FCC ID EO9CCU100B
Automatic Meter Reading Pole Top Reader
by Itron, Inc.
Grantee Code: EO9 Product Code: CCU100B
Latest application date: 2021-02-17
Device Images
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 903-926.8 MHz | Class II permissive change or modification of presently authorized equipment | 2021-02-17 |
| 903-926.9 MHz | Class II permissive change or modification of presently authorized equipment | 2016-09-08 |
| 903-926.9 MHz | Class II permissive change or modification of presently authorized equipment | 2012-10-08 |
| 903-926.8 MHz | Original Equipment | 2011-10-05 |
| 2412-2462 MHz | Original Equipment | 2011-10-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2021-02-17 | PDF 4.2 MB |
| Users Manual | Users Manual | 2016-09-08 | PDF 5.5 MB |
| Users Manual | Users Manual | 2011-10-05 | PDF 3.6 MB |
| Internal Photos | Internal Photos | 2021-02-17 | PDF 528.1 KB |
| Internal Photos | Internal Photos | 2016-09-08 | PDF 186.9 KB |
| Internal Photos | Internal Photos | 2011-10-05 | PDF 2.9 MB |
| External Photos 1 | External Photos | 2011-10-05 | PDF 2.9 MB |
| External Photos 2 | External Photos | 2011-10-05 | PDF 2.9 MB |
| External Photos 3 | External Photos | 2011-10-05 | PDF 2.7 MB |
| External Photos 4 | External Photos | 2011-10-05 | PDF 2.9 MB |
| External Phptos 1 | External Photos | 2011-10-05 | PDF 2.9 MB |
| ID Label | ID Label/Location Info | 2021-02-17 | PDF 283.2 KB |
| ID Label | ID Label/Location Info | 2016-09-08 | PDF 65.3 KB |
| ID Label | ID Label/Location Info | 2011-10-05 | PDF 502 KB |
| Label location | ID Label/Location Info | 2011-10-05 | PDF 46.3 KB |
| Test Setup Photos | Test Setup Photos | 2016-09-08 | PDF 349.3 KB |
| Test Setup Photos | Test Setup Photos | 2012-10-08 | PDF 130.7 KB |
| Set Up Photos | Test Setup Photos | 2011-10-05 | PDF 347.6 KB |
| Set Up Photos | Test Setup Photos | 2011-10-05 | PDF 281.7 KB |
| Test Report | Test Report | 2021-02-17 | PDF 3.1 MB |
| Test Report | Test Report | 2016-09-08 | PDF 1.6 MB |
| Test Report | Test Report | 2012-10-08 | PDF 173.6 KB |
| Test Report Band Edge | Test Report | 2012-10-08 | PDF 1 MB |
| Test Report 1 | Test Report | 2011-10-05 | PDF 2.4 MB |
| Test Report 2 | Test Report | 2011-10-05 | PDF 4.3 MB |
| Test Report Part 1 | Test Report | 2011-10-05 | PDF 3.7 MB |
| Test Report Part 2 | Test Report | 2011-10-05 | PDF 2.5 MB |
| Confidentiality Letter | Cover Letter(s) | 2021-02-17 | PDF 55.1 KB |
| Cover Letter | Cover Letter(s) | 2021-02-17 | PDF 104.7 KB |
| PCII Letter | Cover Letter(s) | 2021-02-17 | PDF 55.8 KB |
| Cover Letter | Cover Letter(s) | 2016-09-08 | PDF 119.4 KB |
| Confidentiality Request | Cover Letter(s) | 2012-10-08 | PDF 71.2 KB |
| Cover Letter | Cover Letter(s) | 2012-10-08 | PDF 69.4 KB |
| TCB Correspondence | Cover Letter(s) | 2012-10-08 | PDF 57.9 KB |
| Conf. Letter | Cover Letter(s) | 2011-10-05 | PDF 64.7 KB |
| Conf. Request | Cover Letter(s) | 2011-10-05 | PDF 64.7 KB |
| Cover Letter | Cover Letter(s) | 2011-10-05 | PDF 64.6 KB |
| Professional intsall | Cover Letter(s) | 2011-10-05 | PDF 84.5 KB |
| cover letter | Cover Letter(s) | 2011-10-05 | PDF 64.6 KB |
| prof. install letter | Cover Letter(s) | 2011-10-05 | PDF 84.5 KB |
| RF Exposure Info | RF Exposure Info | 2021-02-17 | PDF 758.4 KB |
| Rf Exposure Info | RF Exposure Info | 2016-09-08 | PDF 1.1 MB |
| RF Exposure Info | RF Exposure Info | 2012-10-08 | PDF 124.9 KB |
| RF Exposure | RF Exposure Info | 2011-10-05 | PDF 102.2 KB |
| Rf Exposure | RF Exposure Info | 2011-10-05 | PDF 92.8 KB |
| Operational Description Metadata only | Operational Description | PDF 80.2 KB |
Application Information
| Application ID | l42GpqJ1kDPXohL91/BJCA== |
|---|---|
| Final Action Date | 2021-02-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005861034 |
| Model | CCU100B |
| Frequency Range | 903-926.8 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Automatic Meter Reading Pole Top Reader |
| Responsible Party | Jay R. Holcomb, R&D; Spectrum Regulatory, jay.holcomb@itron.com |
| Technical Contact | James Anselmo, Itron, Inc., james.anselmo@itron.com |
| Test Firm | Steve Behm, CKC Laboratories, Inc., qa@ckc.com |
| TCB Email | tcbinfo@ckc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC to add antenna and product modification. Power listed is conducted. Professional installation required. Approved for collocated transmitters as listed in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| l42GpqJ1kDPXohL91/BJCA== | 2021-02-17 | Class II permissive change or modification of presently authorized equipment |
| UY2wiu5Utw22LBZpZlpCCg== | 2016-09-08 | Class II permissive change or modification of presently authorized equipment |
| qBrkxB0WJsKFcAaXaYPs7Q== | 2012-10-08 | Class II permissive change or modification of presently authorized equipment |
| 8OFPQmr6eB3ZzBStstfA+A== | 2011-10-05 | Original Equipment |
| 3PMEBelEZnMKIAtNfWdXWg== | 2011-10-05 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application UY2wiu5Utw22LBZpZlpCCg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 09/08/2016 Application Dated: 08/30/2016 |
| Itron, Inc. |
| 2111 N. Molter Road |
| Liberty Lake, WA 99019 |
| Attention: Jay Holcomb , R&D Spectrum Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EO9CCU100B |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AMR transceiver device for utility meters |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 903.0 - 926.9 | 0.933 |
| C2PC to add antenna and product modification. Power listed is conducted. Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Certain antennas used with this equipment require a minimum insertion loss, or have output power limitations as documented in the application. Approved for use with antenna(s) as listed in this filing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application UY2wiu5Utw22LBZpZlpCCg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron, Inc. 2111 N. Molter Road Liberty Lake, WA 99019 United States |
Date of Grant: 09/08/2016 Application Dated: 08/30/2016 |
| Attention: Jay Holcomb , R&D Spectrum Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EO9CCU100B |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AMR transceiver device for utility meters |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 903.0 - 926.9 | 0.933 |
| C2PC to add antenna and product modification. Power listed is conducted. Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Certain antennas used with this equipment require a minimum insertion loss, or have output power limitations as documented in the application. Approved for use with antenna(s) as listed in this filing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 10/08/2012 Application Dated: 10/06/2012 |
| Itron, Inc. |
| 2111 N. Molter Road |
| Liberty Lake, WA 99019 |
| Attention: Jay Holcomb , R&D Manager, Regulatory and Programs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EO9CCU100B |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AMR transceiver device for reading utility meter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 903.0 - 926.9 | 0.933 |
| C2PC for operational characteristics. Power listed is conducted. Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application qBrkxB0WJsKFcAaXaYPs7Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron, Inc. 2111 N. Molter Road Liberty Lake, WA 99019 United States |
Date of Grant: 10/08/2012 Application Dated: 10/06/2012 |
| Attention: Jay Holcomb , R&D Manager, Regulatory and Programs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EO9CCU100B |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AMR transceiver device for reading utility meter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 903.0 - 926.9 | 0.933 |
| C2PC for operational characteristics. Power listed is conducted. Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 02/17/2021 Application Dated: 02/15/2021 |
| Itron, Inc. |
| 2111 N. Molter Road |
| Liberty Lake, WA 99019 |
| Attention: Jay Holcomb , R&D Spectrum Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EO9CCU100B |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Automatic Meter Reading Pole Top Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 36 | 15C | 903.0 - 926.8 | 0.933 |
| C2PC to add antenna and product modification. Power listed is conducted. Professional installation required. Approved for collocated transmitters as listed in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
EAS Grant - Application l42GpqJ1kDPXohL91/BJCA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron, Inc. 2111 N. Molter Road Liberty Lake, WA 99019 United States |
Date of Grant: 02/17/2021 Application Dated: 02/15/2021 |
| Attention: Jay Holcomb , R&D Spectrum Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EO9CCU100B |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Automatic Meter Reading Pole Top Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 36 | 15C | 903.0 - 926.8 | 0.933 |
| C2PC to add antenna and product modification. Power listed is conducted. Professional installation required. Approved for collocated transmitters as listed in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 10/05/2011 Application Dated: 09/28/2011 |
| Itron, Inc. |
| 2111 N. Molter Road |
| Liberty Lake, WA 99019 |
| Attention: Jay Holcomb , R&D Manager, Regulatory and Programs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EO9CCU100B |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AMR transceiver device for reading utlity meter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 903.0 - 926.8 | 0.933 |
| Power listed is conducted. Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application 8OFPQmr6eB3ZzBStstfA+A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron, Inc. 2111 N. Molter Road Liberty Lake, WA 99019 United States |
Date of Grant: 10/05/2011 Application Dated: 09/28/2011 |
| Attention: Jay Holcomb , R&D Manager, Regulatory and Programs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EO9CCU100B |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AMR transceiver device for reading utlity meter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 903.0 - 926.8 | 0.933 |
| Power listed is conducted. Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 10/05/2011 Application Dated: 09/28/2011 |
| Itron, Inc. |
| 2111 N. Molter Road |
| Liberty Lake, WA 99019 |
| Attention: Jay Holcomb , R&D Manager, Regulatory and Programs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EO9CCU100B |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | AMR transceiver device for reading utility meter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2412.0 - 2462.0 | 0.126 |
| Power listed is conducted. Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application 3PMEBelEZnMKIAtNfWdXWg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Itron, Inc. 2111 N. Molter Road Liberty Lake, WA 99019 United States |
Date of Grant: 10/05/2011 Application Dated: 09/28/2011 |
| Attention: Jay Holcomb , R&D Manager, Regulatory and Programs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EO9CCU100B |
| Name of Grantee: | Itron, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | AMR transceiver device for reading utility meter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2412.0 - 2462.0 | 0.126 |
| Power listed is conducted. Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |














