could be applied
Simultaneous Tx RE
Page 188
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #10: 1-10GHz, 802.11b @ 2412 MHz Chain A, BTLE @ 2440 MHz Chain B
Date of Test: 6/19/2014
Test Location: FT Chamber 4
Test Engineer: Jack Liu
Config Change: None
Power Settings
Target (dBm)
Measured (dBm)
16.5
17.7
Chain A
3.2
Chain B
Note - measured power in table above is average power, for reference only.
J94914
T95472
Christine Krebill
N/A
Software Setting
14.0
Default
Perform normal 1-10 GHz scan with filter for fundamental and then 2-3 GHz scan 100 cm from the product wihtout filter.
Preliminary Measurements (Peak versus average limit)
15.209/15.247
Azimuth
Height Comments
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
meters
MHz
dBV/m
1242.560
45.5
70.0
-24.5
Peak
308
1.6
1598.530
38.2
54.0
-15.8
Peak
60
1.6
4924.030
46.4
54.0
-7.6
Peak
125
2.2
Spurious Emissions excluding allocated band (final measurements at 3m)
15.209 / 15.247
Azimuth
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
AVG
157
4923.990
43.5
54.0
-10.5
157
4923.950
48.4
74.0
-25.6
PK
306
1243.960
48.4
68.3
-19.9
PK
AVG
58
1598.280
31.6
54.0
-22.4
58
1598.740
44.6
74.0
-29.4
PK
R95717
Simultaneous Tx RE
Height
meters
1.9
1.9
1.6
1.5
1.5
Comments
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
RB 1 MHz;VB 3 MHz;Peak
RB 1 MHz;VB 10 Hz;Peak
RB 1 MHz;VB 3 MHz;Peak
Page 189
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Preliminary Measurements (Peak versus average limit) at 20-30cm from EUT
15.209/15.247
Frequency
Level
Pol
Detector
Azimuth
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
No intermodulation founded
Height
meters
Comments
Spurious Emissions near allocated band (final measurments at 3m)
15.209 / 15.247
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg
MHz
dBV/m
No intermodulation founded
Height
meters
Comments
Note 1:
Note 1:
Note 2:
Note 3:
R95717
Azimuth
degrees
J94914
T95472
Christine Krebill
N/A
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 20dB below the
level of the fundamental and measured in 100kHz.
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 30dB below the
level of the fundamental and measured in 100kHz.
Signal is not in a restricted band but the more stringent restricted band limit was used.
Signal is only present when Bluetooth is enabled, average correction for hopping occupancy could be applied
Simultaneous Tx RE
Page 190
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Run #11: 1-15GHz, 802.11n20 @ 5200 MHz Chain A+B, BT Basic Rate @ 2440 MHz Chain B
Date of Test: 6/18/2014
Test Location: FT Chamber #4
Test Engineer: Jack Liu / R. Varelas
Config Change: None
Power Settings
Target (dBm)
Measured (dBm)
16.0
16.6
WiFi A
16.0
16.5
WiFi B
5.1
Bluetooth
Note - measured power in table above is average power, for reference only.
J94914
T95472
Christine Krebill
N/A
Software Setting
31.0
32.0
10.0
Perform normal 7-15 GHz scan with filter for fundamental and then 1-4 and 4-7 GHz scans 20-30 cm from the product wihtout filter.
Preliminary Measurements (Peak versus average limit)
15.209/15.247
Azimuth
Height Comments
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
meters
MHz
dBV/m
10401.330
39.0
68.3
-29.3
Peak
126
1.0
Harmonic of the EUT
Spurious Emissions (final measurements at 3m)
15.209 / 15.247
Frequency
Level
Pol
v/h
Limit
Margin
MHz
dBV/m
refer to the spurious RE results
R95717
Detector
Pk/QP/Avg
Azimuth
degrees
Simultaneous Tx RE
Height
meters
Comments
Page 191
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Preliminary Measurements (Peak versus average limit) at 20-30cm from EUT
15.209/15.247
Frequency
Level
Pol
Detector
Azimuth
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
5370.000
45.6
54.0
-8.4
Peak
180
4980.000
40.9
54.0
-13.1
Peak
180
2460.000
59.6
120.0
-60.4
Peak
180
Spurious Emissions (final measurments at 3m)
15.209 / 15.247
Frequency
Level
Pol
v/h
Limit
Margin
MHz
dBV/m
no emisisons found above the noise floor
Note 1:
Note 2:
Note 3:
R95717
Detector
Pk/QP/Avg
Azimuth
degrees
Height
meters
1.0
1.0
1.0
Height
meters
J94914
T95472
Christine Krebill
N/A
Comments
emission is in band
Comments
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 20dB below the
level of the fundamental and measured in 100kHz.
Signal is not in a restricted band but the more stringent restricted band limit was used.
Signal is only present when Bluetooth is enabled, average correction for hopping occupancy could be applied
Simultaneous Tx RE
Page 192
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95472
Christine Krebill
N/A
802 11n20 @ 5300 MHz Chain A+B
Run #12: 11-15GHz
15GHz, 802.11n20
A+B, BT Basic Rate @ 2440 MHz Chain B
Date of Test: 6/18/2014
Test Location: FT Chamber #4
Test Engineer: R. Varelas
Config Change: None
Power Settings
Target (dBm)
Measured (dBm)
16.0
16.6
WiFi A
16.0
16.5
WiFi B
5.1
Bluetooth
Note - measured power in table above is average power, for reference only.
Software Setting
32.0
33.0
10.0
Perform normal 7-15 GHz scan with filter for fundamental and then 1-4 and 4-7 GHz scans 20-30 cm from the product wihtout filter.
Preliminary Measurements (Peak versus average limit)
15.209/15.247
Azimuth
Height Comments
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
meters
MHz
dBV/m
10599.970
42.3
68.3
-26.0
Peak
212
1.0
Harmonic of the EUT
Spurious Emissions (final measurements at 3m)
15.209 / 15.247
Frequency
Level
Pol
v/h
Limit
Margin
MHz
dBV/m
refer to the spurious RE results
R95717
Detector
Pk/QP/Avg
Azimuth
degrees
Simultaneous Tx RE
Height
meters
Comments
Page 193
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Preliminary Measurements (Peak versus average limit) at 20-30cm
20 30cm from EUT
15.209/15.247
Frequency
Level
Pol
Detector
Azimuth
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
2460.000
63.3
120.0
-56.7
Peak
180
5140.000
45.8
54.0
-8.2
Peak
180
4880.000
42.0
54.0
-12.0
Peak
180
Spurious Emissions (final measurments at 3m)
15.209 / 15.247
Frequency
Level
Pol
v/h
Limit
Margin
MHz
dBV/m
no emissions found above the noise floor
Note 1:
Note 2:
Note 3:
R95717
Detector
Pk/QP/Avg
Azimuth
degrees
Height
meters
1.0
1.0
1.0
Height
meters
J94914
T95472
Christine Krebill
N/A
Comments
In band intermittent signal
Comments
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 20dB below the
level of the fundamental and measured in 100kHz.
Signal is not in a restricted band but the more stringent restricted band limit was used.
Signal is only present when Bluetooth is enabled, average correction for hopping occupancy could be applied
Simultaneous Tx RE
Page 194
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
R95717
Simultaneous Tx RE
J94914
T95472
Christine Krebill
N/A
Page 195
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95472
Christine Krebill
N/A
Run #13: 1-15GHz, 802.11n20 @ 5580 MHz Chain A+B, BT Basic Rate @ 2440 MHz Chain B
Date of Test: 6/18/2014
Test Location: FT Chamber #4
Test Engineer: R. Varelas
Config Change: None
Power Settings
Target (dBm)
Measured (dBm)
16.0
16.6
WiFi A
16.0
16.5
WiFi B
5.1
Bluetooth
Note - measured power in table above is average power, for reference only.
Software Setting
28.5
29.5
10.0
Perform normal 7-15 GHz scan with filter for fundamental and then 1-4 and 4-7 GHz scans 20-30 cm from the product wihtout filter.
Preliminary Measurements (Peak versus average limit)
15.209/15.247
Azimuth
Height Comments
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
meters
MHz
dBV/m
11167.600
40.4
54.0
-13.6
Peak
165
1.0
Harmonic of the EUT
Spurious Emissions (final measurements at 3m)
15 209 / 15
247
15.209
15.247
Frequency
Level
Pol
MHz
v/h
Limit
Margin
dBV/m
refer to the spurious RE results
R95717
Detector
Pk/QP/Avg
Azimuth
degrees
Simultaneous Tx RE
Height
meters
Comments
Page 196
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Preliminary Measurements (Peak versus average limit) at 20-30cm from EUT
15.209/15.247
Frequency
Level
Pol
Detector
Azimuth
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
4880.000
43.5
54.0
-10.5
Peak
180
5425.000
46.2
54.0
-7.8
Peak
180
2460.000
59.8
120.0
-60.2
Peak
180
Spurious Emissions (final measurments at 3m)
15.209 / 15.247
Frequency
Level
Pol
v/h
Limit
Margin
MHz
dBV/m
no emisisons found above the noise floor
Note 1:
Note 2:
Note 3:
R95717
Detector
Pk/QP/Avg
Azimuth
degrees
Height
meters
1.0
1.0
1.0
Height
meters
J94914
T95472
Christine Krebill
N/A
Comments
In band intermittent signal
Comments
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 20dB below the
level of the fundamental and measured in 100kHz.
Signal is not in a restricted band but the more stringent restricted band limit was used.
Signal is only present when Bluetooth is enabled, average correction for hopping occupancy could be applied
Simultaneous Tx RE
Page 197
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95472
Christine Krebill
N/A
802 11n20 @ 5785 MHz Chain A+B
Run #14: 11-15GHz
15GHz, 802.11n20
A+B, BT Basic Rate @ 2440 MHz Chain B
Date of Test: 6/18/2014
Test Location: FT Chamber #4
Test Engineer: R. Varelas
Config Change: None
Power Settings
Target (dBm)
Measured (dBm)
16.0
16.7
WiFi A
16.0
16.5
WiFi B
5.1
Bluetooth
Note - measured power in table above is average power, for reference only.
Software Setting
34.5
35.5
10.0
Perform normal 7-15 GHz scan with filter for fundamental and then 1-4 and 4-7 GHz scans 20-30 cm from the product wihtout filter.
Preliminary Measurements (Peak versus average limit)
15.209/15.247
Azimuth
Height Comments
Frequency
Level
Pol
Detector
v/h
Limit
Margin Pk/QP/Avg degrees
meters
MHz
dBV/m
11570.260
46.3
54.0
-7.7
Peak
101
1.0
Harmonic of the EUT
Spurious Emissions (final measurements at 3m)
15.209 / 15.247
Frequency
Level
Pol
v/h
Limit
Margin
MHz
dBV/m
refer to the spurious RE results
R95717
Detector
Pk/QP/Avg
Azimuth
degrees
Simultaneous Tx RE
Height
meters
Comments
Page 198
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Preliminary Measurements (Peak versus average limit) at 20-30cm from EUT
15 209/15 247
15.209/15.247
Frequency
Level
Pol
Detector
Azimuth
MHz
v/h
Limit
Margin Pk/QP/Avg degrees
dBV/m
2460.000
52.8
120.0
-67.2
Peak
180
Spurious Emissions (final measurments at 3m)
15.209 / 15.247
Frequency
Level
Pol
v/h
Limit
Margin
MHz
dBV/m
Emissions is in band
Note 1:
Note 2:
Note 3:
R95717
Detector
Pk/QP/Avg
Azimuth
degrees
Height
meters
1.0
Height
meters
J94914
T95472
Christine Krebill
N/A
Comments
In band intermittent signal
Comments
For emissions in restricted bands, the limit of 15.209 was used. For all other emissions, the limit was set 20dB below the
level of the fundamental and measured in 100kHz.
Signal is not in a restricted band but the more stringent restricted band limit was used.
Signal is only present when Bluetooth is enabled, average correction for hopping occupancy could be applied
Simultaneous Tx RE
Page 199
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
R95717
Simultaneous Tx RE
J94914
T95472
Christine Krebill
N/A
Page 200
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95472
Christine Krebill
N/A
Radiated Emissions
(Elliott Laboratories Fremont Facility, Semi-Anechoic Chamber)
Test Specific Details
Objective: The objective of this test session is to perform final qualification testing of the EUT with respect to the
specification listed above.
Date of Test: 6/17/2014
Test Engineer: John Caizzi
Test Location: Chamber 4
Config. Used: 1
Config Change: none
Host Unit Voltage 120V/60Hz
General Test Configuration
The EUT and any local support equipment were located on the turntable for radiated emissions testing.
The test distance and extrapolation factor (if applicable) are detailed under each run description.
Note, preliminary testing indicates that the emissions were maximized by orientation of the EUT and elevation of the measurement
antenna. Maximized testing indicated that the emissions were maximized by orientation of the EUT, elevation of the measuremen
Ambient Conditions:
Temperature:
Rel. Humidity:
23 °C
31 %
Summary of Results
MAC Address: 001500F15B3A, DRTU Tool Version 1.7.3-935, Driver version 17.1.0.11
Limit
Result
Run #
Test Performed
Radiated Emissions
FCC 15.209 / RSS 210
Pass
30 - 1000 MHz, Maximized
Radiated Emissions
FCC 15.209 / RSS 210
Pass
30 - 1000 MHz, Maximized
Margin
30.9 dBµ V/m @ 112.94 MHz
(-12.6 dB)
See above
Note - measurements with the WiFi and BT transmitters both operating indicate that the radiated emissions from the combination of test
fixture and EUT are not affected by the module's operating frequency or mode. Additional channels and modes were therefore not
necessary to show compliance with the limits.
Modifications Made During Testing
No modifications were made to the EUT during testing
Deviations From The Standard
No deviations were made from the requirements of the standard.
R95717
RE 30-1000 MHz (Module)
Page 201
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95472
Christine Krebill
N/A
Run #1: Preliminary Radiated Emissions, 30 - 1000 MHz
Configured to Tx , 802.11b, 16.5 dBm on chain A (setting = 13.5) on channel 6, Bluetooth 5.1 dBm, 1Mb/s (setting 10 dBm) on
channel 0
Frequency Range
30 - 1000 MHz
Test Parameters for Preliminary Scan(s)
Prescan Distance
Limit Distance
Preliminary peak readings captured during pre-scan
Level
Pol
Frequency
FCC 15.209 / RSS 210 Detector
v/h
Limit
Margin Pk/QP/Avg
MHz
dBV/m
112.935
32.7
43.5
-10.8
Peak
399.925
38.9
46.0
-7.1
Peak
497.952
33.8
46.0
-12.2
Peak
799.457
33.2
46.0
-12.8
Peak
933.500
34.6
46.0
-11.4
Peak
999.347
34.5
54.0
-19.5
Peak
R95717
Azimuth
degrees
330
178
193
236
247
176
RE 30-1000 MHz (Module)
Height
meters
1.0
1.0
1.0
1.0
1.0
1.0
Extrapolation Factor
0.0
Comments
Note 1
Note 1
Note 1
Page 202
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Preliminary quasi-peak readings (no manipulation of EUT interface cables)
FCC 15.209 / RSS 210 Detector
Frequency
Level
Pol
Azimuth
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
112.935
30.9
43.5
-12.6
QP
45
933.500
32.4
46.0
-13.6
QP
245
799.457
30.6
46.0
-15.4
QP
151
497.952
32.2
46.0
-13.8
QP
198
399.925
33.3
46.0
-12.7
QP
182
999.347
32.4
54.0
-21.6
QP
179
Note 1:
Height
meters
1.00
1.58
1.04
1.00
1.00
1.00
J94914
T95472
Christine Krebill
N/A
Comments
Note 1
Note 1
Note 1
Emission in non-restricted band, but limit of 15.209 used.
Run #2: Maximized Readings From Run #1
Frequency Range
30 - 1000 MHz
Test Parameters for Maximized Reading(s)
Test Distance
Limit Distance
quasi-peak
Maximized quasi
peak readings (includes manipulation of EUT interface cables)
Frequency
Level
Pol
Azimuth
FCC 15.209 / RSS 210 Detector
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
-12.6
112.935
30.9
43.5
QP
45
933.500
32.4
46.0
-13.6
QP
245
799.457
30.6
46.0
-15.4
QP
151
497.952
32.2
46.0
-13.8
QP
198
399.925
33.3
46.0
-12.7
QP
182
999.347
32.4
54.0
-21.6
QP
179
Note 1:
R95717
Height
meters
1.00
1.58
1.04
1.00
1.00
1.00
Extrapolation Factor
0.0
Comments
Note 1
Note 1
Note 1
Emission in non-restricted band, but limit of 15.209 used.
RE 30-1000 MHz (Module)
Page 203
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95472
Christine Krebill
N/A
Run #3: Preliminary Radiated Emissions, 30 - 1000 MHz
Configured to Tx , 802.11a, 16.5 dBm on each chain (settings 25.5, 26.0) on channel 116, Bluetooth 4.7 dBm, 1Mb/s (setting 10
dBm) on Channel 78.
Frequency Range
30 - 1000 MHz
Test Parameters for Preliminary Scan(s)
Prescan Distance
Limit Distance
Preliminary peak readings captured during pre-scan
Level
Pol
FCC 15.209 / RSS 210 Detector
Frequency
v/h
Limit
Margin Pk/QP/Avg
MHz
dBV/m
111.643
33.8
43.5
-9.7
Peak
-7.5
46.0
Peak
399.339
38.5
-11.2
46.0
Peak
498.477
34.8
-14.6
46.0
Peak
797.836
31.4
-12.3
33.7
46.0
Peak
935.852
34.4
54.0
-19.6
Peak
996.112
Note 1:
R95717
Azimuth
degrees
89
169
199
79
249
319
Height
meters
3.0
1.0
1.0
1.0
1.0
1.0
Extrapolation Factor
0.0
Comments
Note 1
Note 1
Note 1
Note 1
Emission in non-restricted band, but limit of 15.209 used.
RE 30-1000 MHz (Module)
Page 204
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Preliminary quasi-peak readings (no manipulation of EUT interface cables)
FCC 15.209 / RSS 210 Detector
Frequency
Level
Pol
Azimuth
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
Height
meters
J94914
T95472
Christine Krebill
N/A
Comments
Run #4: Maximized Readings From Run #3
Frequency Range
30 - 1000 MHz
Test Parameters for Maximized Reading(s)
Test Distance
Limit Distance
Maximized quasi-peak readings (includes manipulation of EUT interface cables)
FCC 15.209 / RSS 210 Detector
Frequency
Level
Pol
Azimuth
v/h
Limit
Margin Pk/QP/Avg degrees
MHz
dBV/m
R95717
RE 30-1000 MHz (Module)
Height
meters
Extrapolation Factor
0.0
Comments
Page 205
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95472
Christine Krebill
N/A
Conducted Emissions
(Elliott Laboratories Fremont Facility, Semi-Anechoic Chamber)
Test Specific Details
Objective: The objective of this test session is to perform final qualification testing of the EUT with respect to the
specification listed above.
Date of Test: 6/20/2014
Test Engineer: Jack Liu
Test Location: FT Chamber# 4
Config. Used: 1
Config Change: None
Host Unit Voltage 120V/60Hz
General Test Configuration
The EUT on the test fixture and other support equipment was located on a wooden table inside the semi-anechoic chamber, 40 cm from a
vertical coupling plane and 80cm from the LISN. A second LISN was used for all local support equipment. Remote suppor
Ambient Conditions:
Temperature:
24 °C
Rel Humidity:
Rel.
38 %
Summary of Results
Run #
Test Performed
CE, AC Power,120V/60Hz
Limit
RSS 210 / 15.207
Result
Pass
Margin
62.0 dBµ V @ 0.152 MHz (-3.9 dB)
Modifications Made During Testing
No modifications were made to the EUT during testing
Deviations From The Standard
No deviations were made from the requirements of the standard.
Sample Notes
MAC Address: 001500F15B3A DRTU Tool Version 1.7.3-935 Driver version 17.1.0.11
R95717
CE Power (Module)
Page 206
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95472
Christine Krebill
N/A
Run #1: AC Power Port Conducted Emissions, 0.15 - 30MHz, 120V/60Hz
Configured to Tx , 802.11a, 16.5 dBm on each chain (settings 25.5, 26.0) on channel 116, Bluetooth 5.1dBm, 1Mb/s (setting 10
dBm) on Mid Channel (2440MHz).
R95717
CE Power (Module)
Page 207
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
J94914
T95472
Christine Krebill
N/A
Preliminary peak readings captured during pre-scan (peak readings vs. average limit)
Frequency
Level
AC
Detector Comments
RSS 210 / 15.207
Line
Limit
Margin
QP/Ave
MHz
dBV
0.200
57.1
Neutral
53.6
3.5
Peak
0.150
63.2
Neutral
55.8
7.4
Peak
0.162
56.2
Neutral
55.2
1.0
Peak
0.188
53.9
Neutral
54.2
-0.3
Peak
0.207
55.0
Neutral
53.3
1.7
Peak
0.219
51.3
Neutral
52.9
-1.6
Peak
0.251
49.3
Neutral
51.7
-2.4
Peak
0.152
63.6
Line
56.0
7.6
Peak
0.160
61.9
Line
55.6
6.3
Peak
0.174
57.7
Line
54.8
2.9
Peak
0.198
57.0
Line
53.6
3.4
Peak
0.190
54.0
Line
54.0
0.0
Peak
0.210
52.0
Line
53.1
-1.1
Peak
0.222
51.9
Line
52.8
-0.9
Peak
0.246
51.2
Line
51.9
-0.7
Peak
R95717
CE Power (Module)
Page 208
EMC Test Data
Client: Intel Corporation
Job Number:
T-Log Number:
Project Manager:
Project Coordinator:
Class:
Model: 7265D2W
Contact: Steve Hackett
Standard: FCC Part 15.247, 15.407, RSS-210
Final quasi-peak and average readings
Level
AC
RSS 210 / 15.207
Frequency
Line
Limit
Margin
MHz
dBV
0.152
62.0
-3.9
Line
65.9
0.152
47.8
Line
55.9
-8.1
0.200
54.7
Neutral
63.6
-8.9
0.198
54.4
Line
63.7
-9.3
0.160
46.1
Line
55.5
-9.4
0.160
56.0
Line
65.5
-9.5
0.162
55.3
Neutral
65.4
-10.1
0.210
51.6
Line
63.2
-11.6
0.190
52.3
Line
64.0
-11.7
0.162
43.1
Neutral
55.4
-12.3
0.174
51.9
Line
64.8
-12.9
0.150
52.9
Neutral
66.0
-13.1
0.207
50.1
Neutral
63.3
-13.2
0.200
39.6
Neutral
53.6
-14.0
0.188
50.1
Neutral
64.1
-14.0
0.246
47.7
Line
61.9
-14.2
00.251
251
47
Neutral
61
-14
47.2
61.7
14.55
0.174
39.2
Line
54.8
-15.6
0.198
37.9
Line
53.7
-15.8
0.210
36.8
Line
53.2
-16.4
0.150
39.0
Neutral
56.0
-17.0
0.219
45.2
Neutral
62.9
-17.7
0.222
44.8
Line
62.7
-17.9
0.207
34.7
Neutral
53.3
-18.6
0.251
32.0
Neutral
51.7
-19.7
0.190
34.2
Line
54.0
-19.8
0.188
34.1
Neutral
54.1
-20.0
0.219
32.5
Neutral
52.9
-20.4
0.246
31.5
Line
51.9
-20.4
0.222
30.9
Line
52.7
-21.8
R95717
Detector
QP/Ave
QP
AVG
QP
QP
AVG
QP
QP
QP
QP
AVG
QP
QP
QP
AVG
QP
QP
QP
AVG
AVG
AVG
AVG
QP
QP
AVG
AVG
AVG
AVG
AVG
AVG
AVG
J94914
T95472
Christine Krebill
N/A
Comments
QP (1.00s)
AVG (0.10s)
QP (1.00s)
QP (1.00s)
AVG (0.10s)
QP (1.00s)
QP (1.00s)
QP (1.00s)
QP (1.00s)
AVG (0.10s)
QP (1.00s)
QP (1.00s)
QP (1.00s)
AVG (0.10s)
QP (1.00s)
QP (1.00s)
QP (1
00s)
(1.00s)
AVG (0.10s)
AVG (0.10s)
AVG (0.10s)
AVG (0.10s)
QP (1.00s)
QP (1.00s)
AVG (0.10s)
AVG (0.10s)
AVG (0.10s)
AVG (0.10s)
AVG (0.10s)
AVG (0.10s)
AVG (0.10s)
CE Power (Module)
Page 209
National Technical Systems - Silicon Valley -- EMC Department
Test Report
Report Date: July 8, 2014
End of Report
This page is intentionally blank and
marks the last page of this test report.
File: R95717
Page 210
Download: WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Mirror Download [FCC.gov]WB0105 Stylistic Q Series Tablet PC Test Report FCC/Canada Radio report Fujitsu Limited
Document ID3767615
Application IDrwoU5KYLb+Ea7sIjLtOGxA==
Document Description7265D2W_TestRpt_DTS
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize152.04kB (1900503 bits)
Date Submitted2018-03-02 00:00:00
Date Available2018-03-06 00:00:00
Creation Date2018-03-06 17:23:55
Producing SoftwareGPL Ghostscript 9.21
Document Lastmod2018-03-06 17:23:55
Document TitleFCC/Canada Radio report
Document CreatorAcrobat PDFMaker 11 for Word
Document Author: David Bare and Dave Guidotti

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Address                         : 100 Center Point Circle, Suite 200
Author                          : David Bare and Dave Guidotti
City                            : Columbia
Client                          : Steven Hackett
Company                         : National Technical Systems - Silicon Valley
Company Name                    : Intel Mobile Communications
Create Date                     : 2014:07:14 16:19:39-07:00
Date Completed                  : July 8, 2014
Document Number                 : R95717
Manager                         : Gaylon Morris
Modify Date                     : 2017:05:31 23:47:37+08:00
Model Number                    : 7265D2W
Project                         : 
Reviewer Title                  : Chief Engineer
Reviewing Engineer              : David W. Bare
Sample Date                     : June 5, 2014
Source Modified                 : D:20140714231932
State                           : SC
Subject                         : FCC and IC Radio report Part 15c, 15E, RSS 210, RSS 310
Test Date                       : June 5 through June 20, 2014
Zip Code                        : 29210, USA
Language                        : EN-US
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Metadata Date                   : 2017:05:31 23:47:37+08:00
Creator Tool                    : Acrobat PDFMaker 11 for Word
Document ID                     : uuid:6155d3ba-2fbe-4f3b-838e-de0183e6c4ab
Instance ID                     : uuid:803d725e-0003-4f01-a0b1-0af1cb2ebd2c
Format                          : application/pdf
Title                           : FCC/Canada Radio report
Description                     : FCC and IC Radio report Part 15c, 15E, RSS 210, RSS 310
Creator                         : David Bare and Dave Guidotti
Producer                        : Adobe PDF Library 11.0
Keywords                        : 
Sample 0020 Date                : June 5, 2014
Test 0020 Date                  : June 5 through June 20, 2014
Model 0020 Number               : 7265D2W
Company 0020 Name               : Intel Mobile Communications
Zip 0020 Code                   : 29210, USA
Date 0020completed              : July 8, 2014
Document 0020number             : R95717
Reviewing 0020 Engineer         : David W. Bare
Reviewer 0020 Title             : Chief Engineer
Headline                        : FCC and IC Radio report Part 15c, 15E, RSS 210, RSS 310
Page Layout                     : OneColumn
Page Count                      : 210
EXIF Metadata provided by EXIF.tools

Facebook Twitter Google+ RSS © FCCID.io 2018