FCC ID EOT-1409123000

2.5 GHz Wireless Broadband Route

by CALAMP WIRELESS NETWORKS INC.

Grantee Code: EOT   Product Code: 1409123000
Latest application date: 2011-05-16

FCC ID Device Details

FCC IDEOT-1409123000
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeEOT
Product Code1409123000
Applicant BusinessCALAMP WIRELESS NETWORKS INC. 🇺🇸
Related Domains calamp.com
Equipment Class2.5 GHz Wireless Broadband Route
Test FirmMET Laboratories, Incorporated

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2498.5-2687.5 MHzOriginal Equipment2011-05-16

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2011-05-16PDF 1.6 MB
Internal PhotosInternal Photos2011-05-16PDF 5.3 MB
External PhotosExternal Photos2011-05-16PDF 1.1 MB
Label and LocationID Label/Location Info2011-05-16PDF 775.8 KB
Test Setup PhotosTest Setup Photos2011-05-16PDF 358.8 KB
Test ReportTest Report2011-05-16PDF 1.8 MB
Confidentiality Request LetterCover Letter(s)2011-05-16PDF 86.1 KB
Antenna DatasheetRF Exposure Info2011-05-16PDF 50.4 KB

Application Information

Application IDXOKsNc4Up7b8sqD1ZDGvCA==
Final Action Date2011-05-16
Application PurposeOriginal Equipment
Applicant FRN0004069472
Model-1409123000
Frequency Range2498.5-2687.5 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device Description2.5 GHz Wireless Broadband Route
Responsible PartyRussell Cook, Director of Engineer, rcook@calamp.com , 612-642-2127
Technical ContactRichard Vallee, CalAmp Wireless Networks Inc., rvallee@calamp.com , 514 737 0020
Non-Technical ContactPierre Olivier, CalAmp Wireless Networks Inc., polivier@calamp.com , 514 737 0020
Test FirmRobert Frier, MET Laboratories, Incorporated, rfrier@metlabs.com , 410-949-1805
TCB Emailtcbinfo@metlabs.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is maximum combined conducted. Maximum combined radiated output power may not exceed 2 W EIRP for mobile installations and 40W EIRP for fixed installations. Professional installation is required. The antennas used for this transmitter must not be co-located with antennas of other transmitters except in accordance with multi-transmitter product procedures. Grantee is responsible for installation and operation in compliance with modular and RF exposure procedures for any operation in conjunction with other transmitters. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The maximum 5dBi antennas described in this filing must be installed to provide a separation distance of at least 21.75 cm from all persons.

Applications

Application IDDatePurpose
XOKsNc4Up7b8sqD1ZDGvCA==2011-05-16Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
2498.5-2687.5 MHz1.621ppm4M45W7D2736
2498.5-2687.5 MHz1.871ppm9M15W7D2736

Grants

TCB Grant - Application XOKsNc4Up7b8sqD1ZDGvCA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 05/16/2011

Application Dated: 05/16/2011
CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOT-1409123000
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 2.5 GHz Wireless Broadband Route
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 27 2498.5  -  2687.5 1.62 1.0  PM 4M45W7D
36 27 2498.5  -  2687.5 1.87 1.0  PM 9M15W7D

Power listed is maximum combined conducted. Maximum combined radiated output power may not exceed 2 W EIRP for mobile installations and 40W EIRP for fixed installations. Professional installation is required. The antennas used for this transmitter must not be co-located with antennas of other transmitters except in accordance with multi-transmitter product procedures. Grantee is responsible for installation and operation in compliance with modular and RF exposure procedures for any operation in conjunction with other transmitters. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The maximum 5dBi antennas described in this filing must be installed to provide a separation distance of at least 21.75 cm from all persons.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.

EAS Grant - Application XOKsNc4Up7b8sqD1ZDGvCA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States
  Date of Grant: 05/16/2011

Application Dated: 05/16/2011
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOT-1409123000
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 2.5 GHz Wireless Broadband Route
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 27 2498.5  -  2687.5 1.62 1.0  PM 4M45W7D
36 27 2498.5  -  2687.5 1.87 1.0  PM 9M15W7D

Power listed is maximum combined conducted. Maximum combined radiated output power may not exceed 2 W EIRP for mobile installations and 40W EIRP for fixed installations. Professional installation is required. The antennas used for this transmitter must not be co-located with antennas of other transmitters except in accordance with multi-transmitter product procedures. Grantee is responsible for installation and operation in compliance with modular and RF exposure procedures for any operation in conjunction with other transmitters. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The maximum 5dBi antennas described in this filing must be installed to provide a separation distance of at least 21.75 cm from all persons.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.

Mail To: