1. FCC ID
  2. EOT
  3. EOTBDD4T85-3

FCC ID EOTBDD4T85-3

Paragon/PD

by CALAMP WIRELESS NETWORKS INC.

Grantee Code: EOT   Product Code: BDD4T853
Latest application date: 2004-08-27

FCC ID Device Details

FCC IDEOTBDD4T85-3
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeEOT
Product CodeBDD4T853
Applicant BusinessCALAMP WIRELESS NETWORKS INC. 🇺🇸
Related Domains calamp.com
Equipment ClassParagon/PD

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
480-520 MHzClass II permissive change or modification of presently authorized equipment2004-08-27
480-520 MHzClass II permissive change or modification of presently authorized equipment2004-03-17
480-520 MHzClass II permissive change or modification of presently authorized equipment2003-01-21
480-520 MHzClass II permissive change or modification of presently authorized equipment2002-01-10
480-520 MHzClass II permissive change or modification of presently authorized equipment2001-05-29
480-520 MHzClass II permissive change or modification of presently authorized equipment2001-03-30
480-520 MHzChange in identification of presently authorized equipment. Original FCC ID: CASTEL0025 Grant Date: 01/19/19992001-02-21

Exhibits

DocumentTypeAvailableFile
preliminary user manualUsers Manual2004-08-27PDF 1.4 MB
IVIS option technical appendixUsers Manual2004-03-17PDF 108.2 KB
preliminary version 100aUsers Manual2003-01-21PDF 1.6 MB
preliminary version 202Users Manual2002-01-10PDF 1 MB
the technical manual a preliminary versionUsers Manual2001-05-29PDF 1 MB
Appendix A preliminary user manualUsers Manual2001-03-30PDF 2.6 MB
not required for this class II permissive changeInternal Photos2001-05-29PDF 19 KB
Appendix D component side picture of the exciter moduleInternal Photos2001-03-30PDF 336.5 KB
Appendix D soldering sideInternal Photos2001-03-30PDF 302.1 KB
Annex D Exciter component sideInternal Photos2001-02-21PDF 336.5 KB
Annex D Exciter soldering sideInternal Photos2001-02-21PDF 302.1 KB
The explanation provided with the previous Class II permissive change requestExternal Photos2001-05-29PDF 19 KB
Annex D Exciter front viewExternal Photos2001-02-21PDF 90.5 KB
Annex D PA front viewExternal Photos2001-02-21PDF 65.1 KB
not required for this class II permissive changeID Label/Location Info2001-05-29PDF 19 KB
Annex D Exciter rear viewID Label/Location Info2001-02-21PDF 183.5 KB
Annex D PA rear viewID Label/Location Info2001-02-21PDF 201.6 KB
not required for this class II permissive changeSchematics2001-05-29PDF 19 KB
Appendix B circuit descriptionSchematics2001-03-30PDF 533 KB
two point tx modulation balance procedureOperational Description2003-01-21PDF 156.9 KB
not required for this class II permissive changeOperational Description2001-05-29PDF 19 KB
Appendix C preliminary production procedureOperational Description2001-03-30PDF 929 KB
data for form 731 and the plot captures for mask complianceTest Report2004-08-27PDF 322.5 KB
occupied bandwidth and mask compliance dataTest Report2004-03-17PDF 198.9 KB
mask compliance plots and dataTest Report2003-01-21PDF 422 KB
mask C complianceTest Report2002-01-10PDF 380.5 KB
Emission designator and mask compliance dataTest Report2001-05-29PDF 400.5 KB
main engineering exhibit with test dataTest Report2001-03-30PDF 544.5 KB
request for confidentialityCover Letter(s)2004-08-27PDF 6.3 KB
engineering statementCover Letter(s)2004-03-17PDF 59.9 KB
data for 731 form including cover lettersCover Letter(s)2003-01-21PDF 121.4 KB
engineering statementCover Letter(s)2002-01-10PDF 54 KB
request for confidentialityCover Letter(s)2001-03-30PDF 2.3 KB
request for confidentialityCover Letter(s)2001-02-21PDF 19.5 KB
not required for this class II permissive changeParts List/Tune Up Info2001-05-29PDF 19 KB
Annex A modulation source description Metadata onlyOperational DescriptionPDF 178.1 KB
Appendix E digital modulation source description Metadata onlyOperational DescriptionPDF 36 KB

Application Information

Application IDdR3U0CHBG0UUkQqLfarnIg==
Final Action Date2004-08-27
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0004069472
ModelBDD4T85-3
Frequency Range480-520 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionParagon/PD
Responsible PartyRussell Cook, Director of Engineer, rcook@calamp.com , 612-642-2127
Technical ContactConstantin Pintilei, Dataradio Inc, cpintilei@dataradio.com , +1-514-737-0020
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput is peak conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 100 W. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
dR3U0CHBG0UUkQqLfarnIg==2004-08-27Class II permissive change or modification of presently authorized equipment
V7rlNsCknjaPvWsjet2rgQ==2004-03-17Class II permissive change or modification of presently authorized equipment
qofEhS6eKo9ZB/rbRrR/fQ==2003-01-21Class II permissive change or modification of presently authorized equipment
eUcy9UEEjiJJKVutA42kEg==2002-01-10Class II permissive change or modification of presently authorized equipment
i73R4hNPA0uRxnNYcOkaZg==2001-05-29Class II permissive change or modification of presently authorized equipment
JMpURnomqRjwLnTkLEWvTQ==2001-03-30Class II permissive change or modification of presently authorized equipment
f2n/AsabD5IkHC84moL+Pg==2001-02-21Change in identification of presently authorized equipment. Original FCC ID: CASTEL0025 Grant Date: 01/19/1999

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
480-520 MHz1001ppm15K9F1D9BF
480-520 MHz1001ppm10K8F3E22, 90.21BF
480-520 MHz1001ppm8K33F1D90.21BF
480-520 MHz1001ppm16K5F1D9BF
480-520 MHz1001ppm16K7F1D9BF
480-520 MHz1001ppm16K2F1D9BF
480-520 MHz1001ppm8K50F1D90.21BF
480-520 MHz1001ppm8K67F1D90.21BF
480-520 MHz1001ppm8K00F1D90.21BF
480-520 MHz1001ppm15K7F3E22, 9BF
480-520 MHz1001ppm15K7F3E9BF
480-520 MHz1001ppm14K3F1D22, 9BF
480-520 MHz1001ppm14K3F1D9BF
480-520 MHz1001ppm8K83F1D90.21BF
480-520 MHz1001ppm15K9F1D22, 9BF
480-520 MHz1001ppm10K7F3E9BF
480-520 MHz1001ppm7K00F1D22, 90.21BF
480-520 MHz1001ppm7K17F1D90.21BF
480-520 MHz1001ppm7K50F1D22, 90.21BF
480-520 MHz1001ppm11K4F1D9BF
480-520 MHz1001ppm16K5F1D22, 9BF
480-520 MHz1001ppm14K9F1D9BF

Grants

TCB Grant - Application V7rlNsCknjaPvWsjet2rgQ==

This application does not exist.

EAS Grant - Application V7rlNsCknjaPvWsjet2rgQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 03/17/2004

Application Dated: 01/27/2004
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTBDD4T85-3
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Paragon/PD
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BF 90.210 480.0  -  520.0 100.0 1.0  PM 7K17F1D
BF 90.210 480.0  -  520.0 100.0 1.0  PM 8K00F1D
BF 90.210 480.0  -  520.0 100.0 1.0  PM 8K33F1D
BF 90.210 480.0  -  520.0 100.0 1.0  PM 8K83F1D
BF 90 480.0  -  520.0 100.0 1.0  PM 10K7F3E
BF 90 480.0  -  520.0 100.0 1.0  PM 15K7F3E
BF 90 480.0  -  520.0 100.0 1.0  PM 11K4F1D
BF 90 480.0  -  520.0 100.0 1.0  PM 14K3F1D
BF 90 480.0  -  520.0 100.0 1.0  PM 14K9F1D
BF 90 480.0  -  520.0 100.0 1.0  PM 15K9F1D
BF 90 480.0  -  520.0 100.0 1.0  PM 16K5F1D
BF 90 480.0  -  520.0 100.0 1.0  PM 16K7F1D


BF: The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed.

TCB Grant - Application qofEhS6eKo9ZB/rbRrR/fQ==

This application does not exist.

EAS Grant - Application qofEhS6eKo9ZB/rbRrR/fQ==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 01/21/2003

Application Dated: 01/03/2003
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTBDD4T85-3
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: ParagonPD
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BF 90.210 480.0  -  520.0 100.0 1.0  PM 10K8F3E
BF 90 480.0  -  520.0 100.0 1.0  PM 15K7F3E
BF 90 480.0  -  520.0 100.0 1.0  PM 14K3F1D
BF 90 480.0  -  520.0 100.0 1.0  PM 15K9F1D
BF 90.210 480.0  -  520.0 100.0 1.0  PM 7K17F1D
BF 90.210 480.0  -  520.0 100.0 1.0  PM 8K00F1D
BF 90 480.0  -  520.0 100.0 1.0  PM 16K5F1D
BF 90 480.0  -  520.0 100.0 1.0  PM 16K7F1D
BF 90 480.0  -  520.0 100.0 1.0  PM 14K9F1D
BF 90.210 480.0  -  520.0 100.0 1.0  PM 8K33F1D


BF: The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed.

TCB Grant - Application JMpURnomqRjwLnTkLEWvTQ==

This application does not exist.

EAS Grant - Application JMpURnomqRjwLnTkLEWvTQ==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 03/30/2001

Application Dated: 02/22/2001
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTBDD4T85-3
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: ParagonPD
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BF 22, 90.210 480.0  -  520.0 100.0 1.0  PM 10K8F3E
BF 22, 90 480.0  -  520.0 100.0 1.0  PM 15K7F3E
BF 22, 90 480.0  -  520.0 100.0 1.0  PM 14K3F1D
BF 22, 90 480.0  -  520.0 100.0 1.0  PM 15K9F1D

Output is peak conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 100 W. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.


BF: The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed.

TCB Grant - Application i73R4hNPA0uRxnNYcOkaZg==

This application does not exist.

EAS Grant - Application i73R4hNPA0uRxnNYcOkaZg==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 05/29/2001

Application Dated: 05/07/2001
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTBDD4T85-3
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Paragon/PD
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BF 22, 90.210 480.0  -  520.0 100.0 1.0  PM 10K8F3E
BF 22, 90 480.0  -  520.0 100.0 1.0  PM 15K7F3E
BF 22, 90 480.0  -  520.0 100.0 1.0  PM 14K3F1D
BF 22, 90 480.0  -  520.0 100.0 1.0  PM 15K9F1D
BF 22, 90.210 480.0  -  520.0 100.0 1.0  PM 7K00F1D
BF 22, 90.210 480.0  -  520.0 100.0 1.0  PM 7K50F1D

Output is peak conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 100 W. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.


BF: The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed.

TCB Grant - Application f2n/AsabD5IkHC84moL+Pg==

This application does not exist.

EAS Grant - Application f2n/AsabD5IkHC84moL+Pg==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 02/21/2001

Application Dated: 12/21/2000
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTBDD4T85-3
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: ParagonPD
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BF 22, 90.210 480.0  -  520.0 100.0 1.0  PM 10K8F3E
BF 22, 90 480.0  -  520.0 100.0 1.0  PM 15K7F3E


BF: The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed.

TCB Grant - Application eUcy9UEEjiJJKVutA42kEg==

This application does not exist.

EAS Grant - Application eUcy9UEEjiJJKVutA42kEg==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 01/10/2002

Application Dated: 11/14/2001
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTBDD4T85-3
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes:
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BF 22, 90.210 480.0  -  520.0 100.0 1.0  PM 10K8F3E
BF 22, 90 480.0  -  520.0 100.0 1.0  PM 15K7F3E
BF 22, 90 480.0  -  520.0 100.0 1.0  PM 14K3F1D
BF 22, 90 480.0  -  520.0 100.0 1.0  PM 15K9F1D
BF 22, 90.210 480.0  -  520.0 100.0 1.0  PM 7K00F1D
BF 22, 90.210 480.0  -  520.0 100.0 1.0  PM 7K50F1D
BF 22, 90 480.0  -  520.0 100.0 1.0  PM 16K5F1D

Output is peak conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 100 W. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.


BF: The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed.

TCB Grant - Application dR3U0CHBG0UUkQqLfarnIg==

This application does not exist.

EAS Grant - Application dR3U0CHBG0UUkQqLfarnIg==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 08/27/2004

Application Dated: 07/21/2004
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTBDD4T85-3
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Paragon/PD
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BF 90.210 480.0  -  520.0 100.0 1.0  PM 7K17F1D
BF 90.210 480.0  -  520.0 100.0 1.0  PM 8K00F1D
BF 90.210 480.0  -  520.0 100.0 1.0  PM 8K33F1D
BF 90.210 480.0  -  520.0 100.0 1.0  PM 8K83F1D
BF 90 480.0  -  520.0 100.0 1.0  PM 10K7F3E
BF 90 480.0  -  520.0 100.0 1.0  PM 15K7F3E
BF 90 480.0  -  520.0 100.0 1.0  PM 11K4F1D
BF 90 480.0  -  520.0 100.0 1.0  PM 14K3F1D
BF 90 480.0  -  520.0 100.0 1.0  PM 14K9F1D
BF 90 480.0  -  520.0 100.0 1.0  PM 15K9F1D
BF 90 480.0  -  520.0 100.0 1.0  PM 16K5F1D
BF 90 480.0  -  520.0 100.0 1.0  PM 16K7F1D
BF 90 480.0  -  520.0 100.0 1.0  PM 16K2F1D
BF 90.210 480.0  -  520.0 100.0 1.0  PM 8K50F1D
BF 90.210 480.0  -  520.0 100.0 1.0  PM 8K67F1D

Output is peak conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 100 W. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.


BF: The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed.

Mail To: