FCC ID EJE-WL0028

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669

Date of Grant: 08/22/2012 Application Dated: 08/22/2012

Fujitsu Limited

1-1, Kamikodanaka 4-chome,

Nakahara-ku, Kawasaki, 211-8588 Japan

Attention: Mr. Tsuyoshi Uchihara , Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EJE-WL0028
Name of Grantee:	Fujitsu Limited
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	TAYLOR PEAK 62205ANHMW WLAN IN Q702 STYLISTIC

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.032
CC MO	15E	5260.0  -  5320.0	0.028
CC MO ND	15E	5190.0  -  5230.0	0.03
CC MO ND	15E	5270.0  -  5310.0	0.029
CC MO ND	15E	5500.0  -  5700.0	0.033
CC MO ND	15E	5510.0  -  5670.0	0.034

Power Output listed is conducted.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within this host device except as described in this filing with already approved Bluetooth module FCC ID: QDS-BRCM1043 and in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. The highest reported SAR value is 1.19 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Fujitsu Limited 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki, 211-8588 Japan

Date of Grant: 08/22/2012 Application Dated: 08/22/2012

Attention: Mr. Tsuyoshi Uchihara , Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EJE-WL0028
Name of Grantee:	Fujitsu Limited
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	TAYLOR PEAK 62205ANHMW WLAN IN Q702 STYLISTIC
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.032
CC MO	15E	5260.0  -  5320.0	0.028
CC MO ND	15E	5190.0  -  5230.0	0.03
CC MO ND	15E	5270.0  -  5310.0	0.029
CC MO ND	15E	5500.0  -  5700.0	0.033
CC MO ND	15E	5510.0  -  5670.0	0.034

Power Output listed is conducted.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within this host device except as described in this filing with already approved Bluetooth module FCC ID: QDS-BRCM1043 and in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. The highest reported SAR value is 1.19 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application AtC0OhWjF2HNte92JSbs4g==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669

Date of Grant: 08/22/2012 Application Dated: 08/22/2012

Fujitsu Limited

1-1, Kamikodanaka 4-chome,

Nakahara-ku, Kawasaki, 211-8588 Japan

Attention: Mr. Tsuyoshi Uchihara , Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EJE-WL0028
Name of Grantee:	Fujitsu Limited
Equipment Class:	Digital Transmission System
Notes:	TAYLOR PEAK 62205ANHMW WLAN IN Q702 STYLISTIC

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.117
CC MO	15C	2422.0  -  2452.0	0.032
CC MO	15C	5745.0  -  5825.0	0.036
CC MO	15C	5755.0  -  5795.0	0.12

Power Output listed is conducted. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within this host device except as described in this filing with already approved Bluetooth module FCC ID: QDS-BRCM1043 and in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. The highest reported SAR value is 1.16 mW/g.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Fujitsu Limited 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki, 211-8588 Japan

Date of Grant: 08/22/2012 Application Dated: 08/22/2012

Attention: Mr. Tsuyoshi Uchihara , Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	EJE-WL0028
Name of Grantee:	Fujitsu Limited
Equipment Class:	Digital Transmission System
Notes:	TAYLOR PEAK 62205ANHMW WLAN IN Q702 STYLISTIC
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.117
CC MO	15C	2422.0  -  2452.0	0.032
CC MO	15C	5745.0  -  5825.0	0.036
CC MO	15C	5755.0  -  5795.0	0.12

Power Output listed is conducted. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within this host device except as described in this filing with already approved Bluetooth module FCC ID: QDS-BRCM1043 and in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. The highest reported SAR value is 1.16 mW/g.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: