FCC ID EOTBDP4-EXCT438

UHF HIGH SDR Exciter for BDP4 digital base station

by CALAMP WIRELESS NETWORKS INC.

Grantee Code: EOT   Product Code: BDP4EXCT438
Latest application date: 2010-06-04

FCC ID Device Details

FCC IDEOTBDP4-EXCT438
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeEOT
Product CodeBDP4EXCT438
Applicant BusinessCALAMP WIRELESS NETWORKS INC. 🇺🇸
Related Domains calamp.com
Equipment ClassUHF HIGH SDR Exciter for BDP4 digital base station
Test FirmNemko Canada Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
438-512 MHzOriginal Equipment2010-06-04

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2010-06-04PDF 3.2 MB
internal photosInternal Photos2010-06-04PDF 404 KB
external photosExternal Photos2010-06-04PDF 256.6 KB
label and locationID Label/Location Info2010-06-04PDF 618.9 KB
test reportTest Report2010-06-04PDF 2.1 MB
confidential letterCover Letter(s)2010-06-04PDF 84.9 KB
frequency listing letterCover Letter(s)2010-06-04PDF 101.3 KB
tune up procedureParts List/Tune Up Info2010-06-04PDF 77.1 KB

Application Information

Application IDOr0aFac91AfIiq7Oz913MQ==
Final Action Date2010-06-04
Application PurposeOriginal Equipment
Applicant FRN0004069472
ModelBDP4-EXCT438
Frequency Range438-512 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionUHF HIGH SDR Exciter for BDP4 digital base station
Responsible PartyRussell Cook, Director of Engineer, rcook@calamp.com , 612-642-2127
Technical ContactRichard Vallee, CalAmp Corp, rvallee@calamp.com , 514-737-0020
Non-Technical ContactPierre Olivier, CalAmp Corp, polivier@calamp.com , 514-737-0020
Test FirmStuart Beck, Nemko Canada Inc., stuart.beck@nemko.com , 613-737-9680
TCB Emailstuart.beck@nemko.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted and ranges from 0.004 to 0.4W max. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna collocation requirements of §1.1307(b)(3).

Applications

Application IDDatePurpose
Or0aFac91AfIiq7Oz913MQ==2010-06-04Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
438-512 MHz0.41ppm8K10F1D9
438-512 MHz0.41ppm7K80F1D9
438-512 MHz0.41ppm7K50F1D9
438-512 MHz0.41ppm16K0F1D9
438-512 MHz0.41ppm15K9F1D9
438-512 MHz0.41ppm15K8F1D9
438-512 MHz0.41ppm15K6F1D9
438-512 MHz0.41ppm14K7F1D9
438-512 MHz0.41ppm14K6F1D9
438-512 MHz0.41ppm13K8F1D9
438-512 MHz0.41ppm8K30F1D9

Grants

TCB Grant - Application Or0aFac91AfIiq7Oz913MQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 06/04/2010

Application Dated: 06/04/2010
CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTBDP4-EXCT438
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: UHF HIGH SDR Exciter for BDP4 digital base station
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 438.0  -  512.0 0.4 1.0  PM 16K1F1D
90 438.0  -  512.0 0.4 1.0  PM 16K0F1D
90 438.0  -  512.0 0.4 1.0  PM 15K9F1D
90 438.0  -  512.0 0.4 1.0  PM 15K8F1D
90 438.0  -  512.0 0.4 1.0  PM 15K6F1D
90 438.0  -  512.0 0.4 1.0  PM 14K7F1D
90 438.0  -  512.0 0.4 1.0  PM 14K6F1D
90 438.0  -  512.0 0.4 1.0  PM 13K8F1D
90 438.0  -  512.0 0.4 1.0  PM 8K30F1D
90 438.0  -  512.0 0.4 1.0  PM 8K10F1D
90 438.0  -  512.0 0.4 1.0  PM 7K80F1D
90 438.0  -  512.0 0.4 1.0  PM 7K50F1D

Power listed is conducted and ranges from 0.004 to 0.4W max. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna collocation requirements of §1.1307(b)(3).

EAS Grant - Application Or0aFac91AfIiq7Oz913MQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States
  Date of Grant: 06/04/2010

Application Dated: 06/04/2010
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTBDP4-EXCT438
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: UHF HIGH SDR Exciter for BDP4 digital base station
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 438.0  -  512.0 0.4 1.0  PM 16K1F1D
90 438.0  -  512.0 0.4 1.0  PM 16K0F1D
90 438.0  -  512.0 0.4 1.0  PM 15K9F1D
90 438.0  -  512.0 0.4 1.0  PM 15K8F1D
90 438.0  -  512.0 0.4 1.0  PM 15K6F1D
90 438.0  -  512.0 0.4 1.0  PM 14K7F1D
90 438.0  -  512.0 0.4 1.0  PM 14K6F1D
90 438.0  -  512.0 0.4 1.0  PM 13K8F1D
90 438.0  -  512.0 0.4 1.0  PM 8K30F1D
90 438.0  -  512.0 0.4 1.0  PM 8K10F1D
90 438.0  -  512.0 0.4 1.0  PM 7K80F1D
90 438.0  -  512.0 0.4 1.0  PM 7K50F1D

Power listed is conducted and ranges from 0.004 to 0.4W max. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna collocation requirements of §1.1307(b)(3).



Mail To: